Nikon D 7100 raw files

I have just installed Elements 12, but cannot load raw files to it from my Nikon D 7100

The D7100 was supported starting with ACR 7.4 so 8.2 is new enough.
That suggests the files, themselves, have been corrupted by using an older version of Nikon Transfer or View NX, perhaps one that came with your older camera.  The obsolete versions of NT and VNX will change the metadata in the raw files and make them unrecognizable to Adobe products. 
A quick test with pictures transferred directly from the memory card to your hard-drive without being touched by any Nikon products should verify if this is the case.
If this is the problem and you need to use Nikon products to do the transferring then install the versions that came with your D7100, and quit using the older versions.
If you want to uncorrupt the files you’ve already transferred there is a utility that can do this:
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
Use the 14-bit option.

Similar Messages

  • My Nikon 7100 RAW files will not load into Iphoto.

    My Nikon 7100 RAW files will not load into IPhoto.  The computer will recognize the files once the download is complete, but fails to finalize.  My version of IPhoto is 7.1.5 and my computer is a Mid 2007 Mac Mini Model.  I have Light Room 5, but my wife and I are prefer IPhoto for basic download and sharing.  Is there a possibility  of getting the RAW files to download ?

    what version of the OS?
    You need Mt Lion and iPhoto '09 for your camera RAW support - OS X Mountain Lion: Supported digital camera RAW formats -
    If your computer will support tMavericks do the free upgrade to it and purchase the upgrade to iPhoto '11 version 9.5.x in the App store
    LN

  • New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

    New Nikon Df camera RAW files not recognized in Bridge and Photoshop.  Is there a fix?  Surely Adobe make a mistake and not keep up with Nikon.

    I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
    Would post in ACR forum and see if they know anything more.  http://forums.adobe.com/community/cameraraw

  • Nikon 1 S1 RAW Files and Elements 9

    My current Elements 9 does not support my Nikon 1 S1 RAW files - will I need a new Elements or is there a RAW update that will support this new camera?

    That needs Camera RAW 7.4, for which you require PSE11 or PSE12. Otherwise you need to download the Adobe DNG Converter (Google it) and convert the files to DNG files - which your PSE9 will be able to read.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • RC 8.6 Issues with Nikon D810 NEF RAW files

    RC 8.6 does not correctly process Nikon D810 NEF RAW files. See the following blog article for some details:
    Nikon D810 vs D800E ISO Comparison

    This is very helpful. My current workflow, until ACR 8.6 and LR fully support the Nikon D810, are to use the DNG converter and import the resulting D810 DNG files into my LR catalog.
    I have not yet tried this (traveling right now), but I assume I can still make a custom profile using the X-Rite ColorChecker Passport and it's associated software for my D810 using the RC 8.6 DNG files. This is my normal workflow for all of my other cameras in LR, but the process is direct from native RAW and not DNG (to produce the custom profile).
    Sent from my iPad
    On Jul 28, 2014, at 6:51 PM, "max.wendt" <[email protected]> wrote:
    RC 8.6 Issues with Nikon D810 NEF RAW files
    created by max.wendt in Adobe Camera Raw - View the full discussion
    Until Lightroom gets D810 support, you will need to use the ACR plugin in order to see the profiles. The DNG Converter always uses Adobe Standard, and embeds it into the DNG. Lightroom 5.5 doesn't have the D810 profiles.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image athttps://forums.adobe.com/message/6592335#6592335
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: [https://forums.adobe.com/message/6592335#6592335]
    To unsubscribe from this thread, please visit the message page at [https://forums.adobe.com/message/6592335#6592335]. In the Actions box on the right, click theStop Email Notifications link.
    Start a new discussion in Adobe Camera Raw by email or at Adobe Community
    For more information about maintaining your forum email notifications please go tohttp://forums.adobe.com/thread/416458?tstart=0.

  • Why does photoshop 12 editor open my Nikon D90 Camera RAW files only as jpegs???

    Why does photoshop 12 editor open my Nikon D90 Camera RAW files only as jpegs???

    Hi,
    Which operating system are you running on?
    What makes you think that the raw files are being opened as JPGs?
    Do you shoot RAW+JPG and opening the JPG files bt mistake?
    If you are opening a RAW (NEF) file and it doesn't show the Camera Raw screen but goes straight into the editor then it may be that your screen resolution is too low.
    What is your screen resolution?
    Brian

  • CS5 Bridge does not recognise Nikon D 800 Raw Files

    I have Photoshop CS5 Version 12.0 (x64). Photoshop recognises Nikon D 800 Raw files BUT
    Bridge does not. I have tried updates but my Apple Mac Pro does not recognise them

    That would mean that you have the ACR plug-in version 6.7 or 7.1 in the wrong place.
    You can only have one version of ACR anywhere in your installation.  If you have two, it won't work.  Look for the version(s) you have installed in Photoshop under the Photoshop menu > About Plug-In:
    Your camera has been supported ever since ACR 6.7 and CS5 can run ACR 7.1 (but not any higher version of ACR).
    The only correct path for the plug-in in CS5 is as follows:
    Very wide image: click on thumbnail for larger view.
    NOTE that the path starts with the ROOT LEVEL Library, the one right after the name of your boot drive, not your user or Home Library.
    The screen shot is from an installation under Snow Leopard, where I had CS5.

  • Why won't Lightroom 4.4 import my Nikon D7000 NEF RAW files?

    Why won't Lightroom 4.4 import my Nikon D7000 NEF RAW files?
    I even downloaded the latest Adobe DNG converter and converted all the NEF files to DNG then tried to import to lightroom - it didn't even recognise them??? What the...

    Keith_Reeder wrote:
    It's not a "wrong" error message - it's true, as far as it goes, and it's completely unrealistic to expect error messages to be fully diagnostic - they're a starting point.
    Not wrong?
    Let us have a look at the error message:
    "The following files were not imported because they could not be read"
    This clearly gives the user the impression that there is a reading error where you want to copy the files from. Is that the actual error?
    No, the actual error is that the file could not be written at the destination.
    It is possible that it is not factually wrong because Lightroom first make a failed copying attempt without giving an error message, then still assumes that the files have been copied and tries to import them, and THEN makes a failed import attempt from the destination and gives the error message. But that would never be anyone's first guess when they experience that error message.
    A much better error message would be: "The following files were not imported because they could not be copied to the destination folder."

  • HT3946 How do you get Nikon D600 camera  raw files to download INTO Apeture 3

    How do you get Nikon D600 camera  raw files to download INTO Apeture 3 ?

    The D600 is a new camera. There should be an update in the near future to accommodate it.
    This was the last one:

  • Nikon D600 NEF/RAW files/DNG 8.4 still cannot read

    Hi all, I just tried installing several versions of the DNG plug in for CS6 and it still cannot read the Nikon D600 NEF/RAW files on a 2014 MacBook Pro.  Any suggestions?  I have searched previous questions, but cannot find one on this very topic.  Cheers, Paul.

    What version of Photoshop do you have installed. If you have CS6 make sure you use CS6 menu Help>Updates. To make sure you have the latest updates.  If you have CS6 preternatural you should see version 13.0.6 when you use menu Help>About Photoshop if you hace a Creative cloud subscription you should see version 13.1.2 using menu Help>About Photoshop.
    If ACR 8.6 is installed correctly it installs in a common place that is used by both Bridge CS6 and Photoshop CS6.
    When you open a RAW file in Phoroshop or in ACR from the Bridge the ACR dialog should open and in its title bar you should see version 8.6.   You should not need to create DNG RAW file for your  NEF RAW files just to used ACR.  You only need to do that if your using an older Photoshop version and an older ACR. version that does not support your Nikon Camera NEF RAW format.
    If you have CS6 and the ACR title bar does not show 8.6 you do not have all the CS6 updates installed.  If menu Help>Updates doe not install ACR 8.6 try downloading it manually from the CC updates site and see if the manual update works All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools
    or Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
    Version 8.6
    Name
    Size
    Date
    Adobe DNG Converter 8.6
    210.7MB
    7/30/2014

  • Nikon D40x NEF raw files, Support for

    Need Support for Nikon D40x NEF raw files
    Also needed in CS2, CS3

    See
    Here!
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Why CS6 cann't open Nikon D800E NEF raw file?

    Why CS6 cann't open Nikon D800E NEF raw file?

    The Nikon D800 was supported from ACR version 6.7 / 7.1. But CS6 shipped with 7.0, so if you've never updated ACR (or reinstalled from disc), they won't open.
    Other than that - have you used an older version of Nikon Transfer or View NX? These will corrupt the NEF header so that ACR can't read them.
    There's a fix here: http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

  • NIkon 1 V1 RAW files

    Does CS6 support new NIkon 1 V1 RAW files?

    Hello! welcome to the beta!
    It is supported since Camera Raw 6.6: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html so it should be the case on ACR7.

  • Problem with camera nikon d700 .nef RAW File. Can't transfer and use it on my mac maverick os.

    Hi There can anyone help. Before this on my imac, i can use and edit my nikon d700 .nef(RAW) file format.Now after i upgade to maverick os i can't use to edit or transfer the RAW files. Any Solution. Please help me. Imust delay all my work.

    Thank you for your help I have already downloaded ACR 8.7 and tried to download DNG converter will have to back track on this as didnt recognise the file when I downloaded it. is the problem now that I need to change my files to DNG from NEF files before opening in photoshop?
    Please be patient as I seem to have got the jist of the problem but not sure the converter is on my computer what should I be looking for?

  • Problem related to PS CS6 ext. on Mac.  Nikon DSLR D610 raw file can not be opened

    Problem related to PS CS6 ext. on Mac. Installation is OK but I can't open picture from my Nikon D610 (Raw NEF format). I get a message "can not open this format ...". Checking Help menu to see if I miss an update the message I get is that I'm up-to-date but at the end Nikon D610 (format supported of course) files can not be opened . JPEG are OK but I work with raw files. Thanks

    What OS are you running: 10.x.x?
    What version of the Camera Raw plug-in do you have?  Do (About) Plug-ins / Camera Raw to find out.
    You need at least ACR 8.3 to open D610 files.  If the Help / Updates process does not work, then there is a manual install process you can do.  The page with the download is for when people accidentally updated to ACR 8.4 and need to roll back to ACR 8.3 due to their OS being incompatible, but the installer on that page works even if you haven’t erroneously updated to ACR 8.4:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

Maybe you are looking for

  • H.323 endpoint to analog phone call problem

    I have Tandberg H.323 endpoints registered in gatekeeper, Callmanager 4.2(1) and MGCP voice gateway to classic telephony. There is a problem, when I try to set up a call from H.323 endpoint to the analog phone through voice gateway. The call is set u

  • W530 Color Calibration Issue

    Every month I re-calibrate my display using the COLOR by PANTONE Color Calibrator (v1.1.0). I tried doing it today and kept getting this error, even though the tone for successful calibration always goes off: Link to picture I'll try to calibrate the

  • Birthday year bug for iphone4!!!

    As I'm entering birthdates for my contacts, I am noticing for January 1st birthdays, selecting the year is off by one year. This happens specifically when you choose the years of 1976 and years close to it. For example, my cousin's bday is Jan 1 1981

  • Can't see n95 videos on c5-03

    Hello, I bought a nokia c5-03. Previously had a nokia n95 and now I can not properly view the n95 videos on my new nokia c5-03, image and sound are cut continuously. Someone could help me? Thank you!

  • Text Modification

    Hello, I'm trying to manipulate the shape of text, similar to this image. How can I make the letters come to the same shape as the peek like on this image? Then after that, how would I be able to stretch out the letter like the last C? This is just a