Nikon D3 NEF files

I'm having problems uploading NEF files from my Nikon D3.
Anyone any ideas why? Message just reads 'files could not be read' - I thought Lightroom supported all RAW files???
Thanks , Ian Moore

And you can always convert to DNG to use it in lower versions of Lightroom. But you should be running 1.4.1 or 2.0.

Similar Messages

  • Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

    Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get photoshop error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Bridge at all.  What am I doing wrong?

    Camera Raw plug-in | Supported cameras

  • Camera Raw 4.6 Update & Nikon D810 NEF File Issue

      Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get photoshop error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Bridge at all.  What am I doing wrong?

    8.6 Camera Raw plug-in | Supported cameras

  • PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue

      Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get Photoshop CS3  error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Adobe Bridge at all.  What am I doing wrong?

    Hey,
    Before I purchased, let me get your thoughts on another option that just occurred to me which involves:
    1)Editing my D810 NEF files in LR 5.6, which I have, then exporting/saving the edited files as JPEGs.
    2) Doing any additional editing, as necessary (i.e. that might require layering or selections..etc) , with the JPEGs  with Bridge or PS CS3. 
    This method wont involve any additional software purchase now.. right?    Am I missing anything.   here?    Since my final output to my customers are JPEGs any way, wont this work?   Will I be at any disadvantage.   Am I missing anything.   here? 
    From: ssprengel <[email protected]>
    To: charles cash <[email protected]>
    Sent: Monday, October 6, 2014 9:49 AM
    Subject:  PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue
    PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue  created by ssprengel in Adobe Camera Raw - View the full discussion  
    You can buy it from here:
    http://creative.adobe.com/plans
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6795004#6795004
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: 
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. 
    Start a new discussion in Adobe Camera Raw by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • CS4 will not open Nikon D7000 NEF files; Is there a DNC that will open them?

    I have CS4 and Light Room 2
    Apparently there is no Camera Raw update for the new Nikon D7000 NEF files for CS4.
    I therefore down loaded the Adobe Digital Negative Converter Verson 6.3.0.79 which is compatible with Camera Raw 5.4 or later. 
    Using that DNC, when I do step 1, "Select the images to convert" I get the message "No items match your search".  It apparently is not recongnizing the D7000 NEF files.
    Is there another DNC that will open and convert the D7000 NEF files?

    I just bought the d7000 yesterday and was experiencing the same issue with cs4. I downloaded the DNG converter from adobe and selected the whole folder where the raw files were located (I was unable to select individual images) and it worked fine. It processed the files one by one with new name (without the $500 CS5 pricetag for now). The DNG files open in bridge and psd. Perhaps try selecting the folder?  Good luck.

  • Raw plugin 8.2 doesn't open nikon d800 nef files in photoshop cc and bridge

    raw plugin 8.2 doesn't open nikon d800 nef files in photoshop cc and bridge

    How did you install the plugin?  You may want to try reinstalling it or installing the dng converter, as that is what has the camera formats.  ACR 8.2 is just the plugin for the mechanics of Camera raw.  Normally they should both install, but sometime the converter doesn't.

  • LR 4 V 4.4:  Doesn't recognize Nikon D610 NEF files.  What is the fix for this?

    I have Lightroom 4, version 4.4 and it will not recognize the Nikon D610 NEF files.  This version recognizes my Nikon D800 NEF files.  What is wrong and what is the fix?  Thanks.

    I would expect lr6 to come out any day now though. Perhaps an idea is to use dng converter in the mean time? Don't want you to have to spend money twice in a short time.
    Sent from my iPhone

  • HELP!  iMac won't show my Nikon D800 NEF files.

    Nikon D800 NEF files will transfer from my Nikon D800 to my iMac, but they will show only as a "list" in the folder that I transfer them to.  They will not show as thumbnails, nor open with "image preview".  Tiff and JPEGs will transfer and show as thumbnails and open with all my processing programs.  But I need to be able to see the NEF thumbnails on my iMac. The NEF's will also not open in Adobe Lightroom.   Image files will open with Camera Raw and Photoshop CS6 even though they don't show as thumbnails.  Everything worked until I installed Snow Leopard.
    I have:
    Photoshop CS6 13.0  64 bit
    Camera Raw 7.1.0.354
    Snow Leopard OSX 10.6.8
    Nikon Transfer 2  Vers.  2.3.1
    Adobe Bridge 5.0.0.399
    Computer  info:  iMac Intel Core 2 Duo, 86 Gb on Hard Drive, 3 GB Ram.  Camera connected directly to computer with supplied USB cable.
    Desperate for any help. Thanks

    The same comments I gave for the D750 apply to the D5100 because both cameras are newer than what the maximum ACR 4.x version you can update PS CS3 to.
    https://forums.adobe.com/message/7054815#7054815
    Here is the list of supported cameras and their minimum ACR (and Lightroom) version:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Here is the list of Adobe programs and their range of supported ACR versions:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Cannot open Nikon D4 NEF files

    Cannot open Nikon D4 NEF files in Photoshop CS5 and Camera Raw 6.6 … any suggestions?

    I am now officially perplexed. Tried all of the following
    a) Cleaned up appdata/Adobe/Camera RAW => tried opening the RAW file, (each time a different one so I don't use the same XMP)
    b) Removed the Photoshop preferences file   =>  ""
    c) Removed Registry entry for Camera RAW =>  ""
    d) Uninstalled CS5.5 and re-installed (as suggested by Adobe Customer service folks) => ""
    DIDNT WORK. YES, I USED UPDATE FEATURE IN PHOTOSHOP TO GET LATEST CAMERA RAW, NOT RC
    e) Installed CS6, went straight for updates and it did install Camera RAW 7.1.
    Tried to open the file, same old message.
    And, I also downloaded Lightroom 4.1. Couldn't import the files. Went straight for the update, nope, it said I don't need any.
    It's now been 48 hours into this problem and never been more frustrated.

  • Cannot open Nikon D4 NEF files in Photoshop CS5

    Cannot open Nikon D4 NEF files in Photoshop CS5 and Camera Raw 6.6 … any suggestions?

    Thanks for your reply
    .... strange? in the document you mention above the Nikon D4 is not mentioned as being newly supported and yet when I went to get info about this:
    http://www.adobe.com/products/photoshop/extend.html
    It says that the D4 should be OK in Camera Raw 6.6.
    I confess to being slightly confused.

  • Will there ever be an upgrade for Lightroom 3 that will work with Nikon d800 NEF files?

    Will there ever be an upgrade to Lightroom 3 that will work with Nikon D800 NEF files?

    Why not use Lightroom 4 instead?
    I mean, assuming you can get it running fast enough, you'll usually get better results with PV2012 - right? And in the cases where you prefer PV2010 (if there are any), it's there too...
    R

  • Nikon D600 NEF files and Photoshop CS3

    Hi,
    I am using Photoshop CS3 and cannot upload Nikon D600 NEF files--obviously a gap between the two debuts.  Are there any suggestions, or am I stuck upgrading?
    Thanks

    You could get Lightroom 5, then output your files as tiffs to be opened in CS3.  I haven't used the standalone DNG converter, so I'm not sure if that gives you the option to save as a tiff also.  You could try the dng converter first to see if you can save as another file type, or use a legacy DNG version that is conpatable with CS3.

  • Help with Nikon D600 NEF files, CS6, and ACR 7.3 beta

    I have been unable to open NEF files from my Nikon D600 in Photoshop CS6, and ACR 7.3 beta.  Any suggestions/guidance would be much appreciated.
    RAW was set to 14 bit color, but I can't see that that would matter?

    From discussion with others, it would appear that the files were corrupted during transfer. 
    I have some suggestions that I will try tomorow.
    I have no problems opening old Nikon D700 NEF files in Photoshop CS6, and when ACR opens the file it indicates I'm using ACR 7.3 beta.
    Regards,
    Erich

  • Problems importing Nikon D4s NEF files to LR5, Bridge, Photoshop CC / CC2014?

    Is anyone having a problem importing Nikon D4s NEF files into Lightroom 5, Bridge or PhotoshopCC / CC2014 or Photoshop5?
    I am running the latest updates: LR5.5, RAW 8.4, Photoshop CC latest update which, as far as I am aware, are all supposed to support the D4s NEFs but none will read the files; LR5.5 just shows "Preview unavailable for this file", Bridge just shows a blank and Photoshop shows "Photoshop cannot open this file".
    I have tried 14 bit, 12bit uncompressed; but only jpegs show up??
    All running on an iMAC 2.93Ghz Core i7 mid 2010; 16GB Ram and also on a Mid 2011 Macbook pro 2.2Ghz core i7 with 16GB Ram. 
    Is this camera supported fully yet?
    Is anyone else having similar problems?
    Any ideas?

    You probably used Nikon software to transfer the photos to your computer. This causes corruption of the file so taht Adobe Software cannot read it.
    To uncorrupt the files, see Fix Corrupted Nikon NEF Images

  • Just imported picture library from Aperture - Can't view Nikon D800 NEF files in LR5.7.1

    Just imported a large picture library from Aperture to LR 5.7.1- Can't view Nikon D800 NEF files in LR5. The projects and files loaded - but no thumbnail view of the image

    I have a Nikon D50 nef on my desktop. Double-clicking on it opens Photoshop, which launches Adobe Camera Raw. If you get that far and can make adjustments in the ACR panel, you are fine. That's what opens first.
    Then you click "Open" in ACR and your nef opens in Photoshop and the document tab on top gives the .nef extension. You make your edits there, but if you close Photoshop, you won't save it as nef, it won't be in the Save file list. You save it as psd for example and close Photoshop.
    You now have a nef with develop settings on your desktop and the psd you saved out of Photoshop.
    All perfectly normal as J.J. said, Photoshop will edit the nef file, but it will be saved in a format other than nef.
    Gene

  • Has anyone noticed 9 Horizontal black lines in Nikon V3 NEF files in the shadows?

    Has anyone noticed horizontal black lines in Nikon V3 NEF files, as shown in the image. I have opened the image in Aperture and there are no lines, also tried 2 different computers.

    The lines are there in the raw data, and not something Adobe is doing.
    Here is a screenshot of the central area in RAWDigger raw-analysis software, with things set to stretch the channels much as a high-ISO image would have:
    What I can't tell from the images is if these lines are in optical path, like streaks on the sensor, or if they are added by the process that reads the raw data--read pattern noise.  It is possible that Aperture would have access to "dust delete data" if such a capability exists for the camera and is interpolating around the artifacts or if there is some other reason Nikon software doesn't show them.  I don't know.  You may be able to find information online but rest assured it is a camera issue and not an Adobe issue unless you're asking why Adobe software isn't fixing the problems automatically like Aperture must be doing, and I would guess Adobe doesn't have any way to fix sensor anomalies that aren't more than 1 pixel in size--single hot or dead pixels.
    Unless Nikon can replace or service the camera to remove such things, I don't know what else to suggest.

Maybe you are looking for

  • Acrobat 7.0 printing funny characters

    I'm running Acrobat 7 professional. I print out .pdf files that are scanned to me.  They are registration forms that are filled in at a medical office.  So the questions are type written and the answers are hand-written. They print out fine 99% of th

  • Use of BAPI_ACC_MANUAL_ALLOC_POST

    Hi all, I have a little problem with the CO-BAPI BAPI_ACC_MANUAL_ALLOC_POST. I think all fields are filled correctly BUT if I test the BAPI an Error occures: "Enter an amount" Message BK 048 What did I do wrong. What additional field has to be filled

  • After Effects CC 12.2.1.5 Does not snap out edge of comp

    When I upgraded to 12.2 I found that your new "Snapping" feature does not snap to the outside walls of the comp. Steps: Create comp A Create comp B Drop comp B into comp A Scale down comp B layer to 1/3 of the size Turn on snapping and try to snap co

  • WLS Datasource

    Hi, I am storing a reference to the DataSource in a Singleton object. Does WLS synchronizes access to the DataSource internally? Should access to the DataSource be synchronized if multiple threads are calling the DataSource to get connection?

  • Window.location in AIR 1.5 Ajax

    Hi, Back in July I developed an AJAX AIR app in AIR 1.0. I had several pages in the app and used window.location to move from page to page. I just finished making a bunch of updates to the app, and while it works fine when I preview it using Dreamwea