Nikon D3 Profile "Camera Landscape" sometimes shows ugly violet cast

Hi
Lightroom 2.2 with Camera Profile for Nikon D3 "Camera Landscape".
RAW images with a deep blue sky and some yellow/orange cast render in LR with an ugly violet cast.
Has anybody else also seen this behaviour. Apart from that, I am very happy with the profile "Camera Landscape", but for this kind of images, it is not usable.
Any ideas?
Has anybody else observed the same?
For an example, follow this link:
http://www.pbase.com/hpgisler2/cameraprofile
(look at the sky above the clouds around the sign-post).
Regards
HP

>RAW images with a deep blue sky and some yellow/orange cast render in LR with an ugly violet cast<<br />
I raised this issue at the time of the Beta 2 introduction. I my case the problem was a violet tinge introduced into grey areas of D3 NEF files. Adobe asked for examples which I submitted, and which they acknowledged had a problem.
Nothing was altered in the final release - which for the Nikon D3 at least is identical to the Beta 2.
As it happens I was not too unhappy as I can - and do - continue to use the Beta 1 Camera profile as my default. And funnily enough I never experienced highlight posterization issues either then or now.
I did however wonder - for a very little time - at the introduction of the final release, just how much of a "Public" Beta these were.

Similar Messages

  • My profile in camera calibration in lightroom 5 show only embedded. How to set profile to landscape or portrait. I can't find any other option, only embedded.

    My profile in camera calibration in lightroom 5 showing only embedded". How to set profile to landscape or portrait. I can't find any other option, only embedded. How to install all profile's?

    The profiles are there, but they only display and are only available for raw images. The image that you are highlighting is either a JPEG or some other non--raw file format. The only profile available for non-raw images is the embedded profile.

  • LR3 camera profiles loaded but not showing in develop

    I checked in - documents and settings\all users\application date\adobe\camera raw\camera profiles and Nikon D700 and many more seem to be loaded. However these do not show up in camera profiles in "develop". Anybody any idea why not ?

    Hi Beat. I am shooting with a D700 in raw. In the develop area of LR3 and under "calibration" there is "profile: ". In the drop down menu I currently see ACR 4.6 / Adobe standard/ Camera D2X mode 1,2 and 3. It also incudes Camera landscape neutral / portrait / standard / vivid. I normaly use Camera standard as this gives me about what I want, but I have only had LR3 for a couple of weeks now and am experimenting.
    If you go into the Adobe LR3 programme under documents and settings and get to camera profiles you see two options under "camera profiles"  -- ADOBE STANDARD / CAMERA
    CAMERA is from Adobe shipped with LR3 which has 61 cameras showing which are Canon/ Nikon (to include D700) / Pentax and Leica.
    IF as you say LR3 knows I am shooting with a D700, why does the camera profile for D700 not show in LR3 in develop and in the area stated in my first line above, or am I misunderstanding somethig here ?
    All the best Alan
    London UK.

  • Profil camera v2 for Nikon D4s in Lightroom CC

    hello,
    I just installed lightroom 6 and I find two versions of the profiles for the Nikon D4S.
    Example, there is the profile "Standard Camera" and the profile "Camera standard v2". What does this version 2 of the camera profile?
    Tank you

    There have been second versions of profiles for certain cameras. The first profiles didn't meet the needs of the users, so a second profile was created. The original was retained for those who had used the profile and wanted to continue to do so.

  • When I send txt msgs from my phone the message shows on the recipients phone as if it came from my gmail account. What causes this? I'd like to correct this because when I receive their reply it sometimes shows up as an email.

    When I send txt msgs from my phone the message shows on the recipients phone as if it came from my gmail account. What causes this? I'd like to correct this because when I receive their reply it sometimes shows up as an email.

    I go into Messages there is a Send & Receive selection.  My email address
    is showing.  I select Send & Receive and mu phone and email address is
    there.  A check mark is next to my email address.  Is this the problem?  I
    was unable to remove my email address.  I tried to remove my email address
    but the response is "This email address could not be removed."
    Thank you for your response.  I will stand by for your next request or
    instructions.
    Steve
    On Fri, Jun 27, 2014 at 10:54 AM, Verizon Wireless Customer Support <

  • ACR Nikon D3X profile not listed

    Hi I have Adobe Bridge CS6 v 5.0.2.4. I've been using this for a few years with my Nikon D2 series cameras. When I open up a RAW file from one of these cameras, I have a choice of camera profiles for Nikon D2 cameras in the camera profiles drop down menu. No problem. However, I've recently added a Nikon D3x to my kit. When I open up a RAW file from this camera there is no profile listed in the drop down menu in ACR. I've checked on the Adobe RAW compatible cameras list and the Nikon D3x is confirmed as compatible but says I need a minimum of version of 5.3 camera raw plug-in for the D3x. When I check for updates from Adobe Bridge I'm told that I'm already running the most up to date version. Can anyone please advise how to resolve this? Thanks

    Hi ssprengel and JimHess, ACR version 8.6.0.254. No when I open a RAW file from my D3x there is no profile for this in the drop down menu only Adobe Standard, a list of my D2 cameras and modes 1, 2 & 3 and portrait, landscape, vivid etc. No D3X. I'm just wondering if I'm missing something, should I be loading up the profile from somewhere? or should ACR recognise the camera automatically. What's puzzling me is that the Bridge/compatible cameras list says I need a newer version of Bridge than the one I'm currently running, but I don't know how to get it. The return on the 'check updates' tab says I'm running the most up to date version. Funny thing is I had one of the support people look at this via the chat service, eventually they asked me to send a RAW file from my camera so that hey could check it at their end. I got an email back later that day confirming that they couldn't see the D3X profile either, case closed..BTW, just to clarify, I have Bridge v 5.02.4 x64 . My version of ACR is 8.6. Thanks for your help, apologies if I'm missing something simple

  • Built in iSight camera no longer showing up or recognized by iMac

    Hello there - I have a white 1.83 GHz Intel Core 2 Duo iMac with a built in iSight camera, and the camera is no longer showing up, or is not recognized by the computer any longer. Very strange! The little green LED by the camera is not lit any longer, and the camera is not recognized any longer by Photo Booth, iChat AV, or any of the other apps that would use the camera. This is a real pain, because I am leaving for France in a couple days and am taking my MacBook Pro with me, and am hoping that I can use iChat AV to talk to my kids at home on the iMac. I do have an extra iSight camera that I have hooked up to the iMac and can use in a pinch, but I really want to use the built in camera on the iMac. Any hints / ideas / suggestions on what to do for this problem would be greatly appreciated. Thanks!

    No, unfortunately that did not help. I did the following...
    1. See if the issue is application-specific. - Nope. Camera is not recognized in any of the apps that it should be recognized in, I tested iChat AV, PhotoBooth, ImageCapture, and iMovie.
    2. See if the issue is user-specific. - There's only one user account on this Mac, so I couldn't do that.
    3. Find out if the computer recognizes the iSight. I went into System Profiler and checked the USB profiler, and the camera does not show up.
    4. Reset SMC or PMU. These just looked like different ways of restarting, which I did multiple times.
    I have also run my Software Updates (on OS 10.5, which I did with a clean install from an OS 10.5 DVD by the way) and still no camera. This problem started happening with the original OS 10.4 (which it came with) and I was hoping a clean install of the OS would help, but no.
    I'm wondering if resetting the PRAM might help, but I can't remember those keys you hold down while restarting (was it Apple-Option-P-R ?) or if that is just reaching waaaaay back to the pre OSX days.
    Here's the kicker though - if I plug in a FireWire iSight camera, all is well. I'm really hoping that the camera isn't jsut dead, but it's starting to look that way. Would Disk First Aid or maybe DiskWarrior help?

  • Current Lightroom / Camera Raw Camera Profile for Sony ILCE-6000 inaccurate: green cast in shadows! Capture one better! Please fix it!

    Hi folks from Adobe!
    Please take note that the current Lightroom / Adobe Camera Raw Camera Profile for the Sony ILCE-6000 is very inaccurate: There is a serious green cast in the shadows!
    Capture One Express for Sony (which is free by the way) renders a lot more correctly!
    Please correct this, since I'd rather buy the coming LR6 because of keeping my established workflow instead of going the Capture One route.
    A good example can be found in the dpreview forum "LR5 A6K shadow pulling, a mess! Adobe LR is broken? "
    Or search for Philp Reeves 3 weeks with the Sony A6000 review "3 Wochen mit der a6000", where he compares it to the Sony A7, using both times Lightroom to push the shadows.
    The Sony A7 is fine where earth looks like brown earth, the A6000 picture looks like grass instead.
    Please fix this! This is a high volume camera frequently bought by enthusiast or as second body for FF photographers. That would be really great!

    I am talking about the two raw files linked in the very last post of page 6 of the Reeves comparison thread, not JPGs or screenshots of unknown manipulation.  In LR they both say f/11 and ISO 100 and have a similar tone, but one is shot at twice the shutter speed as the other.  This side-by-side is using Adobe Factory Defaults for each image where the profile is Adobe Standard, the toning sliders are all 0, tone-curve linear, and the Sharpening and Color NR are 25:
    However, when I look at the camera-embedded JPGs, side-by-side, the 1/80th image on the left is darker than the 1/40th image on the right, as expected given the reported shutter-speed difference:
    And it is indeed the darker image that has more shadow problems, also as expected.
    When I do manipulate the darker (a6000) raw file in LR, I do see that the shadows are greenish when brightened unlike most other cameras which usually show magenta, which is the combination of the blue and red sensors showing more noise because there are half-as-many photosites as compared to the green, so I am seeing what people are complaining about and would expect shadow noise to be purple not green, I'm more concerned that these two example raws aren't actually comparable due to apparent differences in exposure.  It is also odd that the lens listed in LR is different than the lens listed in the filename, so either someone has mistakenly or deliberately renamed the file wrong or someone or something has changed the EXIF parameters that LR is reporting to be the same when they're really not.

  • Why the lens profile list can't show ALL lens profiles items from "LensProfiles 1.0" folder?

    When I add a new lens profile - Samyang 14mm f2.8 - .lcp file into the "LensProfiles > 1.0" folder, I appear there are many lens profile items can't show in the Lightroom lens profiles list.
    Please tell me how can I add these items into the LR lens profiles list........... thanks!!!

    Sorry my bad, should have put.
    Your custom Camera Raw & Lens Profiles should be installed to the User folders…
    Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
    When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
    Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
    Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
    For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
    The camera and lens profile file extensions are:
    .dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
    .dcp—camera profile
    .lcp—lens profile

  • Workflow photoshop cs3 on mac with nikon d200/300 camera

    I already asked this question at the mac forum in here ...it dealed with the problem that i have noisy pictures anyway after having changed to ps cs3 under mac.Istill make the pictures with my nikon d200/300 camera and i have not chosen any higher iso number. I usually take the pictures in raw format transform them into tiff format after having finished my work and sometimes i produce jpegs out of the tiff file later on.In fact ,all the pictures have this noise effects . Has this got something to do with the colour depht menue in camera or cs3 maybe?

    Probably has to do with your default sharpening & noise reduction settings.
    If you're comparing to in-camera JPEGs then the JPEGs usually look smoother initially because the higher ISO images will have a fair amount of noise reduction applied.

  • TS2771 I need help with my camera it's shows a black screen. And I have restarted it many times

    I need help with my camera it's shows a black screen. And I have restarted it many times

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Y are not alones. Sometimes the camera fails.
    Apple Retail Store - Genius Bar                                      

  • My iphone 5 sometimes shows up a black screen

    My iPhone 5 sometimes shows up a black screen when im either unlocking my phone or playing games, ive tried restoring and doing a hard reset but it keeps happening, my phone is still under warranty for repair etc what can apple do? and what if it doesnt happen if i take it to apple? do they have to send it off to get repaired? will it cost money?

    Hello this is for sure software problem with the new ios I had lots of customers with the same issue your having that the shutter will get stuck or just a black screen etheir back camera or front camera won't work with this update. The only thing to do is wait for another update.

  • Satellite P100: task bar sometimes shows up an grey square icon

    I have a Satellite P100 and the task bar sometimes shows up an icon which I cannot understand. It is a grey square with an horizontal line near the botoom, and seems to represent a computer. Then, over the right bottom side there is a red circle with a red diagonal line across it (in the forward slash direction).
    Hovering the mouse over it does not produce any information.
    Can you help?

    just do this for me please and hit FN+F9 together, that is the key combination for turning the TOUCH PAD off and on, as I've said before it's the only one that I can see that looks like it. Here's a screenshot
    http://img137.imageshack.us/my.php?image=greyicontj9.jpg
    Is this the icon? If it is then FN+F9 will toggle it on and off, I'm sorry to say this but all the functions are in the manual, both on the computer and the paper one that came with the notebook plus you can go download them from Toshiba's site. I read my manual before I even got my notebook by downloading it first.
    If this is switching on and off by itself without you using FN+F9 then it would suggest there is a hardware fault with the touch pad or the drivers are conflicting with something on your system, I would suggest contacting Toshiba Technical Support.
    Message was edited by: GazzHo

  • Camera roll keep showing restoring what should i do?

    camera roll keep showing restoring what should i do?

    edelline wrote:
    camera roll keep showing restoring
    what does this mean what is the exact message you are receiving and when are you receiving it?

  • Camera roll empty but shows 6.1 gb.  Restored to original settings after backing up.  When I restored the backup camera roll still shows 6.1 gb and is till empty.  I imagine that the backup contains some corruption

    Camera roll empty but shows 6.1 gb.  Restored to original settings after backing up.  When I restored the backup camera roll still shows 6.1 gb and is still empty.  I imagine that the backup contains some corruption

    Hi cfgolf,
    Thanks for contacting Apple Support Communities. I agree with your assessment that something is going on with that previous backup. If you restored from that backup and the issue continues, I would recommend restoring and Set up as new. Before you restore, make sure you Transfer content so that you can sync it back after setting up as new. The instructions on how to Transfer content and Set up as new are both listed in this article.
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/ht4137
    2. Transfer content
    Before you erase your device, take a few minutes to transfer your content from your device to your computer to ensure that all your critical data is safe.
    6. Set up as new
    Complete the setup assistant. When prompted to set up your device, select Set Up as New iPhone and tap Next to continue.
    Skip the Apple ID sign-in, in case the original issue was related to any of your content on iCloud.
    Note: After setting up as new, you will need to enter the Visual Voicemail password for iPhone (on carriers that support Visual Voicemail). If you've forgotten the password, contact your carrier to help you reset it.
    After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
    If the issue is still present, you may want to contact Apple Support.
    If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
    Cheers,
    -Joe

Maybe you are looking for