Nikon D3 tethering, keep losing camera connection

Anyone running into this problem?  I keep having to turn off the camera to get it connected. 
The software is working great and I replaced the USB cord with a USB 2 with the little power booster/capacitor(forget what it's called exactly).
That was recommended by tech guy, but same problem persists in L3.
It happened a couple times with Capture One and Nikon software, but only when I was working those programs hard. 
L3 seems to be doing this regardless of how hard I'm working it. 
I'm running 4gb OSX Snow Leopard with L3 only on.
Got a huge shoot Monday, so looking for any possible answers/solutions.
Thanks, matty

A Booster is only needed if the signal quality on the cable gets very bad, due to very long cable or a cheap cable. It certainly never will be able to improve anything regarding the speed of the connection.
Another thing is if you have a Hub, which can be powered from the USB port of the PC or have an own power supply. A single USB port always is limited to 500mA. Therefore, if you use a Hub without a power supply the connected clients have to share the 500mA from the PC port. That can lead to problems if one of the clients needs more power than it can get. IMHO, it's never a good idea to use Hub's without power supply which will allow for 500mA on every port of the Hub.
As a best practice, always connect the camera directly to a USB port of the PC with a good quality USB2 cable.

Similar Messages

  • IMac keeps losing network connection

    My iMac keeps losing the connection to my AirPort very sporadically, but very often. I keep having to open Network Assistant, choose the AirPort and the network, and re-enter the password. I then get a message that my network connection appears to be working correctly, which it then is. This could happen several times in a few hours.
    I have tried creating a new network, but it still happens. We have 6 other devices on this network and do not have a problem with those devices.
    Any advice?

    LB60 wrote:
    What am I looking for in the window that pops up?
    here's a (very crude) screen shot of an iStumbler scan on my MBP
    my network is called pegasus. see that it broadcasts on channel 11 (2.4 GHz band) ? see also that there are six other networks broadcasting on the same channel ? now, ideally i would change my channel to broadcast on "5" or "6", but since there are so many networks around, even those would give me interference from other networks nearby.
    in the end, i decided to hardwire (using ethernet cables) most of my devices to my router (time capsule) in order to avoid interference alltogether.
    also, there could be closed (hidden) networks around that only KisMac would be able to pick up.
    lastly, as the read about *wireless interference* revealed, there are other sources that could interfere with your network performance: microwave ovens, cordless phones - heck, even enabling bluetooth on your very own Mac could be a source.
    as an alternative to running ethernet cables throughout your place, you could consider *powerline adapters* _*such as these*_.
    JGG

  • The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't work.  All software is updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

  • Can't re-order my queue on Netflix and keep losing the connection

    I'm having so much trouble with Netflix!  I can't re-order my queue, I keep losing the connection, and it's painfully slow. Is Netflix known to be unstable on iPad? Other internet connecitons seem to be fine. 

    I rarely have problems on it - I do occasionally have drops in video quality, but nothing consistent. It does require a very strong and stable network connection, and I also wonder if they have periodic "crush time" incidents on their end, considering the rapid growth of Netflix streaming.
    Updating the queue is a pain on it - you can't do it on the app, and have to go to their website. I generally find it easier to do on a computer.

  • I upgraded Lion recently to 10.7.3. Since that time I am having trouble with my wireless connection. All other devices are fine, but I keep losing the connection since the upgrade.

    Recently I upgraded Lion to 10.7.3. Since that time I have been having a lot of trouble with my internet connection. I keep losing the connect and have to go to diagnostics and turn it back on. Is anyone else having this problem?
    Thanks, Pat

    I'm afraid there are numerous threads on here discussing this problem. I posted in this one earlier that has a couple of suggestions, but the real solution will hopefully be provided in an update from Apple:
    https://discussions.apple.com/message/17589686#17589686

  • IPhone 4 keeps loseing wifi connection

    Iphone 4 keeps loseing wifi connection and none of  my other household devices lose connectivity. How do I fix this?

    Same here.  Issue is with random routers not in same household.
    5.0.1 issue needs an update soon!

  • My iMac keeps losing the connection to my chosen Airport Wi-Fi network.  Anyone know why this happens?

    My iMac keeps losing the connection to my chosen Airport Wi-Fi network.  Anyone know why this happens?

    Close all Apps and see if Activity Monitor shows any processes runnung.
    Not that I think this is the cure but have you tried these resets:
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.
    PRAM RESET
    Zap the PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

    I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

    Plenty of suggestions.. only you can find out which one is correct.
    What model AE? What firmware?
    Since Panasonic TV is not apple it will use SMB windows type networking.. everything but Apple does.
    Are the names in the AE all SMB compatible.. ie short.. max about 20 characters.. no spaces and pure alphanumeric.
    Is the security set to WPA2 Personal with a pure alphanumeric password of 10-20 characters.. more is fine if you suffer paranoia but isn't needed.
    Fix the wireless channels.. so it doesn't flip flop like a dying fish.
    There are only 3 channels for 2.4ghz that do not overlap, 11, 6, 1  although someone suggested 8 works well if you have heaps of interference. If you live in flat/apartment building you have heaps of interference.
    Lastly is it stable if the distance is 3M direct line of sight?
    If not then get a high power wireless AP and use that instead.

  • My apple tv keeps losing the connection to iTunes.

    apple tv keeps losing the connection to itunes

    Hi I have all my appletvs set to NEVER SLEEP - go to your appletv settings/general/sleep after and choose never sleep. Since doing that I have had no problem with them. Also I leave my 2010 macbook pro running itunes and permanently on and open - it is my main homesharing disk. I give it a sleep every now and then when not using appletv.
    Try that first anyway.

  • Do they have plans to fix the bugs with Yosemite.  I keep losing internet connection on my Mac Book

    Ever since i installed Yosemite on my Mac Book pro i keep losing internet connection.  Should I go back to mavericks because I just hate this Yosemite or do they plan to fix the bugs soon?  I did a complete clean install and I am still having problems.  I see a lot of complicated solutions and I am not that tech savvy to go into my settings.  Thanks

    All software has bugs. The first release (which you have) will be the worst.
    Many advocate not upgrading to a new operating system until it's been out for 3 months or longer. In the Windows world many recommend not upgrading until a full year has passed.
    So yes, most / some bugs and glitches will get fixed over time.   If you wish to reduce your difficulties in the future wait a while before installing ANY new OS.
    I suggest you post specific details on your Internet problems. How are you connected etc.

  • TS1398 My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed!  My iPhone 4s and daughters'  ipad2 have no problems at all. Any ideas anyone?

    My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed!  My iPhone 4s and daughters'  ipad2 have no problems at all. Any ideas anyone?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I keep losing my connection and getting "can't find server" messages. Any suggestions?

    I keep losing my connection and getting "can't find server" messages. Any suggestions?

    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

  • I keep losing the connection on my apple mouse

    I keep losing the connection to my apple mouse. The batteries are ok, but the connection still drifts in and out. Any suggestions?

    You say the batteries are okay.    Here are a few notes I've put together.
    Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are more likely to give a depleted performance and may be of irregular size, often leading to connection problems.   Apple’s own brand, Eneloop and Energiser appear to be the best.
    Rechargeable batteries for the standard Magic mouse are unlikely to exceed eighteen days before needing a recharge although the mouse itself can be a limiting factor.   I have seen reports that some Logitech mice vastly exceed this.    Apple may suggest more in their sales blurb but this is a realistic expectation.   The benefit (if you are organised) is that you can always have charged batteries available.   Regular batteries will give you between 25 and 35 days before they need to be replaced.
    Note.  Never mix old and new batteries or rechargeable and regular.   The notes above are based on my personal experience, not shutting down my machine and using it for around four hours per day. 
    Note.   Monitors do not always faithfully report battery strength, particularly the rechargeable ones.  
    When checking your mouse or keyboard batteries ... Turn off the device. Remove the batteries, Clean the terminals both inside the battery compartment and the batteries themselves. Replace or renew both batteries. Turn on the device.   You should get a blinking green light if the device is paired. Click the mouse to activate it.  The green light becomes steady.

  • I keep losing Internet connection on my ipad 4 can anyone help?

    Can anyone help? I keep losing Internet connection on my ipad 4 especially when the battery is running down

    Hello there, CrumbleWeed27.
    The following Knowledge Base Article should help with troubleshooting WiFi on your iPad:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • TS1398 iPad 2 keeps losing wifi connection about every 3 minutes no matter where I am in my house. Very annoying. help?

    iPad 2 keeps losing wifi connection about every 3 mins no matter where I am in the house - Help?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

Maybe you are looking for

  • Plugging 2011 Macbook pro into my HDMI TV

    Hello all. I am about to buy a 2011 13" Macbook Pro. My first Mac. I have done some reading on the mini display port and it's computability with HDMI. From what I've read it is also known as DP++ and it passes the signal straight through as HDMI with

  • Java update 1 for MAC OS 10.6 caused problems

    Hello, Today I installed the new java update 1 for Mac OS 10.6 and my eclipse is no longer working. Actually, the eclipse itself is starting up okay, the problem is when I try to startup jboss AS to start working I get the following error: ERROR: Thi

  • New youtube videos detail page

    Last time I generated my app I found the new detail page for youtube videos, with the WP 8.1 player. Seems cool, but it have many many problems: - The layout is different from the rest of the app (small letters in title and description, icon and name

  • TRAVEL MANAGEMENT and ESS help required

    Hi Can anyone help me how to configure TRAVEL MANAGEMENT and ESS in IMG Please help. Regards Sonu

  • When i delete an App it won't delete in my iCloud backup options

    When I delete an app and I look at the iCloud backup settings the app is still in the cloud.    But I want that the app is automatically deleted from icloud