Nikon D3s import problems

Trying to import NEF files from a Nikon D3s but only get error messages in LR 2.5. JPEG works fine. Any way around the problem or do I have to wait for a upgrade?
Michael Fränneby

No, the LR3 beta isn't the one.
Look here.
Hal

Similar Messages

Lightroom 2 won't import Nikon D3s files

I work with Photoshop CS4 and have upgraded the camera RAW to v5.7 in order that Nikon D3s files can be used, but Lightroom 2 doesn't seem to be able to import these NEF files. Where can I update Camera Raw in Lightroom and how do I do this exactly?
Thank you

Thanks; I ordered the upgrade.
Tony
Date: Sat, 11 Dec 2010 15:06:11 -0700
From: [email protected]
To: [email protected]
Subject: Lightroom 2 won't import Nikon D3s files
The A33 isn't supported until LR 3.2. So, if you posted to this thread because you are using LR 2, then that's your problem.
>

Nikon D3s RAW files are underexposed by Lightroom / Camera RAW

I'm used to shot RAW files only.
I recently bought a D3s, alongside with my D700 and I noticed D3s files were darker than D700 ones, by about 1/2 or even 2/3 stop. Initially I thought the problem was one of the cameras, but after some tests I found the problem is my RAW converter. Infact this happens only with NEF (RAW) files, and if I shot a RAW+JPG image, the D3s RAW file opened in Lightroom 4 (or Camera RAW) is underexposed if compared with its JPG on-camera version.
I think no camera setting is affecting this behaviour. I reset either the D3s and the D700. No D-Lighting is set on-camera. This happens only with the D3s and only with Camera RAW and Lightroom.
Other RAW converters display the D3s RAW file correctly exposed, the same as its JPG version, and the same as the D700 RAW and JPG. I tested so far Capture One, DxO Pro Optics and Raw Therapee.
Color profile used is custom, but I tried using Adobe Standard and the result is the same.
Default develop settings affect only color profile and sharpening, and I got the same problem on a fresh new installation of Lightroom where no default develop settings are set.
If anybody with a D3s can check if his NEFs are underexposed if compared to their JPG versions when opened in LR or Camera RAW, I would appreciate that much.
Any idea about the origins of my problem would be great.
Thank you.

alessandroavenali wrote:
I know, DdeGannes, but a different rendition of 2 pro cameras at the same settings is a bit frustrating.
Would it be better to underexpose the D700 while shooting, or setting a default -0,5EV on every imported picture, if the problem goes on?
Moreover, seems the Nikon D3s ISOs need to be pushed +2/3 to obtain the same exposure as the D700 in LR workflow. So the advantage of this great sensor could be lost.
I'd like to know more about D700 and D3s rendition comparison in LR/ACR at same settings.
It's not unusual for two camera bodies of even the same exact make and model to have Exposure differences of up to 1/3 EV, which is very noticeable. Ditto for White Balance differences. For Example:
Camera 1 is +1/3 EV and Camera 2 is -1/3 EV = 2/3 EV Difference
Camera 1 White Balance is -500KTemp and Camera 2 is +500K Temp = 1000K Difference
Tack on minor differences between the LR Camera Profiles and it will get much worse if heading in opposite directions, as above.
The only way to compare the raw NEF files from two cameras is to use a RAW converter that applies NO profiles, NO Gamma Correction, or any other modifications to the raw pixel data. See may post here for information on 'Rawnalyze:'
http://forums.adobe.com/message/3952812#3952812
You can download it here:
http://dave-anderson-photo.com/files/software/Rawnalyze/Rawnalyze_2.10.4.0.zip
Online manual here:
http://www.oitregor.com/numeric/Rawnalyze/Rawnalyse_doc/datas/RawnalyzeGuide.htm
None of the external links in the manual work, but nothing to worry about. If you have any questions on how to use it let me know.
I believe the Nikon D700, D3, and D3s cameras are supported in Rawnalyze 2.10.4.0. If not you can convert the NEF to DNG.

Fix corrupted Nikon D3s files in FCPX

Shooting video on a Nikon D3s and there always seems to be one or two corrupted files in each video folder.
Video is there, but the small icon is a QT logo instead of a video thumbnail like all the others. These files cannot be imported.
In the past, the fix was to trim the last frame off the video file using the in-camera editor, save as a new file, then it will work.
Problem is, the cards were re-formatted long ago. Tried simply placing the video file on a card and putting that card in the camera, but the camera sees it as a blank card.
Is there a way to:
Get these video files back on a card that the camera will recognize, or...
Somehow fix the corrupted files in the computer?

No, they just have the red panes indicating that the projects are not linked to their source media.
After reviewing the White Paper on updating to 10.1 (something I should have done before updating) I think I can update my backup version then move the (hopefully) uncorrupted events over. In the end, these are old events that I already have edited and published, so it's not that big of a deal.
Steve

Reds in Lightroom 2.6 with Nikon D3s are horrible

Just started using a Nikon D3s and the reds in Lightroom are horrible -- oversaturated and too red. For example, oranges look red. The JPEG previews actually look fine so it's something about the RAW program.
I compared to Nikon D3 and D3 has no problems.
Anyone else have this problem? Is the D3s profile for LR 2.6 messed up?

What immediately strikes me is that the exposure on these 2 images is very different and that your white balance is not the same in both. One of the strange things with Lightroom and ACR is that the rendered hue depends quite strong on the original exposure. Your D3 image is at 1/3s, f8 and the D3s image is at 3/5 and f8, one stop longer. At the same time, the D3s image is darker. Looking at it, that is because they were taken 1 hour apart and the light clearly changed completely judging the shadows from the chair. If you take the jpegs and white balance on the Whibal cards, the reds pull together significantly. It is not surprising that two different cameras judge white balance differently, especially if you shoot the image at different times. You will probably get closer results than me with the jpegs if you start with the RAWs and white balance on the whibal. Then if you also equalize the exposures based on the whibal greycard, you'll find that the reds are closely the same, except for the obvious difference in lighting direction which causes some highlights on the fabric in one image and not so much in the other. There also seems to be a small difference in overall saturation which is par for the course and probably has more to do with the different lighting conditions.
This is really very close for two completely different sensors considering the non-equal testing condition. The differences are on the scale of the difference between two cameras with the same model number! I would redo your test in better controlled lighting conditions and make sure the exposures are equal.
If you want to get closer results, the only way is to shoot a colorchecker and create profiles for both. Otherwise you'll keep subtle differences in color no matter what you do.

Why won't camera raw v4.6.0 open a Nikon D3s raw file?

I have a new-used Nikon D3s and Photoshop CS3 extended. I am using plug in camera raw version 4.6.0. I can see the raw file in bridge. When I double click the thumbnail photo it goes to a window in Ps that says, "Could not complete your request becasue it is not the right kind of document."
Any ideas on how to solve this problem?

You should know that the rendering, capabilities and performance of the current 7.x and 8.x versions of ACR are so far superior to their predecessors, that you will be leaving a lot of image quality on the table if you choose not to upgrade.
Some of us even found ourselves re-converting and re-editing some of our raw files that had been edited in previous versions of ACR, and even re-considering working on some that we had rejected because we deemed the dynamic range to be too extreme to render adequately.
Incidentally, what Bridge is showing you is the JPEG preview embedded in the raw file by the camera, not an ACR-rendition of the raw NEF file, so that has nothing to do with what the image will look like in ACR one converted.
Message was edited by: station_two

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Final Cut Pro/GY-HD111E import problems?

Final Cut Pro/GY-HD111E import problems?
With a brand new Mac Pro and very latest Final Cut Studio complete with updates I'm having a little problem trying to import footage directly from a JVC GY-HD111E (yes I'm in PAL land, UK) via FireWire into FCP.
Footage is 720p/25p and timeline is set up in FCP that way.
I'm doing a 'capture now'. The first clip I'm trying to import is about 45 minutes long with no cuts/breaks whatsoever.
What happens is after about 60 seconds or so, it FCP automatically breaks the clip for no reason and starts a new one, trouble is, when it does this I lose about 4 seconds of footage at that point.
It continues to break clips randomly, sometimes after 40 seconds or so, sometimes after 95 seconds, but usually between 30 seconds and 2 minutes and each time it starts a new clip I lose between 1 and 6 seconds.
As I say, there are zero breaks or cuts in this clip, I have a 45 minute clip that was shot in one take, not even a pause anywhere.
Is this a JVC issue or a Final Cut issue?
It's a pain as it simply means I can't import my 9 hours of footage hence I can't get on with this project.
Any ideas why this phenomenon is happening?
Thanks guys.

I mean I get the same errors.
Let me explain again.
There are NO start/stop/pauses in this clip.
I'm trying to import just ONE clip with no breaks, again, there are NO start/stop/pause, it is one continuous clip of 15 minutes duration.
The JVC creates some sort of errors at the Firewire output stage, it drops frames or other errors, FCP gets confused and creates a new clip, even though it is the same clip, but due to the GoP structure, it looses a few seconds too hence I can't import the footage as I keep loosing bits here and there mid clip. It is randam, every 30 to 100 seconds or so it will do this.

Annoyed with JVC/Final Cut Pro import problem; will they ever fix this?

Annoyed with Final Cut Pro JVC import problem; will they ever fix this?
I've shot footage on JVC GY-HD111E in the UK in 720p/25p PAL mode.
I'm trying to import lots of short clips (average 10 seconds) into Final Cut Pro (latest version with 720p/25p support) with a new Mac Pro maxed out with ram and 3 extra internal HDs.
Problem is, on a scene-break i.e. pause/stop, Final Cut detects this and creates a new clip, but it takes about 5 seconds to 'searching for media" before it starts the new clip. Because some clips are only very short, this 5 second delay sometimes means I only get the final few frames of a clip, rather than the entire 5 seconds or so of it.
JVC UK are blaming Apple and are saying it is up to them to fix it as Premiere and Edius does not have this problem.
However, Symbiosis in the UK (who do HD-Connect box) say that the JVC ProHD cameras do not wrap the shots up properly at the end, they are kind of left open and this creates problems on scene-breaks.
I've tried turning off the "create new clip on timecode break" etc, but it does not make any difference, when I do this it simply quits capturing on a scene break. Besides I have about 300 cutaways like this and I don't want to spend the rest of the year breaking them up on the timeline as this would be a futile and long workflow.
I'm importing and working on a native HDV 720p/25p timeline and this is the way I want to work. I've already imported and edited 4 hours of footage, but these 4 hours were easy as all 4 tapes had no start/stop points, they were recorded continuously from beginning to end of tape for 64 minutes each time so importing was no problem; 1 clip per tape.
But now I've come to my 5 tapes containing hundreds of cutaways I'm kind of screwed and need some advise on how I can import them natively in HDV without losing this 5 seconds off the beginning of each clip whilst FCP searches for the media each time.
I've been told this issue is definately with FCP, any ideas how I can get around this?

I haven't heard of this JVC/FCP problem, so I can't comment on it. However, whoever shot the cutaways didn't do you, the editor, any favors.
I've been doing video since 1984, and I've got to say, anyone who shoots a scene that is only 5 or 6 seconds long on tape is making a huge mistake, and it's been that way since the beginning of computerized editing in the late 70s.
Shoot at least 5 seconds of pre-roll before the shot begins, then roll tape for at least 5 seconds after you've got the shot. That's the protocol I've followed for 22 years now. Tape is cheap, edit suite time isn't.
But laying down only 5 to 6 seconds for a scene is wrong, IMO.

Imovie Mac importing problem or Camcorder problem?

I run a small business for kids parties. I video the kids dancing along to a track they have recorded (played on a cd player). Then i import the video, turn off the camcorder sound and import the finished mixed track of their singing and sync the picture and audio together. This has been working perfectly for over a year. But unfortunately in the last month when i try to sync up the audio track with the video, it starts off synced up perfectly, but gradually as the video goes on the video and audio become out of sync and by the end the video is either too fast or too slow. this is a huge problem! I thought it may the tapes in the video camera so i changed them and it's still doing it. Is this a video camera problem or computer importing problem. Can anyone help as it's ruining the kids DVDs!

I am surprised it has ever worked. That can normally only be done with synched professional equipment. Maybe they changed the CD player at the performance and the old one happened to play at the same rate as your Mac when it imports? (There is a slight difference between the playback speed between different players)
Or perhaps your video camera has become slightly worn, so it pulls the tape slower?
There are endless possibilities for problems with your setup.
I think you should take a look at the "add scaled" tip at the bottom here:
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
(Instead of adding the extracted audio from iMovie, you should add the CD audio.)

Import problem with DMP file

Hi all
I am using oracle 9i and I have problem in import problem.........
when i try to import the DMP file it gives me the error,
IMP-000200: long column Too larege for column buffer size <22>
can any body please tell me how to get out of this error....
actually I have a table in export file that has round about 2 lac rows....
The problem occurs on that table.
Any help will be highly appreciated
Thanks in advance
Regards
Shayan
[email protected]

The correct error code is IMP-00020 not 200
What's your current buffer set to when imp?
IMP-00020: long column too large for column buffer size (number)
Cause: The column buffer is too small. This usually occurs when importing LONG data.
Action: Increase the insert buffer size 10,000 bytes at a time (for example). Use this step-by-step approach because a buffer size that is too large may cause a similar problem.
As adviced, increase 10000 and try again.

Lightroom 5.4 Canon partial import problem (CR2s)

Hello,
I have Lightroom 5.4 on a Windows 8.1 system x64. My camera is a Canon 50D that's several years old.( i.e. not a brand new camera import problem)
When I plug my camera into my computer via the USB cable and try to import images into a Lightroom catalog, Lightroom will recognize and import jpgs, but it does not even see CR2 files. No errors, no thumbnails. It's like they are not there. If I capture a single image as both a jpg and CR2 simultaneously it will only see the jpg and not the CR2.
If I open the Canon EOS Utility it sees any and all images (CR2's included).
I've read a few posts so to help narrow it down:
1) I have write access to the folder (b/c I can import the jpgs.).
2) My Windows system does not recognize the CR2 files in an exporer window if they are still on the camera (to be specific, it sees that there are files, just not the type and no thumbnail. Not even a properties option with right click). I can't pull the files directly off the camera with my computer only with the Canon app. I have the latest camera codec pack put out by Microsoft KB2899190 from 12/9/2013.
3) Once the CR2's are on my computer via the Canon EOS app they are viewable in Expolorer (thumbnails) and can be imported into Lightroom.
4) I have cleared and reformatted the flash card (more than once). Rebooted and powered down the PC and Camera multiple times (removed camera batt. and Unplugged PC).
5) As of time of this post Lightroom is up to date.
I believe there is some communication issue with my camera and this particular PC setup. My wife's computer does not have this issue (she has Vista). When she plugs in the camera the thumbnails pop up in an explorer window for her right away.
Thoughts?
Thank you very much for your help.

Yes, for many people. Recent versions of Lightroom in particular seem to be quite fickle when trying to import directly from camera, and the "fix" in virtually all cases is to use a card reader.

Aperture 3.2.1 Import problems.

Aperture 3.2.1 Import problems. I can not import. Complete system hang when I try. Have to force reboot. I made a new user and everything seems to work fine under that user. I must have something conflicting in my admin user but I have had no luck finding it. I have tried rebuilding the library (all three options) but to no avail. Aperture will run fine as long as I do not try to import. This is very frustrating, any help would be greatly appreciated.
27" imac 3.06 intel core 2 duo 12 GB Ram

Hello Tim,
If a problem only occurs when working from one account, then very often faulty user preferences or presets are the cause. Try to remove your user preference file, and if that should not suffice, move your presets to the desktop, as described in the Aperture 3: Trouble Shooting Basics:
(Caution: I see, you are running Lion: Because of Lion's non-preemptive Process Management you can never be sure if an application really has quit, even if it looks in the Dock as if the Application has finished. So it is very important to log off, before you launch Aperture again, after you changed something in the libraries like described below.)
Delete the user preferences
You can resolve many issues by restoring Aperture back to its original settings. This will not impact your image files or your library. To reset your Aperture user preference settings to their original state, do the following:
Quit Aperture.
In the Finder choose Go to folder from the Go menu.
Type~/Library/Preferences in the "Go to the folder" field. Press the Go button.
Remove the "com.apple.Aperture.plist" file from the Preferences folder. (and log off and log in again!)
Move the user created presets, keyword lists, and so on...
Quit Aperture.
In the Finder choose Go to folder from the Go menu.
Type~/Library/Application Support/Aperture in the "Go to the folder" field. Press the Go button.
Move the contents of this folder to your Desktop (and log off and log in again!)
Start Aperture and see if the issue is resolved. Note: Permanently removing these files will delete presets, metadata sets, keyword sets, and so on. If moving these files to the Desktop does not resolve the issue, move them back to their original location to restore the presets, adjustment chain presets, and metadata sets. In no case will removing these files affect metadata, keywords, or adjustments already applied to images.
If none of this should help, try to boot into safe mode (hold down shift after the start up chime), to see if you have conflicting plugins or video drivers etc. installed in your admin library.
HTH
Léonie

Nikon D3s import problems

Similar Messages

Maybe you are looking for