NIKON D70 RAW files do not work since upgrading to Aperture 1.1.1

Prior to the software update to 1.1.1 everything was working fine with my D70 Raw files. I now get the maroon "Unsupported Image Format" (USF) when I select the images that were previously fine. They show up for a fraction of a second before I get the error. I tried rebuilding the database to no avail. I can export the RAW files and open them in Photoshop so they are OK. Also now when I import from my D70 I get the gray box instead of the image and a letterbox maroon USF message. I have not seen any posts relative to this issue and wonder if there is something else going on.
Dual 1.8Ghz Powermac G5 2GB RAM Radeon X800 XT Mac OS X (10.4.6)

Try this...it seemed to have solved several people's instability issues:
If this doesn't work, post one of your images for people on the forum to check your images.
repairing disk permissions in safe boot mode:
1. To Repair Disk Permissions in Safe Boot restart your computer while holding the Shift key
2. Do not let go of the Shift key until your screen says Safe Boot
3. Once you see the screen with the words Safe Boot let go of the Shift key. If you need to login, login
4. Open Disk Utility located in the Utility folder of your Applications folder, it'll be down at the bottom
5. Select the hard drive that contains your OS & make sure that First Aid is selected (highlighted) in the Disk Utility window
6. Select Repair Disk Permissions
7. When Disk Utility has done its job you'll see the words "Permissions repair complete"
8. While you're at it & since the system is in Safe Boot I'll Verify the other hard drives & Repair them if they need it
Once the utility program has run through the operating system you can quit the application and restart the computer
I routinely use the Repair Disk Permissions feature in the Disk Utility application on Mondays (Maintenance Monday) so I park an icon of it in the Dock. It is a good idea to Repair Disk Permissions more frequently if you are power editing for many hours at a time or the application you are working on begins to misbehave.
Regardless of what application you are using (unless there is a known bug in the application) Repairing Disk Permissions will take care of many problems.
It is recommended to Repair Disk Permissions before & after installing software or software updates

Similar Messages

My Nikon 7100 RAW files will not load into Iphoto.

My Nikon 7100 RAW files will not load into IPhoto. The computer will recognize the files once the download is complete, but fails to finalize. My version of IPhoto is 7.1.5 and my computer is a Mid 2007 Mac Mini Model. I have Light Room 5, but my wife and I are prefer IPhoto for basic download and sharing. Is there a possibility of getting the RAW files to download ?

what version of the OS?
You need Mt Lion and iPhoto '09 for your camera RAW support - OS X Mountain Lion: Supported digital camera RAW formats -
If your computer will support tMavericks do the free upgrade to it and purchase the upgrade to iPhoto '11 version 9.5.x in the App store
LN

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Home sharing on apple tv not working since upgrade to yosimite

home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
everything worked fine before this!

Hey stephenfromdominion,
Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks,
Matt M.

Nikon D70 RAW files now get "Unsupported Image Format"

Prior to March 12th, everything was working fine with my D70 Raw files. I now get the maroon "Unsupported Image Format" (USF) when I select the images that were previously fine. They show up for a fraction of a second before I get the error. I tried rebuilding the database to no avail. I can export the RAW files and open them in Photoshop so they are OK. Also now when I import from my D70 I get the gray box instead of the image and a letterbox maroon USF message, the EXIF data still imports and is associated with the image. Help. I did upgrade to 1.1.1
Dual 1.8Ghz Powermac G5 2GB RAM Radeon X800 XT Mac OS X (10.4.6)

Well, I can't really put my finger on it. I know for sure it happened post 1.1 upgrade, but it happened with 1.0 as well (I didn't do any troubleshooting when it first happened, just re-imported and it was fine.) The last time it happened it was the last 20 images on the original CF card, mostly in succession, but there were a few images that were still able to be read okay inside of that 20 image string. I reimported from the original card (thank God I had not erased yet!) and it was fine.
At least I know to keep my originals outside of aperture, what a space wasting bummer! I don't think I have any bad RAM because I've been running for 2 years without any real problems... The minor problems have happened, I believe with very tough weather conditions (humidity) and I experienced problems on all my Macs and even at work on windows. Maybe it was sun flares or static electricity, I don't know. The other issue is that my a/c power dips to low voltage often and my UPS switched to battery. I have a better UPS which always outputs 120v even when things sag or jump.
The only other thing I can possibly think of is that I have my Aperture library on a new Seagate 300GB drive that has only been used for images and sits dormant in my system except for scratch disk and Aperture. Actually, I did use it for about a month or two mirroring my boot drive with no errors, so I think the drive is good. Grr!
Troubleshooting rare occurances without have access to trace level data *****! (At work we can take a trace dump from our equipment and the guys can see pretty quickly what happened, and if it is hardware or software issue.)
To clarify, which Dual 1.8 do you have? The June 2004 one with only 4 RAM slots, or the 2003 one that was added to the original lineup with 8 RAM slots?
Aaron

Nikon D7000 raw files will not open using PSE 11

I am unable to open Nikon D7000 raw files(NEF) using PSE 11
When I use the program's "Update "function I just get an error message.
Can anyone advise?
Thanks

This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the proper forum so that it can get proper attention.
We also have many other forums relating to other Adobe products at: http://forums.adobe.com.

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

My morphie pack does not work since upgrading

My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

Signature field NOT working since upgrade to Adobe Pro X

Hi Forum,
Form stop working since upgraded to Pro X (ver 10) in Adobe. Getting this message:
IntegriSign
This plug-in is intended for validating signatuers signed using earlier versions of Acrobat. To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
I have changed settings in Adobe Pro X to the above but still get the same message.
Do anyone know how to fix this?
Thanks,
Patricia

Download directly from Apple and install over what you have now;
iTunes 12.0.1

Errors converting Nikon D70s RAW files since yesterday

Yesterday i've installed "Digital Camera RAW Compatibility Update 2.2" which seems to be the cause for some really nasty problems with Nikon D70's RAW files.
Now (some of the) files will simply display a dark red image just displaying "Nicht unterstütztes Dateiformat" (means "unsupported file format").
Will there be a fix like "Digital Camera RAW Compatibility Update 2.3" quite soon?
Is there any chance to go back to 2.1 ?
Please, provide me some hint on what to do next.

I have this problem myself, and others have reported it too, and that was before the this new "Digital Camera RAW Compatibility Update 2.2" was released.
It looks like a bug in Aperture.
Just search for "Unsupported File Format Error" to see more reports.
Try sending them feedback with the pulldowm menu item.

IPhoto won't import Nikon D70 raw files after upgrade to Leopard

I recently upgraded to Leopard, and yesterday, I hooked my Nikon D70 up to the computer. iPhoto auto starts, and tells me that there are pictures to import. When I click the import button, iPhoto tells me that it is importing the photos, (which are in Nikon raw format) but in fact, it is not. The photos don't "flash" across the screen as they are being imported as they used to. When iPhoto thinks it is done, there are no new photos on my hard drive. A spotlight search confirms that fact.
Jpeg photos still import just like they used to. Only raw photos don't import.
If I manually open iPhoto, and click on file then import, I can find my cameras CF card, and highlight the photos I want to import, and iPhoto will then import raw photos. It won't import them with the simple attach the camera, one click import that I have grown used to. My D70 is a supported camera for iPhoto, and it used to work in OSX 10.4. Is there a setting I'm missing somewhere?
Thanks in advance for any help offered.

I had the same prob with my mac and my D70.
I did an upgrade to leopard from tiger. After that, iPhoto would not import photos. The camera and pics would show up in the app, and would let me try an import, but it would come up with an error saying "20 photos were in an incompatible format and could not be imported".
Since upgrading to Leopard, image capture wouldn't work either. App would run and then wouldn't. Would crash and error. Wouldn't import photos at all either.
I was able to manually drag photos from my camera to the desktop and then import into iPhoto.
iPhoto wasn't the only thing playing up on my mac (networking, file permissions, backlit keyboard, software update, ffmpeg app were all problematic), so I backed up everything I wanted to keep to an external drive and did an erase and install of Leopard. This has fixed practically every problem I had. Do the same if you can, cos it has made my mac a pleasure to use again.

Nikon D5200 raw files will not open in PSE 11

I recently purchased a Nikon D5200 and I could not open the raw files in Elements 9. I downloaded all updates for Camera Raw and it still did not work. I found a question/answer with the same problem and it recommended updating the DNG Converter or purchasing Elements 11. I did both and I still get a message that my camera model is not supported by the Camera Raw version I have. I verified per the website it is supported. Why can't I open my files?

Nikon Transfer V1.x corrupts newer Nikon camera images as far as reading with Adobe software. ViewNX2 should be ok, as long as it’s the newest version.
Can you upload one of your non-working images to www.dropbox.com and post a public download link for it, so others can try, and see if it works on their systems or not? This would help narrow down if it is something wrong with the Adobe software install on your computer or something wrong with the image data in the NEF, itself.

Nikon D70s Raw files extremely noisy

I have a bunch of NEF files from my Nikon D70s that look terrible when imported with Lightroom (or Photoshop on the Mac or iPhoto or Photoshop on the PC, for that matter). Here is a screen capture of one of the photos at 1:1 zoom:
http://solace.stanford.edu/~beers/Photo/lightroom.png
And another, from iPhoto:
http://solace.stanford.edu/~beers/Photo/iphoto.png
Note the "maze-like" pattern that is embedded into the image, making it useless except when downsampled and blurred.
Here is the same image read into Picasa (which also apparently reads camera raw files) on the PC:
http://solace.stanford.edu/~beers/Photo/picasa.png
The pattern is gone and the image is usable.
This is happening on my Mac running Leopard in Photoshop CS3, Lightroom (both using ACR 4.3.1), iPhoto, and Photoshop CS3 on the PC. Anyone have any idea what is going on?
Andrew

> I believe only pictures from that particular setting (grey background, grey rug, softbox lights, etc.) exhibited the noise in question
Hold on. Did you use some filter as well? Was there some strong light from the side?
> you suggest that there are multiple raw images which are combined?
No. I am not sure what you mean, perhaps the two different greens?
The pixels sites have filters over them: green, red or blue. They are arranged in a regular pattern; in case of the D70 this pattern consists of two rows of two pixels each. The first row contains a blue and a green pixel, the second row starts with a green and then a red.
If you download this image and view it in at least 600%, then you see this arrangement. (This image is very greenish, mainly because half of the pixels is green, while only 1/4 of them is red and another quarter is blue. This is a non-demosaiced image.)
http://www.panopeeper.com/Demo/Andrew_DSC_0014_crop.tif
The values of green pixels, which are "diagonally neighbours" should be close to each other on the relative uniform areas, like the face, but they are not. You can verify that on this image as well if you increase the magnification even more, so that you can navigate over the pixels; however, the numerical differences you see here are much reduced from the original differences.
Anyway, I was referring to the green pixels in the alternating rows, once beside reds, once beside blues; they responded very differently.

Nikon d5200 raw files will not open in PSE 10

I am currently using PSE 10 and have just upgraded my camera to a Nikon d5200 from a d5100. I cannot open the raw files for the d5200. Do I need a more up to date PSE or can you suggest which plug in update I require.
Thank you

Sorry if it's in the wrong place but I have not used this bofore and thought it was going to costomer service person. If yo tell me how to delete it I will.
Thanks

NIKON D70 RAW files do not work since upgrading to Aperture 1.1.1

Similar Messages

Maybe you are looking for