Nikon D7000 raw file plugin for Photoshop Elements 9

I have Photoshop 9 on Windows 8 platform and want to install plugin to be able to process raw files of Nikon D7000.

Use the menu in Full Edit:
Help >> Updates
Then install the camera raw 6.5 plug-in, if available.

Similar Messages

Opening Nikon D7000 raw files in Elements 8

I am unable to open Nikon D7000 NEF files in Elements 8. I have been unsuccessfull in downloading the version 5.7 update from the web site. After downloading several times the files are still not recognized in Elements 8.

I am using Windows 7. I tried selecting the folder that contained the folder holding the pictures to be converted. I then single-clicked the folder holding the pictures and hit select. A message came up stating that the source folder did not contain any supported camera raw files.I have spoken with my Elements software supplier and this is his response:
"I've done some digging and it turns out the Nikon D7000 wasn't supported in elements until the release of version 6.4 Adobe Camera Reader.So to make sure you have the latest ACR update installed. You can check which one you have by going into elements and clicking Help>About Plug-In>Camera Raw. And if it's not 6.7 then Help>Updates will find it and let you install the latest version. You could also try saving your camera files as .RAW instead of .NEF, and then opening them in elements. Adobe lightroom 4 should already have these plugins available right outside the box, but if you can save the money and run updates instead that would work just fine." I have checked for Elements updates for the Camera Raw plug-in and the message appears stating no updates are available. The camer raw plug-in version is currently 6.1.0.250.
Date: Fri, 28 Sep 2012 07:35:41 -0600
From: [email protected]
To: [email protected]
Subject: Opening Nikon D7000 raw files in Elements 8
    Re: Opening Nikon D7000 raw files in Elements 8
    created by R_Kelly in Photoshop Elements - View the full discussion
What operating system are you using?
The most common cause is pointing the dng converter to the actual files and not just to the folder that the camera raw files are in.
There is an example of how on a windows system in this thread:
http://forums.adobe.com/message/4633126#4633126
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4734703#4734703
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4734703#4734703
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4734703#4734703. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Just bought Nikon D600, can't open the raw file from my Photoshop element 9, please adivise. Thanks

Can't open the raw file in my Photoshop Element 9 from my new Nikon D600, please help. many thanks
Brian

Hi,
The D600 requires camera raw version 7.3 or later - that is not compatible with Photoshop Elements 9.
You need to either
1) upgrade to Photoshop Elements 11 or 12
or
2) you can download the free Adobe DNG converter to convert you NEF files to DNG files and then PSE 9 can read the DNG files
The latest version of the DNG converter that you can use will depend on your operating system.
For XP or Vista :
DNG Converter 8.3
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
For Windows 7 or 8
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5
For Mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.5
Brian

HT3825 I can't open Nikon D7000 raw files in Photoshop CS5. Any ideas how to do it

I can't open Nikon D7000 raw files in Photoshop CS5. Any ideas how to do it

This page might help.
Note that your question does not relate to Apple software nor hardware.

Opening nikon d7000 raw files in pse8

I have downloades camera raw 6 plug in but I am still getting the wrong file type error when I try to open my nikon d7000 raw files in elements 8.
any suggestions??

You need to update to PSE9 as your camera model is not supported in earlier versions
N.B. If you are not wishing to upgrade to PSE9 - you can use the freely available DNG converter 6.3 and then use Elements to open and edit the DNG files. It’s recommended you keep your original raw files as back-up as they can always be read by your camera software.
DNG Converter 6.3for Windows.
DNG Converter 6.3 for MAC.

Icone plugin for Photoshop Elements?

Is there a Icone plugin for Photoshop Elements?

I installed the free 32-bit Windows version (as PSE for Windows is 32-bit) plug-in from http://www.telegraphics.com.au/sw/product/ICOFormat by copying ICOFormat.8bi to C:\Program Files (x86)\Adobe\Photoshop Elements 12\Required\Plug-Ins\File Formats and it opens .ico and .cur files fine. The same link also has 64-bit Windows and Mac versions of the plug-in.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Aperture 2 and Nikon D7000 RAW files. Do I need to upgrade to Aperture 3?

I currently have a Nikon D70 with a Nikon D7000 on its way. I want to know if Aperture 2 will process Nikon D7000 RAW files. I searched Apple support and these discussions. I only could find confirmation that Aperture 3 now handles it. But I have not found anything that confirms that Aperture 2 indeed did NOT get an update to handle the D7000 RAW files.
Can someone confirm this?
Thanks.

For future reference, all the cameras listed on the Aperture RAW Support web page that have the double asterisk "**" require Aperture 3.

Nikon D7000 raw files will not open using PSE 11

I am unable to open Nikon D7000 raw files(NEF) using PSE 11
When I use the program's "Update "function I just get an error message.
Can anyone advise?
Thanks

This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the proper forum so that it can get proper attention.
We also have many other forums relating to other Adobe products at: http://forums.adobe.com.

Processing RAW files in Adobe Photoshop Elements 11

Hello.. Am I able to process RAW files in Adobe Photoshop Elements 11, or do I have to purchase Lightroom 5 in order to access ACR?
I have a Panasonic Lumix G5 camera.
Thank You,
Bob Rubenstein

Yes, but first update the camera raw plug-in from the menu in Full Edit (Expert Mode)
Help >> Updates
Install camera raw 7.4

Adobe Camera Raw Plugin for Photoshop Elements 4

I have downloaded the latest Raw Plugin for Elements 4 successfully and have gone through all the steps except i havent installed Raw Plugin as yet, i would like to know if i have to unzip the files in the downloaded Plugin before i install into Elements 4 or install as is and unzip when it's installed into Elements 4 ? Many thanks Lloyd fro OZ

In order to use the new plugin in Photoshop Elements 4, you will need to run the 4.0.1 Updater. Support for this version of ACR is the ONLY feature of the 4.0.1 updater.
Unfortunately, the new ACR plugin came out before we could get the PSE 4.0.1 updater out, so we need to do a workaround for the time being.
Until the Updater gets posted (which we expect to be on or before May 20), you can use the converter to convert your Panasonic Lumix DMC-FZ8 files to RAW, then use them in the program.
The Converter can be found at: http://www.adobe.com/support/downloads/detail.jsp?ftpID=3604
Sorry for the delay between the ACR posting and the PSE Mac updater posting.
-Mark

How to install Plugins for Photoshop Elements 11

I want to install a Photoshop Plug In
Were I get them?
How to install them?
My OS: Win 7
I´ve PSE11
Greets from Germany

you need to place your plugins in the folder C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins
You can make folders inside the Plug-Ins folder to maintain the hierarchy of plug-ins
check the help document on plugins here; http://helpx.adobe.com/photoshop-elements/using/scratch-disks-plug-ins.html#about_plug_in_ modules

RAW Plugin for Photoshop Elements 4.0

Where to get the RAW-Converter for Leica Digilux 3?

I have never used Photoshop Elements. But from what I can tell, Camera Raw 3.7 was the last version that was compatible with Elements 4. It did support the camera you mentioned. The windows version can be downloaded from:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3584

Raw plugin for photoshop elements 10

I am after a raw plug in for elements 10 that is suitable for my camera Canon eos700d, I have tried 8.1 but it says my product not supported, any help would be appreciated
Thanks
John

See;
http://forums.adobe.com/thread/1030798?tstart=0
The ACR version required for your Canon eos 700D is version 7.4.
Either you upgrade to PSE11, and from the PSE11 help menu you upgrade to 7.4, or you have to download the free Adobe DNGconverter which can batch convert your raw files to the DNG format which your PSE10 ACR version can read.

Nikon D7000 Raw Files

Does the new Elements 9 open the D7000 Raw (NEF) files?

Yes the Nikon D7000 has been added in the list of supported cameras for Camera Raw plug-in v6.3. Here is the list of new cameras which have been added in v6.3
Newly Supported cameras for Camera Raw 6 and Lightroom 3
Support for the following cameras has been added from Camera Raw 6.2 to 6.3 and Lightroom 3.2 to 3.3.
Canon PowerShot G12
Canon PowerShot S95
Nikon D7000
Nikon Coolpix P7000
Nikon D3100
Olympus E-5
Panasonic DMC-GF2
Panasonic DMC-GH2
Pentax K-5
Pentax K-r
Ricoh GXR, GR LENS A12 28mm F2.5
Samsung NX100
Samsung TL350 (WB2000)
Sony A560
Sony A580
Once you install PSE 9 go to Help->Updates and install the latest Camera Raw v6.3 as an update and you should be able to use the .NEF files from D7000
. You can also give the trial version of PSE 9 a shot for the same, link to download the trial version : http://www.adobe.com/products/photoshopel/

Working with Raw Files in Adobe Photoshop Elements 11

I shoot in Raw format with a Canon EOS 60D, when I import raw files into Elements it first loads Adobe Camera Raw. After working on an image & then opening the file in Elements 11 ( Expert tab ) it offers a variety of options to enhance the image. It seems to be doubling up OR ... my question is , can I import the file directly into Elements 11 & work on it without using Adobe Camera Raw ?
Thank You
Phil
Classic Directories

Thank you for your reply, I use Adobe Camera Raw to edit most of my photos & then convert to tif. I bought a book called " The Photoshop Elements Book " with tutorials for Elements 11 wich seems to confuse. I have sucessfully imported raw files directly into Elements 11 & worked on them. By doubling up, I meant how much work should I do in Adobe Camera Raw, as it seems everything you need to edit/enhance/convert is in Elements 11.

Nikon D7000 raw file plugin for Photoshop Elements 9

Similar Messages

Maybe you are looking for