Nikon D7000 raw files will not open using PSE 11

I am unable to open Nikon D7000 raw files(NEF) using PSE 11
When I use the program's "Update "function I just get an error message.
Can anyone advise?
Thanks

This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the proper forum so that it can get proper attention.
We also have many other forums relating to other Adobe products at: http://forums.adobe.com.

Similar Messages

Nikon D5200 raw files will not open in PSE 11

I recently purchased a Nikon D5200 and I could not open the raw files in Elements 9. I downloaded all updates for Camera Raw and it still did not work. I found a question/answer with the same problem and it recommended updating the DNG Converter or purchasing Elements 11. I did both and I still get a message that my camera model is not supported by the Camera Raw version I have. I verified per the website it is supported. Why can't I open my files?

Nikon Transfer V1.x corrupts newer Nikon camera images as far as reading with Adobe software. ViewNX2 should be ok, as long as it’s the newest version.
Can you upload one of your non-working images to www.dropbox.com and post a public download link for it, so others can try, and see if it works on their systems or not? This would help narrow down if it is something wrong with the Adobe software install on your computer or something wrong with the image data in the NEF, itself.

Nikon d5200 raw files will not open in PSE 10

I am currently using PSE 10 and have just upgraded my camera to a Nikon d5200 from a d5100. I cannot open the raw files for the d5200. Do I need a more up to date PSE or can you suggest which plug in update I require.
Thank you

Sorry if it's in the wrong place but I have not used this bofore and thought it was going to costomer service person. If yo tell me how to delete it I will.
Thanks

Nikon D5300 raw files will not open in Elements 12

What do I have to do to open raw files from my Nikon D5300 in the new Elements 12

Go to Expert Mode and fron the top menu click:
Help >> Updates
Install Adobe Camera Raw plugin v 8.4

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

You're welcome! It's usually CS5 and below that has the ACR update problems.
What counts is that you are back in business.
Gene

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/

My Nikon 7100 RAW files will not load into Iphoto.

My Nikon 7100 RAW files will not load into IPhoto. The computer will recognize the files once the download is complete, but fails to finalize. My version of IPhoto is 7.1.5 and my computer is a Mid 2007 Mac Mini Model. I have Light Room 5, but my wife and I are prefer IPhoto for basic download and sharing. Is there a possibility of getting the RAW files to download ?

what version of the OS?
You need Mt Lion and iPhoto '09 for your camera RAW support - OS X Mountain Lion: Supported digital camera RAW formats -
If your computer will support tMavericks do the free upgrade to it and purchase the upgrade to iPhoto '11 version 9.5.x in the App store
LN

Nikon D7000 .NEF files are not opening

I am a new, lucky owner of the Nikon D7000 but, sadly, am unable to open my RAW (.NEF) files in iPhoto -- I am told that the files are an "Unreadable" format.
Now, while I may use the Nikon software provided, I would much rather use iPhoto for my editing.
Is there anything I might be able to do -- drivers, codecs (?) -- to get this opening?

I'm in the same boat here. What I've done so far is to use Adobe DNG Converter (free) to convert the NEF to DNG. Then drag the folder with the DNG files into iPhoto.
With another batch of files I converted to DNG, then did the sorting and editing in Adobe Bridge and Camera Raw. Then converted the whole bunch to jpg and imported them into iPhoto. I also imported only the highest rated DNG images. (Note that any Camera Raw processing will not be used by iPhoto, but it remains in the DNG file)

Some Canon CR2 RAW Files Will Not Open In Elements 8

I use a Canon 7D DSLR. Up until 30 minutes ago I never had a problem opening Canon CR2 RAW files in Photoshop Elements 8.
Some files still open others do not. I can think of only one thing. I was shooting a large number of frames and reduced the RAW Image size down from RAW Large Only to RAW Medium with Small Jpeg to give me more room on the Compact Flash Card.
The Large RAW only CR2 files open fine in PSE 8, the Jpegs open fine, but the smaller sized CR2 files will not open and I get a wrong file type message in PSE8.
Any ideas why this would happen? I suspect it is a function of the camera setting, but all RAW files download as CR2 files.
I appreciate any guidance in this matter. Needless to say I am resetting my camera back to Large RAW files only.
Alex

ACR 5.x only supported full-sized 7D RAWs, but ACR 6.x supports 7D mRAW and sRAW, so just update to the latest version of the plugin, following the PSE-specific instructions:
http://www.adobe.com/downloads/updates/
sRAW and mRAW files are not RAWs because the camera has already demosaicked them to RGB and encoded them as lossless JPG.
Here is technical information on the reduce-sized RAWs:
http://lclevy.free.fr/cr2/#sraw

D800 RAW files will not open in Photoshop CS6

I have just installed the CS6 upgrade to Photoshop CS4 Extended, but now the software will not read the RAW files from my D800.
I have followed Adobe's instructions to check that I have the correct RAW plug-in (7.0.0.308) which I have. I have uninstalled the software and reinstalled the software without success. I do not want to convert my RAW files into DNG files, so I have ignored that step.
The 'Open in Photoshop' instruction in Lightroom 4 does not open my D800 RAW files either, although the files can be opened in Lightroom 4 OK.
Any idea what the problem is?

Brilliant! ACR 7.1 Beta allows D800 RAW files to be opened within CS6 and it also allows Photoshop 4 to open D800 RAW files in Photoshop CS6.
It says that the Beta version will expire on 30/6/2012 after which it will keep advising on a daily basis although it will still work. Any idea, what happens next? Does Adobe issue a proper ACR 7.1 and distribute it as part of the update service?

Sony raw files will not open in PE5. Help!

I have a Sony alpha 350 DSLR. When I shoot raw files (.ARW), Photoshop Elelements will not open them. I get a message that says it's the wrong kind of file. The Adobe plug-in that came with the camera's software does not work. I downloaded the most recent Camera Raw plug-in for PE5 from Adobe (4.5), and it does not work. Adobe customer support told me they no longer service PE5, and sent me to this forum.
How can I get PE5 to open Sony raw files?

Thanks for the quick response. In Photoshop Elements 5.0, when I click on
the raw file stored on my hard drive, a small message box comes up with a
white X in a red circle and the message "Cannot open
because it is the wrong type of file."
I am not sure if I installed the plug-in correctly. There were no
directions except how to unzip it and save it to my hard drive. The icon
shows a blue electrical plug and reads " Camera Raw .8bi, 8BI File, 10,634
KB" When I click on it, it opens Photoshop Elements, but it still gives me
the error message when I try to open a raw file.

RAW files will not open in Elements 8

I downloaded and installed several actions for elements8 this afternoon. I also downloaded a couple intended for photoshop that were self installing. I clicked on landscap_and_sky_action_by_fcpr,rar. I thought It would open and I could install the action like the others. Apparently, it self-installed as if\t was supposed to( just in the woring program.) Some little time after that I tried to home a new RAW file downloaded from my camera. I got the error message, cannot open (file name and full path) because it is the wrong type of file.
I have tried to open the raw files with file open and file open as specifiying that the file is a raw file.
I also tried to open an older RAW file with the same results (previously open before today.)
This is the first time I have had this problem. I have been using RAW files for the last year and half without any problems.
My best guess is that rar file corrupted a file somewhere, but I have no clue where.
lastly, I uninstalled elements 8 and reinstalled it. Same problem. I did note that when uninstalling elements, it does not erase the directories and many of the files. I have hestiated doing that as I have a massive set of photos in the Organizer, have updated the RAW Camera database (worked fine after that) and added several features (effects) to elements.
Any suggestions on a fix.
Ed

I removed the pior ACR and renamed it in case I needed it before installing the new one. The new one has been working for a year+ without any problems. This is a brand new problem.
I think I have found the problem. I installed Optikverve's Vitural Photographer yesterday. I thought it was a stand alone like the studio. I found that it installed inside Elements. That was just prior to Elements starting to refuse to open RAW files. Everything else (that I have checked ) seems to work fine. That says to me that program is the problem.
I have just finished a negative virus scan on the computer and I am getting ready to back up Organizer to an external hard drive. I am going then to remove Elements and wipe out out the files and directory structure that remains. I will then install Elements. That should put it back at "as new" state. I will have reinstall the new ACR files and the other addons. At least, it should work again. (I hope.)
Ed

I have Photoshop Elements 12 and the new Canon 7D mark II. My RAW files will not open.

I have already downloaded the plugin 8.7. I ran the exe file, an it still doesn't work. Am I am going to have to buy Photoshop elements 13 to get my RAW files to open? If that's the answer, I'll do that, but I just want to know for sure before I buy it.
Thanks

Hi,
Camera raw 8.7.1 is not supported by Photoshop Elements 12.
You need to upgrade to Photoshop Elements 13 or you could use the Adobe DNG converter.
The DNG converter is a standalone application which can take the CR2 files and convert them toDNG files. The DNG files can then be processed by Photoshop Elements 12. This does add an extra step to your workflow though.
See
DNG Converter 8.7
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5858
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5864
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

Canon 70D Raw files will not open in Elements 11

My canon 40d camera works with Element 11 in raw.....upgraded to a 70d only to find that it wont open with raw...any chance there will be an update soon for this popular canon 70d.

The EOS 70D was first supported in Camera Raw 8.2 (the Adobe plug-in used by Elements to process Raw files) which is only compatible with Elements 12 and later.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Options:
Upgrade to Elements 12, or
Download the free Adobe DNG converter, convert all the Raw files from the 70D to DNGs then edit the DNGs in Elements 11
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Nikon D7000 raw files will not open using PSE 11

Similar Messages

Maybe you are looking for