Nikon D7100 Import using both card slots Raw + JPEG

I have a Nikon D7100 with the card slots allocated for Raw (Slot 1) and JPEG (slot 2). When Importing I would like to convert the raw images in slot 1 to the Adobe DNG format and to have the JPEG images simply imported as JPEGs. I cannot find the correct combinations of preferences/options to make this happen. What happens today is the both images import with the second labeled as a -2 copy of the first image. Suggestions are appreciated.
Thanks Ron K.

I found the magic combination of settings. Not only must the camera settings be set to raw (card 1) + Jpeg (card 2) but the quality needs to be set to raw + jpeg (fine, normal, or low).
This places the jpeg image on card #2 and is imported as a proper jpeg.
Hope this helps others.
Ron K

Similar Messages

Z68A-GD80 use both PCIEX1 slots same time?

Hi- can't find answer to this using the search, so:
On a Z68A-GD80 motherboard, I am trying to use a PCI SATA3 card in PCIEX1_1 and PCIEX1_2 at the same time to add 4 extra SATA3 ports, but if both cards are in, only the top one is recognized. If the second one is in alone, both drives attached to that are recognized, but I cannot use all 4 extra ports at teh same time. Is there any way round this, or is this some limitation of PCI implementation?
Thanks.

Ok. Need a little clarification here. To end any confusion about SATA 6Gb/s, SATA III, SATA 6.0 being confused with SATA3 which is the mainboards #3 Intel SATA II controlled port.
Is this mainboard the Z68 'B3' or 'G3'?
Excerpt from the 'B3' manual;
Slots
3 PCIE x16 slots
PCI_E2 supports up to PCIE x16 speed (when PCI_E4 is empty),
or PCI_E2 supports up to PCIE x8 speed (when PCI_E4 is installed)
PCI_E4 supports up to PCIE x8 speed
PCI_E5 supports up to PCIE x4 speed ***
(***due to the PCIE lanes limitation of chipset, when the PCI_E5 has been
installed with a PCIE x16/ x8/ x4 device, 1 eSATA port, 1 SATA port (SATA7), 1
onboard front USB 3.0 connector (JUSB4), 1 1394 port (back panel), 1 onboard
1394 connector (J1394_1) and 2 PCI slots will become unavailable.)
2 PCIE x1 slots
When both of the PCIE x1 (PCI_E1, PCI_E3) slots have been installed, only the
PCI_E1 slot is available, using one PCIE x1 slot is recommended.
Quote
I am trying to use a PCI SATA III card in PCIEX1_1 and PCIEX1_2 at the same time to add 4 extra SATA III ports, but if both cards are in, only the top one is recognized.
A PCI card can't be used in a PCI-E slot.

High Capacity storage using Express Card slot

Hi guys,
I know this probably isn't the right forum but I couldn't find a more appropriate one.
I've got a MacBook Pro 2.16ghz Intel Core Duo and I need serious storage options!
I'm basically looking for high capacity RAID 5 storage to store/edit/capture onto. I edit mostly on SD but sometimes HDV (I own an HVR-Z1E). I've got a first edition MacBook Pro and so only have one firewire port which will be taken up when capturing by the camera.
I'm probably going to have to use the express card slot but haven't really thought about what card/wires yet. I'm wanting to spend under £1000 in total and would ideally like Raid 5 configuration to build some safety into my system (lost a project through a broken drive the other day). I'm hoping for a 2tb system or there abouts but am happy to go for less and keep plugging in more HDD later.
I was considering this la cie: http://www.lacie.com/uk/products/product.htm?pid=10850 but I'm very open to suggestion and at the moment am most concerned about data rate especially on capture. On RAID 5 is that a problem with this drive if I connected with USB2.0?
Sorry for the odd placement (I'd be happy to re-post in a more appropriate forum if that's useful).
All the best,
Dan

I've been thinking on simlar lines.
found this,
http://www.span.com/catalog/productinfo.php?productsid=15993
or
http://www.macupgrades.co.uk/store/productinfo.php?productsid=373
And maybe one of these.
http://www.span.com/catalog/index.php?cPath=1913021329
or
http://www.macupgrades.co.uk/store/productinfo.php?productsid=260
with some of these
http://www.span.com/catalog/productinfo.php?cPath=23_502_568&productsid=7732
Alternatively you set up a gigabit network and use some NAS drives.... choices choices.
This stuff seems to have good reviews.
http://www.sansdigital.com/synology.html
Happy shopping....
MPB 2.33 15" 3GB Mac OS X (10.4.9) parallels and bootcamp are the furure...

Unable to use sim card slot in laptop

Hi,
I`m using a dm4 - 1009tu laptop with windows 7 ultimate (x64). There`s a sim card slot in my laptop behind my battery. How can i use it ? Is it supported in India ?

Hi,
Due you have WWAN card in your laptop ? You need that otherwise you can not use your SIM card
Regards,
BH
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

TS2518 I have Aperture 3.1.2 running on os 10.6.8. Aperture does not show focus points on my Nikon D7100, nor does it recognize the RAW files. Will upgrading Aperture allow me to see the focus points and RAW files again? Also, do I need to upgrade my os f

I have aperture 3.1.2 running on os 10.6.8 mac book pro. Lost some features in aperature when I upgraded my camera (no longer shows focus points, does not recognize RAW files) Would like to upgrade to aperture 3.5, but do not want to loose any pictures in my extensive library. Do I have to upgrade one vesion at a time, or can I jump? I believe I also need to upgrade my os, but not sure which to do first? Any help would be appreciated...

1. Can I get Icloud without having to upgrade to OS Lion?
Nope, you need 10.7.
2. If I upgrade to OS Lion, does this automatically put me onto ICloud
No, you set that up yourself.
3. I have three mobile me email addresses. One for myself, one for my wife and one I use for my business. What happens to these.
You can convert them to be used in iCloud.
4. My wife and I also use mobile me to sync our calendars across an Ipad (original) and two Iphones (3Gs). Both Iphones and Ipad are still currently using IOS4, and I am reluctant to upgrade this to IOS 5 as I have heard some horror stories. If I fail to upgrade to IOS 5, will this create confusion with my Apple ID's. (There already is a lot of confusion with these- Apple appear to not have down their homework)
If you don't change the settings you have now, I'm sure it will stay working. I believe Apple is phasing out MobileMe and you'd be forced to upgrade eventually.
5. Will Icloud allow me to transfer my Icalendar across seamlessly? This is Ical 4.04 whic came with my Imac. Does this get upgraded if I update to Lion?
Yes, it will get upgraded. I have my calendar on Lion and my iPhone 5.0.1 working seamlessly at the moment. That doesn't mean you won't have problems because with new technology that can be expected. Make sure you do a back up if you're worried about losing data.

How to use SIM card slot on W500

I found there is a slot for SIM card when I pull the battery out. I insert my SIM card and start the computer, however it won't recognize. I download and install Mobile Connect software, I got "no device found" message. How to use this function?

Hello LeadOrg:
Thanks for that reply.
What confuses me is this: There seems to be two or maybe three different cards available, as follows:
Vodafone and AT&T - HSDPA wireless WAN, which seems to address the following two items:
- Ericsson HSDPA Wireless WAN Adapter
- Qualcomm UNDP Wireless WAN Adapter
Verizon Wireless WAN (UNDP), which seems to address the following one item:
- Qualcomm HS-USB
I can't find any specifications in the Lenovo literature that clarifies which of the above items are suitable for GSM-900 and GSM-1800 (the frequencies used in Europe) and which of these items are suitable for GSM-850 and GSM-1900 (the frequencies used i Oz, USA, and Canada).
Further, Lenovo seems to be linking these two products to specific carriers (Vodafone and AT&T in one case, Verizon in the other case), and I use neither one of these companies - they don't operate in Canada. I use Rogers GSM when I am in Canada and Swisscom GSM when I am in Europe.
I am quite confused. I'd like to get a card that works with the two above carriers - but I don't know how to go about the process of selecting the appropriate card. The whole HSDPA, HS-USB and UNDP business totally confuses me. I always thought that UNDP was the United Nations Development Program...
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

MY old camera was a 60D with 7.1 raw format and the new one is 6D. How do I get a plug in that will allow me to use both cameras in raw, and still access my old raw 7.1 files ? I am using Elements 11,

using Elements 11, can I get a plug in that supports both cameras, and still access my old raw 7.1 files

A new plug-in will support all the older cameras, so a plug-in that supports the newer 6D will also support the older 60D.
The 60D needs at least ACR 6.2.
The 6D needs at least ACR 7.3.
PSE11 ships with ACR 7.1 but can be updated all the way up to ACR 8.0.
What happens when you do a Help / Updates in the PSE Editor application?

T43 and firewire drives using PC card slot

I use a firewire card (PC card) on my laptop due to laptop has no
installed factory firewire. Problem is when I put computer to sleep or
close the lid of the laptop or boot or shut down windows the computer
will freeze and force me to push off button and have to reboot why is
that? The firewire is IEEE 1394.
Or if not willing to work what about this?
How can I share my 2 firewire device
1) external drive
2) CD/DVD burner
from my Mac to a XP computer?

Hi, Sherry. Welcome to Apple Discussions.
You've posted in the iBook G3 (Dual USB) Discussions area. You may want to try again in the proper _PowerBook Forum_.
I don't think any such thing exists, but someone there may know of something that would work for you.
Good luck.

Can I pay using both card payment and a voucher?

I was given a £15 voucher, and as most albums are for sale at £7.99, I am short of buying a second album by just £1.
Is there any way that I could use card payment to make up the remaining £1, to add to my £7 voucher credit?
Thanks

Unfortunately, you cannot use your credit from iTunes gift cards to renew your iCloud storage plan.

I always imported my SD cards into iPhoto. Now it doesn't work with the cards from my new Nikon D7100 camera. What to do?

I have an iMac OS x 10.6.8 and always used iPhoto with good success, importing images including RAW format from my Nikon D40 into iPhoto. Since I bought a new Nikon D7100 camera I cannot upload the RAW images from its SC cards. Does anyone have an idea what the problem might be?

Apple occasionally releases software updates to include RAW formats for newer cameras, but apparently, OS X 10.6.8 Snow Leopard (assuming the OS shown in your profile is indeed the one you're using) does not support the Nikon D7100 RAW format:
Mac OS X v10.6: Supported digital camera RAW formats
Upgrading to at least OS X 10.7 Lion would apparently fix that problem.
Digital Camera RAW Compatibility 4.06
Same for OS X 10.8 Mountain Lion
OS X Mountain Lion: Supported digital camera RAW formats
If your iMac can run it OS X Mavericks: System Requirements, OS X Mavericks 10.9 is a free download upgrade, and it also supports the Nikon D7100 RAW format: OS X Mavericks: Supported digital camera RAW formats

Nikon D7100 - RAW (very large files). Lightroom 4 will not allow them to be imported -Help!

I need to edit and make my files smaller etc but they are at present between 20 and 30 mgbites and I cannot import them into Lightroom. Can anyone help me with this problem? I am in Lightroom 4.

Thanks I think I have Lightroom 4 .4 but I will check again on the packet..this belw from someone else about this problem seems to advice Capture NX and a plugin from Nikon??
A quote from another forum I have been reading:-
Have you downloaded the Codec from Nikon. I use both Windows Vista and Windows 7. I downloaded the Codec of the Nikon D7100 yesterday and installed it and I don't have the latest Capture NX, I have the original I brought shortly after buying my D200. I can now use the D7100 files directly into my Capture NX software. ViewNX gives you the basics of Raw editing but Capture NX gives you the advantage of using the U point system. I found this out purely by accident. If you can download the Codec free of charge and pick up a cheap old Capture NX you can get all your EXIF data as well as lense data without any issues.. The Camera companies pay Adobe a license fee for using the Adobe Gamma in their cameras so why should they pay more for file format. Adobe is very protective over its intellectual property so why not with Canon or Nikon. They comply with the consumer trade agreements on EXIF and image authentication. Nikon have cameras in Space which is more than Adobe ever dreamt of. So file format has little or nothing to do with compatibility.

RAW file problem with Nikon D7100

Ijust purchased a Nikon D7100, and I'm unable to upload and edit RAW files(NEF) in Lightroom 3.6. Nikon provided no help. Can anyone offer a solution?

Have you downloaded the Codec from Nikon. I use both Windows Vista and Windows 7. I downloaded the Codec of the Nikon D7100 yesterday and installed it and I don't have the latest Capture NX, I have the original I brought shortly after buying my D200. I can now use the D7100 files directly into my Capture NX software. ViewNX gives you the basics of Raw editing but Capture NX gives you the advantage of using the U point system. I found this out purely by accident. If you can download the Codec free of charge and pick up a cheap old Capture NX you can get all your EXIF data as well as lense data without any issues.. The Camera companies pay Adobe a license fee for using the Adobe Gamma in their cameras so why should they pay more for file format. Adobe is very protective over its intellectual property so why not with Canon or Nikon. They comply with the consumer trade agreements on EXIF and image authentication. Nikon have cameras in Space which is more than Adobe ever dreamt of. So file format has little or nothing to do with compatibility.

Does adobe lightroom open nikon d7100 raw images?

Does anyone know if any lightroom products can open nikon d7100 raw/nef images?

Perhaps your confusion stems from the fact that there are a couple of different lists maintained by Adobe which need to be cross-checked against each other.
List 1
Starting at http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
the Nikon D7100 has been supported since Camera Raw 7.4 and Lightroom 4.4.
So Lightroom 4.4 and later versions support it.
List 2
However, according to this list http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Adobe Camera Raw (ACR) 7.4 is only compatible with CS6 and later.
So CS5 is only compatible with Camera Raw up to version 6.7: therefore CS5 will never be able to open D7100 Raw files. You'd have to use the DNG converter first then use CS5.
So your choices:
Buy Lightroom 5
Upgrade CS5 to CS6
Join the Cloud or the Photoshop Photography Program
Or stay with CS5. Convert the D7100 Raw files to DNGs using the free DNG converter. Then open the DNGs in CS5.

What is use of sim card slot in hp pavilion dv4

i want to know how to use sim card slot in my HP Pavilion dv4 laptop

Hi,
It's a SIM card slot and it's for a SIM card. But to be able to fully utilize/utilise it you also need a WWAN card. What is the model of your machine ? dv4 is a series of many model, most of them do not have WWAN cards built-in.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

"Error while relocating" after deleting RAW from RAW+JPEG pairs (Important FYI)

This is not a question, but something I recently discovered that I think will be important for the Aperture community.
Not too long ago, I asked a question about how to remove the RAW files from RAW+JPEG pairs. The concensus was that it couldn't be done through Aperture, but that one could delete them through the Finder. The answer I got (and that has popped up in other threads on similar topics) was "it's probably not wise, but as far as I know, it won't have an adverse effect." I don't think any response along these lines has been able to point to a specific problem that can arise from such a "hack." Well, I found one today...
It appears that if a user uses Finder to "break" RAW+JPEG pairs by deleting the RAW file and leaving the JPEG (and I assume this goes for deleting the reverse), Aperture will NOT be able to "Relocate Originals..." Instead, "Aperture will return the error: Error while relocating (File not Found): "(null)". I ran into this error the other day while trying to change my file structure by relocating all files. I regularly ran into this error, and it was only after some extensive that I was able to narrow it down 100% of the time to the RAW+JPEG pairs I had "broken." I haven't encounterd any other adverse behavior from "breaking" these file pairings, but this one, at least, could be serious.
So, for future reference, I think the response by the Aperture community when someone asks "How do I delete the RAW file from RAW+JPEG" pairs, should be "Use Finder if you must, but please note Aperture will not be able to 'Relocate Originals..
PS This should NOT be understood as a criticism of those who have responded to this question in the past. There's obviously no way to know about these little quirks until one of us stumbles across them. I hope this information will be helpful going forward, both as a caution when deleting one of the pair, and as a possible answer for the "Error while relocating" message.
PPS I don't think I ran across an explanation for this when I originally searched for the error message bolded above.
If someone has already provided this information, my apologies.

Frank Caggiano wrote:
Interesting the last post before this one you posted was back in May 2011 Removing RAW, keeping JPG?
Thanks for that thread. That helps jog ye olde memory. As such, I would edit my original thread to read "The concensus I gathered from researching multiple responses to questions similar to mine was that it couldn't be done through Aperture*, but that it was possible from Finder though highly inadvisable." I won't bother recreating my research at the time (not even sure I could, since it was more than two years ago), but suffice it to say that the thread you've linked was not my sole encounter with this problem. I do appreciate that you've reminded me that this was not something I had done solely through numerous posts on Apple Discussions. I imagine I likely spent time reading multiple posts here and elsewhere, uncovering the concensus (which i think is still a fair term) that it could not be done through Aperture*, could be through Finder, but was inadvisable.
*This is still accurate, afaik. You cannot delete the pair from a RAW+JPEG pair in Aperture. Exporting, then deleting in Finder, then reimporting is still not something "done in [entirely] Aperture."
Frank Caggiano wrote:
No one actually told you to delete anyting in in the Finder you came up with this yourself as your own solution
This comes from the critical mistake on my part of not making clear that I was paraphrasing multiple responses rather than saying "Bob told on a Monday that i should..." That is one huge mea culpa and I'd edit it if I could. To be clear, my comment that "it's probably not wise, but as far as I know, it won't have an adverse effect" is a paraphrase of multiple answers to the broad question dealing with how Aperture handles files that have been deleted in Finder. At the time, it was known that you could delete a file in Finder, that Aperture could be made to accept that, that it might cause issues further down the road, but that those issues were unkown. I paraphrased that but failed to make it clear that's what I was doing. Again, my apologies.
Frank Caggiano wrote:
So I'm not really sure what it is you are coming back here now to say? There was no 'consensus' to do this, it was your own 'solution'
In this respect, I think you've misunderstood me. At the time I made this post, I still was not seeing a direct connection between deleting files in Finder and adverse consequences in Aperture (or perhaps I should say my searches did not turn up such a connection). As such, I made this post to provide the community with clear evidence of why one should not delete one-of-a-pair files in Finder. Again, I may have simply missed the thread that detailed that to do so would result in a null error when relocating Masters. That said, in July 2013 I had been pulling my hair out trying to figure out why I was getting the null error and I did not see a thread that asked "have you deleted files in Finder" as a way to troubleshoot.
Hopefully, I've cleared up any confusion now. To bring this all back around to my original point for the thread, I intended it to (1) offer a more direct way to troubleshoot the null error on relocating Masters, and (2) to offer a cautionary tale for those who choose to delete one of the RAW+JPEG pair in Finder. There are better (though more time- and space-consuming) ways to get it done, and my original post should help demonstrate why.

Nikon D7100 Import using both card slots Raw + JPEG

Similar Messages

Maybe you are looking for