Nikon D7100

Have just installed Elements 13 but the raw files from Nikon D7100 are not importing. Any suggestions to help?

Sometimes NEFs can get corrupted by using older versions of Nikon Transfer or earlier versions of Nikon software that did not ship with the camera model. As a test you could shoot a few new raw files and try opening directly with PSE13, bypassing any other software or download method.

Similar Messages

Can't open Raw files in Photoshop CS6 using Nikon D7100?

I have a Nikon D7100 and recently did a photoshoot where I shot in Raw. Upon uploading my images and then attempting to open them in Photoshop it came up with a pop up saying that photoshop is unable to open that camera raw file. I have downloaded the adobe recommended converters but those don't seem to work either. Help?

The Nikon D7100 didn't get support until Camera Raw version 7.4; CS6 shipped with 7.0 (and is compatible up until 8.3). Did you go through Help > Updates?
Also, versions of Camera Raw above version 8.3 won't work on anything below Windows 7 or Mac 10.7. You'll have to "upgrade" to at most 8.3 to continue using it on the other operating systems.

How can I open raw files from my Nikon D7100 in CS4 or CS5?

How can I open raw files from my Nikon D7100 in CS4 or CS5?

Andy,
In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
Upgrade the host program version
Use another host program, such as PsElements or Lightroom
Use the free DNG converter, per Curt's suggestion. That is not host program dependent
Glad that the DNG Converter works for you.
Good luck,
Hunt

I have a Nikon D7100 and am having trouble downloading jpegs to my iPad. I get a red exclamation point instead of the green check mark, they dow all show up as thumbnails but won't download

I'm having trouble downloading jpeg files from my Nikon D7100 to my 3rd gen iPad. I see them come up for download and select download and a red exclamation point shows up in the bottome RH corner of the thumbnail instead of the green check

Hey freelance698,
I was able to find two articles that might assist you in troubleshooting the issue:
iPad: Using the iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
iPad: Using iPad Camera Connector with unsupported USB devices
http://support.apple.com/kb/HT4106
Hope that helps,
David

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

I have recently purchased a Nikon D7100 and can no longer use Photoshop CS5 to process RAW files.What are my solutions ?

I am sure this has been asked before for similar new camera buyers, but as I have made a sizeable investment in purchasing PS 5 less than one year ago, I expect ADOBE to have an upgrade available for my new Nikon D7100 camera.
Other Software makers usually have upgrades available to download for new cameras not long after they are released.
I have seen on some photography forums where other users of my camera model have asked the same question as myself without receiving any positive advice other than to up grade to PS 6. A few suggestions do not work or are possibly illegal.
Under consumer laws, in many countries, software makers are obliged to maintain support for a reasonable period of time after release.
Come on Adobe, please help the many thousands of PS 5 and Lightroom users to use the Adobe software that they have purchased in good faith and we will move to PS 6 or 7 or 8 when we are ready.
Can we please expect an answer to this problem any time soon ?

I am sure this has been asked before for similar new camera buyers, but as I have made a sizeable investment in purchasing PS 5 less than one year ago, I expect ADOBE to have an upgrade available for my new Nikon D7100 camera.
Other Software makers usually have upgrades available to download for new cameras not long after they are released.
Why did you purchase an obsolete version? One year ago Photoshop CS6 had already been out a while.
According to this list
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
support for that camera was added with Camera Raw 7.4, which means CS6 at least.
Come on Adobe, please help the many thousands of PS 5 and Lightroom users to use the Adobe software that they have purchased in good faith and we will move to PS 6 or 7 or 8 when we are ready.
This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
Adobe is not in the habit of adding support for new cameras to obsolete versions of Camera Raw.
But it offers the free DNG Converter.
Edit: Adobe - Adobe Camera Raw and DNG Converter : For Windows
And camera makers are free to adopt DNG if they want to make their cameras’ output easily editable with non-proprietary software, but it seems many of them simply don’t want that.

I have been using Aperture 3.3.2 with Mac OS-X 10.7.5. This version doesn't support RAW with Nikon D7100, I decided to upgrade to 3.4. On downloading, it tells me that to upgrade, I need Aperture Vers.3! which I have. What to do??

I have been using Aperture 3.3.2 with Mac OS-X 10.7.5. This version doesn't support RAW with Nikon D7100, so I decided to upgrade to 3.4. On downloading, it tells me that in order to upgrade, I need Aperture Version 3, which is what I have. What is one supposed to do??

Have you moved or renamed your Aperture 3 version? If it is not installed in the "Applications" folder or not named simply "Aperture", then Software Update will not recognize it.
Put Aperture back and "Software Update" should find your version.
Regards
Léonie

I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw. However, it will not download from the "Update" option in CS6.

I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw (I was told that the Camera Raw update 8.3, which is available for CS6, included this camera). However, it will not download from the "Update" option in CS6. I have tried over 10 times - it just says update is not working. and I cannot find an alternate way of downloading this file. So I still can use my camera, even thought I paid to upgrade. HELP please.

What OS do you have? You say you have explained what you had (computer/opsys) but I honestly don't see it here. If you had mentioned that my advice would have been different; I believe you can only upgrade as far as Camera Raw 8.3 on an older Windows system. There is more information here (look specifically for the "Revert to 8.3 ..." titles).
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista
What you've done/written in your last post confuses things further, unfortunately. Photoshop 13.1 is strictly a Creative Cloud version. The highest you can go is Photoshop CS6 13.0.1.3 with perpetual license.
And as far as I can recall, that version can work on Windows back to XP:
System requirements | Photoshop
I don't think you're out of luck, but you seem to be leaping into doing things without having the full story, and are jumping to conclusions a bit too quickly.
Here's what I suggest you try:
1. Remove Photoshop entirely with the Creative Suite Removal Tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
2. Install Photoshop CS6 from your original media or from here:
Download CS6 products
3. Update the application using its own Help - Updates process. That really should get you the latest Camera Raw version that will work. If that does not bring you a Camera Raw that works with your Nikon, use the "Revert to 8.3" instructions above.
-Noel

I can't see .NEF files in finder from mi NIkon D7100. Helllp !!!!!

I can't see .NEF files in finder from mi NIkon D7100. Helllp !!!!!
I can open NEF files in Camera Raw but Im not seeing tumbs in finder !
Also I cant see them in preview too.

Well, I don't know what the problem actually is in the first place, it should work as is, I think something is messed up with the present driver and replacing it would perhaps get around that problem.
It seems like I'd be adding one more layer of complexity to the Vista machine...
Not sure how the Vista machine is involved in this, since these are drivers for the Mac.
Though to involve the Vista Machine, One option not mentioned yet is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

Can't open NEF files in element taken by Nikon d7100

I have element 11 and when I want to open a NEF file taken from my Nikon d7100 camera, it says that this camera raw program doesn't take in charge files from this type of camera. It udes to work, but it just stopped. Why?

Do you mean your Elements 11 used to open D7100 files and quit, recently, or that it used to open raw files from another, older camera but won’t open D7100 files?

I have Elements 10 and a Nikon D7100. PSE10 CR 6.7 does not support the 7100 NEF. How can I get the updates to do this?

I have Elements 10 and a Nikon D7100. PSE10 CR 6.7 does not support the 7100 NEF. How can I get the updates to do this?

The D7100 requires camera raw 7.4 which is not compatible with Photoshop Elements 10.
Your two main options are
1) Buy a newer version of Photoshop Elements
2) Use the Adobe DNG converter to convert the NEF files to DNG files which can then be used by Photoshop Elements 10.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

Nikon D7100 Not Compatible with Adobe CS6

I recently purchased a new Nikon D7100 DSLR camera and was quite surprised to find out that it is not compatible with my Adobe CS5 Standard Edition Suite software.
From the little bit of info I found online, it appears that non-upgradable changes to the Camera Raw component between versions CS5 and CS6 have made my software incompatible with my new camera. This means that with my CS5 Standard Suite I cannot open RAW image files in Bridge or Photoshop.
The only two options I have found so far are:
[1] Upgrade my software to CS6 or CC: For me this is cost prohibitive.
[2] Use Adobe's RAW to DNG converter and then open the image files as DNGs in Bridge and Photoshop: It appears that the DBG converter is reducing the file size and this I assume (rightly to wrongly) that it might also be reducing the image quality. To facilitate maximum options in image post production, I want to maintain the extreme detail that RAW provides. I am not sure if DNG will retail the exact same level of detail and quality. Can anyone shed additional light on this?
[3] Are there any other option that I have missed that would allow me to upgrade the Camera Raw component of CS5 so that it is compatible with newer DSLRs like the Nikon D7100?
Thanks in advance.
Regards
irwin

You have not missed any options for CS5 opening the raw data, directly. The D7100 requires at least CS6/ACR 7.4 or DNGC 7.4 that will make DNGs that will open in older ACR versions.
DNGs may different in size from the NEFs due to differences in lossless compression or a different-sized embedded preview image or even missing Nikon-only metadata in the DNG. In other words, the photosite values for the sensor data should be preserved but the packaging of, or the other data around, the sensor data may be different.
The cheapest option to make PS work with the native raw files is likely PS-CC for $10/month as part of the Photography Plan.
Another option is to purchase (serial number version) or rent (CC Photography Plan version) Lightroom and use it to do what you’d normally do in Bridge and ACR, and then use Edit In Photoshop w/in LR to do finishing touches in your older PS. This option renders a TIF or PSD to disk with all your raw-file adjustments and then passes this file to PS for further editing. The one caveat with buying the serial-number LR is that a new version of LR is probably about ready to come out and waiting until that new version is available would save money.
One thing to consider is that the PS-CS6/ACR 7.x has a new toning model which is an improvement for most images and you don’t have access to that if you’re not using at least CS6.
The reason Adobe doesn’t add new camera support to CS5 (and CS4 and CS3 and CS2 and CS and 7, 6, 5, 4, 3, 2, 1) forever is because they want to be paid for their work, and if every camera update was free forever people would only buy PS, once, and would keep using that without paying anything more until maybe the OS on their computer wasn’t compatible, anymore. This is one reason Adobe went with CC, so people would pay a little continuously and this constant cashflow would better match Adobe paying their employees continuously, instead of having to budget for the future based on how many new customers might buy an upgrade every 1.5 years or so.

How to open Nikon D7100 Raw files in CS5? [was:CS5]

Hi, i uses CS5 and it works well with all my raw file from my Nikon camera untill i got a new Nikon D7100 camera. All files from the D7100 could not be open using cs5 and it says files not supported. Wonder what i need to do in order for me to read those file via cs5?

The D7100 was first supported in Adobe Camera Raw 7.4 which is only compatible with CS6 and later.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Some options:
Upgrade to CS6
Join the Cloud
Join the Photoshop Photography Program
Buy Photoshop Elements 12
Free option: Download the free Adobe DNG Converter, convert all D7100 Raw files to DNGs then open the DNGs in CS5
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Editing Nikon D7100 RAW files in Photoshop CS6

I have downloaded camera RAW 7.4 (DNG converter) for CS6. However, I cannot open my Nikon D7100 RAW files in CS6. Pls. help.

So Camera Raw 7.4 (required to open D7100 Raw files) is not yet installed.
Click Help > Updates to update Camera Raw.

Can I open Nikon D7100 raw files in elements9?

hi
recently purchased nikon d7100. after raw files opened in view window of iphoto, could not import these files. i have attached screen shot from iphoto: I have already downloaded the dng converter. How do i get the unreadable file to the converter
Message title was edited by: Brett N

Nikon D7100 required minimum Adobe Camera Raw 7.4 in order to import and PSE9 support ACR 6.1 to 6.5.
For more information please check following links:
Camera Raw plug-in | Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

CS6 - Camera Raw 7.1 won't open Nikon D7100 RAW files anymore

I have a Toshiba laptop with Windows 7 installed on it.
I use CS6 and a few days ago, I started having trouble when loading files (JPEG & RAW files via Camera Raw). If I loaded more than two or three files, it would crash Photoshop. I tried loading JPEG directly into Photoshop, and it would still crash after 2 minutes. I tried restarting PS, reset my settings to default, restart my PC, and still the problem persisted. I checked the RAM and scratch disks, etc, there was no change with it. I decided I would reinstalled CS6. I did and now Photoshop works perfectly. I can even load JPEG via Camera Raw and it works without crashing. But then, my RAW files won't load via Camera Raw. I have the latest one from what I saw on Adobe's website - Version 7.1.0.354. Others listed are DNG converter but I don't need that.
The RAW files I am trying to open are from a Nikon D7100 camera and before, those same files would open with Camera Raw 7.1.
Can someone please help me out on this. I am a bit desesperate cause I urgently need to edit files on Camera Raw because all my settings are saved on this.
When I open a raw file, this is the message I get:

In any event, Kathleen, you should NOT be using that obsolete ACR 7.1 version. Besides, the Nikon D7100 is not supported by that version, as you have already been correctly told.
Update to ACR 8.6 for CS6 ASAP.
Going through the Help menu in Photoshop CS6 (Help > Updates) will/should update you automatically. If for some reason,the auto updater fails, here's the link to the ACR 8.6 manual install:
Windows
CameraRaw_8_6_Installer.zip
One should never be using anything but the latest version of Adobe Camera Raw (ACR).
Even if you were using a camera supported by your obsolete version, you are leaving a lot of image quality on the table now. The rendering of the more recent versions of ACR is demonstrably superior, starting with 7.4.
It is a shame to be using a decent camera—even if it's not a top of the line Nikon—and be in effect trashing some of its image quality. Really.

Nikon D7100

Similar Messages

Maybe you are looking for