Nikon D800e disconnects from tethered connection

Using LR 4.4, MacbookPro 10.9.1
Not a cable issue. Have similar disconnection problems w/Nikon CC2, CaptureOne Pro.

In my case it's not a cable issue.. and surely not a port issue.. everything works perfect as soon as I reboot into Windows.. it's only with the OSX OS I experience these problems?
I have talked to the Apple support and they have not heard anything about this.. neihter has the Nikon support guys..
So i guess the only way forward is to reinstall the OSX from scratch and start testing with new software installations.. and check if this is caused bu some particular os update or software installation or something similiar??
The only issue here is that it will take forever to do this!!!
The energy saver commet could be something I will look into that before a reinstallation.. I really don't want to reinstallt everything!
I will try with a powered hub too.. that sound reasonable... so some tries before reinstalling..
Thanks for the suggestions..

Similar Messages

  • Undocumented 'random disconnection' from manually connected wireless

    I have got a USB-N13 wireless-N300 dongle.
    According to 'lspci -k' I have the drivers, and I have a wireless interface. So I know that my dongle has drivers but I don't know if they work 100% well.
    I will show the output of various normal commands:
    $ iw dev wlp5s0u1 link
    Connected to <mac address> (on wlp5s0u1)
    SSID: <ssid>
    freq: 2437
    RX: 19939057 bytes (111695 packets)
    TX: 319269 bytes (2813 packets)
    signal: -50 dBm
    tx bitrate: 7.2 MBit/s MCS 0 short GI
    bss flags: short-slot-time
    dtim period: 0
    beacon int: 100
    $ ip link show wlp5s0u1
    3: wlp5s0u1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
    link/ether d8:50:e6:f4:33:24 brd ff:ff:ff:ff:ff:ff
    $ dmesg -w
    [ 6.634808] r8169 0000:04:00.0 enp4s0: link down
    [ 6.634847] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
    [ 6.636405] rtl8192cu: MAC auto ON okay!
    [ 6.648784] rtl8192cu: Tx queue select: 0x05
    [ 7.006529] IPv6: ADDRCONF(NETDEV_UP): wlp5s0u1: link is not ready
    [ 8.751113] wlp5s0u1: authenticate with <mac address>
    [ 8.774294] wlp5s0u1: send auth to <mac address> (try 1/3)
    [ 8.792882] wlp5s0u1: authenticated
    [ 8.794125] wlp5s0u1: associate with <mac address> (try 1/3)
    [ 8.815636] wlp5s0u1: RX AssocResp from <mac address> (capab=0x411 status=0 aid=4)
    [ 8.815672] wlp5s0u1: associated
    [ 8.815712] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0u1: link becomes ready
    [ 265.580381] type=1006 audit(1394469140.822:2): pid=253 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
    [ 265.639231] type=1006 audit(1394469140.882:3): pid=495 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
    [ 272.723778] fuse init (API version 7.22)
    [ 291.938590] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 291.981059] ISOFS: changing to secondary root
    [ 385.885587] hda-intel 0000:00:1b.0: Unstable LPIB (130824 >= 8192); disabling LPIB delay counting
    [ 423.970540] r8169 0000:04:00.0 enp4s0: link up
    [ 423.970548] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
    This is all the information from when I fist see an wireless interface.
    All, I can tell is that my wlp5s0u1 doesn't go down, but a few seconds before I plug in my wireless bridge, or enp4s0, my 'Internet stops...' Or I can't search google, and my youtube stops streaming, conky says that about 30bytes get transfered from that point on, and there is no errors?!
    I'm not on a laptop, and my device's power saver is set to off. And as I'm not getting the second error I don't know how to fix this.
    $ iw dev wlp5s0u1 get power_save
    Power save: off
    (Sorry if this is blatantly obvious, I've only had arch for under a month, with no prior Linux experience, and my dad can't help me with it too!)
    EDIT:
    Please can someone please tell me something that I can try or look into to resolve this, I have a useless dongle now, and an Internet connection that drops at least 50% of the packets.
    Last edited by Peilonrayz (2014-03-12 17:18:43)

    Unfortunately, join the crowd ....
    Wifi connection bad since upgrade to 10.4.10 (SAME PROBLEM IS IN 10.5)
    http://discussions.apple.com/thread.jspa?threadID=1008143&tstart=0&start=0
    Intermittent WIFI with Leopard on Macbook
    http://discussions.apple.com/thread.jspa?threadID=1231631&tstart=0
    New MacBook Pro & Leopard - Airport Connection problems
    http://discussions.apple.com/thread.jspa?threadID=1200966&tstart=0&start=0
    Airport random disconnect
    http://discussions.apple.com/thread.jspa?threadID=970070&tstart=15&start=0
    ... that's a couple of the major threads about this issue, that has been going on since June.

  • Can't disconnect from database connection

    Hello,
    One of our application has been running for over a year on a client network, a windows desktop executable connected to an Oracle Standard One Edition, rel. 10.1.0.2., on a Linux server. Now the executable hangs when the users exit the app. It is build using Oracle Objects For OLE and the culprit is the close method of the ODatabase object. Strangely however, we found out that other applications can’t disconnect anymore:
    Both SQL*Plus and Toad will hang when exiting.
    Also, doing a connection test with the Net Manager hangs when a valid login is used. If I put an non-existing user or a locked one (scott/tiger for example), the server does report the problem.
    I've enabled local client tracing on a user desktop but there are no errors reported, which makes sense since it seems like nothing is coming back.
    The network admin over there swears nothing has change on the network config. So I’m hunting possible cause for this. There are several logs file cluttering up disk space in various folders and this file:
    /home/oracle/OraHome_1/sqlnet.log is now up to 3.1 Mb. I believe I can safely delete this one from other messages I found in various newsgroup. I would be surprise however that disk space is the problem since the windows app works fine, doing query in SQL*Plus works fine. (I only tried Toad to check the disconnect “feature”, not familiar with this tool, but it was showing the schema correctly)
    As a developper, I am however curious on whats happening when a disconnect is sent to the server and what are the expected responses, which don’t seem to be coming back anymore. It really looks like some packets are lost on their way back.
    Thanks in advance,
    Eric

    Many thanks! You hit the problem right on!
    Oddly, I can't even drop or disablee the trigger, SQL*Plus freeze. The network admin will perform a shutdown tonite when nobody is using the software. I'll see if I can drop it then.
    Regards,
    Eric

  • Internet disconnects, wifi still connected but won't send audio to AirPlay Speakers

    This is getting really frustrating. No one has any solutions, there was a UNIX command one that claimed to work for a lot of people, but it ruined my POS software and had to revert back.
    Disconnects from everything connected to the router, but every single other device works fine.  This problem only occurs with my iMac, just like all of the other threads around the internet.

    Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
    Step 1
    Back up all data.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 2
    Reset the System Management Controller

  • IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

    1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
    2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use, 
    3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
    4. After  5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
    5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
    6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
    7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
    8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
    9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
    10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
    KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

    "I get the feeling that this is a software issue that could probably be solved quite easily"
    Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
    !http://i50.tinypic.com/izvwo1.gif!

  • My new Mac Air continues to disconnect from WiFi after going to sleep.  When waking it up I have to manually re-connect.  How do I keep it connected?

    My new Mac Air continues to disconnect from WiFi after going to sleep.  When waking it up I have to manually re-connect.  How do I keep it connected?

    I had this problem too and solved it by doing a clean install. After that it was gone.
    This is a drastic method since it takes quite some time to reinstall lion and all your software.
    Thoughts I had why it started working after a clean install are the following:
    It looked like the airport wasn't able to reconnect fast enough before the connection timed out. So what could have prevented my mac from being able to connect fast enough?
    Apps that consume processor cycles. I love what I would call 'System Enhancers', little apps that enhance my workflow (Moom, Alfred, Dropbox, Default Folder etc). I'm not saying that these are the problem, they might be programmed processor friendly, but check if you have apps that consume processor cylcles. It might prevent airport from being able to reconnect quickly enough before it times out.
    Mobile Config profiles. Another thought I had was that I had a mobile config 802.1X profile installed for the company were I worked. It used TTLS to connect to the corporate network. This profile might have gotten in the way.
    And a sidenote...
    Routers with hardware acceleration might also be a problem. My router is a Wireless Gigabit Router 300N WL-351 and has hardware acceleration. As soon as I activate that my wifi connection keeps dropping. It is as if a Macbook Air can't handle that amount of optimisation.
    That's it, hope it helps those who are still having the problem.
    Best, Jan

  • Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

    I have recently installed a Wireless Router WRT54G version 7 for my home office purpose.
    My home PC and my laptop are connected to it. Especially on my laptop, I have observed frequently getting disconnected from the internet. I need to power OFF the router and power it ON to get the internet connection restored
    Need help to get this problem resolved
    Thanks
    Rohit

    Access set up pageof router .... look for MTU ....change the size from 1500 to 1300 ....click save settings ....
    Click on wireless tab ....change the channel to 11 .....click save settings ....
    Go to advance wireless settings subtab ....
    Beacon interval 75
    RTS & Fragmentation threshold 2306...... click save settings ...
    Click on status check Ip address & firmware version on the same & let me know ...

  • I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a simlar issue like this when loading my movies to my iTouch. iTunes says that all of your wanted content is sync and your iPod says that all content wasn't synced, is that what you are saying?

  • I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers

    I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers. We can still surf the web when it goes down.

    Ok 1st one. The warning restriction message relates to this line in main.cf:
    smtpd_helo_restrictions = permit_sasl_authenticated  permit_mynetworks  check_helo_access hash:/etc/postfix/helo_access  reject_non_fqdn_hostname  reject_invalid_hostname  permit reject_invalid_helo_hostname
    The last reject occurs after the single word "permit" and is ignored.
    However, that's not the problem.
    I'm not exactly sure what's happening, but this might be a clue.
    It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions.  You might need to ramp up the debug level to get a better idea.
    You could check if it's being created by "netstat -a | grep private/policy" in terminal.
    My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up.  Private/policy I think relates to grey listing.  Maybe gives you a hint.

  • Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

    every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

    This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

  • Firefox cannot load websites when connect/disconnect from any VPN connection

    I am consistently uses OpenVPN and RamsesVPN connectivity. But whenever i switch between the VPN connectivity or connect into any VPN or disconnects existing VPN connectivity. My Firefox Browser is unable to load new webpages/Refresh existing open TABS.
    In order to restore, i have to restart my Browser each time, whereas i am not facing this problem with Chrome.
    I am running with Windows 7 Enterprise edition, and latest Firefox version.
    Is there any method to avoid these restarts ?

    Hi, this bug is old, but it has useful info for VPNs
    See for reference Bug 702111
    And there are built in features on the about:config file that you can tweak the number of connections and allowing pipe lining: [http://support.vpnsecure.me/articles/ssh-tunnelling-proxy-troubleshooting/tweaking-firefox-for-best-performance-security Third party information on these connections]
    Other suggestions I have seen are to add bookmarks while logged into either vpn. (For example, bookmark the frequent sites you use in either vpn in separate folders)
    In Firebug, when you connect or refresh the page when moving from one VPN to the other, do you see a termination in the connection to the first vpn?

  • RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

    the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
    really appreciated if someone have a fix for this.
    thanks,
    /dan

    Hey,
    Any proposed answer for this ?
    I face the same problem and my environment 
    and I've got same results as dle2k
    1. TS lic mode is set to per user confirmed it works for windows clients.
    2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
    3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
    4. yes, CoRD works .
    5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

  • Why do I get the error message "iTunes Match could not download because disconnected from network?  I'm connected to the internet during that time with Safari so am I not connected to the network?

    Why do I get the error message "iTunes Match could not be updated because you were disconnected from the network during processing."  I'm on the internet during all of this.  What disconnect is the message referring to?  Itunes is frozen now.  I keep clicking OK but it just comes back with no action.

    Hello FredJay,
    Thank you for contacting Apple Support Communities.
    iTunes Match needs a network connection to work, either Wi-Fi, cellular or wired. See the following:
    Make sure you have an active Internet connection
    Be sure your computer or device has an active Internet connection by loading a webpage using Safari or another web browser.
    On an iOS device with cellular support, if you are not on a Wi-Fi network, try enabling 3G cellular data1 for iTunes Match.
    For iOS 6, tap Settings > iTunes & App Stores > Use Cellular Data > On
    For iOS 5.1.1 or earlier, tap Settings > iTunes & App Store > Use Cellular Data > On
    1Fees may be associated with downloading over cellular networks; contact your wireless carrier for details.
    From:
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/TS4054
    Regards,
    Jeff D.

  • Apple iPhone 4 keeps connecting and disconnecting from new Macbook Pro 13. What is supposed to be done?

    I have a windows desktop in my office and my iPhone 4 works pretty fine and gets charged and gets connected to the iTunes. However, I just purchased a new Macbook Pro 13 this Nov (2014) and I can't seem to connect my iPhone. it keeps connecting and disconnecting. its very annoying. i saw similar posts and threads but there is no resolution! please help

    Hi there ceaselesschat,
    Welcome to Apple Support Communities.
    The article linked below provides a lot of great troubleshooting tips that can help you resolve the issue with your iPhone 4 disconnecting from your MacBook Pro unexpectedly.
    iTunes: Resolve USB-related alerts - Apple Support
    Take care, 
    -Jason

  • Cannot download RAW files from Nikon D800E into CC Photoshop?

    Cannot download RAW files from Nikon D800E into CC Photoshop?

    This is not the same question you posted earlier:
    "I am having difficulty transferring D800E NEF files into Adobe RAW format to use in Photoshop CC? What to do?"
    Perhaps give steps you are trying.

Maybe you are looking for

  • WRX Error-For consumables posting with Acc Assignment K

    We are doing a GR for consumables posting with account assignment category K (Cost centre).  However, while trying to post the document, system issues a message that "Account determination for WRX cannot be determined".  Why this error is coming for

  • Run s a script for to use tmconfig in batch mode failed.

    This is the script for add a server using tmconfig utility: $ more add_server.sh export EDITOR="echo \"TA_SERVERNAME\t$1\nTA_SRVGRP\t$2\nTA_SRVID\t$3\n\" >>$4" tmconfig <<! 4 4 y y q y ubb_new.`date +"%y%m%d"` This is the outpun when I run the script

  • Scanned document: PC = 400 kb, Mac = 16 MB – Help?

    Hello everyone, I do proofreading work and was advised to buy an 'all in one' scanner/fax/printer, etc. as I need to send regularly up to 50 A4 pages of corrected black and white text. A friend who works with a PC suggested a Hewlett Packard 3030, wh

  • IPod syncs fine, new iPhone syncs but only loads apps/no iTunes music?

    My iPod syncs fine but when I connect my new iPhone, it doesn't upload any of the music in my iTunes library. It only loaded the one app I had in the apps section. Ipod loads music library fine. Just don't know why iPhone says sync is complete but do

  • Show mac-address-table

    Given the command show mac-address-table from the privilege exec mode in a cat 2950, the output shows some (i think 4) mac-address tha are system. Do u have any idea what are these mac?