NIKON D800E files not recognized in lightroom 4.4

my lightroom 4 is up to date (waiting for lightroom 5 to be given to me - apparently they are having ordering issues so may take 24 hrs and i need to finish this project NOW)
why does it not recognize NIKON D800E files? is there a way around this or do i have to wait for my lightroom 5 to be delivered?
getting a message saying 'The files are not recognized by the raw format support in lightroom. (517)'
thanks!

That makes sense, especially if the NEFs are also not readable in LR5.
To correct any corruption from using obsolete Nikon software on newer camera NEFs, you can use the utility, here:
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

Similar Messages

Nikon raw files not recognized on CompactFlash card

Hi all,
I inserted my CompactFlash card (containing Nikon NEF files) in a card reader connected to my iMac today. iPhoto opened, showed the card but said there were no photos on the card. Image Capture also shows the card but says there are no images.
Examining the card in the finder showed the images as expected. I was able to copy them to the hard drive. When I imported them from the hard drive into iPhoto, the images were extremely pixelated. These same images open normally in Adobe Camera Raw and Photoshop CS3.
The card and card reader imported fine on an iBook G4 running iPhoto 6.
I tried the following to resolve the issue:
• refomatted the CompactFlash card, shot an image and attempted import
• rebuilt iPhoto library
• deleted preferences for iPhoto and Image Capture preferences in /Library and ~/Library
None of these were successful. Does anyone have any thoughts on further steps I can take to resolve this problem? Any help would be greatly appreciated.

Hi Terence. I initially did not find the RawCamera.bundle in /System/Library/CoreServices. I looked it up in Time Machine and found the version number. I then restored it from Time Machine backup and restarted. All works fine now. Now I need to figure out how RawCamera.bundle got deleted yesterday as I was not messing around in the /System/Library/CoreServices folder.
Thanks much for the help and ideas all.

Nikon D40x raw files not recognized by Lightroom.

Any updates available for the Nikon D40x ?

It has only been supported since Camera RAW 4.1, so will probably come in the 1.1 update.
You can check the list of ACR and Lightroom supported cameras at:
http://www.adobe.com/products/photoshop/cameraraw.html
You can use the Adobe DNG Converter to convert your D40x files to DNG and they will be readable by Lightroom 1.0 and earlier versions of ACR.
Richard Earney
http://inside-lightroom.com

Changes in xmp files not recognized n Lightroom

In my workflow i have setup for changes to be made to the xmp files by a program other than lightroom. In the previous version of Lightroom i had tested this, it worked fine. When i made a change to the xmp file, Lightroom recognized the change and displayed/rendered the image appropriately. Now, I am using version 2.2 and this is not happening. I see the option in th Metadat dropdown menu for "Read Metadata from File". If i click this it works. Is there an option for this to automatically happen that i am missing? If there isnt, why not? Also, I have noticed that Lightroom does not automatically write/update the xmp file if that option is enabled when using the develop module. Can anyone help me with this?

Read has never been automatic, and write is automatic but not instantly - it does it when time is available. You can use synchronize instead of read if you want to, but again, it's not automatic.

Replacing .xmp sidecar files not recognized in Lightroom 3.6- Lr 'Guru' Question Alert!

- I have 'Automatically write changes ino XMP' checked
- I have not moved my catalog or files for years and only continue to add files to my catalog.
ISSUE:
I made some accidental global changes to about 600 .cr2 raw images and to save me time in recovering from each change I made, I closed Lightroom and then deleted the sidecar .xmp files in the folder. I then copied the .xmp files from a backup created and then launched Lightroom again- there was no indication that the metadata had been changed and thought that was odd. I right-clicked on the folder and slected 'Synchronize Folder' and the only option was 'scan for metadata updates' so I tried to synchronize from there- still no changes made to the image previews. The Metadata -> Sync Metadata option was grayed-out so that wasn't an option either.
What I finally had to do was highlight all the files in the Library module and select Photo -> Read Metadata From Files and ONLY after that did the previews update and read from the newly imported .xmp files.
So, my question is WHY did Lightroom not see that the .xmp files were changed as I have experienced in the past?

I would have done Read Metadata from Files as my first choice.
From what you say, the LR metadata data was newer than the XMP metadata date and LR’s metadata updated date was newer than the XMP file-modification date so why would LR overwrite its newer metadata with older XMP metadata with a Synchronize? It might have worked the way you wanted if you had changed the file-modification date to be something current, by using a “touch” command or editing the contents of the XMP files, but LR seems to have done the right thing by not updating its internal metadata from and older XMP file using Synchronize and requiring an explicit command to do so.
It used to be impossible to update XMP files to the current set of edits if LR thought the metadata was current even if you explicitly commanded it to Write Metadata to Files, so Adobe has made adjustments to how LR and sidecars work together.
If LR used to revert edits based on older XMP sidecar files, that sounds wrong, and probably Adobe has fixed things to work in a more safe manner.
Do you remember if you saw an ! on the thumbnails indicating a metadata conflict or was LR completely unaware that the XMP files had been reverted to an earlier copy?

New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

New Nikon Df camera RAW files not recognized in Bridge and Photoshop. Is there a fix? Surely Adobe make a mistake and not keep up with Nikon.

I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
Would post in ACR forum and see if they know anything more. http://forums.adobe.com/community/cameraraw

My lightroom 3 cann't import Nikon d800e files, what I have to do to ?

My lightroom 3 cann't import Nikon d800e files, what I have to do to ?

You need Lightroom 4 or CS6. Otherwise you will have to download the free DNG software and convert images.

Install error during make of Pro*/C++ - file not recognized:

Say, anyone seen this error during install? The file or directory "proc" is indeed missing... is this a known shortcoming of this release? Can these make errors be ignored?
Thanks in advance
Dennis
Starting install Link Phase of component Oracle Internet Directory Client Common Files
Starting install Link Phase of component Required Support Files
Starting install Link Phase of component Oracle Code Editor
Starting install Link Phase of component Oracle Database User Interface
Starting install Link Phase of component Oracle Ultra Search Server Rdbms
Starting install Link Phase of component Enterprise Manager Minimal Integration
Starting install Link Phase of component Object Type Translator
Starting install Link Phase of component Pro*C/C++
Calling Action unixActions10.1.0.3.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /app/oracle/OraHome_1/precomp/lib/ins_precomp.mk
     installTarget = relink
     installArguments = ORACLE_HOME=/app/oracle/OraHome_1,EXENAME=proc,
     undoMakeFileName = null
     undoTarget = null
     undoArguments = null
     logFile = /app/oracle/OraHome_1/install/make.log
     progMsg = Linking proc
The output of this make operation is also available at: '/app/oracle/OraHome_1/install/make.log'
Start output from spawned process:
Linking /app/oracle/OraHome_1/precomp/lib/proc
/app/oracle/OraHome_1/lib/s0main.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
/bin/chmod: failed to get attributes of `/app/oracle/OraHome_1/precomp/lib/proc': No such file or directory
make: *** [app/oracle/OraHome_1/precomp/lib/proc] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Unable to read the list of homes from the inventory.

If your library is in the standard layout of an iTunes folder containing an iTunes Media folder (and you've already copied over the media) then you can simply copy the iTunes library files and album artwork folder across to the new machine recreating the same layout. If the media folder has been split out from the main iTunes folder then see make a split library portable for a way to get the library into a portable form, after which you can copy over the library files.
tt2

Libc.so: file not recognized: File format not recognized

Hi,
While running the "cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install"
i am getting the error.
[appldev@datadev lib]$ cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install
rm -f de60desm /appldev/devora/iAS/6iserver/bin/de60desm
- Linking de60desm executable...
gcc -o de60desm -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib//stubs/ \
/appldev/devora/iAS/6iserver/procbuilder60/lib/detk2.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demsr.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demcl.o \
/appldev/devora/iAS/6iserver/procbuilder60/lib/ui10.o /appldev/devora/iAS/6iserver/procbuilder60/lib/uiicxd.o \
/appldev/devora/iAS/6iserver/rdbms/lib/defopt.o -lde60 \
-lca60 -lucol60 \
-lnvu60 -lnvc60 -lnvs60 -luicc60 -lmmiw60 -lmmov60 -lmma60 -lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -luihx60 -luihx60 -luc60 -luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60 -luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60 -luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60 -lros60 -lrod60 \
-luat60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp /appldev/devora/iAS/6iserver/lib/libpsd.a -lplsf -lplsb -lextp \
-lslax /appldev/devora/iAS/6iserver/lib/nautab.o /appldev/devora/iAS/6iserver/lib/naeet.o /appldev/devora/iAS/6iserver/lib/naect.o /appldev/devora/iAS/6iserver/lib/naedhs.o `cat /appldev/devora/iAS/6iserver/lib/naldflgs` -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /appldev/devora/iAS/6iserver/lib/sysliblist` -ldl -lpthread -lm -L/usr/lib -lm -L/usr/X11R6/lib -lXm -L/usr/X11R6/lib/ -L/usr/X11R6/lib/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext
/appldev/devora/iAS/6iserver/lib//stubs//libc.so: file not recognized: File format not recognized
collect2: ld returned 1 exit status
make: *** [de60desm] Error 1
My OS version is RHEL 5.
Please suggest.
Thanks in advance.

But We are facing another issue while running "cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install"
[appldev@datadev lib]$ export LD_LIBRARY_PATH=/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads/
[appldev@datadev lib]$ cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install
Last few lines Error:
ld -shared -o rwows60.so -z text -G -export-dynamic -L/appldev/devora/8.0.6/lib/ -L/appldev/devora/8.0.6/network/jre11/lib/linux/native_threads -L/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads /appldev/devora/8.0.6/reports60/lib/rxmawt.o /appldev/devora/8.0.6/reports60/lib/rwsows3.o /appldev/devora/8.0.6/reports60/lib/rwswif.o /appldev/devora/8.0.6/reports60/lib/rwswcj.o /appldev/devora/8.0.6/reports60/lib/rwswcs.o /appldev/devora/8.0.6/reports60/lib/rwswm.o /appldev/devora/8.0.6/reports60/lib/rwsws.o /appldev/devora/8.0.6/reports60/lib/rwswcm.o /appldev/devora/8.0.6/reports60/lib/rwswk.o /appldev/devora/8.0.6/reports60/lib/rwswu.o /appldev/devora/8.0.6/reports60/lib/rwswur.o /appldev/devora/8.0.6/reports60/lib/rwswx.o -lzrc60 -lca60 /appldev/devora/8.0.6/lib/nautab.o /appldev/devora/8.0.6/lib/naeet.o /appldev/devora/8.0.6/lib/naect.o /appldev/devora/8.0.6/lib/naedhs.o -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -ldl -lm -lpthread -ldl -lpthread -lm -L/usr/lib -lm -lc
/usr/lib/libc.so: file not recognized: File format not recognized
make: *** [rwows60.so] Error 1
Kindly suggest..What is the document/step you are following?
Thanks,
Hussein

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed. Anyone know the fix?

To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
Inhere find the plist file (user(your user name) / library / Preferences and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

Sony RX1R not recognized by lightroom 5.3. What should I do?

My Sony RX1R is not recognized by lightroom 5.3. In the import window it appears a "no name", and the images on the cam are not recognized. What should I do?

The Sony RX1R was supported beginning with LR 5.0 so LR 5.3 should be ok: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Try taking the card out of your camera and put it in a card reader and then see what happens. If you are already doing this, then try copying the images from the card to your hard-drive using an OS-level function like Windows Explorer or Finder and then import from the HD.
It is possible that there is a Sony driver interfering with the transfer of images directly from the camera to the computer via LR. It is also possible that the images are not being correctly stored on the memory card in the first place so are corrupted before LR touches them—this could be something wrong with the camera or the card.

Mp3-file not recognized on my Samsung SGH-E720 mobile phone

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

Nikon D7000 RAW not recognized-invalid file ?

I loaded Aperture 3 Upgrade Disc. Checked for updates-ran those.Loaded RAW Files- Not valid files.
I then ran Up Date 3.5 Plug in for D7000.Loaded RAW Files- Still not valid files.
I then ran Up Date 3.11.Loaded RAW Files- Still not valid files.
I then tried to run Up Date 3.0 Alert you must have 3.0 or Later.
What is going on here ?
I am a working pro and I am very disappointed what Aperture 3 is doing.
I have written positive articles about Aperture. Looks like I will now have egg on my face.
I need some response from Apple -now.

Hi Frank,
I have a D7000 and experienced the same issue in the beginning with regards to unreadable RAW files, downloaded and patched the Update 3.5 (http://support.apple.com/kb/DL1339) and everything now works fine... Sorry that I don't have a solution for you, but I just wanted to let you know that the patch does work and D7000 RAW files are fully readable by Aperture. If you are indeed all updated with regards to your system OS and Aperture, then I would try and directly contact Customer Support. Good luck.

D610 RAW files not recognized by LR5.3?

I just got a new camera this week - a Nikon D610. I have Adobe Lightroom 5 and have processed my RAW files from my last camera with no problem. However, when I went to import my files just now, it tells me it is not supported. I checked for updates, it said no updates are available (it is version 5.3). I checked to see if D610 is supported and it is. What can I do??

Jao vdL wrote:
You definately should avoid Nikon software products ;-). They tend to be very buggy. Doesn't really matter which version.
My .02:
You should definitely avoid using the older versions of Nikon software which makes raw files unreadable in Lightroom (and definitely use Phil Harvey's utility to fix them after the fact).
But in general, I have found Nikon software products to be very reliable with remarkably few bugs in Windows.
Granted there's not much need for them if you have Lightroom .
Cheers,
Rob

NIKON D800E files not recognized in lightroom 4.4

Similar Messages

Maybe you are looking for