Nikon D810 files

I downloaded the latest ARC file an installed it on my Mac to default directory.
For some reason, I cannot find it to launch the program.
As you can tell I am not that technical. Any help would be greatly appreciated.
Cheers,
Mike

LR doesn’t use the ACR plug-in, only Photoshop.  What are you trying to do, exactly?
You can download the DNG Converter 8.6 RC and convert your NEFs to DNGs, one folder at a time, then those would import in LR, but otherwise, installing a PS plug-in isn’t going to affect LR.
The DNG Converter is part of the CS6 ACR 8.6 RC set of downloadable files at Adobe Labs, not part of the CC set.

Similar Messages

  • Unknown Error message appearing when editing Nikon D810 files on Lr 4

    Hi Guys,
    Recently bought a Nikon D810 and whenever I import files and have a play around with them Lightroom will freeze and then come up with the Unknown Error message. Just wondering if anybody else has encountered this and if so, what you have done to rectify it?
    Thanks in advance,
    Pete

    Then they must be using Lightroom 5. According to the list of supported cameras, support for the D 810 was added in Lightroom 5.6. I seriously doubt that any of your friends are actually using it in Lightroom 4 Unless they are using software to change the camera model in the exif data.
    Camera Raw plug-in | Supported cameras

  • Adobe Camera Raw 8.6 issue with Nikon D810 files

    Just installed ACR 8.6 with D810 support.
    A huge amount of moire is introduced when selecting the following profiles: camera standard, camera landscape, camera vivid, and camera monochrome.
    All other profiles (adobe standard, camera neutral, camera flat, and camera portrait) seem ok.
    The problem exists in Photoshop (via ACR) and in Lightroom 5.6. Please note that Nikon Capture NX-D doesn't have this issue.
    Example: Check the upper portion of the following image:

    I have experienced the same, although having never owned a camera without the olpf, I did not realize that what I was seeing was moire -- I was calling it "color banding" as if shooting with a low bit rate or very small color gamut.
    I think the same issue is referred to in the following post: http://www.dslrbodies.com/accessories/software-for-nikon-dslrs/software-news/acr-86-and-li ghtroom-56.html but he is vague as to just what the "issue" is.
    I noticed this issue not only with acr, but on the back of the lcd of the 810 itself.  Wondering if I was doing something wrong in terms of settings or if it was a bad copy of the d810, I contacted nikon support. They were not helpful and told me to return the unit for repair.   I saw this to a great degree on the lcd, to a small degree even in the raw images processed via Capture NX-D and to some extent via acr 8.6 as you say, when using he following profiles: camera standard, camera landscape, camera vivid, and camera monochrome.  Since I was not able to convince myself tat it was not an issue with the camera itself, I returned the d810, so I was not stuck with a problematic unit or having to wait for a repair.  Now of course I just have to wait for a replacement unit!!
    Again, I am curious as to the extent others are seeing this problem.  I am seeing nothing but superlatives posted by others.  I am hoping that this is some raw processing issue and a bad lcd screen on my original d810, but it seems too big of a coincidence.  If it is a matter of Adobe racing to keep up with the new profiles ok, but if this is the extent that I am going to see moire on a camera of this price then it is not worth the upgrade.
    What are others experiencing?

  • Camera Raw w Nikon D810-PS6 not reading files

    Recently purchased Nikon D810, my PS6 not reading files. Tried downloading Adobe DNG Converter (8.6) as a work around, (but doesn't that reduce your original NEF file to about half?) and that didn't seem to work...Then I tried downloading the PS CC, (which I really didn't want to to do bc I just recently purchased PS 6, but I can't seem to get through the credit card screen... What am I doing wrong and once I do get the subscription, is PS CC now up to speed with these new RAW files for the Nikon?
    I am so frustrated
    Thanks
    K

    Which operating system are you using?
    Photoshop cs6 should be able to open the Nikon D810 files.
    If in photoshop cs6 you go to Help>About Plug-In (windows) or Photoshop>About Plug-In (mac) and click on the words Camera Raw, what version does it say?
    Have you tried Help>Updates from within photoshop cs6 to get camera raw 8.6?
    Also, how are you transferring the nikon nef files to your computer?
    I ask because older versions of nikon transfer can corrupt the nef files in such a way that the photoshop camera raw plugin will not open them.

  • Nikon D810, NEF problem existing.

    I have a new Nikon D810 and photos with Photoshop can not support NEF file.

    Which version of photoshop and operating system are you using?
    If your using photoshop cs6, cc or cc 2014, then Help>Updates from within photoshop should get you camera raw 8.6, which should enable photoshop to open the nikon D810 files.
    Camera Raw 8.6 and DNG Converter 8.6 Now Available

  • How to Install Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera

    I need someone to walk me through how to install a Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera.
    I haven't used photoshop in ages and I got a new camera. I have been on the phone with Adobe (no help) and spent a couple of hours online trying to figure this out. I'm confused, frustrated and about to throw my computer out the window.
    Also, I placed this in the "Photoshop for Beginners" since Photoshop CS5 doesn't appear anymore. I know CS5 is outdated but I spent hundreds of dollars on this program and you would think adobe would still honor its product.
    Any guidance is much appreciated.
    AJ

    Odds are cs5 is too old. If you do a search on my the main Adobe website there is a list of compatible cameras for the last known update to camera raw for cs5.
    Each version of Photoshop only gets so many updates for camera raw then it is necessary to upgrade Photoshop to get the next update for camera raw.
    So you currently have 4 choices.
    1 upgrade Photoshop
    2 get Lightroom - latest version
    3 get Photoshop elements -latest version
    4 get dng converter - this will download the latest version an is the only option that is free.
    The dng converter can be found by searching Adobe website.

  • Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

    Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get photoshop error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Bridge at all.  What am I doing wrong?

    Camera Raw plug-in | Supported cameras

  • Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

    Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

    In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
    Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
    I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
    Having 2 versions of ACR will cause problems.
    You have already downloaded DNG Converter 8.7.1.
    Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
    Be aware that DNG converter is a stand-along application and not a plug-in.
    You need to open DNG converter at select the FOLDER that contain your .NEF files.
    Don't open the folder and try to select individual files, it doesn't work that way.
    After converting your D810 files to DNGs you can then open the DNGs in CS5
    The problem is your camera didn't exist when CS5 & its version of ACR was developed.
    i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

  • Using Lightroom 5.7, Raw files become from my Nikon D810 become corrupted when I select them to view or edit.

    .Updated to Lightroom 5.7 to accommodate the Nikon D810. Upon importing RAW files to the files become corrupted when they are selected to be viewed or edited.
    I am using Windows 7, 64 bit, with 8 GB Ram.
    Any help would be appreciated.

    There are several likely sources of corruption, and video card would be far down on my list of possible suspects.
    The transfer from camera card to hard disk is the most likely place for problem, either the card reader or USB cable can go bad. Another likely source of problems is the computer's hard disk is starting to fail. The camera card itself may be bad. And lastly, the memory in the computer may be malfunctioning.

  • Raw files for nikon d810 not showing a picture in preview. Have  camera raw plug in 8.6.0.250 . File will open in raw but no picture ahead of time.

    Raw files for Nikon D810 not showing a picture in preview for photoshop cs6 . Have camera raw plugin 8.6.0.250  File will open in ACR and process but no picture before opening raw file.

    Are you referencing Apple's Preview application or the Preview panel in Bridge?  Huge difference.
    Try purging the cache for the offending folder(s) through the Tools menu in Bridge.

  • Camera Raw 4.6 Update & Nikon D810 NEF File Issue

      Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get photoshop error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Bridge at all.  What am I doing wrong?

    8.6 Camera Raw plug-in | Supported cameras

  • Hello, I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

    I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

    Can you describe what “the operation is failing” means?  What is happening and how is it different than what you expect?
    Also, what product are you trying to update manually, and do you have a link to the page of instructions, so we know what your attempting to do?

  • Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

    Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

    See for yourself which version of ACR is needed for that camera’s RAW files
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    then check your version (Photoshop > About Plug-In > Camera Raw).
    Your version of Photoshop does not support that version of ACR.
    You could use the free DNG Converter.

  • NEF to DMG file conversion for  Nikon D810 and D800 cameras?

    How do I open a Nikon D810 .NEF file and convert to a .DMG in Photoshop CC?

    Do you mean DNG (Digital NeGative) instead of DMG?  If so, then you need a version of the camera raw plug-in that is new enough to support the D810 and then you can use the Save Image function in ACR to save a DNG.
    If your intent is to convert many NEFs to DNGs then the standalone DNG Converter program may be more efficient.
    The current version of ACR plug-in and DNGC are 8.7.1.  You can update the ACR plug-in by using Help / Updates in PS-CC (or log out and log back into the CC Desktop app) and you can get an updated DNGC from the Adobe Updates page:
    http://www.adobe.com/downloads/updates
    If you mean a Disk-iMaGe file then that’s something completely different and beyond the scope of Photoshop.

  • How do I set up Premiere Elements 12 to open Nikon D810 NEF, RAW files?

    I'm running a Windows 8.1 computer with Premiere Elements 12.  New Nikon D810 RAW files will not open in program.  Is there a plug-in or other fix for this?

    gsorozan
    You cannot import Nikon D810 nef files into Premiere Elements 12. For that you need to have Camera Raw at least 8.6 which is supported by Premiere Elements 13. So, if you want to import Nikon D810 nef files into Premiere Elements, you need Premiere Elements 13.
    However, if you convert your Nikon D810 nef files into dng files with the DNG 8.6 converter, you can import those dng files into your Premiere Elements 12.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
    References
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    I road tested the above to confirm. It worked for me. Please let us know if the above worked for you.
    Thank you.
    ATR

Maybe you are looking for

  • GL Center is a required field!  Check file definition format in file header

    Hi I am new in Hyperion FDM. I am trying to load a txt file using multiload feature of FDM. I have created a VBScript to load data. When i run the script it finishes without error but doesnt load any data. I get the following errors in the log file *

  • How to club the amount field for the particular customer from file

    Hi , In my BDC i am getting the Amount field which is need to be put in the Header data . For 1 Customer there are more than 5 line in amount field in the Excel file. For the Particular Customer , I need to club all the amount ffield and put it into

  • What would be easier, Help ?

    I want to get the new iphone 4 but am confused with what will be easier.  I have a family share plan with my mother and want her to sign the assumption of liability so I can take over my line (I'm the secondary user) At first when we tried to do this

  • 8.17 on XP ?

    hello is there any chance to install 8.17 on XP? thanks in advance

  • PDF: Adobe Interactive forms pops up SAVE AS dialouge box after modification

    Hi, We have developed Adobe Interactive form uisng Adobe LiveCycle Designer. After creating pdf, whenever I change data in the interacvie form, it is poping up "Save As" dialouge box everytime user saves data. So User is replacing the same file again