Nikon D90 and ipad connection through USB

i can't get the nikon d90 to speak to my ipad through the camera connection kit.
-hardware works, i can connect my phone through the jack
-i've had luck with the SD card connector in the past, but it's sadly been misplaced
-my USB to USB mini cable works to power my ihome speaker
-when the cable is connected to both the ipad and the camera the playback menu on the camera greys out.
-i've gone through the standard connect/reboot/wait thirty seconds troubleshooting with no luck. 
sorry for the point form, this is the third time I've posted this question and the website keeps deleting my text. ;)
I am overseas and really want to get my photos onto my ipad for posting.  i'm wondering if i'm making a really stupid error, and hoping that I am before I go out and buy a new camera connection for the SD reader, or replace the cable.
Thanks everyone!

Thanks for responding so quickly!
Unfortunately I'm overseas so I can't try it out on my computer. (part of what's really frustrating is that I should have tried it out before I left home)
The camera recognizes that it's connected to something, in that the menu greys out whenever it is connected to the ipad, but that's all that I can see so far.

Similar Messages

  • I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
    iPad: Unable to update or restore

  • WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE

    I have an iphone 4, iOS 7.1.2
    Mac book pro 13in Mid 2012, with OS X VERSION 10.9.4, Processor speed 2.9 Ghz, Memory 8GB 1600MHz DDR3, Intel core i7, Storage capacity 750 GB, 650 GB available.
    WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE.

    Hello skkmmayer,
    That is probably a lot of stuff you do not want on your iPhone. So this can be handled a few different was. For you current situation, you can delete the apps directly on your iPhone by holding on the app until it starts to jiggle and then tap on the X of all the apps that you do not want. The second thing you can do is before you sync with iTunes, look at the app section on your iPhone to know what gets transfer to it and you can deselect items that you do not want. Lastly, if you download content on your iPad and it is a universal app, you can actually download it directly to your iPhone by looking at your past purchases and download it directly from the App Store. Check out the articles below for more information if need further assistance. 
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    iTunes 11 for Mac: Sync and organize iOS apps
    http://support.apple.com/kb/PH12115
    Download past purchases
    http://support.apple.com/kb/HT2519
    Regards,
    -Norm G. 

  • My mini iPad is now not working . just showing iTunes sign and to connect to usb cable.

    my mini iPad is now not working . just showing iTunes sign and to connect to usb cable. I have done that buy macbook is not discovering iPad as a device.  Any ideas ?

    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
    Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
    http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
     Cheers, Tom

  • Error message -1073807298 when connecting through USB

    Hi,
     I am trying to retrive data from an instrument through serial port as well as USB,
     My vi works smoothly while connecting through serial port.
     But when i try to connect through USB Error code-1073807298
     is coming. This error comes when visa try to write to the instrument.
     From visa configure serial port.vi  no error is coming.
     Can someone suggest a method to solve this problem... 

    I get exactly the same error code with a TCP raw socket connection, the weirdest thing is that I actually can read the result of the query. I fixed the problem reading one byte at a time but this is very inefficient (it uses a while loop) and I still get warnings, so I'd like to know if there is a way to fix this or if there is an equivalent of the "Serial Settings: Number of Bytes at Serial Port" for VISA TCP connections....
    This is the WARNING that I get when I read one byte at a time:
    Warning 1073676294 occurred at VISA Read in LV.vi
    Possible reason(s):
    VISA:  (Hex 0x3FFF0006) The number of bytes transferred is equal to the requested input count. More data might be available.
    This is the ERROR  that I get when I set the byte count to 1024:
    Error -1073807298 occurred at VISA Read in LV.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF003E) Could not perform operation because of I/O error.
    I enclosed the VI for your review,
    Thanx in advance for your help,
    Attachments:
    LV.vi ‏22 KB

  • Windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

    windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

    There are a number of posts related to copying issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
     To change the LAN Manager authentication level:
    From the Windows Vista / 7 desktop, click Start
    Search for: security
    Click 'Local Security Policy'
    Goto Local Policies > Security Options
    Under Policy, double-click 'Network security: LAN Manager authentication level'
    Change level to: Send LM & NTLM responses
    Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
    De-select 'Require 128-bit encryption'
    Click OK
     To disable Windows Search:
    Start > Control Panel > Programs > Programs & Features
    On the right-hand side, click "Turn Windows features on/off"
    Scroll down, and de-select "Windows Search".
    Press OK, close all windows and restart.
     A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

  • I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS.  I heard there was a plug-in to download for this, but cannot find it. Help?

    I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS.  I heard there was a plug-in to download for this, but cannot find it. Help?

    You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
    The DNG Converter can be found, here:
    http://www.adobe.com/downloads/updates.html

  • Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

    Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

    Fixed it. It is on Chevrolet's end. Press config to access the configuration settings. Turn menu/tune knob to highlight vehicle settings. Press menu/tune to select the vehicle settings menu. Choose return to factory settings.

  • Logging inbound and outbound connections through my Linksys router

    Hi There,
    I have a  Linksys wireless router (WRT54G series) that I use to connect to the internet with my cable modem. I would like to be able to configure my home network to log inbound and outbound connections through my router. 
    My router, which I bought brand new a couple of years ago, provides some very basic logging through its administration interface.  I can view a current log of very recent (within the past couple of minutes) inbound and outbound connections/traffic.  However, I would like to be able to configure my network to log all inbound and outbound traffic for at least 1 or 2 days and have this log saved somewhere so I can retrieve and review it at a more convenient time.  I haven't been able to figure out how to do this with my current Linksys router and would like some help in configuring my system.
    Is it possible for me to configure (perhaps with a firmware upgrade or even by replacing my older Linksys router with a newer one) my router to continuously log a day or more's worth of inbound and outbound connections?  If this is possible, what changes do I need to implement?  Does Linksys offer a wireless router that has more sophisticated logging capabilities?  What is the longest log period that I can create with a Linksys router?
    If it's not possible to create such a log with my router, then what other components would I need to log this information?  I've thought about setting up a Linux server with two network cards installed to act as a gateway between my router and cable modem which will log traffic.  Would this be a good strategy to implement logging?
    Thanks in advance.
    Tom
    Message Edited by   on 07-28-2007 07:44 AM
    Message Edited by   on 07-28-2007 07:50 AM

    well...the router's in-built log will only provide basic information about the incoming/outgoing log . So, it will be a good idea to install a separate log viewer .....

  • Mac and iPad connect to wifi, iPhone will not. I have tried all resets besides the full erase reset and nothing seems to work. Any suggestions?

    Mac and iPad connect to wifi, iPhone will not. I have tried all resets besides the "erase all contents and settings" and nothing seems to work. Any suggestions?

    http://support.apple.com/kb/HT1414
    I would honestly try this. It is how to restore your phone and see if it works.

  • Mic Connected through USB adapter gives High pitch voice in playback

    My mic is connected through a usb adapter but when i play my track back in Garage ban after recording I get this high pitch fast chipmunk voice.
    And My mic works fine with quicktime audio recording or other audio recording software.

    hello32 wrote:
    My mic is connected through a usb adapter but when i play my track back in Garage ban after recording I get this high pitch fast chipmunk voice.
    most likely the sample rate of your audio interface is too low, it must be set to 44100 in Audio MIDI Setup utility.
    similar to the issue of an imported file playing too fast/high pitched:
    http://www.bulletsandbones.com/GB/GBFAQ.html#toofast
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • IBook and iPod connection through Firewire

    I looked for a thread on this all over, but couldn't find one, so I'll just post and see what comes out of it. Maybe someone has some idea what is wrong.
    I'll try to connect my iPod to my iBook with the Firewire cable that came with it. It won't connect to my iBook. The iPod will charge, but not show up on the desktop or in iTunes. Through USB it's just fine. I know I could just use USB and be fine with it, but my iPod doesn't charge through USB since it's a Third Generation iPod. Any ideas why this is happening would be much appreciated.

    I did try connecting my iPod with another Firewire cable. It still didn't work. I also have a Pocketdrive that didn't connect to my computer through Firewire. I do, however, have an external Firewire HD that has it's own power source that connected without any problems.
    I found an article at Macfixit that said to reinstall 10.4.3 with the combo updater and then repair permissions. I just tried it and it didn't do any good.

  • Nikon D90 and camera connector

    Help, I have a Nikon D90. I am told it should work with the Ipad Camera connector. Every time I do as told in the instructions. The camera file shows up, and then disappears or crashes. I called the Tech group and the guy said if it did not work there was nothing I could do. My D90 is less then a year old, so it should work like everyone else's. Can someone help me with this, i think the tech guy did not have a clue.

    The card reader works fine. I just do not know why everyone has luck using theirs with the D90, and I cannot get it to work. There has to be a settings issue or something.

  • IPhone and iPad connected but not with iCloud??

    When I updated to iOS 6.1, I was asked if I wanted to connect all devices. My mistake was selecting yes!
    I have an iPhone and iPad I just got for Christmas; I was using the same email on both devices for iMessages but I hate receiving all messages on both devices.
    So, I tried to change my email for iMessages on the iPad but when I tried to delete my current email, I received a message that says I will no longer be able to receive emails on any device!
    How can I undo this? Please help!!

    If the process isn't finishing for you there's not a lot you can do to force it. Perhaps a visit to the nearest Genius Bar? I don't know. Sorry I can't offer more constructive advice.
    How long are you waiting on step 2? Depending on the size of your library and the speed of your internet it can take a few minutes, a few hours or even days.

  • Nikon D90 and CS2

    Now that I bought a new Nikon D90 camera, I started trying to take photos using Nikon's RAW mode (.NEF). However, my Photoshop CS2 cannot open them the .NEF files. I have read on these forums about downloads that are available for different Photoshop versions and different cameras, but don't know which download would apply to my Nikon/Adobe combination. The Nikon D90 is not listed. Your help would be appreciated. (I use Windows XP.)

    Your camera was released long after development for Photoshop CS2 and ACR 3.x had been discontinued. There will never be direct support for your raw files in Photoshop CS2. You would be wise to upgrade to Photoshop CS4, which does support your camera, and ACR is much more robust. If that is not an alternative then you should download the latest version of the DNG converter and use it to convert your NEF files to DNG files. Then you will be able to want to those files in Photoshop CS2 using ACR 3.7.
    I should have known that Ramon would beat me to it. :)

Maybe you are looking for