Nikon in-camera multiple exposure RAW in Photoshop trouble

I have a Nikon D7000, I use Photoshop CS5. I took multiple exposures in-camera in RAW and they appear fine on the back of my camera, and in the finder window on my Mac, but when uploaded and viewed through Bridge and Photoshop the images are monochromatic RED in color. I have contacted Nikon and they say they can not guarentee compatability with 3rd party software. No amount of editing, that I have found, returns the colors to where they should be (NOT RED). I only found one other discussion board adressing this issue, It was a Nikon, possibly D80(not sure, dont remember) no one left an answer on it and it was from 2011. Please help me figure this out, or update the RAW compatability please!!! thanks

I tried uploading the orgional RAW of this test shot before I took the real ones, but of course it was too big, so here is the JPG convert. On another shot (under camera calibration settings) I was able to get rid of much of the red, but most of the real color was lost and dark, and playing with saturation and other settings outside of camera calibration didnt do any good. Again the RAW looks fine in the on-camera thubnail preview and in the Mac finder window, but not in the ADOBE programs. THX for any help...

Similar Messages

  • In-camera multiple exposures

    I don't seem to be able to use my Photoshop CS5 and Camera RAW to process my in-camera multiple exposure RAW photos. When imported, they have a reddish cast to them. This is not happening in other programs nor with regular RAW photos. Only multiple exposures made in my camera. Any suggestions?

    What camera do you have?  I use multiple exposures all the time with my Nikon D3 and D3X with no issue opening them or correcting them in ACR.  I was doing this with CS5 for a long time.  One thing about multiple exposures, if your white balance changes - at least with my Nikons - if usting auto white balance, it will apply the white balance of the first exposure to all the other exposures.  If you white balance changes, a better option would be to take separate exposures and combine them in PS with the lighten blend mode or put them into a SO stack and use Mean or Mode.

  • Will LR4.3 reconize Nikon 3200 camera?

    I just bought a Nikon 3200 camera and shoot RAW.  I tried to transfer the files to my Windows 7 computer but it does not start autorun as it does with my other Kinkon cameras.  Itried PSE8 and it said it uploaded but I can't find the images.  I created a file which shows LR files in it but it will not open with LR or PSE.
    Any chance this can be fixed?

    Do I understand you correctly that in Win 7 and PSE you can see the photos when you connect the camera but in the Import Dialog in Lr you cannot?
    Is this by chance not an approved memory card? I don't know if Lr would be bothered about a non-approved card.
    These are the Nikon-approved cards for the D3200:
    Back to Lr:
    In the Import Dialog, top center, do you have <Copy> selected?
    <Copy> is for importing images from camera / memory card;
    <Add> is for importing images that are already on one of your hard drives and you do not want to change their location;
    <Move> is for importing images that are already on one of your hard drives and you do want to change their location.
    There is a workaround that hopefully works:
    Using Windows upload the photos into a folder of your choice. Then Import them into Lr from this folder.

  • Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?

    Why I cannot open raw files (NEF) from camera Nikon D3200 through Adobe Bridge and/or Photoshop ?

    Thanks for the tip. It worked out perfectly.
    De: ssprengel [email protected]
    Enviada em: terça-feira, 14 de janeiro de 2014 19:14
    Para: Aecio Paes Leme
    Assunto: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
    Re: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
    created by ssprengel <http://forums.adobe.com/people/ssprengel>  in Adobe Camera Raw - View the full discussion <http://forums.adobe.com/message/6012775#6012775

  • New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

    New Nikon Df camera RAW files not recognized in Bridge and Photoshop.  Is there a fix?  Surely Adobe make a mistake and not keep up with Nikon.

    I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
    Would post in ACR forum and see if they know anything more.  http://forums.adobe.com/community/cameraraw

  • New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

    New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.  If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially.  Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time.  How do I fix this?

    If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

  • Why does Camera Raw 6.7.1 w/ Photoshop CS5 not convert raw files from a Nikon D610 camera?

    I just upgraded  my Nikon D90 camera to a D610.  I've been using Adobe Bridge to manage my photos made with the D90, and Camera Raw 6.3 to convert the raw files for use in Photoshop CS5.  The new D610 writes different raw files, so I upgraded Camera Raw to the latest version (6.7.1) which is said to be compatable with the latest Nikon cameras. 
    The D90 files still convert fine with Camera Raw 6.7.1, but the raw files from the D610 cannot be read.  Does anyone have any insight into why not?
    Thanks,
    JoelP

    There will not be another update for Camera Raw 6.x which is the version that is compatible with Photoshop CS5. So you will not have a way to natively open your NEF files from the Nikon D610.  But you can download the DNG converter (version 8.3 RC) from Adobe Labs and use it to create digital negative copies of your NEF files. And then you can use those with the Camera Raw that you already have. Other alternatives would be to upgrade to Photoshop CC, or Photoshop Elements 12, or add Lightroom to your workflow. If you choose Lightroom you would have to use the 5.3 release candidate at this point to have support for your camera. It will, of course, be supported in the final version of Lightroom 5.3 as well as all subsequent versions of Lightroom.

  • I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files?

    I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files? Cheers!

    What version of Photoshop are you running?  You will need at CS5, CS6, CC or CC2014.  Each version needs a different ACR-plug-in to open files from that camera.
    If you are on CS4 or earlier, you'll need to upgrade—or, in the alternative; look for, download, instal, launch and run the free, stand-alone DNG Converter 8.6 on each file of raw NEF files to convert them to raw DNGs first so you can open them in your version of Photoshop and ACR plug-in higher than 2.4.

  • How do I convert my Raw Filws taken from my new Nikon d750 camera using Photoshop Elements 11??

    How do I convert my Raw Filws taken from my new Nikon d750 camera using Photoshop Elements 11??How do I convert my

    The D750 isn't yet supported. It may be a few weeks before Adobe provides an update for the latest versions of Photoshop/Elements. Maybe October/November.
    They usually provide a pre-release version a few weeks beforehand (any day now, hopefully), but AFAIK they don't usually work on Photoshop Elements.

  • Photoshop CS5- raw files from Nikon D600 camera.

    I need to know how to get Photoshop CS5 to read Raw files from my new Nikon D600 camera.  I do NOT want to have to buy another version of Photoshop or have to buy Lightroom.  This is really distressing me!

    I think that if a camera manufacturer is convinced that their proprietary software gets a better result from their RAW data than Adobe’s ACR it is only fair that they try to get their customers to use their software.
    For many users the potential difference in quality seems to be utterly irrelevant, though, and they are simply being inconvenienced.
    But fortunately for the camera makers many of those users seem to blame Adobe … even though with DNG Adobe has already provided a format that they could use if they wanted to make their data more open.
    If using DNG Converter really is an
    annoying extra step
    for you I think the Adobe employee’s advice was basically correct and you may need to purchase the current version of Photoshop (or Lightroom).

  • I reinstalled photoshop CS5 on my new laptop . I'm unable to update camera Raw to add Nikon D7000 camera .

    I have reinstalled Photoshop CS5 extened on my new Laptop . I had deactivated and un installed the program from my pc first .I cannot update camera raw to include my Nikon D7000 camera . I now have hundreds of NEF Raw files which I cannot open in Photoshop .

    Hi
    Thanks for the info . The problem is it appears to me that you can only convert to dng while importing from the camera in bridge . My files have been imported and I can't see how to convert . As adobe don't support CS5 I think I'm snookered .
    Thanks
    Dave Walton

  • Why does my Photoshop Cs6 not let me view my Nikon D7100 photos in Camera Raw and photoshop when it does my Nikon D700?

    Why does my Photoshop CS6 not allow me to download my Nikon D7100 photos into camera raw and photoshop when it does my NIkon d700?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    D700 first supported in Adobe Camera Raw (ACR) 5.1 (CS6 ships with ACR 7.0)
    D7100 first supported in ACR 7.4
    You probably just need to update Camera Raw in CS6 via Help > Updates.
    Confirm which ACR version you have installed via Help (Win) or Photoshop (Mac) > About Plug-In > Camera Raw.

  • When will Camera Raw and Photoshop support Nikon 610 cameras

    When will Camera Raw and Photoshop support Nikon 610 cameras

    Hi,
    What version of photoshop and operating system are you using?
    Photoshop cs6 and photoshop cc should open those files.
    You might just need to go to Help>Updates from within photoshop cs6/cc to get an updated camera raw plugin
    Camera raw 8.3 or 8.4, depending on your operating system.

  • Why does photoshop 12 editor open my Nikon D90 Camera RAW files only as jpegs???

    Why does photoshop 12 editor open my Nikon D90 Camera RAW files only as jpegs???

    Hi,
    Which operating system are you running on?
    What makes you think that the raw files are being opened as JPGs?
    Do you shoot RAW+JPG and opening the JPG files bt mistake?
    If you are opening a RAW (NEF) file and it doesn't show the Camera Raw screen but goes straight into the editor then it may be that your screen resolution is too low.
    What is your screen resolution?
    Brian

  • How to Install Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera

    I need someone to walk me through how to install a Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera.
    I haven't used photoshop in ages and I got a new camera. I have been on the phone with Adobe (no help) and spent a couple of hours online trying to figure this out. I'm confused, frustrated and about to throw my computer out the window.
    Also, I placed this in the "Photoshop for Beginners" since Photoshop CS5 doesn't appear anymore. I know CS5 is outdated but I spent hundreds of dollars on this program and you would think adobe would still honor its product.
    Any guidance is much appreciated.
    AJ

    Odds are cs5 is too old. If you do a search on my the main Adobe website there is a list of compatible cameras for the last known update to camera raw for cs5.
    Each version of Photoshop only gets so many updates for camera raw then it is necessary to upgrade Photoshop to get the next update for camera raw.
    So you currently have 4 choices.
    1 upgrade Photoshop
    2 get Lightroom - latest version
    3 get Photoshop elements -latest version
    4 get dng converter - this will download the latest version an is the only option that is free.
    The dng converter can be found by searching Adobe website.

Maybe you are looking for

  • How can I print to hp photosmart all in one 7280 from ipad

    How can I print to hp photosmart all in one 7280 from ipad This question was solved. View Solution.

  • Is Adobe Director the software for me?

    Dear programmers and developers. I have a small project, and I would like to know, if Director is suited for me to do this work. I am to make a small CD-presentation containing a catalogue for a small music-booking agency. I have thought it out as a

  • Album grouping not working consistently

    After I've created new tracks for existing albums I want to group them with the existing albums. I do this by setting the album name and the artist and album artist to names of the existing album. Sometimes this works and sometimes it doesn't. When i

  • Join Configuration Problem

    Hello, When I am selecting fields from different table for a perticular Business area.. I get the follow ing probelm. "Join Configuration Cannot be resolved. Reason: more than 1 detail detail folders uses non-aggregated items" I am not sure what this

  • Canon LBP2900 can't print on OSX 10.9.2

    The printer always pause when printing. I also tried LBP2900 patch after installing CAPT 3.65.  The printer can add but everytime i print, it changed to PAUSE.