Nikon P7000 does not show up as a drive in Finder

When I plug in any of my cameras or other devices, they all show up as a drive in finder, except for my Nikon Coolpix P7000 camera. Only Aperture and iPhoto can see the files on it. If I shoot a movie on it, I can't get it into iMovie or FCE without first copying it from iPhoto.
Anyway to make this camera show up as a drive so that I can move and copy its files directly without using a card reader?

I'm not going to ask how old.
I have a P300 as well as the D7000 that shot movies and I just import it from the camera to a folder of my choosing and then open up the app that I want to import it to, since there are a few apps out there you could use,Nikon included.
You should'nt have to remove the card since I use a USB cable on both mine.
Times change fast with computers and hardware. Gotta keep up or you get left behind.
Message was edited by: worksafe

Similar Messages

TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?

My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?

Hey, Thanks a lot. It took quite a bit of time to resurrect this ipod. I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new. This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted. Finally, it recognized my ipod and started to download each song. It took awhile as there was 602 songs, but finally it works. Yea!!! I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information. This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone. Take care, Karen

Keynote file (OSX 10.9.5) does not show up in iCloud drive

I have created a keynote presentation, using OS X 10.9.5, saving it in iCloud. The next day I wanted to continue to work on the presentation. But it does not show in iCloud Drive, whereas Keynote states, that the file is stored in iCloud Drive. That´s very annoying. What can I do?

https://www.apple.com/ios/whats-new/icloud-drive/
Read where it says Yosemite (10.10) is required.

Disk Utility does not show my internal hard drive.

Recently, my Macbook Pro crashed.
THE PROBLEM
1. I turn it on, it starts normally at first, the Apple Logo Shows for several seconds
2. It changes to a no-smoking sign without the cigarette
3. If I try to boot safe mode, a folder appears with a question mark
4. If I try the internet recovery, I get to the part where I can restore OSX, use disk utility, etc.
5. When I try to restore OSX, it doesn't show my hard drive as avilable to install upon - no drives are shown
6. When I try to use disk utility, it only shows my Mac Base System, totaling 2GB, I cannot do anything.
THE QUESTIONS
1. What do I do? Thoughts? How do I recover my hard drive data before sending this computer to Apple to fix?
2. How can I use an external enclosure to recover my data using my desktop? What cords do I need? What is a good drive? Is it hard?
3. My SD card slot shows, could I install OSX on that and try to load my OSX to gain access to my harddrive that's missing?
4. Why would my main hard drive not show? I'm supposed to have a 250GB hard drive.
5. Is there anything I can do on Terminal to try to make my full hard drive appear? Or gain access?
6. What will Apple do with my RAM that I installed? I upgraded to 8GB? Will they just return as is?
Thank you.
Model: MBP from Mid-2010 13" running OSX Mountain Lion 250GB HD

Youre working the wrong end trying to revive a dying drive, a replacement is only $65
Did you have a backup of your vital data?
Terminal isnt going to do anything to help your HD.
questions:
1. get a new HD, install OS........recovery internal HD data using another computer and throwing the internal HD into a USB enclosure to extract data......however depending on the HD, data extraction may prove futile.
2. external USB enclosure, comes with USB cable....takes 3 mins to put internal HD into enclosure.
3. no,...... installing OS on a dying drive is beating a dead horse,...
4. because its dead/ dying.
5. no
6. Yes, they wont mess with your RAM.
Contact Apple for fix, of if you have the skills you can install a new HD yourself

Desktop does not show external Fire Wire Drive Buslink model MFW60

Running iMac fully maxed out. Have Buslink FireWire external drive, model MFW60 1394a. Purchased an adaoter plag in to connect through new Fire Wire port in back of machine. Got the drive to spin up and showed up on desktop. Tried to move a file from IMac to the Buslink and the whole system locked up. Only choice was to turn off everything . After rebooting, no Buslink showed up on the desktop. Disk utility sees it but each time I try to repair disk or even verify the disk utility is "not responding" and I am forced into" Force quit " to stop the disk utility rtask. I do have a Fire WIre USB 2 T backup external which is working fine.
Any ideas or help on getting the buslink to show up on desk top?

On the off chance, turn off Time Mschine, & add thst drive to silly Spotlight's Privacy pane.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

External HD not showing up in Shared Drive in Finder

I upgraded my Early-2011 MBP from Snow Leopard to Mountain Lion. Everything is fine except my Western Data external HD is no longer displayed under Shared Drives in Finder, nor is it found in Disk Utility. However, when I plug the HD directly into my MBP via USB, everything is fine: It appears in Shared Drive and is found Disk Utility. I'm really stumped because prior to upgrading to Mountain Lion, I made sure my drivers and firmware was up to date on my external HD as well as my Belkin N+ router. Just for a point of reference, I think it's a Mountain Lion issue because I have a white MacBook running Snow Leopard and it has no problems with the external HD. That's why I am holding off on upgrading it until I find out how to resolve this issue with my HD. I appreciate any input!
Thanks, friends!

Same problem here: Mac Pro that has a large external drive attached to it that I use as the Time Machine drive for our other Macs. All 2 Macs have been upgraded to ML. Everything worked fine back to thru all OS X versions, all the way back to Leopard. Only way I can get the sharing to work is to turn off sharing on the Mac Pro and then turn it back on. It stays available for a day or two and then no longer is accessible from the other Macs Finder or Time Machines. However iTunes home sharing and Apple TV can still get to the files on the Mac Pro.
Frustrating.....

Song plays in iTunes, but file does not show in Finder

Bizarre issue. My 26,000+ song iTunes Library lives on an external LaCie drive. All the songs play fine in iTunes (and I can hear the drive spin up when I go to play them). However, for a few thousand of the songs, the song's file is not in the physical location where iTunes shows it to be.
An example is below... these are two song file locations from the 'Master Tune Library.xml' exported from iTunes. Both of these files
show in iTunes, and they both play just fine from iTunes (no exclamation mark next to the song names). Yet only the first file (one ending in 1219.mp3)
is at that location. The one ending in 1249.mp3 does not show in that location, either via Finder, or via Terminal.
From Terminal I get no results from "find /Volumes/LaCie500 -name espace_20101103_1249.mp3" (without the dbl quotes) But if I run the same command for the 1219 file, it does find it in the expected location. Really stumped as from where iTunes is playing ...1249.mp3.
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1219.mp3
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1249.mp3
Mac Mini
Mac OS X 10.5.8
iTunes 10.5
iTunes Media folder location is /Volumes/LaCie500/myTunes Both options underneath for "organize" and "copy files ... when adding to Library" are checked.
Thanks!

Try using EasyFind utility to reveal the files.
Are you absolutely positive those files exist? You have verified with iTune's summary view thatthe files is what you think it is?
Show In Finder will usually not only open the directory but also leave the actual file highlighted.

Iphone 4s data will not work + does not show up when plugged into macbook.

I need to try to reset my iphone because it is not allowing me to use data on the phone even though my carrier had verified all the settings are correct and that I have unlimited data on my plan. Every time I try to access the internet on the phone without wifi connected I get an error message saying "could not activate cellular data network" or "you are not subscribed to a cellular data network."
However, when I plug my iphone 4s into my macbook pro it is recognized and shown in itunes, however I cannot download photos (iphoto shows an error message saying "no camera found") and the phone does not show up on my desktop or finder. I find alot of people have a problem with the iphone not showing up AT ALL, but mine works in itunes, just nowhere else on my computer.
I have tried to use icloud to back it up, but when I log onto icloud with my macbook to see what data is there and try to access my photos, only my contacts and a few other apps I dont need show up. No photos at all.

If there's an Apple store nearby make an appointment with the genius bar to have it checked. Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.

Superdrive does not show with the other devices on Macbook Air

My superdrive does not show with the other devices in Finder any longer.
Mid 2011 11" model
OS 10.7.5

So the applications is causing failures and ejects. Contact the software mfg. about resolution of this.
Have you tried the app TOAST? Very reliable and highly popular.
You can drag any disk to the trash to cause ejection

Copy does not show File 2 metadata in Nikon View NX

A picture opened in Photoshop CS4 11.0.1 and saved as a copy jpeg (after color correction) when opened in Nikon View NX 1.5.2 does not show the
metadata with shutter speed, lens aperture, etc. However, that same picture shows the original info in Photoshop (File info > camera data). I wrote Nikon and they claimed Photoshop and other third part apps "ruin the shooting data." Opinions? Suggestions? Thanks
Macbook Pro 2.16gHz OSX10.5.6 gRAID 2TB.

Well the problem is that, in Windows, the menu bar is owned by the application. When you view the PDF in the browser, the browser owns the menu bar and chooses what to show. Hence it shows only the browser items and not the Reader menus. If you view it outside the browser, Reader is running stand-alone and shows it's menu items.
I think, all you can do is show make sure the button bars you want are exposed by default.

Edu DVD in computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Thanks! For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine. It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do. The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
So, thanks anyway! Pretty cat!
Mona

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
Are the files lost forever or can i recover them by going to a shop or using a software?

Thank you for responding.
This might sound stupid since i'm not really knowledgeable with Macs,
but since all my files were moved from my mac computer to the external hard drive,
is it possible to recover those files through my Mac - like recovering deleted files?

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements? [tags]

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??

Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Nikon P7000 does not show up as a drive in Finder

Similar Messages

Maybe you are looking for