Nikon P7700 not listed in the camera profile directory

Why is the Nikon P7700 not listed in the camera profile dirctory of Lightroom 4.2, and not selectable in calibration menu?

Just to clarify again, what has already been stated. There IS a calibration profile for your camera. The name of that profile is Adobe Standard. The only profiles that display are profiles for the specific model that took the picture. Every camera that Adobe supports, even the digital SLR cameras, has an Adobe Standard profile. That is the "standard" profile that Adobe created for the camera. A camera will either be supported and have at least a profile with that name, or it will not be supported at all.
Asking when the other profiles will be provided is futile. I can only guess, but the answer will probably be, never. If you want to create additional profiles you can download the DNG Profile Creator and create your own. But I suspect you are getting all that you're going to get from Adobe. I have a Fuji camera, an older one, and I have three Adobe Standard profiles for it. Two of them are designated with numbers corresponding to older versions of ACR/Lightroom.

Similar Messages

Escam is not listed in the camera brands. Any ideas? Also..

Hello!
Im using 3 Escam QD520 IP cameras currently.
They are running fine on my windows 7 computer on iSpy and on Escam's included software.
The issue is, I cannot get them to show video on Adobe Flash Media Live Encoder.
The Escam brand is not listed under "Camera Brand" in the device>settings
Is there a similar brand I can select from Device Settings that would allow my cameras to show up?
Also how would i view all 3 cameras in AFMLE?
Ideally i am wanting to stream these cameras on a company's website. They assured me all i had to do was get my cameras to show up on AFMLE and they could do they rest (im guessing they have a host server already).
Thank you

iTunes forum here:
http://discussions.apple.com/category.jspa?categoryID=153

My Olympus E-620 and various lens do not appear in the camera profiles

Can the profile of my camera and various lens be added to the Lightroom profiles

Hi David,
It maybe that there are no profiles available for Olympus. I assume it’s an Olympus lens? I can’t see anything in LR5.6 using another raw file, although as you say many other manufacturers are listed.
You could try the tools at Adobe Labs either to download or create your own profile. Use the link below and scroll down to Adobe Lens Profile Creator or Adobe Lens Profile Downloader.
http://helpx.adobe.com/photoshop/digital-negative.html#resources

Where are the camera profiles? Not showing up in LR 4

The camera profiles are not visible in the camera calibration menu in the develop module of Lightroom 4. I installed them using the installer that came with the profiles. What folder are they supposed to be in so I can use them (Windows 7 x64)? Where is the documentation? Why isn't Adobe answering the phone?

Thanks for your quick reply! I have the 4.1 update installed. I have a Sony SLT A57. It is not inC\Program Files\Adobe\Adobe Photoshop Lightroom 4.1\Resources\CameraProfiles
The actual path there looks like:
C\Program Files\Adobe\Adobe Photoshop Lightroom 4.1\Resources\CameraProfiles\lens profiles\camera\adobe standard (empty)
However, I installed rc 4.2 after I wrote to you, and the path to the (Sony) camera profiles is now:C\Program Files\Adobe\Adobe Photoshop Lightroom 4.2 RC\Resources\CameraProfiles\Adobe Standard. There is another folder named Camera, under Camera Profiles, in which are Canon, Nikon, and other camera folders - with several different profile choices within each folder. In this other "Camera" folder there are some Sony cameras with different profile choices for each camera in the folder, ie portrait, landscape, vivid, standard. Can I try one of those, or does the program automatically go to my camera model? Are they planning to add these other profile choices for my Sony SLT a57?
The one profile listed in the development menu is "embedded". What is that?
Thanks, Joanne

Camera Raw RC 8.6 does not automatically locate the lens profile for the new Canon 16-35mm f4 lens. The profile is in RC 8.6

I have loaded Camera Raw RC 8.6. It can not automatically locate the new Canon 16-35mm f4 lens, although the lens profile can be manually found.

Hi
I forgot to answer one question.
When I have a file from the Canon 16-35mm f4 lens in Camera Raw and go to
Lens Correction and check the box Enable Lens Profile Corrections, when I
select the model in the first box as Canon, it picks the wrong 16-35mm lens.
It picks the f2.8. I hope that you can get this fixed in Raw 8.6. It is
a major headache for the user of this new lens.
In a message dated 7/28/2014 3:10:44 P.M. Central Daylight Time,
[email protected] writes:
Camera Raw RC 8.6 does not automatically locate the lens profile for the
new Canon 16-35mm f4 lens. The profile is in RC 8.6
created by ccastleb (https://forums.adobe.com/people/ccastleb) in Adobe
Camera Raw - View the full discussion
(https://forums.adobe.com/message/6591754#6591754)

Lenses not listed in the Lens Optimizer in Digital Photo Professional

As the topic title states my lenses are not listed in the Digital Lens Optimizer. I've placed the CD in the tray, and yet the program says it's connecting to the server, and when done, they are not found in the list. The lenses are:
EF-S 18-55mm f/3.5-5.6 IS II
EF-S 55-250mm f/4-5.6 IS II
Why are they not listed? How do I get them?
DPP version 3.13.0.1
EOS 70D / EOS Rebel t4i / EF-S 18-55mm f3.5-5.6 IS II / EF-S 55-250mm f4-5.6 IS II / Sigma 17-50 f2.8/ Canon EF-S 60mm f2.8 macro/ Canon EF 100mm f2.8 macro/ Tamron 70-300mm / 430EX II Speedlite / Canon FS 300
Canon Pixma MG 3100 / Canon LiDE 2100
Adobe Lightroom 4, Canon DPP, Corel Paintshop Pro X4

Of the lenses I have, the following are not supported by DPP 4 (However, they are supported "in camera" with EOS Utility 3)
Canon EF 50mm f/1.8 II USM
Canon EF 20-35mm f/3.5-4.5 USM
Canon EF 24-85mm f/3.5-4.5 USM
Canon EF 28-90mm f/4-5.6 USM
Canon EF 28-105mm f/3.5-4.5 II USM
Canon EF 28-135mm f/3.5-5.6 IS USM
Canon EF 75-300mm f4.5-5.6 USM
I don't care if they are "old" lenses or not. Why have the correction profiles for "in camera" correction (when saving/converting to JPG) and not in DPP 4? They have the data, they could just port it over from the database used in EOS Utility 3.
These lens correction profiles bring new life to some of the old "film" lenses like the Canon EF 20-35mm f/3.5-4.5 USM lens. That lens has lots of distortion. However with in camera correction, it now produces good pictures.
I am not a professional photographer. I am a photography enthuisasts. I'll NEVER spend $1,000.00 or more for an "L" series lens (in fact I sold the Canon 24-105 f/4 L "kit lens that came with my EOS 5D. It was way too heavy, and the zoom on the low end was cramped (only 4mm movement between 24mm and 28mm). I like/use my Canon EF 28-105mm f/3.5-4.5 II USM and Canon EF 28-135mm f/3.5-5.6 IS USM better.
Maybe my mistake is that I am using a program call Digital Photo Professional and I am not a professional. I noticed that that software leans heavily and supports the "L" series lenses.

How can i add the Sigma 10mm 2.8 Fisheye lens profile from the camera profile in windows to lightroom 5?

It only seems to give me a 15mm fisheye option for Sigma and not the 10mm even though it is a profile in the camera profiles folder.
Can anyone help with importing this profile into Lightroom?

nickpearse wrote:
Just so it is black and white for my sake. I am shooting with a Nikon D7100 using a Sigma Fisheye 10mm 2.8 and using the Lens Profile of the Sigma 15mm 2.8mm on Lightroom.
Then the correct profile to use is the Sigma 10mm F2.8 if you want proper Vignetting correction and matching Distortion correction, but you'll need to shoot camera raw images (i.e. no JPEG lens profile). This is also why you are only seeing partial correction. As I said, "With a crop factor camera only the central crop area of the full-frame Sigma 15mm lens profile will be applied."
That said there is absolutely nothing wrong with using the Sigma 15mm lens profile with your crop factor Nikon D7100 if you are happy with the partial correction results, but you can also do this using the correct Sigma 10mm lens profile (set less than 100). There is a fisheye correction plugin called Fisheye-Hemi that works very similar in that it only applies partial correction. You're getting about the same results as Fisheye-Hemi for free using partial correction with the LR lens profile tool. That should make you happy! I suggest experimenting with both the 15mm and 10mm lens profiles and start shooting camera raw image files. Your're not realizing the camera's full capability shooting JPEGs!
In the DSC_7098 images posted none of them look very sharp (slow shutter speed?). Other than geometric correction I can't judge the posted images for "sharpness" in the corrected areas, which is the major concern. The biggest issue with rectilinear correction of fisheye images is loss of detail in areas with the most correction (edges and corners). If that were not the case people would use fisheye lenses for ALL wide-angle images and simply correct them inside LR. Sadly that's not the case and using LR's Lens Profile Distortion and other transform tools to correct fisheye images considerably softens the corrected areas (sides and corners).
Fisheye geometric distortion with some subjects is almost undetectable. So how much correction you need will vary by subject type and what the end use for the image. Any fisheye image that has correction applied will lose sharpness in the corrected areas, which may be fine for most purposes other than large prints.So it's best not to strive for 100% rectilinear correction–Just the correction needed to make the image look better.
Canon 8-15mm F4L FE on 5D MKII Full-Frame @ 15mm (No correction)
Looks good to me with no correction!
For more flexibility and better results PS's Wide Angle Adaptive filter and content aware fill tools will retain more image detail in the corrected areas. Here's the same lens and camera with an image processed in PS:
15mm Full-Frame Fisheye
LR Distortion = 50 (partial) PS Adaptive Wide Angle Filter + Content Aware Fill
The corner image detail is about the same in both of the above images at 1:1 view. Partial LR Distortion correction is good!
So what happens if I apply 100 Distortion correction to the image inside LR?
1:1 Compare View (lower-left) with LR Distortion = 100
100% LR Distortion correction of fisheye images is NOT good IMHO!

Illustrator CS6 is not listed in the Programs panel.

Hi, my Illustrator CS6 is not listed in the Programs panel in the Extensions Manager. How do I restore it?
A bit of history:
I had been using ScriptBay with Illustrator CS6 before, without problems. After my someone came and resolve some of my computer's network permissions issues, I discovered that ScriptBay panel has stopped working normally.
However, the script still works fine in Indesign CS6
I tried deleting some preferences, but scriptBay refused to work in Illustrator. Then, I copied a colleague's Illustrator CS6 to test on my machine (without deleting my copy). And now, my extension manager does not list Illustrator ib the panels.
Can anyone help with these 2 issues? I wanted the ScriptBay to work so badly!!
Thanks!
Elle

Thanks for your sugegstion. Gonna repost this in another forum. I have found the solution to the "missing program": https://forums.adobe.com/message/4622944
I can't do a clean install; it's not my personal computer. Hopefully I'll get a solution in the AI community!
Thanks!

Best way to create a conact list from the user profile properties

We have a customer looking for a phone book utility, starting with a table showing main user information and with some search options. We would like o base it on the user profile properties and not to create an indipendent studion record browser porlet.
What is best way to create a conact list from the user profile properties ?

I did something like this using search. It can get messy, so you need to take care with it.
* Identify the properties you want to make accessible to search (ex: name, etc.)
- add them to the user property map
- flag them as searchable
* I broke down and used the native server API. I'd still suggest this approach.
* Write some simple code to do vcard export if you like
(my code is all in vb.net)
I really believe this is the "right" approach, but honestly, this was a bit painful and has been
messy for us given some other business issues. (to my chagrin we have users with 2-letter last
names...)
I have code you're welcome to poke at, but it's more or less slapped together and has various
different search methods commented out so you can see how I tinkered w/ the remote vs. server
API.
If you'd like it mail me at [email protected] and I'll send you a zipped copy w/ a
readme. I hope it may be useful to you as both a starting reference.

Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Also, the movie files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
 Cheers, Tom

Media Encoder CC not listed in the list of app in CC

I'm running Windows 7 Ultimate and I am a Adobe Creative Cloud for Teams member. I'm trying to install the new version of Media Encoder, but when i open Creative Cloud app it is not listed in the long list of apps. I have CS6 and CC installed on my computer.
Can you offer some suggestion how i can download and install this program?
I am trying to convert a mov file to webm and i am hoping Media Encoder CC can do that since I did not see a webM choice in media encoder cs6.
Thanks.

Brenadan Bolles (fnordware) has recently posted some beta versions of WebM exporters for Adobe Media Encoder. Details are here:
http://forums.adobe.com/message/5463405#5463405

Where is the photo tab on itunes? My device is not listed on the left side of my screen and there is no photos tab on the right of my screen. I want to delete photo albums that were synced through itunes to my ipad 3.

I synced several photo albums to my iPad 3 from my computer through iTunes. Now, I would like to remove them and have discovered that they cannot be removed except through using iTunes. Instructions that I've read say that once the device is connected to and selected from the list in iTunes, select the Photo Tab and then the folder that contains the photos etc. I never get that far because I do not have a Photo Tab to select in iTunes. How do I find this illusive tab so that I can delete these albums that are merely duplications of other pictures and are just occupying space. I need to get rid of them. Can anyone help me find the photo tab. I cannot move past that step until I do. Also, my device is not listed on the left side as stated in the instructions. It's in the bar on the upper right area of my screen and is automatically selected when connected. I am using the current version 11.1 for iTunes and IOS 7 on my iPad 3, if that helps.

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

New Hard disk is not appearing in the System Profiler

I am doing a fresh install using my ligitimate Snow Leopard DVD on my USB disk.
My SSD is not appearing in the System Profiler under Hardware>ATA
or under Hardware>Serial-ATA
It is a PATA device as was the original disk I've replaced.
So I have NO disk to install onto.
Any ideas what the problem could be?
===
History
My hard disk died, and I am replacing it with an SSD.
I bought a Mach Xtreme Technology Pata 1.8" SSD (Part no MXSSD1MNANOZ-120G)
(I can send this back if I have to)
The SSD is unusual in that it has to be a 1.8" size with a ZIF PATA connector.
The SSD is preformatted (but not necessarily to Apple formatting).
With the SSD the same way around to the original 80GB HDD, Pin 1 of the new SSD is towards the back of the computer.
I cannot find any information as to which Pin on the original HDD is Pin 1.
I used this tutorial to dismantle and reassemble: http://www.youtube.com/watch?v=PnV7mHS7Qi8
I've double checked the connections inside.

Thanks, this was the answer.
The connector on the SSD I used was indeed arranged reverse to the original Apple Drive. So it looked different to all the tutorials.
I knew where Pin 1 was on the new SSD but could not see it on the old drive.
The original 80GB hard disk had Pin 1 is towards the middle of the computer.
Flipping the SSD over meant it was about 3mm closer to the back, which made the zif ribbon buckle. So I had to cut away some of the rubber shock absorber to the back, and use tape. The SSD should not need the shock absorber as it is not mechanical/vibrating.
It is now working well.
(Although I now have a different problem restoring from the Time Machine. )

My country is not listed in the Mac app store and iTunes?

My country is not listed in the Mac app store or iTunes. and yes ive tried putting in false information like 'I live in the USA, NY' but whenever i try buying something it says "Your credit card information does not match your banks records, Please enter a US billing card.. and such. Because of this i have no choice but to use what you call 'pirated' applications. Any help fellow mac users?

Sorry, but it's Apple's policy...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
The Complete Guide to Using the iTunes Store | iLounge Article

HT1539 I recently downloaded my digital copy of titanic and from the itunes extras screen I push play and nothing happens. The movie is not listed, only the itunes extra is listed in the list. How do I repair?

I recently downloaded my digital copy of titanic and from the itunes extras screen I push play and nothing happens. The movie is not listed, only the itunes extra is listed in the list. How do I repair?

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

Nikon P7700 not listed in the camera profile directory

Similar Messages

Maybe you are looking for