NIKON USERS: check your pixels !

unbelievable for how long a major bug in aperture and os x was undiscovered: os x, iPhoto AND APERTURE handle nikon raw files with the WRONG pixel dimensions! (big thanks to quentinh for his discovery!)
if you're a NIKON user and you shoot in RAW (nef), read this thread:
http://discussions.apple.com/thread.jspa?messageID=2817900#2817900
while the topic of quentinh's thread is nikon D70, it applies to other nikon cameras as well. if you discover the same, please make sure you fill-out a bug-report: http://www.apple.com/feedback/aperture.html
in the unlikely event that you know how to fix this issue, PLEASE let us all know.

GOOD NEWS
i have done some testing with photos of grids etc.
Aperture indeed shows MORE PIXELS then photoshop! the image is NOT stretched (sorry for assuming this before hand), aperture actually shows ADDITIONAL pixels left and right that are cut by photoshop's raw converter. exported versions to psd as well as versions "open in external editor" have shown parts of my test-grid which were not visible/cropped if the nef file was opened through the adobe raw converter! to complete the entire story: the height is cropped by 1 pixel both sides in aperture, this however doesn't bother me.
FACT IS aperture does find more effective pixels in nikon d70s files. this means that the pixel definition (camera specs) from nikon is not accurate. both nikon capture and photoshop's raw converter however use nikons specs and crop the (obviously available additional pixels) while aperture (and iphoto) read whats truly in the file.
WOW. i didn't expect this outcome, i trusted nikons camera specs, however in my test APERTURE DID IT RIGHT, nikon capture and photoshop didn't.

Similar Messages

I am receiving the 'Could not sign you in [Access denied: 530]. Check your user name and password' problem on Adobe Muse CC 2014 and I cannot access the xml file that is supposed to fix this issue?

I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
Can someone direct me to a working page with this file or provide a different solution? Thank you!

Hello,
As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
I would suggest you to contact Godaddy to either reset password or reset the permissions.
Regards
Vivek

No active writeable datasource found for user creation, check your Persiste

HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay Patel

Dear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.

"Failed to connect backend system.Check your system definition and user pri

Hi Experts,
I am a BW Consultant working on Portal & Visual Composer (7.0)
As a Developer i got SAP_ALL & SAP_J2EE_ADMIN roles in BW and System Admin and VC role in Portal.
In Portal Created/Published iviews for BW Queries (Transaction) and Published them to a role (role1) in portal.
In Visual Composer i developed Dashboard reports on BW Queries ,made them public and deployed them to a portal role(role 1) in portal.
I assigned portal role to my self and tested the queries and dashboards in portal everything is working perfectly.
In VC i can see 3 different systems defined in Portal
I created a Test user (with profile of end user) in BW,Testuser is authorised to view all the reports in BW and All data in all data targets and in portal testuser is assigned with Role1 and VC Role.
(Note: In BW Testuser doesn't had J2EE_ADMIN role).
Portal:
When i login to portal as testuser and tries to execute the BW Queries (Transaction) and it working perfectly.
When i tried to execute Dashboard reports developed in Visual Composer it gives me an error
"Failed to connect backend system.Check your system definition and user priviliges"
In Visual Composer i logged in as testuser (as test user got VC role assigned) i can't see any list of avaliable systems under "Find Data"
When i modified testuser profile in BW and updated with SAP_J2EE_ADMIN then i can execute the dashboard report but at the same time testuser got more than what he should have like user admin,system admin...etc
I searched the sdn and find some similar threads ...but nothing was useful
Please update me what went wrong and how to fix this...
Thanks in advance

Hi,
Refer,
Visual composer
Failed to connect to backend system. Check your system definition and user
Regards,
P.Manivannan.

Sending of message failed. Unable to open the temporary file C:\Users\Admin\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting.

after opening an email I knew to be a phishing attempt, I forwarded it to my bank's spam/phishing email address. I did NOT click any link in the suspicious email. only forwarded it.
now when I try to send an email I get the following error message:
Sending of message failed.
Unable to open the temporary file C:\Users\Admin\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting.
I can't find a temp directory. where is this and how do I fix it?

Try to start *Windows* in safe mode with networking enabled.
- Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
- Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still in Windows safe mode, start Thunderbird in safe mode.
- https://support.mozilla.org/en-US/kb/safe-mode
Does the problem go away?

Is there any way to disable "Checking Your Add-ons" window that comes when user starts Firefox after update for the first time?

we have over 1500 firefox users and its very confusing to them if after update they start their Firefox and this "Checking Your Add-ons" window comes.
It would be much appreciated if it can somehow skipped this or do it silently.

Unfortunately this link does not help.
We currently have 3.6.x versions of Firefox in most computers, and if i do a silent install via sccm to version 12, then if user starts the new firefox for the first time, it checks addons, like java quick starter and browsing protection (f-secure) etc. Second time when they start firefox, it starts normally.
My question is - is there some way to avoid this first run addon compability checking?
I've tried numerous preferences in mozilla.cfg, nothing helps so far.

When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Oct 10, 2011 2:13 PM I downoland game Zombi Farma for free but I paid 239 dkk.     Here is answer from The Play Forge:        Hi Anna, first of all, please check your receipt again, if you've purchased anything else during the period it might appear as

Oct 10, 2011 2:13 PM
I downoland game Zombi Farma for free but I paid 239 dkk.
Here is answer from The Play Forge:
Hi Anna,
first of all, please check your receipt again,
if you've purchased anything else during the period it might appear as if it's related to Zombie Farm (Apples receipts are a bit hard to read to be honest.)
If this is indeed not the case and you have indeed not purchased anything from us, yet have been charged 239 DKK, there's obviously a big issue.
However, we're not in charge of the money handled in purchases, as Apple has chosen to be the only one controlling this.
As such you'll have to contact Apples support to get help with refunds.
You'll find it at http://www.apple.com/support/itunes/
We're sorry for any inconvenience this has caused you. :/
Ana here is receipt from my email:
Billed To:
                                   [email protected]
                                                   Anna Szczawinska
             Arildsgard30 , sttv
                                       2700 Bronshoj
                      DNK
Order Number: M2M4K45SK5
           Receipt Date:           10/10/11
           Order Total: 239.00Kr
           Billed To: MasterCard .... 9754
Item
Artist
Type
Unit Price
                                            Zombie Farm, 50 Brains, Developer: The Playforge, LLC
                                                                                                                      Report a Problem
                                           The Playforge, LLC
                                           In App Purchase
239.00Kr
Order Total:
239.00Kr
                                                                    Please retain for your records
              Please See Below For Terms And Conditions Pertaining To This Order.
              iTunes Store
              You can find the iTunes Store Terms of Sale and Sales Policies by launching your iTunes application and clicking on Terms of Sale or Sales Policies
                            Answers to frequently asked questions regarding the iTunes Store can be found at http://www.apple.com/uk/support/itunes/store/

The Zombie Farms game is free but "in App" purchases during game play are not. You are being charged for the purchase of "50 brains" not for the game itself.
Note that if you purchased this game after entering your password, etc. there may be a period of time where someone can play the game and make purchases without needing to re-enter the password.
Did you give your iPod to your children to play this game?
Also, this is a user-to-user technical help forum you aren't speaking to Apple or Play Forge here. We are all just users like you here and can't issue any refunds.

Word 2008 A file error has occurred. Check your network connections . . .

Word 2008 12.1.2 throws an error dialog when trying to save a docx file:
"A file error has occurred. Check your network connections or make sure the disc is properly inserted and not defective (nameoffile.docx)"
Newsgroups recommend to trash the Normal.dotm and let Word re-create that template but that doesn't solve the problem.
Newgroups also recommend specifying the file location of User Templates. That's doesn't help either.
A new file, however, does not appear to be a problem after following these suggestions. So there may be something wrong with my file.
I suspect it has something to do with the gutter and mirror margins because when these features are manipulated, Word 2008 inserts an extra "section next page" that I am not happy with, and the page numbering and sometimes section numbering gets thrown off.
Actually, I don't care WHY it's happening. I just want to know HOW to avoid this error. I cannot save changes to an important docx file anymore.
My work around: "Save as" to doc format and continue working!
However, I would prefer to keep working in docx format because Word bloats doc files incessantly, but docx seems to keep file size in check.

that was only a temporary fix. It didn't work well for long. Back to problems with both doc and docx versions of the same file.
Are there any other general swathes I can make, e.g. repair permissions (been there, done that)? I have trashed Normal.dotm, the 2008 preference files and repaired permissions.
docx files throw the error dialog, doc files crash Word on a regular basis.
Any more ideas?

Not receiving email? Check your modem/router!!!

Hi all. My Logoc board fried last week and server/mail server was offline for that time. Everything worked up to that point. When I got the server back from the genious bar with a new logic board mail and web refused to work. I could send email and surf the web but could not receive email or visit my website from outside my subnet. After 3 three days of checking and tweaking everything from D.N.S> to mail settings, firewall settings I decided to check my Modem. It is a 2wire 2701HGB. What I saw astounded me. All the firewall settings That had allowed the incoming connections no longer had the public I.P. back to my server. It had deleted it, on its own. So if you have has a similar problem check your modem. It could save you a lot of grief. Everything works just like it used to now.
Best,
emackiii

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
If you aren't receiving the email to your rescue email account (and you've checked the spam folder on the account as well as the inbox, and tried clicking the reset link again) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699

Can't Connect, can't complete the call. Check your...

Greetings guys,
My phone was PERFECT until I updated to Lumia Black, since then I get the error:
Can't Connect
Can't complete the call. Check your cellular signal and the number, and try again.
at random times; this is specially bad when driving and wanting to make a quick call via voice command; it's just not possible.
This is the list of things I've done to try and fix it without luck.
Resetted the phone
Upgraded to pre-8.1 alpha
Upgraded to 8.1 alpha
I can also confirm that when trying to call via voice with Cortana (and until I toggle flight Airplane mode) it gives me the same error message.
I want to add that I am not the only one, I've heard from two lumia 920 users and one lumia 820 issue and have the screenshots they sent me in case it's of any help (i've attached mine - obscured)...
Does anyone have any recommendations or ideas?
Thanks tons,
Geo
Solved!
Go to Solution.
Attachments:
wp_ss_20140503_0001.jpg ‏76 KB

Sadly i stilll have the issue. As you mentioned gtejeda, it is way better now, but is still there speccially when you more need a quick call. I have updated my phone to the latest release, but still hoping poeple to see this and realize that it is not 100%. They are on the right track, but need to keep working on it.
Attachments:
wp_ss_20140609_0001.png ‏131 KB

SPL document screening. Outcome of system/user checks

Could anyone explain the differece in the following four "outcome of system/user checks:
       SPL Check: OK (No SPL Entries Found)
1      SPL Check: Not OK (SPL Entries Found)
6      Status Check: OK (Not Blocked)
7      Status Check: Not OK (Blocked)
Thanks.

Hi Aditya,
The answers to your questions could depend on several factors, including how the initial screening of partners was performed and whether or not the SPL services blocks incoming documents or not. The 'SPL Check" may be from using the simulation feature or it may be due to a lack of initial screening of a business partner. As you can see there are plenty of variables involved.
So the best answer I can provide is the following:
Go to 'help.sap.com' (leave off www).SAP Business Objects tab.
Select GRC solutions.
Select Global Trade Services.
Choose appropriate version, then select 'Application Help' in the desired language.
Use the search feature at top or the menu section at left to look up these processes and statuses.
This should help you some at least until someone else could perhaps provice a more specific answer to you here.
Cheers !
-Greg

Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

The javescript in below link works for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
However, I'd like to set default user for people picker only when user checks a checkbox.
I am new to development. Could you please help me on this requirement ?
Thank you very much.

Hello,
Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Cannot connect to abap server, please check your abap server connection

Installed new NW BPC 7.5 system on windows 2008 server but get the error as follows
when logon to BPC server:
"Cannot connect to abap server, please check your abap server connection".
"define system user group tab" is inactive in server manager also.
Server Diagnostic errors for SAP Server Connection:
Database Connection
Status Connection Error
as per note 1385864 but this note has not helped get past this status with installation.
User Type value is either set to Communication Data for all three users (BPC_ADMIN, BPC_SYSADMIN, BPC_USER).
and these accounts are not locked.
Any ideas for these errors?
Regards,
Aidan

Hi Aidan,
"Your logon id (domain\user) does not have SystemAdmin rights; some functionality
is disabled."
This is caused by the fact that the user you are logged in as isn't in the UJA_SVR_DEFAULT table, the SYSADMIN field needs to have a value that contains your user id (i.e. DOMAIN\USER) . You can set this up with the UJA3_WRITE_SYS_USERS program.
"When I try to install APPshell the following errors occur:
@8O@ UJA_DATA_CHECK E 006 Application PLANNING's multiprovider /CPMB/ATMKOOE not exist in BW
@8O@ UJS_EXCEPTION E 003 Errors occured during "after import" method call during activation"
Aidan, sounds like something went terribly wrong during your activation process. Do this, Clean the appset with the UJS_ACTIVATE_CONTENT program and make sure that everything is completely deleted. Make sure that there is a lot of memory available for the activation and try it again.
It should work.
Hopefully this helps you.
Cheers, Scott

Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID:        49
INFO:iMPACT - Vendor ID:             01
INFO:iMPACT - Device Code:           18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time =    814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank you

Hi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the  same configuration problem, I want to consult  you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.

NIKON USERS: check your pixels !

Similar Messages

Maybe you are looking for