NILM.EXE Application failed to initialise properly 0xc0000142

Hi,
I have recently had to reload windows (xp pro 2003 sp 3) onto my laptop and eventually got round to reinstalling labview 6.1. during the install, i get the repeated message "nilm.exe - the appication failed to initialise properly 0xc0000142" after which the system grinds to a halt under the weight of many many copies of nilm.exe failing to initialise in the same way...
I had a look around and discovered that the solution might be to disable this
http://digital.ni.com/public.nsf/allkb/8355753BD0C8E62F8625768C005B359B
.. which i did.. but unfortuanely it didnt seem to work...
does anyone have any ideas?
Thanks,
Mark

Hi Mark,
Did you receive any errors during the installation of LV 6.1 during installation? If so please take a look at the 6.1 ReadMe.txt which offers some registry keys you can comment out that may resolve the problem. If this doesn't help then what's different to this installation versus the one that worked previously, was that under XP SP3 as well? I'd re-check that you install 6.1 with the virus guard turned off, and that the virus guard allows exceptions i.e. nilm.exe on your system as it may be a security related issue preventing NILM.exe from starting.
Kind Regards,
Applications Engineer

Similar Messages

Opmn.exe the application failed to initialize properly

hi,
i have installed SOA for OBIEE on windows 2008 server. i am able to start the SOA without any issues but when i am logging off my windows machine i am getting this error and the SOA suite is getting shutdown
opmn.exe the application failed to initialize properly (0xc0000142). click ok to terminate the application
can anyone help me in this regard
regards,
chandrasekhar.

plese find the opmn.log file
11/05/25 10:46:35 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (21:0)
11/05/25 10:46:35 [pm-process] Starting Process: default_group~home~default_group~1 (22:0)
11/05/25 10:46:38 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (21:4088)
11/05/25 10:46:47 [pm-process] Process Alive: default_group~home~default_group~1 (22:7324)
11/05/25 10:46:47 [pm-requests] Request 5 Completed. Command: /start
11/05/25 10:52:23 [ons-internal] ONS server initiated
11/05/25 10:52:23 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
11/05/25 10:52:23 [pm-internal] OPMN server ready. Request handling enabled.
11/05/25 10:52:23 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (23:0)
11/05/25 10:52:25 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (23:9100)
11/05/25 10:52:29 [pm-requests] Request 5 Started. Command: /start
11/05/25 10:52:29 [pm-process] Starting Process: default_group~home~default_group~1 (24:0)
11/05/25 10:52:42 [pm-process] Process Alive: default_group~home~default_group~1 (24:3904)
11/05/25 10:52:42 [pm-requests] Request 5 Completed. Command: /start
11/05/25 10:53:56 [ons-internal] ONS server initiated
11/05/25 10:53:56 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
11/05/25 10:53:56 [pm-internal] OPMN server ready. Request handling enabled.
11/05/25 10:53:56 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (25:0)
11/05/25 10:53:58 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (25:8400)
11/05/25 10:54:02 [pm-requests] Request 5 Started. Command: /start
11/05/25 10:54:02 [pm-process] Starting Process: default_group~home~default_group~1 (26:0)
11/05/25 10:54:14 [pm-process] Process Alive: default_group~home~default_group~1 (26:6552)
11/05/25 10:54:14 [pm-requests] Request 5 Completed. Command: /start
11/05/25 12:56:51 [pm-requests] Request 2e Started. Command: /stop
11/05/25 12:56:51 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (25:8400)
11/05/25 12:56:51 [pm-process] Stopping Process: default_group~home~default_group~1 (26:6552)
11/05/25 12:57:17 [pm-process] Process Stopped: HTTP_Server~HTTP_Server~HTTP_Server~1 (25:8400)
11/05/25 12:58:53 [pm-requests] Request 2e Completed. Command: /stop
11/05/25 12:58:53 [pm-process] Stopping Process: default_group~home~default_group~1 (26:6552)
11/05/25 12:58:53 [libopmnoc4j] Forcefully Terminating Process: default_group~home~default_group~1 (26:6552)
11/05/25 12:58:55 [pm-process] Process Stopped: default_group~home~default_group~1 (26:6552)
11/05/25 12:58:58 [pm-requests] Request a2 Started. Command: /stop
11/05/25 12:58:58 [pm-requests] Request a2 Completed. Command: /stop
11/05/25 12:58:58 [pm-internal] OPMN server stopped. Request handling disabled.
11/05/25 12:58:58 [pm-requests] Request a3 Started. Command: /shutdown
11/05/25 12:58:58 [pm-requests] Request a3 Completed. Command: /shutdown
11/05/25 12:58:58 [pm-scheduler] Pm/Ons confirm notification timeout
11/05/25 12:58:59 [internal] Logging disabled
11/05/25 12:59:45 [ons-internal] ONS server initiated
11/05/25 12:59:45 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
11/05/25 12:59:45 [pm-internal] OPMN server ready. Request handling enabled.
11/05/25 12:59:51 [pm-requests] Request 5 Started. Command: /start
11/05/25 12:59:51 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (27:0)
11/05/25 12:59:51 [pm-process] Starting Process: default_group~home~default_group~1 (28:0)
11/05/25 12:59:55 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (27:8364)
11/05/25 13:00:04 [pm-process] Process Alive: default_group~home~default_group~1 (28:3396)
11/05/25 13:00:04 [pm-requests] Request 5 Completed. Command: /start
11/05/25 13:01:16 [ons-internal] ONS server initiated
11/05/25 13:01:16 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
11/05/25 13:01:16 [pm-internal] OPMN server ready. Request handling enabled.
11/05/25 13:01:16 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (29:0)
11/05/25 13:01:19 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (29:3740)
11/05/25 13:01:22 [pm-requests] Request 5 Started. Command: /start
11/05/25 13:01:22 [pm-process] Starting Process: default_group~home~default_group~1 (30:0)
11/05/25 13:01:32 [pm-process] Process Alive: default_group~home~default_group~1 (30:8892)
11/05/25 13:01:32 [pm-requests] Request 5 Completed. Command: /start
11/05/25 16:11:38 [pm-requests] Request 3c Started. Command: /start
11/05/25 16:11:38 [pm-requests] Request 3c Completed. Command: /start
11/05/25 16:17:52 [ons-internal] ONS server initiated
11/05/25 16:17:52 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
11/05/25 16:17:52 [pm-internal] OPMN server ready. Request handling enabled.
11/05/25 16:17:53 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (31:0)
11/05/25 16:17:55 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (31:5032)
11/05/25 16:17:59 [pm-requests] Request 5 Started. Command: /start
11/05/25 16:17:59 [pm-process] Starting Process: default_group~home~default_group~1 (32:0)
11/05/25 16:18:10 [pm-process] Process Alive: default_group~home~default_group~1 (32:2424)
11/05/25 16:18:10 [pm-requests] Request 5 Completed. Command: /start
i have some files in the c:\windows\temp folder

Do I need "nilm.exe" file for labview to run properly?

I have some problems with the "nilm.exe". Sometime it create a lot of other file in Windows tak manager and it lock completely my computer. Do I need "nilm.exe" file for labview to run properly? Can I remove it from my computer ?
thanks in advance for your reply

NILM.EXE is the NI License Manager for Remote Panels. If not using Remote Panels then you do not need to use NILM.EXE. The following webpage shows how to disable nilm.exe:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/581a81c57ac0c10b86256b5a005f2975?OpenDocument
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

During Palm reinstallation, when reboots get errors, "The application failed to initialize properly (0xc0000142)" and "DeviceMonitor MFC Application has stopped working."

I'm trying to reinstall the Palm software because synchronization has been failing for the past two months. It get to the point of synchronizing the calendar and fails with the message that there are too many events. Hence, nothing in the process after that synchronizes. I've tried reinstalling the Palm s/w to no avail. Now I'm trying to uninstall and reinstall the Palm s/w only to be greeted with another error message when the system restarts (as part of the installation process). The error is, "The application failed to initialize properly (0xc0000142). Click OK to terminate the application." When I choose OK, I get the error, "DeviceMonitor MFC Application has stopped working." Windows does not notify me of a solution. Any ideas/solutions would be greatly appreciated!
Thanks,
Gina
Post relates to: Tungsten E2

Hello and thank you for using the Palm Help Forums!
You may need to do a clean uninstall of the Palm desktop software to resolve your issue.
Uninstall Palm Desktop by going to your Control Panel > Add/ Remove Programs > Remove Palm and/ or PalmOne
Delete the following folders:
C:\Palm
C:\Program Files\Palm
C:\Program Files\PalmOne
C:\Program Files\Handspring
From the Windows start menu, select Run.
Type Regedit and click Run or OK
*NOTE* BE VERY CAREFUL IN YOUR REGISTRY KEY EDITOR. IF THE WRONG THING IS DELETED THIS CAN CAUSE SERIOUS DAMAGE TO YOUR COMPUTER'S OPERATING SYSTEM.
Delete the following keys:
HKEY_Current_User\Software\PalmDesktopAutorun
HKEY_Current_User\Software\Palm
HKEY_Current_User\Software\Palmone
HKEY_Current_User\Software\U.S Robotics-- (check and make sure only palm related keys are under this one)
Delete this key as well:
HKEY_Local_Machine\Software\PalmSource
Close the Registry window
Restart PC upgrade to new palm desktop (by going to www.palm.com).
Post relates to: Treo 800w (Sprint)
Post relates to: Treo 800w (Sprint)

The application failed to initialize properly 0xc0000142.

I installed Labview and TestStand 2012 SP1 on my computer. At the beginning it seemed everything was good, but after a couple of hours I tried to launch another application from TestStand and I got this message: The application failed to initialize properly 0xc0000142.
Now each time that I want to launch TestStand the message come up.
How can I fix this issue?
My OS is Windows XP
I uninstall and reinstall everything many times.

Grey88 -
1) What TestStand application are you running when you get this failure; sequence editor or a user interface?
1a) If a LabVIEW user interface, what version of LabVIEW are you using?
1b) If the sequence editor, does any portion of the UI show before the error occurs?
1c) Do other applications from TestStand work OK?
2) Just wanted to explicitly confirm that you rebooted the system after changing the ini file to test the issue?
3) For the boot.ini change, does the problem still occur if you change the value to 2048 (2GB)? I suggest to try this because applications that are not Large Address Aware (LAA) in general should not be using more than 2GB of memory. The sequence editor does not support LAA until TestStand 2013 so the OS should restrict it from accessing > 2GB. On the other hand LabVIEW started enabling LAA on its executables in an earlier version.
Scott Richardson
National Instruments

LabVIEW application fails to run properly at Windows startup

I have experienced problems with my Labview application after putting it in the Windows XP startup folder. The application runs perfectly if I start it manually but whenever I get Windows XP to start it after boot-up, I see various error messages. My application uses calls to the NIMotion library and it's these calls that are generating the error messages. I don't always get the same errors and the problem has occurred with two different programs on two different computers. I think it is something to do with NI services for the motion controller that load at startup and haven't yet been started before my application runs. I have configured Windows to login automatically and I have noticed thay my program executes quite early, sometimes even before the desktop icons appear.
I have seen that a number of other users have experienced similar problems. There was a recent post titled "Waiting for Windows Idle" in the LabWindoesCVI forum that is related. The only solution that I have come across is to wait at the very start of the program until the rest of the dependent services have loaded. I have added a 30 second wait to my programs and this appears to have largely solved the problem. This is no the best solution because it is not always guaranteed to work. I have had a situation recently where Windows was installing an automatic update and the bootup process was slower than normal. This caused my program to fall over again. I don't wan't to extend this time too much or the user will be waiting every time the machine is turned on.
Another solution would be to check for those specific errors that are generated and keep trying the function calls until they are successful. I have not tried to do this yet. It would probably be quite time consuming process to write the code to process the errors because I need to build an executable and reboot everytime I want to test. And again this method is not guaranteed to catch all errors. Surely there must be a better way. I have done some initial investigation into the Windows Service Manager but haven't got too far. I've discovered I'm not a Windows programmer and I don't know what all those NI services listed under "Administrative Tools" actually do. Surely there must be some better way or some tool out there that can check that Windows has finished loading?
David Reeves

Sorry dreeves, I don't have an answer for you. I would like to know the solution myself. I had similar problems recovering from a standby state.
DAQmx takes a while to get going for USB devices and the queue functions didn't recover properly at all. I just sat in a loop checking the status of my attached devices until they initialised properly then moved on from there.
It would be great if there was some way to check the status if the various LabVIEW modules that load on startup. Then, when all the ones you need are ready, continue with the rest of your application.
I would think checking LabVIEW for its status would be more reliable then asking Windows if it has finished starting up.
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle

The application failed to initialize properly(oxc0000142) error message

i keep getting this error message and the laptop just stalls from it.only solution is to pull
the power supply and boot up again.
now i have googled this and found that omnipass conflicts so it wiped off.
two days goes by and now its starting to stall and display this error message.
'running windows xp ser2
and various other progs
i have a up to date AV and nothing found
i also regularly run adaware and spybot.
anyone and any clues or solutions please.

some kind gent on another forum looks like he has helped me so
here is the solution in case anyone else suffers the same problem
go to the ControlPanel>System>Hardware>DeviceManager button, find the "Universal Serial Bus controllers" section, and disable the "Allow the computer to turn off..." setting in the Power Management tab of each "USB Root Hub" item's properties.

Firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.

Win XP Home SP2
Installed Firefox, but receive the following error message:
firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.
Have uninstalled and reinstalled several times, but same message. Firefox won't even open.

Usually someone has been down the track before and occasionally they post some useful details which may help others to investigate and/or eliminate factors in their particular case.
This AccessibleMarshal.dll error seems to have a long history --- posts from 2006 with early Firefox versions had issues similar to yours.
There is a link and an excerpt below which could be worth checking in your case,
particularly since it mentions the problem would occur on a clean install (no previous instance of Firefox on the system and Windows before Vista --??)
Have a look here:
https://bugzilla.mozilla.org/show_bug.cgi?id=712960
and the post to read:
'''Mark Banner (:standard8) 2011-12-22 12:55:21 PST'''
"Created attachment 583905 [details] [diff] [review]
Add the Win32 redistributable directory to the mozconfigs"
"Somehow we missed shipping the Win32 Redistributables from Visual C++. We didn't detect this as it would only show on Windows versions less than Vista, and you'd probably only see it if you had a completely clean install, and you didn't have the dlls installed elsewhere (as it appears my XP system does)."
"If you're seeing this then you want to copy the following files from a Firefox installation:
Microsoft.VC80.CRT.manifest
msvcm80.dll
msvcp80.dll
msvcr80.dll
The patch I'm attaching updates our configuration files to specify the Win32 redistribution directory, which will then cause the build system to include the files in the build."
.... ends....
The earlier 2006 instances also had the same issue in some cases:
forums.frontmotion.com/viewtopic.php?f=10&t=393
Hope this progresses the search and resolution.
Cheers

I purchased and downloaded Photoshop Elements 13, but the installer fails to initialise. How do I get it to work?

I have Photoshop Elements 10 and Premier Elements 10 installed on my PC. Both were installed from discs that I bought a few years ago. I recently purchased the upgrade (by download) for both applications to version 13. In accordance with the (scant) instructions received by email, I downloaded the four files required from the Adobe site. I subsequently ran the .exe files, which in turn created directories on my PC, including set-up.exe files for both applications. When I run the setup files, I get an error message stating that the installer failed to initialise. The error message advised me to download the Adobe Support Advisor to detect the problem. That tool does not exist. I then sought assistance from the Abobe support site, initially using the hyperlink suggestions, which were of no use, then using the chat function. The operator kept trying to get me to do something with something called 'Creative Cloud'; which I am not familiar with, and do not use. He then instructed me to download and run a CS5 cleaner tool; however, none of the choices offered by that tool include my issue, or either Photoshop Elements or Premier Elements. I am reluctant to uninstall version 10 of the programs in case I end up losing the lot and therefore wasting even more money than the purchase price for this upgrade.
All I want to do is upgrade my two applications from version 10 to version 13. I have paid the requisite fee but it clearly does not work. I appear to have totally wasted my money. Can anyone please tell me how to get it to work? I do not want to have anything to do with the so-called ‘Creative Cloud’ as I have no idea what it is, and I do not want to lose what I already have (and have paid for previously).
I have tried for a few days to access the so-called 24/7 chat assistance but appeared to have been locked out as every time I try to access it, I get a message that the (24/7) chat is closed. Adobe has taken my money for a product that does not work, and also refuse to help me fix it.
I am very frustrated with a product I bought that does not work, and a 24/7 support service that clearly is not 24/7, and which refuses to assist me. Can anyone PLEASE tell me how to get this to work? Rod.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

Flash 10.3 "failed to initialise"

Hi All
I've been creating an image for distribution on a number of kiosks, running Windows XP SP3 & when I do a fresh instal of Flash 10.3 (i.e. the version released today) I get a "Failed to Initialise" message. Further more the flash.exe installer file vanishes from my desktop. I have been downloading the player directly from Adobe. Has anyone else experienced this issue? I'm trying an older version of flash instead.
Kind Regards
Craig

Further to this, I have installed 10.2 - now any flash site I see says flash player is not installed. Further more, the adobe flash about page will not display as IE states the publisher cannot be recognised. Has there been a huge screw up at Adobe?

Installed application failes to initialize

My application works fine when installed on my computer which also has CVI Installed. When the application is installed on a different computer, it fails to initialize. I have selected the low level support drivers to be installed. However, the dll files associated with that do not get installed along with the rest of the program. Thus, when started an error message says it cant find dll files. After copying the dll files into the application directory. I get the following error type: LWTCPJSOCKWNDYCLASS: RealtimeAnalysis.exe - Application error. The application failed to initialize properly (0x0000142). Click OK to Terminate application.

I would check in Add and Remove Programs to see if the drivers were actually installed. If not, you can try to install them manually. Most of our drivers are free downloads that you can find on ni.com/support.

The application failed to initialize properly 0xc000007B.

HI team, I had developed an console application in visual studio 2012 .when i running it on local machine it works fine but when i run this EXE on server 2003 it shows me : 0xc000007B Error - The application failed to initialize properly 0xc000007B .pls
help me out . Thanks in advance.
saurabh singh

Thanks for Wyck's help.
Hi Saurabh Bhadoria,
I think Wyck's suggestion would be helpful, I doubt that your windows server 2003 doesn't have the enough requirements.
In addition, as far as I know, one important issue is that the .NET 4.5 doesn't support the Windows Server 2003.
Reference:
https://visualstudio.uservoice.com/forums/121579-visual-studio/suggestions/2723735-make-net-4-5-work-on-any-os-that-supports-4-0
https://social.msdn.microsoft.com/Forums/vstudio/en-US/4aeb7755-7cf5-44bf-b83b-b928e082ac33/install-visual-studio-agents-2012-on-server-2003-sp2?forum=vssetup
So even if it is the C# app, if you build it with .NET 4.5, I still doubt that it would have a limitation for it since the .NET 4.5 doesn't work in windows server 2003.
So if possible, please compile your app with old .NET version, and make sure that the old .NET version could install in this Environment.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sqldeveloper application failed to initialize properly

I'm using winX64 and sqldeveloper isn't working....
Error msgbox: application failed to initialize properly (0xc0000018)
I downloaded the latest developer....also I tried the sqldeveloper.bat and it just flashes a cmd prompt window quickly and then disappears....no error ,but no sqldeveloper either.....
directory locations:
c:/sqldeveloper
c:/apex

That was it...I have to set path to the java.exe directory....I told the
sun installer to update the enviroment path,but I guess it didn't point
correctly...
Thanks....
Hey... I put a posting for msaccess migration problem....Have you experienced any problems with migration or know of any tips...I kept getting #5 Xml Exporter
errors....

QT 7.1.3 plugin doesn't initialise properly in IE7

Since installing IE7, I have had problems with the Quicktime 7.1.3 plug-in for Internet Explorer. The issue seems to be related to the IE7 security "enhancements" but I have not been able to find a solution.
An example - if I click on a movie trailer on the QT Movies web site, I get a "Plugin Error" message that reads "An error occurred inside a plugin contained on this page". If I OK it away I get a second "Plugin Error" message that reads "The plugin did not initialize properly". If I persist in trying, IE7 will crash. This is in the "Internet" security zone for IE7.
Some probably related behaviour that I have observed: If I try to open a .mov file on a network drive with IE7 (this is in the "Local Intranet" security zone), I get a blank browser window. No error message, but nothing happens. If I open the same file on a local drive (in the "My Computer" security zone), the QT plugin and IE7 do their job properly. The weird thing here is that, once I have intialised the plugin properly in this way, I can navigate to the QT Movies web site using the same browser window and eveything works perfectly.
Is there some security setting in IE7 that I have missed? Any ideas on how to solve this problem so that the QT plugin initialises properly in the "Internet" security zone of IE7?

Yeah, this has been going on since early Nov'06, w/no response from Apple.
Read here:
http://discussions.apple.com/thread.jspa?threadID=725520
I don't know if Apple has abandoned their software plugin for IE or what. I'd just recommend to move on to other audio video formats that do work, as a solution does seem likely to be forthcoming from Apple.

When I run itunes diagnostic tests, I am told secure link to itunes store failed. My firewall is not blocking itunes. I have tried to download two itunes products and these have failed to download properly. What do I do?

When I run itunes diagnostic tests, I am told secure link to itunes store failed. My firewall is not blocking itunes. I have tried to download two itunes products and these have failed to download properly. What do I do?

WIndows Vista and 7 uninstall instructions:
http://support.apple.com/kb/HT1923
Windows XP instructions:
http://support.apple.com/kb/HT1925
I would say a removal is necassary! this will not affect the content

NILM.EXE Applicatio​n failed to initialise properly 0xc0000142

Similar Messages

Maybe you are looking for

NILM.EXE Application failed to initialise properly 0xc0000142