NiMax does not show hardware servo card

I have a machine that went down and I am trying to very quickly learn about the NI products. The PC has a PCI Servo card in it that is recognized and installed by win 2000. It says it is working, but the LabView application says that there is no board at the address requested when it is launched. It sounds like the configuration/initialization of the card is corrupted. I opened NiMax, but in the tree on the left it does not show any cards under my computer. Any help appreciated.
Thanks!

Hello hokie1989,
The first thing to do is to make sure that you have the correct software installed. Which NI Motion driver do you have installed? This can be found in Measurement and Automation Explorer under the "Software" section. I would try reinstalling the motion driver but before you do the install make sure you take out the PCI card first. Once your computer recognized the card as an NI motion controller you should see it in MAX under Devices and Interfaces >> NI Motion Devices. Also If you install a different version of the motion driver you will need to update the firmware on the motion card. This can be done by clicking on your device in MAX and then selecting "Update Firmware" in the right window. I hope this information helps. Thanks and have a great day.
Regards,
Mark T
Applications Engineer
National Instruments

Similar Messages

Laptop computer HP Pavillion dv7 does not show sd memory card

I put my 16 GB SDHC class 10 new memory card into my laptop memory card slot reader
but the computer does not even show an icon for the memory card slot reader. When I pushed the card all the way in
my Kaspersy Virus software asked me if I wanted to scan the new memory card. So it was recognised by Kaspersy.
What to do? I am trying to download a firmware upgrade for a camera I own. I have dowloaded the firmware but cannot tranfer the file because the computer is not showing an icon for the memory card.

Formatting in post #2 was removed. Reposting: Further details added as found: Selecting Device Manager | View | Devices by Connection and browsing down the tree shows: dv7-3060us -- ACPI x64-based PC ---- Microsoft ACPI-Compliant System -------- AMD PCI Express (3GIO) Filter Driver ---------- PCI Standard PCI-to-PCI Bridge 1394 ------------ OHCI Compliant Host Controller ------------ JMB38X MS Host Controller ------------ JMB38X SD Host Controller ------------ JMB38X SD/MMC Host Controller ------------ JMB38X xD Host Controller Examining details on above shows this: Device Class GUID {4d36e970-e325-11ce-bfc1-08002be10318} PCI bus 10, device 0, function 3 Any troubleshooting hints? Could a connector worked loose from the motherboard?

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

MAX does not show scanner card

I'm using an Allen-Bradley 1784-PCDIS PCI scanner card, and it does not show up in MAX. I've un-installed the card, un-installed NI-DNET 1.41, then re-installed NI-DNET, installed the scanner card, and it still doesn't show up. The card does communicate if I use A-B's RSNetworx or IOLinx, but if I try any LabView VI's, I have no luck. Any ideas or suggestions?
I'm running Windows XP Professional with LabView 6.1.
Additional note - the same PC has a NetMos dual RS-232 card installed, which also doesn't show up in MAX, but it works perfectly with any VI that I test it with.

Hi knorcross
The NI-DNET software supports only National Instruments DNET (and with restrictions CAN) hardware products. DeviceNet products from other vendors are not supported (and thus, they won't show up in MAX). For information or device driver software, please refer to the documentation you received with your Allen-Bradley 1784-PCIDS scanner card.
-B2k

Sd card reader does not show up as a external hard drive any were on my mac

i have a sd card reader that is run through usb. i plug it in whit my card in it that has files on it but the driver does not show up any were not on the desktop not any were ive gone through the trouble shooting on apples sight but no luck. any one have a idea?
the weird part about it is that it worked a few weaks ago no problem like i would just plug it in and it would show up on my desktop

It seems that Intel Macs have problems seeing (the media in) some USB storage devices.
For example I have a Zynet CR-T1-U28 8-in-1 memory card reader. It works A-OK on an old Powerbook running 10.3.9, and on several PPC-based newer machines running 10.4.10. The cards I've tried in it mount immediately and show up on the desktop (and iPhoto starts automatically if appropriate).
However none of the FAT-formatted cards I've tried will mount on any Intel-based machine I've tried it on (all have been running 10.4.10).
Here's how it shows up on my Macbook:
USB Storage Device:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Generic
Product ID: 0x3260
Serial Number: 20030903213338562
Vendor ID: 0x0aec
And here's how it shows up on the old Powerbook:
USB Storage Device:
Capacity: 60.75 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Vendor Name: Generic
OS9 Drivers: No
Product ID: 12896 ($3260)
Speed: Up to 12 Mb/sec
Bus Power (mA): 500
Serial Number: 20030903213338562
Interestingly one kind of card I've tried, a Sandisk M2 card, the 64 MB card shown on the powerbook, mounts A-OK when it's in my Z710i phone and is connected via USB to the macbook. At first I thought the card reader could be at fault, but given the number of (admittedly vague) reports I've seen here today about similar problems with other devices I'm more inclined to blame some driver or kernel problem on Intel macs.
The following showed up for the first time ever in the console log during today's test to get the System Profiler data:
Jul 22 14:27:17 macweird kernel[0]: USBF: 773285.286 IOUSBCompositeDriver[0x60c0c80](USB Storage Device) GetFullConfigDescriptor(0) returned NULL

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

USB Drives works, but does not show up in "Safely Remove Hardware"

USB Drives works, but does not show up in "Safely Remove Hardware"
windows 8
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello Mickey2003
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I am not able to change credit card or billing info, it writes that I should alter the reason, but does not show me any problems. Im am not even able to put my account to no credit card. What is happening??

For two days I have tried to bye some apps, navigation programs and charts within the program.
I have tried on the Ipad and the PC, but I am not able to alter any info in my account, every time I try to change anything,the result is it writes that I should alter something beforeI can continue, but it does not show me what is wrong. I even tried make it without credit card and still it says that there is something wrong.
I am not even able to delete the credit info I have on one of the Ipads, I have 4 i am working on. Please advise

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I have a iPad mini, I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699?viewlocale=en_US&locale=en_US
Try the link above. Try to find a phone number for your country, call and ask for account security.

IPhoto 9.4.2 does not show mp4 movies to import from SD Card

Hello mates, since last december when I reformatted my Macbook, iPhoto is not showing the movies in my SD Card when I import photos. Before formatting, it always showed the photos and movies, but I don't know what happened or what I have to do to make it show and import the movies again.
If I copy the movie from SD Card to Desk and try to import it to iPhoto, it does, but when I close and reopen iPhoto, it does not show the movie there anymore and If I open the contents of iPhoto Library and check for the file, it is there fisically.
What could be happening to my iPhoto?
Thanks in advance.

but it still does not accept mp4 movies neither show them in my sd card when I plug it in my MBP.
Is this when you plug in the memory card into the MBP card reader? What do you see in the card when you use the card reader? Is the Finder view preferences set to show memory cards on the Desktop when inserted into the reader?
OT

H800-30ea,USB Drives works, but does not show up in "Safely Remove Hardware"

hi
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello takpesar,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I redeemed my iTunes $25 card yesterday and only used $2.00 but it does not show in my account. I'm trying to make a purchase but it just wants my credit card info

I redeemed my iTunes $25 card yesterday and only used $2.00 but it does not show in my account. I'm trying to make a purchase but it just wants my credit card info

Go to Apple logo (top left) > App Store > Store (Top row of options) > view my account > log in > then edit the details.

What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

If the iPhone was unlocked unofficially, it has been locked to original carrier again.

HT1918 I have Unknown Itunes charges on my credit card. I need help to identify the purchases. It does not show in my Itunes purchase history but only one my credit card statement.

I have some unknown Itunes charges on my credit card that I have been busting my brains on getting an answer. I HATE not getting to talk to a real person!!!! Same amount Charges show three consecutive days but does NOT show on my itunes purchase history. Suggestions greatly appreciated. A hammer to smash the computer would help too.

If they don't show on your purchase history on your account then have you have you added or changed your credit card details on your account - when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) ? If not then you could contact iTunes Support via this page and see if they can see what they are for : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

NiMax does not show hardware servo card

Similar Messages

Maybe you are looking for