Nintendo 3DS connects to N Network despite it bein...

I don't know but I kind of want an explanation here. So my BT Home Hub 3 is set to "N 40Mhz" The hub did tell me that devices which are b/g will not connect to an N network, however my 3DS does and it only supports B/G. Other people on the internet say that their 3DS does not work with other routers which are only N. Does anyone have an explanation?  
EDIT: So with the HH4 there is this 5GHZ band option. I am seeing if any of my devices support it. Most of my devices support N but I am not sure on 5ghz. I have searched on the internet for 5ghz compatibilty but I can't find anything. So if anyone could be helpful could they find out?
Here are my devices:
Acer Aspire One AOD260
MSI Wind U135DX
i Know I only listed a few devices as I already know some devices compatibilty

No easy way of checking if its 5GHz compatable best way is to google the card but it normally comes down to price. An expensive card will be dual 5 and 2.4GHz most cards are 2.4 GHz only. You wont find anything with just the name you have given. You will need to find the model number and for that you are probably going to have to pull the card out of the machine. Here is a list of the broadcom parts for wifi. If you can find out the controller chip version and check against this list.
http://www.broadcom.com/products/Wireless-LAN/802.​11-Wireless-LAN-Solutions

Similar Messages

  • My phone is not connecting to any network despite having activated it already

    Hi,I am in Italy and my phone is not connecting to any network, I am stuck here even though I had enabled roaming on my phone. I have no access to any phone line here to call EE and resolve the issue. Can EE staff please help re-connect my line for roaming? I am using a strangers phone to post this message. I appreciate a quick help since I am stuck here with family.

    Buying a bundle doesn't mean that your device will work aborad you need to make sure roaming is enabled on your account.
    turning on roaming on the device does not give you roaming when abroad.
    If you have a EE extra plan you still need to make sure roaming is enable on your account your plan only gives you free/cheaper calls when abroad.
    If your wanting to enable roaming on your account there could be a deposit to pay if you haven't had the device for about 6 months.
    Unless you have paid the deposit then roaming is not enabled on your account.
    You need to activate roaming on your account by calling 150 from your device or from a landline 01707 315000 before you leave the UK.
    But you can still do this if you are abroad.
    If you have had the device/contract for 6 months or over you can login to your online account and turn on roaming yourself
    Manage this device>Usage controls>Roaming abroad - Allow and Call abroad and turn it on. If the option is not there you need to call
    It can take 24 hours to activate
    If you had this device/contract for under 6 months you need to call customer services on +44 7953 966250 from a landline.
    Once you have activated roaming you can then use this link to see what cost there is and what bundles you can have.
    http://explore.ee.co.uk/roaming/ee
    Please read this about voicemail
    http://ee.co.uk/help/getting-started/setting-up-voicemail/divert-to-voicemail
    And this
    http://ee.co.uk/articles/set-up-your-phone-for-using-abroad
    Also sending a text to 150 with the words of RO country your going to i.e. RO Spain will get you a reply of what the costs will be from that country.

  • Cannot connect to 4G network after update to OS 10.3.1

    Have a Q10 through Sprint and after updating to OS 10.3.1 from the Blackberry site, phone will now only connect to 3G network despite availablity of 4G network. Phone used to connect to 4G network with OS 10.2,

    I do have same problem, i'm unable to connect to even 3G network and it connect to 2G network only when there is full network
    My page on: App World
    Check out my Apps 1). QFileExplorer 2). My ABCD
    System Explorer APPID: 35601892

  • Nintendo 3DS not connecting during online games to Macbook Pro or Airport Express Network. Please Help.

    I would love to post this question to the Nintendo Support forums, but I'm abroad right now and it seems I am denied from the forums if I try to log in.
    My Nintendo 3DS's internet features all work perfectly fine except when it comes down to directly playing a match with other users. For example, Mario Kart 7 will download Spot pass data like normal every day, but everytime I tray to play a match online, the software gives me an error. Same thing when I try to connect with people on Animal Crossing: New Leaf. My previous linksys router back in the states worked fine. The security was WEP I remember. Now I've got myself an Airport express and neither it nor my Macbook Pro (when sharing is turned on) will permit me direct online access to other users like I stated above. I even disabled security and went with an open network for a few minutes and was faced with the same exact problem.
    I know this is very specific and mainly involves a none apple product, but I'm just curious what is different about the Apple wireless networks I'm setting up that is preventing me from nothing but direct realtime interactions with other users.
    Any advice or knowledge about Apple security or wireless networks would really help me out. There are only so many settings I can tweak in the Airport Express so I'm sure it can't be too difficult, but I don't even know where to start.

    I guess it's a problem with NAT (Network Address Translation). My ISP is Vectant Ltd. so maybe I should get a hold of them. If anyone has any work arounds that maybe they used with other game consoles (Xbox Live, PSN), I could really use the suggestion. I really like the Airport express and assumed it would be compatible, but I guess not.

  • Can connect to guest network, not main network.

    I have a Time Capsule setup that works great. I have several Macs that run fine on the network. I have one older Power PC that will connect to the Time Capsule's guest network but not the main network despite having the correct password. Every time I try it says "connection failed." Ideas?

    This information tells you that the Power Mac is not capable of connecting to a network using WPA2 Personal encryption.
    Since we've drifted far away from a potential Time Capsule issue at this point, your best option will be to post in one of the Power Mac forums to see if there might be a way to upgrade the operating system to a level where it would support WPA2 Personal encryption.

  • Nintendo 3DS XL

    Anyone planning to pick up the bigger, better Nintendo 3DS XL handheld console?  Touting a 4.8-inch screen and longer battery life, this might be a good time to jump in on the newly refined 3D handled device.
    Nintendo 3DS XL release date: August 19th, 2012
    FEATURES
    Feel the thrill of playing on a 90% larger screen than the Nintendo 3DS
    Take handheld gaming to a whole new level with 3D visuals that can be viewed by the naked eye
    Two screens give you the same versatile gameplay you've loved in other Nintendo DS handhelds
    Top screen displays 3D visuals that feel like you're peering through a window into a virtual world with true depth
    Use the stylus to navigate on the bottom touch screen
    Adjust the 3D effect from its highest level to a scaled-back level or turn it completely off with the 3D Depth Slider
    Built-in camera offers personalized fun with pictures and more
    StreetPass and SpotPass communication allow you to connect to friends, other players or wireless hotspots from your 3DS XL
    Includes 4GB Secure Digital card for use in the eShop
    3DS XL is able to play all Nintendo DS games but DS games will not appear in 3D
    Pre-order the Nintendo 3DS XL on BestBuy.com 

    Hyperfludd wrote:
    Will Best Buy have a trade in deal for those looking to upgrade from the 3DS to the 3DS XL?
    I am not aware of one but I know we've done some type of promotion on handheld gaming systems in the past.  The best place to watch for something like this would be the weekly ad.

  • How can I see what equipment is connected to my network?

    I use a Time Capsule for my home network. Is there a way for me to see each device that is connected to my network at any given time?
    There has been an unknown device continue to show up in finder under "shared".... I've reset my network password a couple times and the device continues to show up. (Its identified as "npica53cf")
    Thank you

    Its identified as "npica53cf"
    I think HP has used default network printer hostnames in the format: npi + last 6 digits of the device's MAC address (e.g. "ca53cf").

  • Apple TV 1st Gen can no longer connect to wireless networks

    My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home.  I rean the diagnostics at the reset screen and the Apple TV says it is performing normally.  In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago.  The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty.  The issue is limited to the Apple TV.  I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network"  the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
    This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
    Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
    Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks.  I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
    If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.

    Follow-up:  Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
    Next, disconnected the ethernet cable.  ATV1 froze and was restarted using the Menu + ( - ) combo on the remote.  Re-ran diagnostics yeilds: Apple TV is working fine.
    Restarted, then went to configure the Wirelss settings.   Apple TV once again does not show either of the two wireless networks.  Selecting "Other..." and entering the SSID yields the same immediate response:
    "There was a problem connecting to the network. Check your settings and try again. (-4)"
    No change on the wireless front :-(   Bummer.
    Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
    Thanks for your help. -- Paul

  • Can no longer connect to my network and 'forget network' option has disappeared??

    Can no longer connect to my network and "forget network" option has disappeared???  (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.

    JEM24 , your suggestion is included in:
    - iOS: Troubleshooting Wi-Fi networks and connections
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    JEM24 wrote:
    Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

  • Iphone 4 does not stay connected to my network

    Since upgrading to 6.1, my iPhone 4 does not stay connected to my network.  I have to input my password each time I leave my house.  My other devices stay connected, so the issue is with the upgrade.  Has anyone found a way to keep their IPhone connected to their network?  Thanks.

    I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

  • My deskjet 3050 j610a isn't connecting to the network in my house.

    my deskjet 3050 j610a isn't connecting to the network in my house.  I've tried about everything and it still not connecting.  It's a wireless printer and it's not connecting to either my desktop or my laptop.  what do I do now?

    Select  ▹ System Preferences ▹ Network. The WiFi connection should be at the top of the list on the left, and selected. Click the button labeled Assist me and select Assistant. Follow the prompts. How far do you get?

  • My mac air does not recognize my printer connected to a network

    Is usb to lightening the correct connection to see the printer

    Hello there, Appletreflie.
    The following Knowledge Base article should have some practical information for you to help setup your printer:
    OS X Mountain Lion: Set up a printer
    http://support.apple.com/kb/PH11145
    Specifically:
    Add a network printer to your list of printers
    You can connect to printers on your local network that use Bonjour, IP, and Open Directory, as well as shared printers and printers connected to a Time Capsule or AirPort base station.
    Be sure to follow any instructions from your network administrator.
    If the printer isn’t connected to your network, follow the instructions that came with the printer to unpack it, install ink or toner, add paper, and connect it to your network.If you’re connecting a printer to a Time Capsule or AirPort base station’s USB port, see this help topic:Set up a printer connected to a Time Capsule or AirPort base station
    Choose Apple menu > Software Update to make sure OS X has the latest information about printer software it can download from Apple.Usually you shouldn’t install software that came with the printer on your Mac. OS X downloads the latest printer software automatically.
    Open a document to print, and then choose File > Print.
    Open the Printer pop-up menu and choose your printer in the Nearby Printers section of the menu.
    If you don’t see your printer, choose Add Printer from the Printer pop-up menu.A dialog appears listing any Bonjour, IP, shared, and Open Directory printers on your local network. It may take a minute or two for your printer to appear.If you’re asked for an administrator name and password
    Select your printer when it appears in the list, and then click Add.OS X automatically uses AirPrint if your printer supports it, or it selects printer software (also called a printer driver) and downloads it from Apple if necessary.
    If you don’t see your printer in the list, do one of the following:
    For an IP printer, click IP in the toolbar and enter the printer’s information. For more information, see this help topic:Set up an IP printer
    For a shared Windows printer, click Windows in the toolbar and enter the printer’s information. For more information, see this help topic:Connect to a printer shared by a Windows computer
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • My Iphone 5 won't connect to a network or wifi

    My Iphone 5 won't connect to a network or wifi, I just got the phone less then a month ago.....It is driving me nuts and I don't know how to fix it!I

    Have you read through the user guide and taken basic troubleshooting steps?  What have you done so far to troubleshoot?

  • Have an airplay enabled AV Receiver - how do i set up Airplay    I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

    have an airplay enabled AV Receiver - how do i set up Airplay
    I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
    Do I need Apple TV or to change some settings somewhere?
    Any help would be greatly appreciated

    You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
    About AirPlay Mirroring in OS X Mountain Lion:
    http://support.apple.com/kb/HT5404
    iOS: Recommended settings for Wi-Fi routers and access points:
    http://support.apple.com/kb/HT4199
    Troubleshooting AirPlay and AirPlay Mirroring:
    http://support.apple.com/kb/TS4215
    Good luck in setting up 802.11 wirelesss network.

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

Maybe you are looking for

  • Abap mapping: copy substructures

    Hi all, I try to find a simple and quick way to fill some fields of a destination message getting values from an input message by tag name. More exactly: Input message. S1.   f1   f2   f3 S2   f4   f5   f5 Output message, D1.   d1   d2   d3 D3   d4 I

  • Why are images rendering so poorly in InDesign CS6?

    My display performance is set to High Quality, but I'm still getting poor image quality when I import the screenshot. This is actually unbelievable. All of my colleagues are having the same problem (which doesn't exist in earlier versions of InDesign

  • Dsl with Arch

    Ok, ive hunted for quite a while on this issue and people dont seem to have the answers. This is what I'd like to know... I keep getting a timeout on trying adsl-start and the same values work on winfroze on the same box. for setting up a straight di

  • Sum of multiple fields

    Hi.. My table has the following fields date(date), teamname(varchar), production(inetger), nonproduction(integer) There are data for a particular team for every date of a month . and there will be so many teams. I want a query that returns the teamna

  • My apple is sign is disabled?

    IMHO apple I'd is disabled, I have been on hold for 20 Min. Any suggestions?