NISINK not included in the model library

I'm trying to use SIT , after I installed the modules I tried to get the NISINK but I couldn't find it in the library.
the second concern is : can i use SIT with Quanser DAQs?
regards.

Hi,
Have you recently upgraded the version of Simulation Interface Toolkit that you are using? If you are used to using an earlier version than 2.0 I can understand why you would be used to seeing these functions but as part of the upgrade in 2.0 they have been replaced. Check out this knowledgebase article that discusses why this happened.
Simulation Interface Toolkit 2.0 Has Different Function Blocks
As far as using a 3rd party device goes, we don't gurentee support. You might want to contact the manufacturer of your DAQ board to learn what it is compatible with. I hope this helps,
Regards
Eric A.
National Instruments
Distributed I/O Product Support Engineer

Similar Messages

When I first bought it, it was meant to use all the services provided by Great Apple including the new LTE service as a main service for such device. Now I just realize that such service does not match with the model I have ... Pease advise ..

Greetings,
I hope this email finds you well. I bought my iPhone on December 1st, 2012 with a track order W459517623. When I first bought it, it was meant to use all the services provided by Great Apple including the new LTE service as a main service for such device. Now I just realize that such service does not match with the model I have, as per this link:
http://www.apple.com/iphone/LTE/
Model A1429
(GSM model)
Saudi Arabia - Mobily
The model Apple sent is A1428
I believe that such service should be provided to my devices too. Also, Apple always find best ways to solve such queries.
Please advise me
Thank you and Regards,
Abdulrahman

I'm assuming you bought it via the Apple Online store. Contact them. Use the Contact Us link at the bottom of the page. Did you buy the phone from the store in the country you intend to USE the iPhone? If you bought the phone in the US store and intend to use it OUTSIDE the US, you only have yourself to blame, as they shipped the CORRECT phone for use in the US.

Where Can I Find Components And Footprints Not Included In The Circuit Design Suite Databases?

One of the most common questions asked by users of the Multisim and Ultiboard suite is about finding components. From time to time you may come across the need of a particular component or footprint (lanbdpattern) that is not included in the master databases. So where can you look for these components? There are multiple places to begin your search, both 3rd party and from NI that are free and readily accessible:
One of the long-standing free resources is the Kittmaster's Component Database which is maintained by Kittmaster (Chris) one of our proven active veterans of this board as well as a Beta Tester of the Circuit Design Suite. You will find a vast collection of already built parts in Multisim and Ultiboard formats that have been submitted by users like you that have register on kittmaster's database and that actively upload custom component creations. I encourage you to register and share.
NI has recently created the Circuit Design Community in response to requests from users around the world. The Circuit Design Community aims to provide an open resource for designers that need or would like to share Multisim components, Ultiboard footprints, sample design files and other documents that are of use for the design community. The basic difference between the Circuit Design Community and this Circuit Design Discussion Forum is that the Community is tailored for document and file sharing, whereas the Forum is designed with problem solving, tip sharing and general support questions in mind. Again, I encourage you not only to search, but also to share any components you may have created that are useful for other designers.
Most manufacturers that offer SPICE or PSPICE models in their websites would typically allow you to download them free of charge, in most cases accepting a license agreement. The first step is to identify who the manufacture of the part you are looking for is, as well as cross-reference manufacturers. Then search in their corresponding websites for the product folder or design resources section. If you find SPICE or PSPICE models you can easily import those when creating a new component, remember that Multisim is highly compatible with PSPICE models, and every new release adds more compatibility. If you cannot find the model, it does not hurts to call or email the manufacture and ask directly if they have such models, in many cases they are not advertised in the web.
Last, but not least, use your favourite internet search engine and see if anyone out there has posted or worked on a similar model.
Thank you for using the support resources and I hope that these options fulfill most of the component searches that you may need to do.
Message Edited by nestor on 04-14-2009 02:52 PM
Nestor
National Instruments

You can have a look at some established projects that are using similar tools - where do they put the application files etc.
There are things like XDG_CONFIG_HOME, XDG_DATA_HOME etc. http://standards.freedesktop.org/basedi … atest.html

Android res folder not included in the ane extension

Hi.
I am trying to develop an android extension fro air, but I have a problem with resources.
According to this : http://help.adobe.com/en_US/air/extensions/WSf268776665d7970d-2e74ffb4130044f3619-7ff8.ht ml
The res folder should be included inside the created extension. But it actually isn’t.
for this test I simply use the basic Hello world Vibrate test, but I added a new png in the drawable folder.
As you can see while unziping the .ane file, then going to META-INF/ANE/Android-ARM
the res file is absent.
As a result, the program crashes when I try to access my ressource FREContext.getResourceId("drawable.ppy_accessory_manage.png")
Has anyone managed to make resources work with ANE in android?
PS, here is my batch to compile the ANE :
set adt_directory=C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\bin
set root_directory=C:\Users\hugo\Adobe Flash Builder 4.6
set library_directory=%root_directory%\HelloANELibrary
set native_directory=%root_directory%\HelloANENative
set signing_options= -storetype pkcs12 -keystore "C:\Users\hugo\Adobe Flash Builder 4.6\certificat.p12"
set dest_ANE=HelloANE.ane
set extension_XML=%library_directory%\src\extension.xml
set library_SWC=%library_directory%\bin\HelloANELibrary.swc
"%adt_directory%"/adt -package %signing_options% -target ane "%dest_ANE%" "%extension_XML%" -swc "%library_SWC%" -platform Android-ARM -C "%native_directory%" library.swf HelloANENative.jar

Answer given on stack overflow :
http://stackoverflow.com/questions/8060041/adobe-air-3-native-extensions-android-res-folde r-not-included-in-the-ane-file

Licence is not included for the material - J1IH

Hi All
We are working on ECC 6.0.
While doing J1IH ( Additional Excise) with Subtransaction Type 01, we are getting a warning message as -
Licence is not included for the material
Message no. 8I993
However if we process without any Subtransaction Type, no warning is flashed.
Please let me know the reason for the same and what could be done so that system doesnt prompt it?
Regards
Kapil

Hi
Check SAP note 1223591
Regards
Antony

Licence is not included for the material

Hi,
I have maintained account ddetermination for DIEX ETT for sub transaction type 22. When I am doing Additional Excise in J1IH system is giving the warning message as "Licence is not included for the material" and it is not picking any G/L accounts. Where as without subtransaction , it is picking concerned G/L accounts. Please suggest, what I have to do?
Regards,

Hi
Check SAP note 1223591
Regards
Antony

IMovie '11 How do I recover a project that appears within the IMovie Projects folder but does not show in the Project Library?

I have had my MBP for just over 3 months now! Yes, I made the switch and up until now I have been quite happy.
I now have my Time Capsule, Apple TV running and am generally getting used to life as a Mac user.............even bought Aperture and loaded all the family photos. Now time to make some Travel movies.
I have been working on a particular IMovie project for a few weeks now. Size is 365MB. Yesterday I closed IMovie and when accessing later that project is not available in the Project Library window. It does appear in the IMovie Projects folder but I cannot open it. I have copied the file to DVD just in case. All up I have 4 Projects, the other 3 are practice files, smaller but they do appear in the Project Library.
I have scoured the bulletin boards and tried many suggested fixes to no avail. Main suggestion was to remove the following files from Library/Preferences
com.apple.iMovieApp.plist
com.apple.iApps.plist
However, this did not sort out my problem. In the end I put back the original files.
Does anyone have a straightforward fix for my problem or is this one of those ongoing issues that that needs Apple's attention.
After all the file is there with the others. They are available.
I realise that I can restore from Time Capsule but I am missing the last three days thanks to 'drop out'.
Thanks.......

Gweggie Boy wrote:
Yes, considering we have an ongoing 'glich' within an Apple program with no obvious solution, we should be able to direct it straight to an Apple rep. I will peruse this possibility when I get a moment.
You can report the problem by providing feedback to Apple. In the iMovie app, from the menu select iMovie > Provide iMovie Feedback. This will take you to an Apple page where you can complete a form and submit it to Apple.
The fix for this will probably turn out to be simple/easy.....................so why doesn't Apple comment and/or address it????
Other than the forum moderators, Apple doesn't normally monitor these forums, nor make comments on posts. So, it's up to us to report the problem to them directly (using the feedback form mentioned above).
As the problem has affected me just the one time (touch wood), I haven't bothered to report it as yet. But, after seeing your posts on this, I'm now reconsidering that. Something must be triggering it. My system is in pretty good shape, so I'm guessing it must be a glitch of some sort, either in Mountain Lion or in the iMovie app itself. Perhaps it's a 3rd party app causing the problem? It doesn't give us much confidence now, in that we may start worrying about losing other projects.
A good practice is to duplicate the project from time to time (something I'll be doing more of), although Time Machine backups also provide the necessary security. To duplicate, in Project Library view (where all the projects are listed) click on the project name so that it is highlighted, then select File > Duplicate Project. Alternatively, right-click (or Control-click) on the project name and select Duplicate Project from the pop-up menu. Of course, you may already know this. Duplicating probably won't guarantee that the copy will not also disappear from the Project Library, but is worth doing anyway.
As I mentioned in the post I linked to earlier, when the problem arose with my iMovie project I was using ProRes 422 clips I had imported from a Final Cut Pro X Event. My immediate thought was that ProRes 422 had caused the problem. But this of course may have been coincidental - reinforced now by your experience, where you are probably working with Apple Intermediate Codec (AIC) clips.
Anyway, glad to hear that you've recovered your project through Time Machine. Unfortunately, I had to start from scratch as I had Time Machine turned off during my editing sessions (that's a story for another day).
John

How do you add the name of a song to a downloaded track not reccognized in the iTunes library. I copy songs from my own CDs and want to properly identify them instead of the current "Track 02". Thanks

How do you add the name of a song to a downloaded track not reccognized in the iTunes library. I copy songs from my own CDs and want to properly identify them instead of the current "Track 02". Thanks

Right-click the track in your library, Get Info, go to the Info tab, and type in the correct information. When you are done, click "OK."

Local node not included in the list of host names for grid installation

I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
[FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
ACTION: Include the local node in the list of host names for grid installation.
Edited by: 982828 on Jan 18, 2013 1:18 PM

Hi,
what Oracle Version are you trying to install?
Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
Regards
Sebastian

Why i cannot create the sql azure database from my own country 'Nepal' ?. why it is not include in the list of country when we sign up for azure database. :( !!!

why i cannot create the sql azure database from my own country 'Nepal' ?. why it is not include in the list of country when we sign up for azure database. :( !!!
canot we try this new feature ,dosnot we need to try this too..why such discermination for our country nepal. :(

Hi Anil,
I am Mahesh from Microsoft Innovation Center. From August 2014 we have made Azure Available to Nepal. You can now directly sign in to azure with your Nepal Based Mobile Number as Verification.
Thanks for showing your Interest in our Product.
Mahesh Dahal

Why it is popular applications are not included in the official repo?

Why it is very popular applications like yaourt (GPL), pacman-color (GPL) and many other free programs are not included in the official repositories?
Why not create an official "non-free" repository for popular non-free software?

There will never be an AUR helper in the official repositories because it runs counter to the AUR policy - which is: it's unsupported, so we're not facilitating its use. You need to be aware about the potential drawbacks of its usage, which involves getting you, the user, to make that call to install an AUR helper - which involves more than just calling pacman. Can't comment on pacman-colour, but apart from colour, it doesn't really add any functionality afaik .

Specified anchor not found in the model in SAP Records Management

Hi Experts,
We are on SRM 7.0 SP 8 PPS with ECC 6.0 Ehp 4 with RM.
I have managed to Integrate SRM with RM with some issues.
The issues are:
RFx with attachment is not displayed in RM through related links.
Whereas RFx without attachments are visible.
Contract and PO with attachment are also visible in RM.
The only piece remaining is the RFx with attachments:
Errors in SLG1 RM client are:
Source: CL_SRM_POID===================CP , CL_SRM_POID===================CM012 ,        28
Message no. SRM_REGISTRY151
Invalid Service Provider Space ID
CL_SRM_POID_DIRECTORY=========CP , CL_SRM_POID_DIRECTORY=========CM001 ,        56
Message no. SRM_REGISTRY151
The interface reference transferred for the POID object is invalid
Message no. BL001
Source: CL_SRM_SP_RECORD==============CP , CL_SRM_SP_RECORD==============CM00J ,        12
Message no. SRM_REGISTRY151
Back End: Anchor Not Found
Message no. BL001
Error during Records Management update for SRM/EBP element Object ID: 4000000700 Logical System: LS_SRD600 Processing mode: CREATE
Message no. /SAPPSPRO/RM_UPD_ERR000
Error with creation of an attachment POID. SPS ID
Message no. /SAPPSPRO/RM_UPD_ERR017
Could not add elements to record
Message no. /SAPPSPRO/RM_UPD_ERR006
Could not update POID relationship directory
Message no. /SAPPSPRO/RM_UPD_ERR007
The SRMCALLMON XML errors are:
Application Error:
SRM_GENERIC_SP</ID>    <NUMBER>820</NUMBER>
<MESSAGE>An internal error has occurred -- check application log</MESSAGE>
SRM_GENERIC_SP</ID>   <NUMBER>812</NUMBER>
<MESSAGE>Specified anchor not found in the model
This is happening only to RFx with attachments. If i save an RFx without attachment, then its displayed in RM. If i add attachments later to the RFx still its not displayed in RM.
Kindly help me out, Gurus.
with regards,
Freemindmind.

anybody?

IPhoto - When I add new photos to iPhoto from my iMac they do not appear in the "Photos" library. They do appear in Last Import. Any thoughts?

iPhoto - When I add new photos to iPhoto from my iMac they do not appear in the "Photos" library. They do appear in Last Import. Any thoughts?

If you are seeing your photos in "Last Import", the photos are somewhere in your library. Perhaps the dates are wrong, and you do not see the photos arranged by date, where you expect them to be.
Select one of the photos on "Last Import", then ctrl-click it and select "Show in Event". That will take you to the event in event view.

Iphoto 9.5 won't import photos from iPhoto 7.5. Library will not update using the iPhoto library upgraded application.

iphoto 9.5 won't import photos from iPhoto 7.5. Library will not update using the iPhoto library upgrader application. Repeatedly says it can't locate photos even when told to cancel. I think the photos in question are in Nikon RAW format.

iPhoto 9.5 immediately tries to "upgrade" my library using the upgrader.
iPhoto 9.5 asks you to run the upgrader to prepare the library for 9.5. It then will update the library to its format.
You need to do the following:
1 - go to your Applications/Utilities folder and double click on the iPhoto Library Upgrader 1.1 application.
2 - select Choose Library, navigate to your iPhoto library, select it and let the upgrader do its thing.
3 - launch iPhoto 9.5 to open and finish the conversion of the library.
OT

.ear file is not including all the required files for deployment

While deploying from JDeveloper, some of the files (eg. <Project>.cpx file, .class file) are not included in the .ear file.
Pls help.

Is the .ear file deployed with the Deploy to EAR file selection?

NISINK not included in the model library

Similar Messages

Maybe you are looking for