Nivvglk.sys blue screen dump on new computer

I replaced a broken computer with a Supermicro X8ST3 w/RAID5 running XP 5.01.2600 servicepak 3. On this new computer I get nivvglk.sys dump stop on 2nd or 3rd run after reboot. Have many other computers that work fine on this software installation suite. VXI is connected with 1394. Resman runs ok. There is a 1394 hangup is inside VXITech vtvmSmip_init() -> viMoveOut16() (initial clearing TraceRAM). Any ideas?

Hi,
Are the other working computers the same make/model and did you use an image to install this software suite? Can you elaborate on your “the 2 or 3 runs after reboot” comment? Is there a program that you are running that is causing this blue screen that will run 2 or 3 times without error? Would you be able to send in a dump file if needed?
Matt
Applications Engineer
National Instruments

Similar Messages

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

Atikmpag.sys blue screen

Hello there,so i got this atikmpag.sys blue screen appers in my laptop,i though i could fix it with a format ao i tried than,now not only it didnt got fixed but i cant run in safe mode anymore because windows have so install,any way to get rid of the blue screen?my laptop is G62-b90EV,
Thanks in advance
This question was solved.
View Solution.

@Telis13
Ok since you have managed to get into safe mode. You can try removing the the video driver and reinstalling the driver from the HP Support website.
HP G62-b90EV Notebook PC Drivers
Be sure to select the correct operating system for your notebook and download the updated driver. I am assuming that you will do this on another computer and transfer the driver to your computer using a flash drive or some other usb removable media.
After trying that then reboot the computer and see if the problem remains. IF it does then try the things from my previous post. If the system restore does not work for you, then I would recommend backing up the contents of your hard drive to another driver and then perform a a system recovery.
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Anyone seeing a nwdelmdm.sys blue screen error connecting to a jetpack?

Anyone seeing a nwdelmdm.sys blue screen when connecting to a jetpack?

Jetpacks do not require any software unless you are referring to a USB connection. If so then your Jetpack USB drivers have become corrupted and should be reinstalled. Id assume NW in nwdelmdm.sys is referring to Novatel Wireless.
If you have any other USB modem connection software or drivers you might want to clean them up too.

Vista SP2 BUGCode error blue screen dump

I haven't had a days problem with my PC for almost 2 years. Keep up with updates routinely. Installed SP2 and now get blue screen dumps.
Been working with Microsoft for a week. Have isolated a USB Generic HUB driver if disabled I do not dump. Driver appears to be related to internal fingerprint reader that uses digital persona sw.
tried updating the driver an no good. Any ideas?
Apparently there is an issue with HP's and this upgrade on PC using Nvidia controllers. Suppose to have an unpublished hotfix but the file was empty.
Since it is related to Digital Persona (i think) microsoft won't be able to help anymore.
JP5

Benn working with Microsoft support for free they have put in over 20 hours on this. We have traced ti to the finger print reader from authen Tec and my HP all in one C7280. If the reader is enabled and you plug in the printer it will crash within 20". If I disable the reader I can plug in the printer,
Prior to SP2 it ran fine. Microsoft is reluctant to remove SP2 and I am not happy with HP as their software updater is te one that told me to install it and they want to charge for telephone support even though it is apparant it is a driver from their 3rd party software. they said to update bios which I did and it did nothing.
JP5

I was able to use the program before. Now when I go in all I see id the blue screen with the new upgrade info.

I was able to use the numbers program before. Now all I see is the blue screen with the new updates. How do I fix this. I have already downloaded the new version of Icloud & open office $ installed.

Are you talking about doing this on your iphone? Or something else?

Blue screens with my new P45 Neo3-FR motherboard

Blue screens with my new P45 Neo3-FR motherboard
I have recently purchased this Motherboard and being trying since few overclocking combinations unsuccessfully
I have a Dual Core E8400 Rev.E0 processor and the best I had so far is 3.6 MHz (400x9) at stock voltage.
I am trying to achieve 450 FSB (450x8.5) stable with memory @900 MHz.
I have increased Vcore to 1.28v and 1.31v, Vram is on 1.9v and I left all other voltage settings on Auto.
Disabled CPU C1E function and & Spread spectrum.
As soon as i raise the clock over 400MHz is when the problem start.
Most of the time is happening when the machine has been left (idle) for a while, I just click anywhere,or just start a programme
and suddenly I get a blue screen and the machine re-boot, and again I run Prime for 3 hours (torture test) and not a single blue screen.
Very weird..
I have 2 MB (2 x 1024) dual corsair memory DDr2 PC6400 XMS2 (5-5-5-18) modules and an ordinary Ati Radeon Powercolor HD 3600 graphic card.
I tried to run both memory stick in single mode and one at the time, but still getting those blue screens.
I have built this system re-using a couple of years old power supply from Hyper (505W).
I need some advice as I am trying to establish which component is to blame.
Could this be caused by the PSU, perhaps malfunctioning or inadequate for this motherboard ?
Also thinking about the memory....memory seems running OK till 960 MHz with processor at 400 x 9 (1:1.20 ratio).
Or perhaps is the Motherboard ?
I have Vista Home Premium Edition OS.
Please advice guys.

Hi Guys,
I`ve just updated to Bios v.1.71b
Raised FSB to 445 Mhz and kept multilier to 9x (445 x 9 = 4.005 Ghz)
Vcore to 1.335v
Dram to 1.904v
MCH to 1.304
VTT FSB to 1.34v
ICH still on Auto
Disabled C1E support, Spread spectrum and Intel EIST support.
Set ram to 1:1.00
Tested several times with Super PI & Intel Burn Test and machine is stable so far.

Satellite A100 - sptd.sys blue screen error

Hello,
Hoping someone can be of help with this.
I have a Toshiba A100 with Windows XP Media Center Edition 2005.
When I try to boot up my computer, I get a message saying windows did not start successfully.
I am given the options of:
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration
Start Windows Normally
None of these options works. When I attempt Safe Mode, I get the following message:
multi(0)disk(0)rdisk(0)partition\Windows\system32. ...etc
This message repeats over and over again very fast, each time with a different .sys file at the end. Then, I get this message:
Press Esc to stop loading sptd.sys...
If I press escape, I get the following blue screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file: sptd.sys
The driver mistakenly marked a part of its image pagable instead of nonpagable.
I dont know what to do except for using the product recovery CDs and reformatting, but I cant afford to lose some of the data on my computer, and this would wipe it all.
Has anyone had experience with this? Any advice?
It would be much appreciated.

Hi
Seems the OS system or the partition, where the OS has been installed, is corrupt.
I have no idea why this happened but there are many different reasons for that
Anyway I think you have no other choice as to reinstall the OS using the recovery disk.
You would like to get access to the data on the HDD???
Well, you could remove the HDD from the notebook and could connect it as an external USB device to another computer. Then you should try to copy the data to another HDD.
That might help

Windows 7 CLFS.sys Blue Screen

Yesterday I installed Visual Studio 2013 which required a reboot. Immediately after rebooting the system I got a BSOD caused by clfs.sys with error 0x50 and the following message: PAGE_FAULT_IN_NON_PAGED_AREA. I tried LITERALLY everything I found online
(including related topics posted here) but none worked. At this point, I can't even boot to Windows. It immediately crashes on the loading logo.
So I gave up and decided to reinstall the OS. After inserting the bootable USB, I still get the same BSOD!!! I don't understand why this happens
when trying to install a clean version. This didn't make sense to me, so I used Bootable Partition Wizard and completely
wiped out and formatted my C: drive hoping it would at least let me reinstall Windows. Surprisingly that didn't help either. I still get a blue screen when booting into the installation disc.
I'm totally lost at this point. What is going on? How could this possibly happen when booting into the installation disc?? Do I have to do something with the master boot record? Any help would be greatly appreciated.

AM
Could be hardware, MBR/EUFI, a corrupt win 7 image, or many other things. So where are you now? Is there any bootible OS on the system? Have you tried booting into safe mode (F8)?
If you cannot boot you have a brick. If you are comfortable with it you may need to start pulling out hardware to see if you can it to boot in any manner, or perhaps take the HD to another computer, etc.
Should you ever get to where you can boot we need the DMP files to diagnose
We do need the actual log files (called a DMP files) as they contain the only record of the sequence of events leading up to the crash, what drivers were loaded,
and what was responsible.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
BCC 50 is usually a driver
Bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
The PAGE_FAULT_IN_NONPAGED_AREA bug check has a value of 0x00000050. This indicates that invalid system memory has been referenced
Wanikiya and Dyami--Team Zigzag

Blue Screen crashes on new HP Pavilion P7-1235 Desktop system

I set up a new HP Pavilion P7-1235 desktop system running Windows 7 64-bit on Tuesday. Since the initial setup, the system has crashed at least 10 times. The Blue Screen shows STOP: 0x0000001E (000000000,00000000,00000000,00000000) - all zeroes for all parameters. Though no other error or crash code appears on the Blue Screen, I used the utility BlueScreenView to look at a couple of minidumps. The error code KMODE_EXCEPTION_NOT_HANDLED and the module identified was NTOSKRNL.EXE in a couple of dumps and HAL.DLL in others. I would appreciate any help in determining the cause of the problem and how to fix it. Thanks in advance.

did you try what I mentioned in my original post? check for updates?
Printer update page:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=4083652&lc=en&cc=us&dlc=en&jumpid=oc_r10...
other suggestions:
Uninstall the printer software and then just let the printer plug and play automatically, don't install the software.
searching on HP.COM for your printer/ troubleshooting I found this link that may help.
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=1973&tmp_task=solveCategory&cc=us&dl...
good luck
bill
I'm a HP employee

How can i get my hp dv-7 to stop blue screening with the new ocz vertex 3 ssd

installed a new ocz vertex 3 ssd on my pavilion DV-7-6b75nr and it will now not stop blue screening.Even took it to a computer shop and they could solve the issue. is this laptop not meant for sata 3 SSD's or do i need a certain one or does hp have to install it? windows7,computer 3 weeks old,I7 processer...using the SSD for my os and main boot drive..Computer shop said i might need to rewrite HPs bios...??

Hi,
You can find the list on the following link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02763358&tmp_task=prodinfoCategory&cc=us&dlc=en...
Please install the following list:
1. Software multimedia
2. All components of Software solutions
3. Utilities
from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5064...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

"bad_pool_header tcpip.sys" Blue Screen

I had a problem with some blue screen crashes about a week ago and i updated and reinstalled a few things and they seemed to have stopped. Today I got the same Blue Screen error as before and it seems that whatever the problem was wasnt fixed earlier and
i'm hoping someone can help with with this problem. The crash has happened mostly when im opening a new tab in my browser, I use google chrome. I have uploaded the minidumps of the last few crashes here. https://www.mediafire.com/?8t9eborbwldrrui
Thanks in advance

You are having some memory corruption issues. I suggest that you uninstall
ScpService.exe, at least for temporary troubleshooting purposes and if that does no stop the crashing, please run driver verifier (DV) per the instructions in the link below.
Note:
Make sure to read and remember the steps to reset DV in the event of a crash, and post a link to the newly generated crash dump here.
Driver Verifier-- tracking down a mis-behaving driver. Co-Authored by ZigZag3143& JMH3143
http://answers.microsoft.com/en-us/windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4b6d-95b3-c48669e4c983
BUGCHECK_STR: 0x19_d
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: ScpService.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff803796b28a0 to fffff8037955d9a0

Rthdaud.sys blue screens in boot camp

Hi all, have been playing around in boot camp (gaming for the most part) and twice now have, after a few hours of perfectly fine system running, been presented with a blue screen naming rthdaud.sys as the cause. As this is the realtek audio high-def driver, I assume it's part of the boot camp driver package and should be okay.
What would be the first thing to try? Should I reinstall the apple boot camp driver for this? Perhaps get the driver (updated version?) from realtek's website directly? Thanks in advance for any help.

Apple today introduced Boot Camp, new public-beta software for Mac OS X that lets users of Intel Macs boot directly into Microsoft Windows XP. While the move may contradict previous statements by Apple, the company said they still have no intention of fully supporting Windows on the Mac.
People who read this also read:
People Who Like This Also Like
Windows on Mac: What you need to know 21024159
WWDC: Microsoft kills Virtual PC for Mac 21015245
First Look: From the Lab: XP-on-Mac benchmarks 21024413
World Tech Update 21490391
TaskPaper 2.1 21486845
Will Apple's App Store change the desktop app market? 21484083
Recommendations by Loomia
After we released the Intel-based Macs we had a lot of customer requests asking if it’s possible to run Windows on those machines,” Brian Croll, Apple’s senior director of Software Product Marketing, told Macworld. “We decided we would help it along by creating Boot Camp.
The software, available today as a public preview version of a feature from the forthcoming Mac OS X Leopard, includes an assistant application to aid with drive partitioning and the installation of Windows drivers for Mac hardware.
mukesh
Camping-Camping

Igdkmd64.sys blue screen

How exactly do I trouble shoot what is causing this random blue screen igdkmd64.sys? Thanks!

Hi,
Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US please see Microsoft Worldwide Home for regional support phone numbers.
http://www.microsoft.com/worldwide/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

NETIO.SYS blue screen

Hi,
I've a Windows Server 2008 SP2 Enterprise Edition member of a cluster, this node experiences a blue screen shortly after boot, I've inspected the memory.dmp file with windebug and this is the output:

5: kd> !analyze -v
*                        Bugcheck Analysis
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
        use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
        use .trap on that value
Else
        .trap on the appropriate frame will show where the trap was taken
        (on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050031
Arg3: 00000000000006f8
Arg4: fffff80001e87125
Debugging Details:
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff80001e651ee to fffff80001e65450
STACK_TEXT:
fffffa60`01cbaa68 fffff800`01e651ee : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000006f8 : nt!KeBugCheckEx
fffffa60`01cbaa70 fffff800`01e63a38 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x6e
fffffa60`01cbabb0 fffff800`01e87125 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb8
fffffa60`01cd6f70 fffff800`01e8769f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!SepMandatoryIntegrityCheck+0x15
fffffa60`01cd7010 fffff800`01e3817b : fffffa80`331e9350 fffffa80`30d567c8 00000000`00000001 00000000`00000000 : nt!SeAccessCheck+0xaf
fffffa60`01cd7100 fffffa60`00a0ac6e : 00000000`00000000 fffffa60`00a0b37b fffffa80`331c2de0 fffffa80`331dc010 : nt!SeAccessCheckFromState+0xf3
fffffa60`01cd7800 fffffa60`00a0b447 : 00000000`00000000 00000000`00000001 00000000`00000002 00000000`00001383 : NETIO!MatchValues+0x14e
fffffa60`01cd7880 fffffa60`00a0b4fb : fffffa80`31a54220 fffffa80`331d2590 00000000`00000000 fffffa80`31a54220 : NETIO!FilterMatch+0x77
fffffa60`01cd78c0 fffffa60`00a0c4e5 : 00000000`00000000 00000000`00000002 fffffa60`01cd7e30 fffffa60`01cd8270 : NETIO!IndexListClassify+0x4b
fffffa60`01cd7920 fffffa60`01278cd7 : 00000000`00000032 fffffa60`01cd7db0 00000000`00000000 fffffa80`32be2e40 : NETIO!KfdClassify+0xa35
fffffa60`01cd7c80 fffffa60`012792fe : fffffa60`01cd8790 00000000`00000003 fffffa60`0132bbc2 fffffa80`30c79320 : tcpip!WfpAleClassify+0x47
fffffa60`01cd7cc0 fffffa60`012799dc : 00000000`00000001 00000000`00000000 fffffa80`32b90080 fffffa80`30c79320 : tcpip!WfpAlepAuthorizeSend+0x5ce
fffffa60`01cd8190 fffffa60`01278987 : 00000000`00000000 00000000`00000000 00000000`0000003a 00000000`00000000 : tcpip!WfpAleAuthorizeSend+0x2ac
fffffa60`01cd83d0 fffffa60`012706f8 : 00000000`00000000 00000000`0000003a fffffa80`32be2e40 00000000`00000000 : tcpip!WfpAleConnectAcceptIndicate+0xd7
fffffa60`01cd84c0 fffffa60`012716ae : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : tcpip!ProcessALEForTransportPacket+0x538
fffffa60`01cd8680 fffffa60`01273574 : 00000000`00000000 fffffa60`011d292d fffffa80`32150087 fffffa80`32b90000 : tcpip!WfpProcessOutTransportStackIndication+0x30e
fffffa60`01cd8930 fffffa60`0127a826 : fffffa80`32be2e40 fffffa60`01221afa 00000000`00000000 fffffa80`32b87970 : tcpip!IppSendDatagramsCommon+0x494
fffffa60`01cd8d50 fffffa60`01221790 : 00000000`00000002 fffffa80`32b90080 fffffa80`32b90000 00000000`00000000 : tcpip!IppSendDatagrams+0x26
fffffa60`01cd8d90 fffffa60`01309b50 : 00000000`00000001 fffffa80`32b88d30 00000000`00000000 fffffa80`32b90080 : tcpip!IppSendDirect+0x110
fffffa60`01cd8ec0 fffffa60`0124d9fc : fffffa80`32b88d30 fffffa80`32b90080 fffffa80`32a46620 fffffa80`32b87870 : tcpip!Ipv6pSendNeighborSolicitation+0x130
fffffa60`01cd8f70 fffffa60`0124cf1c : fffffa80`32a46620 00060000`0d000000 00000000`00000000 00000000`00000000 : tcpip!IppSendNeighborSolicitation+0x8c
fffffa60`01cd8fe0 fffffa60`01270e25 : 00000000`00000000 fffffa80`32a46620 00000000`00000000 fffffa60`01cd9500 : tcpip!IppResolveNeighbor+0x1ec
fffffa60`01cd9040 fffffa60`012743f8 : 00000000`00000000 fffffa80`333779b0 00000000`00000001 fffffa60`01267165 : tcpip!IppDispatchSendPacketHelper+0x575
fffffa60`01cd9140 fffffa60`0127385a : 00000000`00000000 fffffa60`00000006 fffffa80`00000028 fffffa80`00000000 : tcpip!IppPacketizeDatagrams+0x2e8
fffffa60`01cd9270 fffffa60`0125b32e : fffffa60`01cd9b50 fffffa60`0126b82d 00000000`00000000 fffffa60`01cd9950 : tcpip!IppSendDatagramsCommon+0x77b
fffffa60`01cd9690 fffffa60`01323975 : 00000000`00000000 fffffa60`012651f2 00000000`00000020 fffffa80`0000000e : tcpip!IpNlpSendDatagrams+0x3e
fffffa60`01cd96d0 fffffa60`012b6afb : fffffa60`013453e8 fffffa80`32ab15f0 fffffa80`32ab1738 00000000`00000000 : tcpip!IppSlowSendDatagram+0x45
fffffa60`01cd97d0 fffffa60`0126c1f8 : fffffa80`32ab15f0 fffffa80`32b1b901 00000000`00000000 fffffa80`333778b0 : tcpip! ?? ::FNODOBFM::`string'+0x3e89b
fffffa60`01cd9b10 fffffa60`0127b8ab : fffffa80`32ab15f0 00000000`00000f0d 00000000`00000005 fffffa60`01260000 : tcpip!TcpTcbHeaderSend+0x428
fffffa60`01cd9ca0 fffffa60`01253aed : fffffa80`30cd0f00 fffffa80`00000005 fffffa60`01cd9ef0 fffffa80`30d3c270 : tcpip!TcpFlushDelay+0x20b
fffffa60`01cd9d60 fffffa60`01253b99 : 00000000`00000000 fffffa80`33224ab0 00000000`00000000 00000000`00000000 : tcpip!IppDeliverListToProtocol+0x4d
fffffa60`01cd9e20 fffffa60`012531bb : fffffa60`013466d0 fffffa80`32b90080 00000000`00000000 fffffa60`01cd9ee0 : tcpip!IppProcessDeliverList+0x59
fffffa60`01cd9e90 fffffa60`0125250c : 00000000`00000030 fffffa80`30d3c270 fffffa80`32b90080 00000000`00000000 : tcpip!IppReceiveHeaderBatch+0x22b
fffffa60`01cd9f80 fffffa60`01251af4 : fffffa80`32b88d30 00000000`00000000 fffffa80`32b85601 fffffa80`00000001 : tcpip!IpFlcReceivePackets+0x8dc
fffffa60`01cda180 fffffa60`01261d03 : fffffa80`32b85610 fffffa60`01cda2b8 fffffa80`32b85610 fffffa60`00970001 : tcpip!FlpReceiveNonPreValidatedNetBufferListChain+0x264
fffffa60`01cda260 fffffa60`009a90bc : fffffa80`32b86010 fffffa80`339f1d30 fffffa60`01cda400 fffffa80`313071a0 : tcpip!FlReceiveNetBufferListChain+0xd3
fffffa60`01cda2b0 fffffa60`009718c9 : fffffa60`01cda410 00000000`00000000 fffffa80`32a0f010 00000000`00000001 : NDIS!ndisMIndicateNetBufferListsToOpen+0xac
fffffa60`01cda300 fffffa60`0080e5c4 : fffffa80`313071a0 fffffa60`01cda898 00000000`00000001 00000000`00000001 : NDIS!ndisMDispatchReceiveNetBufferLists+0x1d9
fffffa60`01cda780 fffffa60`009a98a6 : fffffa60`00000001 fffffa60`00000103 fffffa80`339f1d30 fffffa60`01cda8a0 : NDIS!ndisMTopReceiveNetBufferLists+0x24
fffffa60`01cda7c0 fffffa60`04c69905 : fffffa80`33782ac0 fffffa80`33a2c830 00000000`00000001 00000000`0000006a : NDIS!ndisMIndicatePacketsToNetBufferLists+0x106
fffffa60`01cda860 fffffa60`04c6f99f : fffffa80`32a10520 fffffa80`33a2c830 fffffa80`32a10520 fffffa80`338bfb10 : netft!MaReceivePacket+0x65
fffffa60`01cda890 fffffa60`04c707aa : 00000000`00000000 00000000`00000000 fffffa80`33911938 00000000`00000001 : netft!TaReceivePacket+0x143
fffffa60`01cda8d0 fffffa60`053490a8 : 00000000`00000000 fffffa80`33988530 fffffa80`33988501 00000000`00000001 : netft!NetftReceiveDatagramHandler+0x106
fffffa60`01cda910 fffffa60`01243ee4 : fffffa80`33826800 fffffa80`32d72620 fffffa80`32d72470 fffffa80`32d72620 : afd!WskProTLEVENTReceiveMessages+0xb8
fffffa60`01cda970 fffffa60`012439fb : fffffa80`30d30000 fffffa80`338268e0 fffffa60`00000000 fffffa80`32282aac : tcpip!UdpDeliverDatagrams+0x164
fffffa60`01cdaad0 fffffa60`01253aed : fffffa80`32a2b080 fffffa60`00a070c2 00000001`32a10002 fffffa80`30d3be80 : tcpip!UdpReceiveDatagrams+0x1bb
fffffa60`01cdaba0 fffffa60`01253b99 : 00000000`00000000 fffffa80`32a12680 00000000`00000000 fffffa60`00971abd : tcpip!IppDeliverListToProtocol+0x4d
fffffa60`01cdac60 fffffa60`012531bb : fffffa60`0134c050 fffffa60`0134c050 00000000`00000011 fffffa60`01cdad20 : tcpip!IppProcessDeliverList+0x59
fffffa60`01cdacd0 fffffa60`0125250c : fffffa80`30d02a80 00000000`00000020 fffffa80`32a2b080 fffffa80`30d3c000 : tcpip!IppReceiveHeaderBatch+0x22b
fffffa60`01cdadc0 fffffa60`01251af4 : fffffa80`32940420 00000000`00000000 fffffa80`32a12601 fffffa80`00000002 : tcpip!IpFlcReceivePackets+0x8dc
fffffa60`01cdafc0 fffffa60`01261d03 : fffffa80`32a12680 fffffa60`01cdb0f8 fffffa80`32a12680 fffffa60`00970000 : tcpip!FlpReceiveNonPreValidatedNetBufferListChain+0x264
fffffa60`01cdb0a0 fffffa60`009a90bc : fffffa80`32a17aa0 fffffa80`32b11490 fffffa60`01cdb200 fffffa80`313bf1a0 : tcpip!FlReceiveNetBufferListChain+0xd3
fffffa60`01cdb0f0 fffffa60`009718c9 : fffffa60`01cdb250 00000000`00000000 fffffa80`32a12a50 00000000`00000001 : NDIS!ndisMIndicateNetBufferListsToOpen+0xac
fffffa60`01cdb140 fffffa60`008066f7 : fffffa80`313bf1a0 00000000`00000002 fffffa60`01cdb760 fffffa60`05205ce7 : NDIS!ndisMDispatchReceiveNetBufferLists+0x1d9
fffffa60`01cdb5c0 fffffa60`0520456b : fffffa60`00000000 00000000`00000000 fffffa60`01cdb648 00000000`00000000 : NDIS!NdisMIndicateReceiveNetBufferLists+0x67
fffffa60`01cdb600 fffffa60`052069c0 : 00000000`00000000 00000000`0000ffff fffffa60`00000000 fffffa60`00000001 : vmswitch!VmsMpNicPvtPacketForward+0x27b
fffffa60`01cdb6a0 fffffa60`0520499b : 00000000`00000000 fffffa60`01cdb900 fffffa80`336abbc0 fffffa60`01cdb910 : vmswitch!VmsRouterPvtRoutePackets+0x200
fffffa60`01cdb8a0 fffffa60`009a90bc : 00000000`00000002 fffffa60`01cdcc60 fffffa80`31562600 fffff800`01e92304 : vmswitch!VmsPtNicReceiveNetBufferLists+0x27b
fffffa60`01cdbae0 fffffa60`00971a5c : fffffa80`31562670 00000000`00000000 fffffa80`328c3a50 00000000`00000000 : NDIS!ndisMIndicateNetBufferListsToOpen+0xac
fffffa60`01cdbb30 fffffa60`008066f7 : fffffa80`312d11a0 fffffa80`336abbc0 fffffa80`00000000 fffffa80`32189000 : NDIS!ndisMDispatchReceiveNetBufferLists+0x36c
fffffa60`01cdbfb0 fffffa60`050e1750 : fffffa80`336abbc0 fffffa80`32189000 fffffa80`3386c03f 00000000`00000000 : NDIS!NdisMIndicateReceiveNetBufferLists+0x67
fffffa60`01cdbff0 fffffa60`050e1368 : 00000000`00000000 fffffa80`32194b08 fffffa80`3386c000 fffffa60`00000000 : basp+0x11750
fffffa60`01cdc570 fffffa60`009a90bc : fffffa80`3270ea00 fffffa80`3129a1a0 fffffa80`32b11490 fffffa80`3270eaa0 : basp+0x11368
fffffa60`01cdc5c0 fffffa60`00971a5c : fffffa80`3270eaa0 00000000`00000000 fffffa80`3258b4a0 00000000`00000000 : NDIS!ndisMIndicateNetBufferListsToOpen+0xac
fffffa60`01cdc610 fffffa60`008066f7 : fffffa80`3129a1a0 fffffa60`011da0cf fffffa60`01cdcbc0 fffffa80`30a90300 : NDIS!ndisMDispatchReceiveNetBufferLists+0x36c
fffffa60`01cdca90 fffffa60`011da3a8 : 00000000`00000000 fffffa80`32b11490 fffffa80`32157010 fffff800`01e5dc7f : NDIS!NdisMIndicateReceiveNetBufferLists+0x67
fffffa60`01cdcad0 fffffa60`011da451 : fffffa80`32157010 00000000`00000000 fffffa80`32157458 fffffa60`01cdcb90 : bxnd60a+0xb3a8
fffffa60`01cdcb20 fffffa60`0101059b : fffffa80`30acb010 fffffa80`32159000 00000000`00000000 00000000`00000000 : bxnd60a+0xb451
fffffa60`01cdcb70 fffffa60`01010826 : fffffa80`30acb010 fffffa60`01cdcc88 fffffa80`30c93d58 fffffa60`01283ba3 : bxvbda+0x659b
fffffa60`01cdcbd0 fffffa60`01016778 : fffffa80`30acb648 00000000`00000000 fffffa80`30ace698 00000000`00000005 : bxvbda+0x6826
fffffa60`01cdcc50 fffffa60`01016b49 : fffffa80`30acb010 00000000`00010000 00000000`00010000 fffffa80`30c93c28 : bxvbda+0xc778
fffffa60`01cdccb0 fffffa60`01016d63 : fffffa80`30acb010 00000000`00000000 00000000`00000000 00000001`23d6b39a : bxvbda+0xcb49
fffffa60`01cdcce0 fffff800`01e69667 : fffffa80`30acea58 fffffa60`01cb8580 00000000`01cafdb4 fffffa80`30c93c28 : bxvbda+0xcd63
fffffa60`01cdcd10 fffff800`01e698e2 : fffffa60`01016cb4 fffffa60`01cb5180 00000000`00000000 fffffa60`01cbed40 : nt!KiRetireDpcList+0x117
fffffa60`01cdcd80 fffff800`02036860 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x62
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!MatchValues+14e
fffffa60`00a0ac6e 84c0            test    al,al
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: NETIO!MatchValues+14e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 49e02e06
FAILURE_BUCKET_ID: X64_0x7f_8_NETIO!MatchValues+14e
BUCKET_ID: X64_0x7f_8_NETIO!MatchValues+14e
Followup: MachineOwner
any ideas?

Hello,
it seems that my post from yesterday wasn't saved correctly. So I try it once again.
I have a SBS 2008 SP2 Server an the KB Stop error message in Windows Server 2008, in Windows Vista, or in Windows Vista SP1: "0x000000D1"
doesn't fit for me because of SP2.
This is the output of my crash dump:
0: kd> !analyze -v
*                        Bugcheck Analysis
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffffa60010833b4, address which referenced memory
Debugging Details:
USER_LCID_STR: DEU
OS_SKU: 9
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80001c88080
0000000000000000
CURRENT_IRQL: 2
FAULTING_IP:
tcpip! ?? ::FNODOBFM::`string'+5824
fffffa60`010833b4 488b01          mov     rax,qword ptr [rcx]
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
TRAP_FRAME: fffff80002b41550 -- (.trap 0xfffff80002b41550)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa800caa8010 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa800caa8011 rsi=0000000000000000 rdi=0000000000000000
rip=fffffa60010833b4 rsp=fffff80002b416e0 rbp=fffffa800647f870
r8=fffffa800caa8010 r9=00000000013430a0 r10=fffff80001bd5580
r11=fffffa8006250340 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
tcpip! ?? ::FNODOBFM::`string'+0x5824:
fffffa60`010833b4 488b01          mov     rax,qword ptr [rcx] ds:5870:00000000`00000000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80001abb22e to fffff80001abb490
STACK_TEXT:
fffff800`02b41408 fffff800`01abb22e : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff800`02b41410 fffff800`01aba10b : 00000000`00000000 00000000`00000001 00000000`00000000 fffffa80`0647f870 : nt!KiBugCheckDispatch+0x6e
fffff800`02b41550 fffffa60`010833b4 : fffffa80`066539e0 00000000`00000001 fffffa80`06495870 fffffa60`206c644d : nt!KiPageFault+0x20b
fffff800`02b416e0 fffffa60`00a10f18 : fffffa80`0647f870 00000000`01147050 00000000`00000000 fffff800`01a2b151 : tcpip! ?? ::FNODOBFM::`string'+0x5824
fffff800`02b41730 fffffa60`00a0ea3d : 00000000`00000000 00000000`00000000 fffffa80`06c727d0 00000000`00000002 : NETIO!NetioDereferenceNetBufferList+0x78
fffff800`02b41760 fffffa60`0103ed96 : fffff800`02b41850 fffffa80`0b6a1d00 00000000`00000000 00000000`00000001 : NETIO!NetioDereferenceNetBufferListChain+0x28d
fffff800`02b41820 fffffa60`01029824 : fffffa80`06c727d0 fffffa80`0c551c30 fffffa80`05bd6010 fffffa80`05bd44e0 : tcpip!IppCompleteAndFreePacketList+0xb6
fffff800`02b41850 fffffa60`01031c70 : 00000000`00000000 fffffa80`05bd6010 fffffa80`05bd44e0 fffffa60`01147050 : tcpip!IppCleanupMfe+0x44
fffff800`02b41880 fffffa60`010772bd : fffffa80`05bd44e0 fffffa60`0114b558 fffff800`02b41928 fffffa80`05bd6010 : tcpip!IppDereferenceMfe+0x20
fffff800`02b418b0 fffffa60`0107713a : fffff800`02b41ad8 00000000`00000000 fffffa80`05bd6028 fffff800`02b41ad8 : tcpip!IppMfeSetTimeOut+0x10d
fffff800`02b419d0 fffffa60`010773ea : fffffa80`0a72c500 fffff800`02b41ad8 00000000`00000000 fffff800`02b41cd0 : tcpip!IppCompartmentSetTimeout+0x9a
fffff800`02b41a40 fffff800`01abf3fd : fffff800`00000002 fffff800`01bd4e80 fffff800`01bd4cf0 00000000`00000002 : tcpip!IppTimeout+0x5a
fffff800`02b41a70 fffff800`01abe818 : fffff800`02b41cd0 fffffa60`02e6a702 fffff800`02b41cc8 00000000`00000001 : nt!KiTimerListExpire+0x30d
fffff800`02b41ca0 fffff800`01abefaf : 002555b1`b0642875 00000000`00000000 00000000`00000001 fffff800`01bd7a80 : nt!KiTimerExpiration+0x1d8
fffff800`02b41d10 fffff800`01abf8d2 : fffff800`01bd4680 fffff800`01bd4680 00000000`00000000 fffff800`01bd9b80 : nt!KiRetireDpcList+0x1df
fffff800`02b41d80 fffff800`01c8c860 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x62
fffff800`02b41db0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!zzz_AsmCodeRange_End+0x4
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!NetioDereferenceNetBufferList+78
fffffa60`00a10f18 4885ff          test    rdi,rdi
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: NETIO!NetioDereferenceNetBufferList+78
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 49e02e06
FAILURE_BUCKET_ID: X64_0xD1_NETIO!NetioDereferenceNetBufferList+78
BUCKET_ID: X64_0xD1_NETIO!NetioDereferenceNetBufferList+78
Followup: MachineOwner
Any idea what this NetioDereferenceNetBufferList+78
means?
Thanx for your help.
Regards
lukas

Nivvglk.sys blue screen dump on new computer

Similar Messages

Maybe you are looking for