NIWeek 2013 informal study groups

Hi all,
I am currently in Austin for training/classes/exams, and last but not least, NI Week.
I have today and tomorrow (Friday 8/2 and Saturday 8/3) available for studies/professional development and I was wondering if anyone is in the area and would like to meet up at a Panera/starbucks/similar for some informal discussions, preferrably related to preparing for the architect exam, please let me know (reply or PM).
Thanks,
Q
QFang
CLD LabVIEW 7.1 to 2013

We had this problem with our recent migration of c. 350 response groups, many of which had formal agent groups. The cause appears to be that after the migration, the formal agent registration screen sees both the 'old' and the 'new' formal agent groups of
which the current user is a member and resolves these to only one entry on the registration screen (which is understandable). But the entry seems to be connected to the 'old' and not the 'new' agent group. We were able to verify this by checking in the old
and new pool database (rgsdyn) and seeing that even after the migration the formal agents were signing in to the old pool and not the new one. One solution is to delete the members from the old formal agent groups so that future registrations are forced to
take place in the new pool database. However, if you do this, bear in mind that if you have to back out the migration, you have to restore these.
We were also had to abandon one migration attempt because of another problem where the migration tool does not support the migration of agents who are defined indirectly in the agent group through a mail distribution group.
tags: Move-CsRgsConfiguration ; formal agent groups ; lync2013 ;

Similar Messages

1Z0-042 Online Study Group

Hi All,
I'm starting an online study group for the 1Z0-042 exam in early September. If you are interested in more information, please send an email to:
[email protected]
I've also had 2 requests to host a study group for the 8i/9i upgrade exams. If this is of interest, please email me at [email protected] and I'll hook you up.
Best Regards,
Brian Peasey
Programmer/DBA
Wawanesa Mutual Insurance

not sure if this is the right way to prepare for the exam... the link above is broken,
<skip>
Cheers
Laurent
Message was edited by:
Laurent Schneider
valuable advices that do not reveal the content of the exam could be posted here, no need for private emails exchange...

SRM Certification -Study Group

Any one planning to take SRM Certification around NJ please contact me for forming study group and share information and docs and sample tests
James
[email protected]

Hi James,
Me too planning to take certification in SRM, but I am from London...can I join in this group????
Regards,
Shankar
[email protected]

Looking for flash cs4 study group?

If anybody is aware of it, please let me know.
Thanks,
Sathish.

I mean flash cs4 certification study group.
Thanks,
Sathish.

CS5 Classroom in a Book Study Group?

Hello everyone.
I just purchased CS5 design premium and am working through most (if not all) of the Classroom in a Book series.
I'm currently on Lesson 12 of the Photoshop book and will be finishing the book soon, then moving on to either Illustrator or InDesign.
I'm looking to create a study group with some others that might be working through these books.
I find I learn better when I'm asked questions on how to do things vs chugging through a book and not remembering things when I get done.
So if you're interested please reply here or send me a message through the boards and we can connect via e-mail, MSN messenger, google chat, or Skype.
Or maybe we could use these forums here.
I hope to hear from some of you soon.
Best,
Sean

These forums are a great place for learning too. Ask a question, it'll get answered and other methods suggested as well.

How to Insert Sharepoint 2013 Person or Group Field using VBA

Hello,
How to Insert Sharepoint 2013 Person or Group Field using VBA , I tried set the field with ID / ID;Name / Name
but all failed, Please advice
Function SetSP_Field(F_Yer As Single, F_WekNo As Single, F_ProjectNum As String, strField As Variant, strFieldValue As Variant) As String
' test code
    Dim rst         As Recordset
    Dim strSQL      As String
    Dim SP_RecSet   As ADODB.Recordset
    Set SP_RecSet = New ADODB.Recordset
    SetSP_Field = False
    strSQL = "Status Report"
    On Error Resume Next
    Call SP_Connect(2)
    strSQL = "select " & SP_List & ".* From " & SP_List _
           & " Where [Year] = " & CInt(F_Yer) _
           & "   and [WeekNo] = " & CInt(F_WekNo) _
           & "   and [Compass_Code] = '" & F_ProjectNum & "' ; " _
'           & " Set " & strField & " = " & strFieldValue
    'Debug.Print strSQL
    'Debug.Print SP_CN
    SP_RecSet.Open strSQL, SP_CN, adOpenStatic, adLockOptimistic
    If SP_RecSet.RecordCount = 0 Then
        Debug.Print "Record for project: " & F_ProjectNum & " not found"
        LogFile.WriteLine ("Record " & strID & " not found")
    End If
    If Not SP_RecSet.EOF Then
        'SP_RecSet.Edit
        SP_RecSet.Fields(strField) = strFieldValue
        SP_RecSet.Update
        If Err.Number <> 0 Then
            MsgBox ("SP Update Error: " & Err.Description)
            GoTo Exit_Fun
        End If
        SetSP_Field = True
    End If
Exit_Fun:
    SP_RecSet.Close
    Set SP_RecSet = Nothing
End Function

Hi Tim,
Let’s verify the followings:
Whether this issue occurred for other lists in the same site.
Whether this issue occurred for all users who don’t have full control.
Whether this issue occurred on other sites.
When you created the people & group column, which show field did you used? Please try to use a different show field for the people & group column, compare the result.
In addition, please check if the link is useful:
http://www.learningsharepoint.com/2013/08/21/empty-value-in-people-picker-after-saving-the-list-form-in-sharepoint/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

SAP BW Study Group

I am looking to form a study group with people in NY area (preferably Long Island) who want to take SAP-BW certification exam. If you are interested, please contact me.

Hi,
http://help.sap.com/bp%5Fbiv335/BI%5FEN/html/
http://help.sap.com/bp_biv335/BI_EN/html/BW/FinancialAccounting.htm
Regards,
San!

SCJP5 study group -- Utah valley, Utah

Hi,
I'm looking for a SCJP5 study group, in Utah Valley, Utah.
There is a breakout in the Utah Java Users Group, up in Salt Lake City, I just would like to complement that with some more discussion, etc.
Anybody interested in starting a study group?
Thanks
Jerry Blanco.

Hi,
i am also planning to give SCJP 5.0 next month but dont know where to start,
i would like to join ur group.
Regards
Crazy_java

Lync 2013 Attendant Response Group - Long Delay - Error ID 45019 LS Inbound Routing

Hello,
We have a customer who's using Lync Server 2013 with Response Groups and the SamRoxx Attendant Client. They are getting an error whereby calls made directly to users come through instantly, however attendants who take a call via the Response Group
get a 10 second delay. We are seeing
Error ID 45019 LS Inbound Routing
User ***@***.com provided a routing document with errors.
Default call handling was applied instead. Merge conflict. Wait total present in both preambles.
Problems with this user's routing documents will not be reported again for another hour.
Cause: A new or experimental user agent my have published a routing document with errors.
Resolution:
Replace the user agent that published the defective configuration.
Has anyone seen this before??
Thanks
Lync Tips Blog - [email protected] - If this post has been useful please click the green arrow to the left or click 'Propose as answer'

Hi tomcotton,
You can try steps below to troubleshoot the problem.
1. Remove the affected Lync user from the Response Group and test whether the error persists.
2. I’m not aware of
the SamRoxx Attendant Client, can you use Lync 2013 client to test and check ?
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Virtual Study Group - OCP 11g

Hello
Any one interested in joining in a Virtual Study Group for preparing for OCP 11g? I am trying to setup a group to make the prepartion easy and enjoyable by sharing what we learn/read everyday. Please reply whoever is interested. We can use voice chats.
Hoping to see many of you very soon.
Thanks!

Just a warning - when you put your personal email out here, you will be contacted by unscrupulous companies selling bogus practice tests that amount to little more than brain dumps. Please be aware that these materials are illegal and only serve to devalue your certification and everyone else's as well.
You can check a provider's validity on CertGuards' website at http://www.certguard.com/search.asp.
I would recommend that once you have gotten in touch with each other, that you remove your email address from your posting to avoid spamming.
Regards,
Brandye Barrington
Certification Forum Moderator

How to change song information by group?

I know we can change song information by group by selecting multiple items.
However, this option only allow to change a limited set of information.
I can't find a way to change songs by group in some of the options in the "Options" tab, i.e. Remember playback position, Skip when shuffling and Video Kind (for videos only).
Any help is greatly appreciated.

Nothing you can do about it

Exam Study Groups

Hi,
Just wanted to let everyone know that I've expanded the choice of study groups to include all the 9i exams. If you are interesed in more details, please visit us.
Best Regards,
Brian Peasey
http://oracle-exam-study-groups.com

Hi..and my apologies for this late response. I don't know what happened to alerts with this.
A month is about right, but think of two weeks hard cramming just before the test date. Get one or two good resources to focus on the test subject matter.
The exam in my opinion is a real professionalism test. It is easy to fail. Just between you and me and everyone in the WWW, I did fail it. This was because the CD I had was vague & I needed to focus harder on what is tested. I did that within the space of two weeks with STS software, and passed. I would say the test is like any other competency test; if you have the competencies (knowledge) you pass. It's not the hardest test I've ever done by a long shot, but it wasn't easy.
To give you some idea of what I call a hard test;
1) Everyone turns over the paper; you know your in about the bottom 20% of people who can pass this test; The room full of people laughs when they read the difficulty of it in the reading period (nobody actually finished the reading in the reading period). You know that most people will finish only 10 to 50 % of the paper, and the difficulty of it is almost beyond me time wise to complete and knowledge wise. It's a required pass....sweat, sweat
2) Aviation test..you are sitting doing your checks before takeoff on a Multi engine test IFR, professional licence. The aircraft costs $10 per minute; its a three hour test. If you fail, another 15 hours training ensues before retest. One engine is diffcult to start - 1 minute lost....sweat, sweat.
By comparison OCA 10g was a breeze.
Message was edited by:
David_W
Message was edited by:
David_W

SharePoint 2013 Active Directory Groups represented as c:0+.w| SID in UserInformation list instead of c:0+.w|Domain\Groupname

Hi
We are running on SharePoint Server 2013.When we add AD groups as permissions, we see that the group name is being displayed properly in the permissions. Whereas when I click on the groupname I see the SID with the Sharepoint specific claims characters,
instead of domain\groupname. I understand that the claims characters are because of claims mode. But I expected domain\groupname instead of SID. Is this the right behaviour.
When I call SiteData.GetContent web service, I get the SID of the group name instead of the domain\groupname.
Can someone please clarify?
Thanks
Naga

Hi,
Yes, the identity claim for an AD group is based on the SID of the group. The claim encoding for an Active Directory group consists of the following sections:
c:0+.w|<SID>
•"c" for a claim other than identity
•"+" for a group SID
•"." for a string
•"w" for a Windows claim
More information:
http://www.sharepointfire.com/MyBlog/2013/11/get-ad-group-identity-claim-in-sharepoint-2013/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Outlook 2013 - wrap text group policy applied, not working with or without digital signature

Hello,
I'm adding group policies to apply on our new installations of Windows 8.1 with Office 2013. One of the settings being applied is enforcing plain text emails and wrapping text at a certain number of characters. Policies are being added using the Outlook
2013 admx.
When I check the options inside Outlook 2013 the group policy did apply successfully (File, Options, Mail, scroll down to Message Format) The option to "Automatically wrap text at character:" is set to 132 and not adjustable as it should be.
In the group policy I have it set to wrap at 132 characters, but when I go to a client machine and send a digitally signed email, it wraps at the default 76 characters. This makes for very annoying short blocky emails and multi-line hyperlinks.
If I do not digitally sign the email then the text doesn't wrap at all! (until it meets the end of the window). So under no circumstances is it wrapping at 132 where it's supposed to.
Thanks,
-Nick

Hi,
What is your account type in Outlook? Exchange or others?
Please also let me know the email format that you are sending, Plain Text, HTML or Rich Text Format.
You can try sending the same emails in Outlook Safe Mode:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Office 2013 OEM and Group Policies

Has anyone been able to apply group policy to a OEM (or Retail) version of Office 2013.
Particularly I am not able to set the Workgroup Templates Location.
Thank you.

1st, group policy for Office 2013 will apply to all license editions of Office 2013.
2nd, however, there is no such build-in policy for setting the Workgroup Templates Location. To manage the Workgroup Templates Location, we need to add the "SharedTemplates" string under the following registry key (via group policy
or any method you prefer):
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\15.0\Common\General
The workgroup templates location is stored in the
SharedTemplates
string value.
Max Meng
TechNet Community Support
Max that doesn't appear to be the case. We have volume media and click to run installs of Office 2013 and the latter simply do not pick up the Group Policy settings whilst the volume media installs do.

NIWeek 2013 informal study groups

Similar Messages

Maybe you are looking for