NJAWIN displaying pop up error message

Hi.
I am using njawin to display external svg documents/web pages in an applet. It all works well until there is a link to pop up window. jawin.dll is displaying then the following error message:
Event Processing Error
java.lang.NoClassDefFoundError: com/develop/jawin/COMException
I just need to disable this pop up as everything is working and the new window opens anyway. There is no problem with jawin.jar classes in my code.
Could anyone please help me.

Hi,
NJAWIN is a pilot project of OLEJA (OLE for JAva). OLEJA is a commercial product and will be available in near future. Now OLEJA is used intensively as a bridge from Java to Digital Cortex (Composia Ltd.) . The most number of bugs of NJAWIN are fixed in OLEJA.

Similar Messages

To display a continuos Error Message using BADI

Hi Everybody,
                    There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN      Changing      Type     ALM_ME_BAPIRET2_T.
Now, inside your code, declare   DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
        if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
    CLEAR ls_return.
    MOVE 'E' TO ls_return-type.
    MOVE 'ERR_MESSAGE' TO ls_return-id.
    MOVE '999' TO ls_return-number.
    MOVE 'Enter proper error message here' TO ls_return-message.
    INSERT ls_return INTO TABLE return.
    endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

My iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

my iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

No need to Double Post... It is considered impolite.
https://discussions.apple.com/message/20652820#20652820

Open .sql file, pop out error message box

When I double-click the .sql file, sql developer open this file, but windows pop an error message box: windows can't find c:\aaa\bbb.sql. Make sure you type the file name correctly...... I don't know why?
my sql developer version is 1.0.0.15.57, OS is windowsxp.

This is a known problem. There is some problem with the way sqldeveloper registers.

Pop up error messages for failed custom validation

I am using jdev-10.1.3.4
My application is in ADF BC
I am writing custom validation through managed bean, I want pop-up error message for this failed validation.
My problem scenario is:
I had some list box as "status"-when this status changes to failed then the other field namely "closed date" should become madantory and also date in closed date field can't be in future.I am able to have all this validation through managed bean and also able to use af:messages through which i am able to print error message on the top of the form, but i am not able to give pop up error message for this failed validation.
I had gone thru jdev guide but there is nothing like what i am asking.
it would be of great help if someone can give me some example also.
thanks in advance.

ADF has global setting where you can configure the way messages are shown to user:
You can make this setting in adf-faces-config.xml
The <client-validation> element controls how client-side converters and validators are run.
Three values are supported:
"INLINE": validation is shown inline in a page (the default)
"ALERT": validation is shown in an Javascript alert
"DISABLED": validation is only handled on the server
IN your case, set it to 'ALERT'.

Pop-up error messages

I am constantly getting these pop-up error messages and I can't seem to figure out how to get rid them and it is driving me insane.
Adobe Flash Player 10.1.102.64
An ActionScript Error occurred
VerifyError: Error #1014: Class flash.events::ThrottleEvent could not be found.
and
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at com.brightcove.opensource::DataBinder/getVideoProperty()
          at com.brightcove.opensource::DataBinder/getValue()
          at com.comscore::ComScore/getCustomValue()
          at com.comscore::ComScore/getComScoreURL()
          at com.comscore::ComScore/sendBeacon()
          at ComScoreSWF/onAdStart()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at com.brightcove.api.modules::AdvertisingModule/wrapEvent()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at com.brightcove.advertising.api.modules::AdvertisingAPI/onCustomAdEvent()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at com.brightcove.advertising.adSwf::AdSwfDisplay/onCustomAdEvent()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at com.brightcove.fl.advertising.adSwf::AdSwf/dispatchAdEvent()
          at IMA3AdSwf/displayAd()
          at com.brightcove.advertising.adSwf::AdSwfDisplay/onAdInitFrame()
Can somebody please help me out

You're using a version of Flash Player that's a couple of years out of date. You can't expect it to work with all modern websites.

Pop up error message while material posting

Hia,
how can i pop up error message while material posting based on user .
thank u in advance

Hi Ram
Nobody is getting your requirement. Please explain your question.
Thanks & Regards
Kapil Nanda

Pop up error message with yellow exclamation point disappears too fast cannot read it

I am getting a pop up error message with a yellow triangle and yellow exclamation point in Safari but it immediately disappears after it appears. This happens so fast that I cannot read the error message. A java applet for my bank's website is not running properly and knowing what the error message is might help solve the problem. Help please.

Since upgrading to Mac OS X Mountain Lion with the latest security updates, this annoying problem has disappeared.

How to close pop up error messages

Hi,
I am running a sequence that contains sub-sequences. Sometimes an error may occur and a 'System Level Exception Handling' pop up error message will appear. I want the pop up window to be recognised so that my sequence doesn't hang waiting for a user to hit a button on the pop up window. Is there a way to be able to close pop up windows (e.g. error messages from windows) from TestStand?
Thanks a lot,

Hello,
It really depends on the source of the error messages. If the error messages are coming from TestStand, you can turn off the error handling dialogs from the Station Options screen. You can also customize your error processing by overriding the SequenceFilePostStepRuntimeError Engine Callback. However, if the error message is being generated by one of your code modules, then it is outside of TestStand's control and you'll have to implement proper error handling procedures in the code module.
Regards,
Ryan K.

I get a pop-up error message when I try to open Firefox

Whenever I try to open Firefox (latest version installed today), I get a pop-up error message that reads: TypeError: Componentsclasses['@mozilla.org/gmailnotifier;'] is undefined.
When I click the OK button, Firefox opens and operates fine. How do I get rid of that?

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Anyone getting this pop up error message after installing Lion?

After installing Lion I now get random pop up error messages that say...There was a problem connecting to the server. URL's with the type "file" are not supported. I have to keep closing them. Any ideas what to do?

Actually, In my case, turning off Time Machine didn't help. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even gettting it recognized by a different machine first) somehow worked some magic.

When creating po, pop up error message 'address doesn't exist'.

when creating po via me21n, when click delivery tab screen, pop up error message dialog box 'address doesn't exist T001 wsu20 00010'. message no is 'am010'. then i was forced to exit transaction.
ps: 'su20' is my plant, but in me21n, when selecting plant, i can see two 'su20', the diffrence is International address version. why there is two same plant

go into customizing and maintain an adress by clicking the envelope button in the detail to the plant. The adress in the customizing views itself is not sufficient.

When I try to view the Photos tab on Facebook, I get a pop-up error message.

When I click on the Photos tab on Facebook, I get a pop-up error message, telling me to try again.
== URL of affected sites ==
http://facebook.com

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Unusual pop up error message

After one month of use my Verizon iPhone4 started showing a recurring pop up error message, "This accessory is not optimized for this iPhone. You may experience a reduction in signal strength." It comes up every few minutes and I have to close it to continue use of the phone. Very irritating! I have not added any accessory. I have been using a rubberized bumper cover ever since I bought the phone and it hasn't given me any trouble. What's going on?

Lint or other crud in the dock connector can create a short, thus generating that error message. Use some canned air & blow out the dock connector. If necessary, use a soft toothbrush...look closely, it doesn't take much stuck in there to create a short.

Just got an Iphone - Receives email but can't send email to anyone ( POP ). Error Message : "The recepient ... was rejected by the server because it does not allow relaying."

Just got an Iphone - Receives email but can't send email to anyone ( POP ). Error Message : "The recepient ... was rejected by the server because it does not allow relaying." Please help............

Hi johnnytoo!
I know it's aggravating when you need to send an email and it doesn't go through! I have a link that provides step by step information from Apple's website that should resolve this for you.
http://support.apple.com/kb/TS3899
Please post back with your results, and have a good day!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

NJAWIN displaying pop up error message

Similar Messages

Maybe you are looking for