NJB3 and OmniRemote, SSR, or anyone, H
Has this worked for anyone?
I tried this once before, and deserted it after I couldn't get it to work. I got this from the Nomadness site a while back, and ran across the files for it the other day while cleaning up my Puter, and decided to try it again. Boring day you know, with no Zen Touch firmware yet, lol, anyways.....
My question is, can I do this with just my njb3 and palm?
Maybe I'm missing something or not quite understanding it right,
Can I do this with just my NJB3 player and Palm Zire 72 and no Remote, or do I need a remote to learn the signals from, I don't have a Pronto or Logitech Harmony or any Programmable remote that you can upload codes to, in fact If I did I wouldn't need to use the palm in the first place. I tried to follow the directions that came with the zip. But Nada. I do have the remote sensor turned on in the NJB3. I can see the layout on my palm, and it says NOMAD JUKEBOX 3, at the bottom, and all the buttons show and make and audible sound.
I installed the Remote.prc file from the Omniremote7.zip
Then the OmniRemote.prc file from the NJB3_OmniRemote 890.zip, and tried it, but no results, in fact, I get a fatal error using the Remote.prc from the 7 zip, with my Palm Zire 72, but downloaded the pro version 2.5 evaluation version and that?s when I get the omni on my palm, but no signals received on njb3. I tried learning with my Marantz remote just to see if the palm was sending out a signal, it was, received error message on marantz, but just wanted to see if Palm was sending signal.
If there is anyone, SSR maybe, I think I remember reading you had a NJB3, and wondered if you ever tried this, or anyone else who has tried this and made it work I would love to hear how you did it, and maybe a better walkthrough then the one I got off of the Zip file. Thanx for any help, If not, not a big deal just bored and looking for a project to keep me outta trouble till the Touch firmware comes out.
Frank,Owner:NJB, NJB3, ZT20, Next?
Thanx SSR
I Decided to take a chance and downgrade to firmware:
Jukebox 3 Firmware version .32.02 (with WHQL Flash update)
from,
Jukebox 3 firmware update (version .40.06p)
My thinking being, maybe this was done with an older firmware.
I was a little worried, Always a risk going back to an older firmware, but What the Heck, gotta take a chance once in a while.
IT worked, now I can control my NJB3 with my Palm Zire 72.
See what this Zen Touch Firmware wait is doing to me, LOL
Frank, Owner:NJB, NJB3, ZT20, Next?
Similar Messages
-
Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?
That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS. -
I just bought a recertified Mac Mini core duo - it's not the newer model-, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it and using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.
The company I bought it from is not Apple, and I may regret that. It was in my price range, though.
This is the first time I've used this community, and I've been a Mac owner since 2000. Thanks in advance!when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY -
I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?
Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W. -
I updated my iPod touch 4g 64gb to iOS 6.1 and now it's been very slow, safari keeps crashing, apps being very slow and crashing ? Can anyone help ?
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and Clear Cookies, Data and History
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?
I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks -
My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?
Peace Lilly wrote:
... Will I loose everything if I connect the iphone to the itunes as a new device?
To avoid that...
See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991 -
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
-
- on my tv screen is a picture of the device and a big? - anyone know how to fix this?
Hello Cher71,
This behavior indicates that there is a hardware issue with the Apple TV.
Apple TV (1st generation): Starts up to a flashing question mark
http://support.apple.com/kb/HT4359
Cheers,
Allen -
ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?
Welcome to the Apple community.
Unfortunately Office for Mac does not support the correct protocols to work with iCloud. -
I recently updated my iphone 3GS to iOS 5.0.1 software. After this was completed everything had been wiped from phone, all photos, apps, contacts, notes, calender. emails, music and settings. itunes wouldnt recognise my phone afterwards, but I have now been able to put back my photos, music and apps. Does anyone know how I can get my contacts, calender and email back please (notes would be good too!!). I didnt have icloud.
You should have been syncing all of this to your computer regularly.
Just sync it back. -
Problem in tutorial and zip file. can anyone file it or correct it..
hi jdev experts,
am using jdev11.1.1.5.0.
when am new to these webservice. i followed this tutorial
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_14/jdtut_11r2_14.html
url wsdl link when use that wsdl.
throws some error.
what is the reason john says. ok at second post of the thread.
Consuming a Web Service from a Web Page
so if i change the wsdl means and somethings has to be changed in tutorial steps.
if any newbie crossing this tutorials feels very difficult to work. so can change the wsdl url link and those steps.
and another thing I installed 11.1.2.0 and download that zip file in that tutorial and i run throws the same error.
so. problem in tutorial and zip file. can anyone file or correct..
i think think this is the right place to tell this. or else re-direct me.this is to arun.
As the exception stack clearly mentions that the endpoint is moved, it is up to the users to make use of any other webservice.trace says link is moved i know.
thing am here is:
please make note on that tutorials.
* note :- just like this consume some other external webservices. dont use this webservice this webservices link is broken.
this what saying.
this to john.
thanks. thanks again. -
Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?
All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then? -
My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it to show again? Recently rented a movie directly through apple tv but can't see the "movies" section in main menu now. WiFi and home sharing are working.
Welcome to the Apple Community.
Check the location setting for the iTunes Store is correct.
You might also try restarting the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
If you are still having problems try a restore.
Maybe you are looking for
-
AfterEffects CC crashes on Startup
Yesterday AE was working mostly fine; every hour or so it would crash. I'd start it up and it would work for another hour. This morning it was working fine for 5 minutes; I imported a .mov file and added it to the timeline and crash. Now it opens the
-
Source system in RSA1 is diiferent to the datasource in infoprovider
Dear Guru's I have created a quality source system in RSA1 tcode for client 210 but in my infoprovider it shows me of diiferent datasource ie for client 200 and i need this client to be 210 so kindly help me to resolve this issue Regards Mohammed
-
Experts, While clicking on Add in PO, one screen asking for project code, as if one parameterized query is executed at back end. Document getting added. and error comign 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]The conversion of a nv
-
No sound in QuickTime exported videos
Not sure if this should be posted in iTunes, but being as I used Quicktime to export as .mp4 and .m4v, it seems pertinent to post here. So I have a movie that is .mpg. I opened it in QuickTime and exported it as .m4v and then opened it in iTunes. The
-
Hi 1) WHY LSMW does not support call transaction method? 2) How to create one customer or one vendor with multiple bank details in LSMW?Is there any coding?What is it? Thank you