NL925: How do I fix my suddenly-stoped -working mi...

Hi everyone
I have been using my phone for more than 3 months now and today I took a video. To my surprise, there was no audio recorded. I tried using the Voice command (Long press Windows key) and it does not pick up my voice. I tried the voice option in the search, and I got the same result - no audio being detected.
When I call people, they could hear me. When I turn to speakerphone, that's when it stops working as well.
How do I fix this?
Thanks.
Solved!
Go to Solution.

Try soft resetting your phone by pressing volume down + lock key for about 10-15 seconds, until your phone vibrates and release the buttons, this will reboot your phone.
If this doesn't fix the problem, there may be a hardware failure, which means you may need to visit a nokia care center.
The silence will fall

Similar Messages

My ipods external speaker suddenly stoped working...when i go to music without d earphones plugged in it doesnt show me the voluve controler...

My ipods external speaker suddenly stoped working...when i go to music without d earphones plugged in it doesnt show me the voluve controler...

Try backing it up in iTunes, then restoring software. Back up first, though.
If problem is still there, then you may have to take this to a higher level. http://www.apple.com/support/ipodtouch/
If you STILL can't get an answer from those people, then go to an Apple Store and talk with a Genius

I just downloaded the new version of Firefox (ver 4). Now when I open Firefox I get the address bar but the information part of my screen is blank. This happens on all web sites. How do I fix this? IE works fine.

I just downloaded the new version of Firefox (ver 4). Now when I open Firefox I get the address bar but the information part of my screen is blank. This happens on all web sites. How do I fix this? IE works fine.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Equium A300d-13x - Media buttons suddenly stoped working

I am using an Equium A300d-13x toshiba laptop and the led media control touch panel suddenly stoped working
What shuld i do?

Hi
Did you install some 3rd party tools like Virtual Machine or Virtual PC or similar?
Such tools affect the multimedia buttons and could disable the functionality!
Otherwise there is something wrong with the operating system.
Possibly some registry keys or files are wrong, damage, etc
You could try to clean the OS using CCLeaner before you would install the VAP again.
This should be tried out.

Bluetooth suddenly stoped working how do i fix it?

yesterday my blue tooth suddenly stopped working, I accidently turned on airplane mode then turned it back off and ever since then I have not been able to turn it back on or connect my blue tooth speaker can anyone help me turn it back on i have windows
8.1 on a dell laptop and the bar to switch the blue tooth back on is all greyed out.

to be frank with you I don`t understand what is plug in or how to fix it or what is flash player and what is log in.You just help me or guide me how effectively i can use this.please

How do I fix colour picker to work across different colour-managed monitors?

Hey everyone!
I'm assuming this problem I'm having stems from having colour-calibrated monitors, but let me know if I'm wrong!
To preface, this is the setup I have:
Windows 7
3 monitors as follows, all have individual colour profiles calibrated using the Spyder 3
Cintiq 12WX
Dell U2410
Dell 2409WFP
Photoshop CS6 - Proofed with Monitor RGB, and tested with colour-managed and non-colour-managed documents
I usually do most of my work on the Cintiq 12WX, but pull the photoshop window to my main monitor to do large previews and some corrections. I noticed that the colour picker wouldn't pick colours consistently depending on the monitor the Photoshop window is on.
Here are some video examples:
This is how the colour picker works on my Dell U2410: http://screencast.com/t/lVevxk5Ihk
This is how it works on my Cintiq 12WX: http://screencast.com/t/tdREx4Xyhw9
Main Question
I know the Cintiq's video capture makes the picture look more saturated than the Dell's, but it actually looks fine physically, which is okay. But notice how the Cintiq's colour picker doesn't pick a matching colour. It was actually happening the opposite way for a while (Dell was off, Cintiq was fine), but it magically swapped while I was trying to figure out what was going on. Anyone know what's going on, and how I might fix it?
Thanks for *any* help!
Semi-related Question regarding Colour Management
Colour management has always been the elephant-in-the-room for me when I first tried to calibrate my monitors with a Spyder colourimeter years ago. My monitors looked great, but Photoshop's colours became unpredictable and I decided to abandon the idea of calibrating my monitors for years until recently. I decided to give it another chance and follow some tutorials and articles in an attempt to keep my colours consistent across Photoshop and web browsers, at least. I've been proofing against monitor colour and exporting for web without an attached profile to keep pictures looking good on web browsers. However, pictures exported as such will look horrible when uploaded to Facebook. Uploading pictures with an attached colour profile makes it look good on Facebook. This has forced me to export 2 versions of a picture, one with an attached colour profile and one without, each time I want to share it across different platform. Is there no way to fix this issue?
Pictures viewed in Windows Photo Viewer are also off-colour, but I think that's because it's not colour managed... but that's a lesser concern.

I think I've figured out the colour management stuff in the secondary question, but the weird eyedropper issue is still happening. Could just be a quirk from working on things across multiple monitors, but I'm hoping someone might know if this is a bug/artifact.
Going to lay out what I inferred from my experiments regarding colour management in case other noobs like me run into the same frustrations as I did. Feel free to correct me if I'm wrong - the following are all based on observation.
General Explanation
A major source of my problems stem from my erroneous assumption that all browsers will use sRGB when rendering images. Apparently, most popular browsers today are colour-managed, and will use an image's embedded colour profile if it exists, and the monitor's colour profile if it doesn't. This was all well and good before I calibrated my monitors, because the profile attached to them by default were either sRGB or a monitor default that's close to it. While you can never guarantee consistency on other people's monitors, you can catch most cases by embedding a colour profile - even if it is sRGB. This forces colour-managed browsers to use sRGB to render your image, while non-colour-managed browsers will simply default to sRGB. sRGB seems to be the profile used by Windows Photo Viewer too, so images saved in other wider gamut colour spaces will look relatively drab when viewed in WPV versus a colour-managed browser.
Another key to figuring all this out was understanding how Profile Assignment and Conversion work, and the somewhat-related soft-proofing feature. Under Edit, you are given the option to either assign a colour profile to the image, or convert the image to another colour profile. Converting an image to a colour profile will replace the colour profile and perform colour compensations so that the image will look as physically close to the original as possible. Assigning a profile only replaces the colour profile but performs no compensations. The latter is simulated when soft-proofing (View > Proof Colors or ctrl/cmd-Y). I had followed bad advice and made the mistake of setting up my proofing to Monitor Color because this made images edited in Photoshop look identical when the same image is viewed in the browser, which was rendering my images with the Monitor's colour profile, which in turn stemmed from yet another bad advice I got against embedding profiles . This should formally answer Lundberg's bewilderment over my mention of soft-proofing against Monitor Colour.
Conclusion and Typical Workflow (aka TL;DR)
To begin, these are the settings I use:
Color Settings: I leave it default at North American General Purpose 2, but probably switch from sRGB to AdobeRGB or ProPhoto RGB so I can play in a wider gamut.
Proof Setup: I don't really care about this anymore because I do not soft-proof (ctrl/cmd-Y) in this new workflow.
Let's assume that I have a bunch of photographs I want to post online. RAWs usually come down in the AdobeRGB colour space - a nice, wide gamut that I'll keep while editing. Once I've made my edits, I save the source PSD to prep for export for web.
To export to web, I first Convert to the sRGB profile by going to Edit > Convert to Profile. I select sRGB as the destination space, and change the Intent to either Perceptual or Relative Colorimetric, depending on what looks best to me. This will convert the image to the sRGB colour space while trying to keep the colours as close to the original as possible, although some shift may occur to compensate for the narrower gamut. Next, go to Save for Web. The settings you'll use:
Embed Color Profile CHECKED
Convert to sRGB UNCHECKED (really doesn't matter since you're already in the sRGB colour space)
and Preview set to Internet Standard RGB (this is of no consequence - but it will give a preview of what the image will look like in the sRGB space)
That's it! While there might be a slight shift in colour when you converted from AdobeRGB to sRGB, everything from then on should stay consistent from Photoshop to the browser
Edit: Of course, if you'd like people to view your photos in glorious wide gamut in their colour-managed browsers, you can skip the conversion to sRGB and keep them in AdobeRGB. When Saving for Web, simply remember to Embed the Color Profile, DO NOT convert to sRGB, and set Preview to "Use Document Profile" to see what the image would look like when drawn with the embedded color profile

The 'Yellow' Middle Round Button on the Upper Left Side of the Screen is no longer 'Yellow' and Nothing Happens when I pick it. How do I fix this so it works?

All three buttons used to have a color associated with them. Red (furthest left), Yellow (middle) and Green (right). Red shut down Firefox, Yellow hid Firefox from the screen and Green refreshed or enlarged the screen. Not only is the middle button no longer yellow, but when I pick it nothing happens. This started recently. How do I fix this?

Try to remove the Firefox plist file (org.mozilla.firefox.plist).
*http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)
See also:
*http://thexlab.com/faqs/repairprocess.html

How do u fix the keyboard not working issue on the new ios7

how do u fix the issue of the keyboard not working on the ios 7 OS? i experieced it on my MacBook Pro recently.

Briss wrote:
how do u fix the issue of the keyboard not working on the ios 7 OS?
iOS 7 is not a MBP OS.
i experieced it on my MacBook Pro recently.
Exactly what did you experience?
Ciao.

Appstore suddenly stoped working ONLY over wifi network in which worked before

I have an Ipad 3rd generation woth iOS6 which worked just fine untill today. Appstore suddenly stopped working over Wifi network (my home network). Untill yesterday it wokked just fine over the same Wifi. Anyway, Appstore still works over 3G thought.
I tryed to restart the modem, restarted the iPad ... it didnt work.
Any help is appreciated. thanks.

I have an Ipad 3rd generation woth iOS6 which worked just fine untill today. Appstore suddenly stopped working over Wifi network (my home network). Untill yesterday it wokked just fine over the same Wifi. Anyway, Appstore still works over 3G thought.
I tryed to restart the modem, restarted the iPad ... it didnt work.
Any help is appreciated. thanks.

How do I fix a suddenly dead slow iMac?

About 10 days ago my previously rock solid 2006 iMac began running dead slow. I mean open safari come back in 20 minutes and the window might be open slow. Since then, I've experimented with repairing the hard drive, repairing permissions, erasing the (internal) hard drive and reinstalling snow leopard, attempting to reload my data from an external drive using system restore, migration assistant, time machine, and drag and drop. Every time I get more than just the basic operating system on the hard drive, the system slows down again. I've also reset the PRAM several times. Does this sound like it could be anything but a hard drive failure?

annefrombath wrote:
Even with all the files loaded, I've used up only about 60% of the hard drive space. Another note... when I run the repair permissions diagnostic after adding additional files I get pages of things that required fixing. This is even if I've just copied one pages file from the backup. Not sure if this is relevant or not (maybe this happens all the time and I only just noticed it).
I still think it't the HD, if you have a copy of Disk Warrior I'd try using that. If you don't you can get a license or if you take it in for service either your local Apple Store or AASP will have a license.
As for the messages in Repair Permissions please read Disk Utility's Repair Disk Permissions messages that you can safely ignore

How do I fix my iMessage to work with my phone number?

Two days ago, my iMessage randomly decided to stop working. I am abroad in Asia right now so I have been using iMessage to keep in touch with friends and family at home (US) when I am connected through wifi.
My issue is that under the "Send and Recieve" in the iMessage settings, my phone number is not listed. Originally, it was greyed out and not selected but after going to an Apple store here and rebooting the settings, the phone number disappeared all together. I have turned off/on wifi, airplane mode, imessage, facetime, date/time, etc. I know the Apple ID is registered with my phone number because when I choose to sign out of my Apple ID and the sign back in under the iMessage settings, my phone number and email are selected to be used. But when I click Next, only my email is shown.
I will be abroad at least a few more weeks and would really like for it to work here again. I'm afraid it won't work when I'm back in the US as well. Any suggestions on how to fix this?

Correct, my cellular data is currently off. I don't think this will solve my problem because I was able to use iMessage before without my data and only on wifi. If nothing else works, I will try this. But I would like to try to find a solution that doesn't require me using data.

[SOLVED] I need some help fixing CUPS, it stoped working

hello i'm new here and have been trying to figure out what happended to cups. I installed Arch yesterday and after following the wiki, i had cups working and connected to my ubuntu server( where my printer is) i printed a test page and it was working. this morning cups is not working anymore, i had turn off my computer. the cupsd daemon is in my rc.conf file, but when i do
/etc/rc.d/cupsd restart i get the following:
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 38: stat_busy: command not found
/etc/rc.d/cupsd: line 44: stat_fail: command not found
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 15: stat_busy: command not found
/etc/rc.d/cupsd: line 21: /usr/sbin/cupsd: Permission denied
/etc/rc.d/cupsd: line 24: stat_fail: command not found
i don't know how to fix it. when i go to http://localhost:631 i'm unable to connect.
this is my /etc/rc.conf :
# /etc/rc.conf - configuration file for initscripts
# Most of rc.conf has been replaced by various other configuration
# files. See archlinux(7) for details.
# For more details on rc.conf see rc.conf(5).
DAEMONS=(syslog-ng network crond sshd acpid dbus alsa cupsd)
# A reasonable DAEMONS array when using sysvinit is:
# DAEMONS=(syslog-ng network crond)
# When using systemd, it is recommended to only enable daemons that
# do not have native systemd service files.
# Storage
# USEDMRAID="no"
# USELVM="no"
# Network
interface=eth0
address=
netmask=
gateway=
# Modules
MODULES=(fglrx dbus pulseaudio equalizer microcode)
I can post anything you guys need me to post here, sorry if its not enough information, i'm still new to linux all together. thanks for the help.
Last edited by lazarojhr16 (2012-10-22 17:06:00)

bhrgunatha wrote:
lazarojhr16 wrote:
pulce wrote:
I see on the home page that new installation use systemd by default. Try
# systemctl start cupsd.service
Ok that worked. So this means I'm using systemd. Now my question would be how can i make it start on boot because i have the cups daemon (cupsd) on the rc.conf file. but it doesn't start on boot. Thanks for all the help.
To get it to start on boot run:
systemctl enable cupsd
or if that doesn't work
systemctl enable cups
For some reason on my system I have to use cups NOT cups**d**
thank you. After reading up on systemd I did systemctl enable cupsd and is not working, you saved the day, the second one works (using cups not cupsd)

How do I fix Graphics don't work on FF 11.0 on Win 7?

After upgrading to FF 11.0 and RoboForm v7.7.4 graphics do not show up on my screen in Yahoo or MSN. I don't know where the problem is or how to fix it. Do you?

So, do you mean that Images on certain websites aren't appearing? Let's try a few things that might help.
First, try clearing your cache ([[How to clear the cache|How to clear the cache]]). Firefox stores temporary copies of frequently visit websites to your computer to speed web browsing, but that store sometimes doesn't work properly. Clearing it will help us determine if there is an issue there or not.
If that doesn't work, the article [[Websites look wrong|Websites look wrong]] has several steps you can take to try to resolve your issue.
Let me know if this helps.

Nothing firefox is starting, how can i fix it if nothing works?

recently my firefox wont start even though every other browser works fine. i've tried the fixes here but no form of firefox program will start and task manger doesnt show them. i've tried uninstalling and clearing the appdata and still nothing. nothing seems to be fixing the problem even at a fresh start.

Hello gerardito,
They will not buy it. The most they will do is offer you a 10% discount towards the purchase of a new iPod Touch if you are willing to trade in the old one.
You can choose to have it repaired by Apple or a third party company if you wish.
B-rock

TS3074 windows tells me that framework 4.0 already install, it doesn't give the option to repair the file, resulting of no option to do anything else? what should i do, how i can fix this itune 2 work, yesterday it works fine but when i came 2 install upd

what should i do??
give me message error 7 for itune and error message 126 for windwos works fine until i did updates yesterday.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

NL925: How do I fix my suddenly-stoped -working mi...

Similar Messages

Maybe you are looking for