NLAG material to be add in BOM.

*Dear PP gurus,*
*have a nice day.*
*pls help me for adding the Nlag material in CS02 - BOM.*
*Rgds.*
*Muthu*

>
muthukg wrote:
> *Dear PP gurus,*
>
> *have a nice day.*
>
> *pls help me for adding the Nlag material in CS02 - BOM.*
>
>
> *Rgds.*
> *Muthu*
Muthu,
You can add the NLAG material with Item category - N. You need the purchasing data in the Item level details.
Regards,
Prasobh

Similar Messages

  • Material to be add in Bom

    Dear Experts
    I want upload the one material with movement type 531(bi-product) with qty in each and every semifinished product but there are nearly about 1400 materials is there How can i add this material in bom for every semifinished product. I checked in CS20 but not adding
    please support me as early as possible
    regards
    raz

    Hi,
    As Mohammed suggested, you can go to CS20, enter the reference material as a material which is available in all 1400 material BOMs.
    For example you have BOM for Semi finished materials SFG 1 to SFG 1400, in all the material bom you got a raw material R001. Now you need to insert a mateiral M001 to all the BOMs,
    In CS20, enter the reference material as R001and in the new material field enter M001, qty (negative since it is a byproduct) and enter ther item categroy as L and item number as 0200 (since if you ive 0010 or 0020, it will replace the existing material in the item number) so give a largest item number.
    Then execute.
    Try in sandbox.
    thanks,
    JK

  • ADD NEW BOM

    Dear gurus,
    I have one doubt pls guide me,  In One FG i have 5 altenative BOMs when i add new BOM (item ) has to be added in more than one BOM in  single transaction
    Currrently total replacement of material is possible thr CS20 ,but i need  to add new material in all BOM in single transaction
    pls check it
    Regards
    s.sakthivel

    Hi sakthivel,
    Use T code CS20 and select the option 'Add material' in the item changes. also specify a reference material that is available/common accros all BOMs where you need to add the new item. Specify the item category, quantity and line number where you want it inserted.
    Make sure the UOM will match with the master data records. on execution, you will get a list of all BOM's where the reference material is used, select the ones you need the new item for and select 'Add material'
    Hope this helps.
    Regards,
    Pradeep.

  • Functinality to compare two material price with reference to BOM in CO

    Hi All,
    Is there is any functionality in Controlling which can compare the costing for two FERT materials.
    or
    is there is  any functionality where we can compare two material price with reference to BOM in controlling
    Please help me to compare the material price with reference to BOM
    Regards
    nandu

    Hi,
    You can use this report to compare two itemizations. The report compares the characteristics item number, item category, cost element, resource, material, cost center, plant/work center, cost center/activity type, operation number, BOM item, assembly indicator, and cost component.
    You can access this report as follows:
    Accounting ® Controlling ® Product Cost Controlling ® Product Cost Planning ® Material Costing ® Cost Estimate with Quantity Structure or Cost Estimate Without Quantity Structure ® Compare
    or
    Accounting ® Controlling ® Product Cost Controlling ® Product Cost Planning ® Information System ® Object Comparisons ® For Material ® Itemization Comparison.
    For Detail Please reffer following link:
    http://help.sap.com/saphelp_46c/helpdata/en/56/abd108f1a611d28a950000e8214595/content.htm
    Thanks and Regards
    Binoj M D

  • How do i get a Base code (Material) from a description through BOM?

    Hi,
    the right base code(material) for the production order '68647' is 100827 descriotion 'PIPE BASIC' .
    my requirement is i have an production order and relevent plant, how do i get a basecode ?
    from my previous finding i read that All BOMs will have are associated with the description.
    Targeting this description will always return the right base code for the order.
    but i did not get any idea out of it.
    Please tell me how do i get a Base code (Material) from a description through BOM?
    Thanks in advance.
    Edited by: gulab zehra on Sep 22, 2009 9:17 AM

    Hi Keven,
    I had a look at the example "programmaticbuild2.vi" that you can find at this link:
    in this application the error that eventually comes out from the "BuildTargetBuildSpecification.vi" is written in the error_log.txt through a case structure.
    You can change the code inside the Error case if you want to handle the error in a different way. For example you could connect the error wire to a General Error Handler, that displays a message if an error occurs, or you could light up a led that inform you the error has occurred.
    Best regards,
    Serena M.

  • Material is there in the BOM still no reservation.

    Hi ,
    I have created planned order. According to planned order material is there in the BOM.
    Still no reservation happened.
    Can you please tell me what all the possible reasons for this?
    Regards,
    Amit

    Hi Amit,
    Planned order is a planning document which will schedule the job, checks the capacity, BOM items stock but it will not create any Reservations for the BOM items.Reservation Number for the BOM items will be generated only after release of production order.
    First convert the planned order to production order and then release the production order. Then you can see reservation number in the Production Order. Go to Tcode MB23 and enter the Reservation number which you see in Production Order then system will desplay all reserved Bom items and there stock. If u want to confirm this again go to Tcode MMBE and enter the Bom item number where system will display the reserved stock of that component. Once you make confirmation of the order the stock of the reserved bom items will be reduced.
    Ramagiri Srinivas

  • Material Description not Showing in BOMs

    Hi ,
        Material Description not Showing in BOMs but we maintained the description in Materal Master.

    Ltawada,
    Then it must be a SAP-Program error. Look for OSS notes for this problem, shall let you know the number If I find.
    Regards,
    Prasobh

  • Material Determination in Sales Order BOM

    Dear Gurus,
    We would appreciate any solutions and/or suggestions you can provide for our problem below:
    Background:
    Part XYZ is a sales BOM which contains 3 components: A, B, and C.  Component B has a material determination (product substitution/interchange) with material B1, B2 or B3. 
    Requirement:
    When a customer orders part XYZ, and if component/material B is not available in stock/shortage, then any or all of the product interchanges may be used to fulfill the order until the full order quantity is confirmed.
    Problem:
    We are able to explode the BOM to its components but unable to generate the product interchanges for component B in the sales order. 
    Could you please help?  Thank you very much.
    Best regards,
    Michael SA

    SAP Note 486680
    SAP Note 549341
    Please check the above notes.
    Regards
    Sai

  • Material cost estimate using recursive BOM

    Hello everybody.
    I want create material cost estimate (CK11N) using a recipe with recursive BOM. When I execute the transaction CK11N the following message is display Costing of cycle 00001 does not converge
    Do you know what is missing?
    Thanks in advance.

    Dear,
    Message no CK740?
    Please do check the link below......
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/f8/a3e333bf3d11d189900000e8214595/content.htm
    and OSS note : 858384
    Regards,
    R.Brahmankar

  • How to get currently logged in user on 'Bill of Material' Form in Add-Mode

    Dear All,
                    I am using a UDF on 'Bill of Material' Form in SAP. This UDF is named as Current_User. I want in this UDF the user name that is currently logged in to SAP. I am able to get user name at form load event. But when 'Bill of Material' Form comes in ADD Mode, the user name doesn't display. What can I do for this problem.? Here is my code:
    public override void Handle_SBO_ItemEvent(string FormUID, ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
                BubbleEvent = true;                 
                try
                    if ((mst_FormUIDModal != null))
                        if (FormUID != mst_FormUIDModal)
                            bool dbo_FormFound = false;
                            foreach (SAPbouiCOM.Form dsa_Form in this.SBO_Application.Forms)
                                if (dsa_Form.UniqueID == mst_FormUIDModal)
                                    if (FormUID != mst_FormUIDModal)
                                        if (this.SBO_Application.Forms.Item(mst_FormUIDModal).Selected == false)
                                            this.SBO_Application.Forms.Item(mst_FormUIDModal).Select();
                                        BubbleEvent = false;
                                        return;
                                    dbo_FormFound = true;
                            if (!dbo_FormFound)
                                this.mst_FormUIDModal = null;
                    if (pVal.BeforeAction == false)
                        switch (pVal.EventType)
                            case BoEventTypes.et_FORM_LOAD:
                                    if (pVal.FormType == -672)
                                        Program.Curr_User = SBO_Company.UserName;
                                        doc_form = this.SBO_Application.Forms.GetForm(pVal.FormType.ToString(), pVal.FormTypeCount);
                                        ((SAPbouiCOM.EditText)doc_form.Items.Item("U_User").Specific).Value = Program.Curr_User;
                                } break;

    Hi,
    You need not to write any sdk code for this task. You just create a user query as mentioned above and save it with some name.
    Then Open the Bill Of Material Screen, just click in the required field, then click alt + shift + f2 to assign a Formatted Serach.
    Then Select 3 rd Option       "Search in Existing User-Defined Values According to Saved Query"
    Then Click on the button "Open Saved Query"
    It will open the Query Manager. Select the Saved Query.
    Enable the Option "Auto Refresh When Field Changes"
    In the Drop Down list, select the Value "Parent Item"
    Then Select the Option Refresh Regularly or Display Saved Values.
    This will automatically put the user code if the parent item is selected.
    You an achieve this by without SDK Code.
    PS:
    There is a change in the Above Query:
    Select USER_CODE from ousr where userid = $[USER]
    Edited by: Manikandan K on Dec 22, 2011 2:00 PM

  • How to find out whether material is tie to a BOM

    Hi everyone,
    I would like to know how do i find out whether a particular material is tied to BOM (as in is it part of a BOM structure)?

    Hi Bernard,
    You can use this FM <b>CS_WHERE_USED_MAT</b>.
    call function 'CS_WHERE_USED_MAT'
      exporting
       datub                      = sy-datum
       datuv                      = sy-datum
       matnr                      = wa_matnr
       werks                      = wa_werks
      importing
        topmat                     = i_topmat
      tables
        wultb                      = i_wultb
        equicat                    = i_equicat
        kndcat                     = i_kndcat
        matcat                     = i_matcat
        stdcat                     = i_stdcat
        tplcat                     = i_tplcat
      exceptions
        call_invalid               = 1
        material_not_found         = 2
        no_where_used_rec_found    = 3
        no_where_used_rec_selected = 4
        no_where_used_rec_valid    = 5
        others                     = 6.
    Hope this will help.
    Regards,
    Ferry Lianto

  • OCM for Revesion level in the Material Master and for the BOM

    Hello,
    I use My SAP 6.
    I have implemented OCM. It's used for 2 things:
    - The first is for revision level in the Material Master.
    - the second is for the BOM.
    Today, the customizing is good, it's work.
    My need is to have the same change number for those 2 evolutions:  for the material master evolution and for the BOM evolution.
    It's possible, and how?
    Thanks for your answers.
    Bérenger

    I do not think this is possible. Service level is usually used for safety stock planning.

  • Material type error related to BOM

    Dear friends,
    I have created a Z material type and for the same I am creating a BOM, now it is giving the error material type Zu2026 is not supported by BOM, please tell me how to resolve the same.
    Regards,
    Mohan.

    Dear Balu,
    Path
    SPRO -> Production -> Basic data -> Bill of material -> General data -> define materials type allowed for BOM header
    T-code - OS24
    Here sepecify BOM Usage, youre materail type make + symbol for allowed option
    Regards
    Madhu Kumar

  • Multiple Material Selection linked to Equip BOM

    Dear Experts,
    We have Equipment BOMs.
    Now there is a requirement during Material selections in From To fields, that if I select the option 'Material by Equipment BOM' the list of materials under that particular Equip BOM should appear. (Exactly the way 'Material by Material Group' etc do) for this I need to have the above option in the Menu. i.e. Material by Equipment BOM.  How do I achieve this?
    Kindly help.
    Regards
    Jogeswara Rao

    Hi ,
    It might be not possible
    but you can try   copy from equipment bom
    Regards
    Jitender

  • Distribution of material cost wihich dosent come BOM

    My client is producing bicycle. In this process first production process is degreasing.
    In degreasing process small pipes (used for creation of  bicycle frames) will be cleaned using few chemicals.
    The pipes are different sizes. Different sized pipes will be used for different small, big bicycle production.
    Now my problem is how can I distribute that cost of chemical for small, big pipes to find out production cost at that stage in sap.
    (In company this cost will be distributed on the base of surface of pipe or frame )
    thanku

    j

Maybe you are looking for