NLB converging problem VM1 on 2008R2-host VM2 on 2012R2-host

Hello
We are in the process of uppgraring our Hyper-V enviroment from 2008 R2 to 2012 R2.
We migrate the VM's from 2008 to 2012 on volume at a time and now I have run into a problem with NLB between
two VM's, VM1 is on 2008-host and VM2 is migrated to 2012-host. Both VM's run OS 2008 R2.
The migration steps we use is:
Stop the VM on 2008-host
Copy VHD to 2012 Cluster storage
Create new VM on 2012-host (from Failover Cluster Manager)
On VM2 I added a second NIC and set the same IP as the original.
I have Enabled MAC adress Spoofing and tried setting a static MAC on the NLB NIC but without any luck.
But the VM is stuck in status Converging.
I have read most threads I can find on this issue and tried most suggested solutions.
My question now is if there are any problem in running NLB on VM's when they are on different Hyper-V versions (2008R2/2012R2, both is Datacenter Edition)
/Anders

Hi,
Which NLB mode you are using? If you are using the IGMP mode you need to configure your switch to allow the NLG data through.
The similar thread:
about-nlb-multicast-mode-and-igmp-multicast-mode
http://social.technet.microsoft.com/Forums/windowsserver/en-US/db4a53c7-bbc4-49c7-a0bb-97658259ef3f/about-nlb-multicast-mode-and-igmp-multicast-mode
The related KB:
http://technet.microsoft.com/en-us/library/cc731616.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Printing problems on Server 2008R2 - Server 2012R2

Hi,
We have troubles with Firefox and printing pages.
First i want to say i have already tried all this steps:
https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox
Let me explain my problem:
In a TerminalServer Session i want to print a website from firefox.
Sending the print job in Firefox works without error reports, but then the printer "Data" lamp is blinking and the printer Says proccessing.
First i thought the printer has been broken but then i tried this on 6 other printers in our company.
Printers: HP, Sharp, Brother, Develop.
Every Printer has the same problem. No one could print anything anymore. I had to turn off the printers to get them working again.
Resetting the about:config -> print_printers was not working, after this the printer was printing one Job then the problem was there again.
I also have deleted the profile in AppData, but this has not resolved the problem.
So can you please tell me what the problem is?

Hi,
The Dump File has abaout 290mb, what should i do with that file?
The Machines are running on 2 different Hyper-V 2012R2 Hosts,(1 HP Server and 1 Supermicro Server, Intel Xeon 2620V2) the latest Integration Services Drivers on the guest machines are up to date.
This is the printing Problem:
Firefox sends the Webpage to the Printer. After a short time the printing Job is cleared from the list of actual Jobs.
The Printer Says now he got a Job an says "Processing...", well.. this happens by every printer in our Company.
Only turning off the Printer and on again makes the Printer working again to print anything from other programs.
At the moment where someone sends a print Job from Firefox (Problem exists only on TerminalServers 2008, 2008R2, 2012, 2012R2.) to any Printer, the Printer must be restarted to work again.
Printing from Server 2003R2 works.

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

Terminal & Ext. Drive Problem - Will Give 6 MO. FREE Web Hosting For Result

Thank you for reading this! I am having a problem with an external drive, which has pictures and files that I use and need! I figured terminal would be the easiest way to fix this, but if someone knows another way to fix it, feel free to suggest that. I am willing to give 6 months of free web hosting from my company to the person who gives me full direction and a working answer to my question.*
HISTORY: On my iMac G5 I use an external hard drive to store files and pictures, etc. This drive has two (2) partitions. I named one partition "Backup" and the other "The Drive". For some reason, unknown to me, my computer renamed "The Drive" to "The Drive 1". I have used this drive for quite some time with no problem at all, but then...
I needed to let someone else use the computer but did not want them to have access to the "The Drive 1" partition. So, I went into "Get Info" for this partition and selected "No Access". It worked fine, not able to access.
When I went to change the permissions back, this particular partition was not available. I saw the "Backup" partition but not "The Drive 1". I tried unplugging and plugging back in the external drive, but still only see the "Backup" partition. In "Disk Utility" I see both partitions, but the button "Verify/Repair Disk Permissions" are gray-ed out (not available). I called Apple's Wonderful Tech Support who went above and beyond to help me out with this issue, but they said it was not something they cover in support.
I am looking for someone with the skill of being able to use Terminal very well. I will provide all information needed to figure out a result to this issue.
In Terminal I was stuck after I typed "cd /Volumes" and "ls -l". I saw the "Backup" partition and "The Drive 1" partition. "Backup" had this "drwxrwxr-x" and "The Drive 1" had this "d---rwxr-x". I understand that "d" is directory and what "r" "w" and "x" mean, but I do not know how to fix it from here. Apple suggested to try "chmod 775 /TheDrive1" or "sudo chmod 775 /TheDrive1" but it only resulted in: "chmod: /TheDrive1: No such file or directory". Please figure something out, I need these files. Thank you. And also, if you know another way to fix this without terminal that is fine as well, i just assumed that it would be easiest this way.
Thanks again!
Thank you all so much!
*I will give the 6 months free as long as the answer is fully answered, and fixes my problem. If more than one person answers correctly, only the first will receive the hosting. Do not think this is a joke, I will give the hosting, but not if I get bad or incorrect information. Also, this "free hosting" will be for hosting through my company (HyperlinkMe.com) and not money for hosting of your choice. If I figure out the problem, I will try to post it as soon as possible. The web hosting package you recieve will be 1 gigabyte of disk space and 15 gigabytes of data transfer. This is limited to six months from day of setup, but can be extended by paying regular $9.95 monthly fee. Thanks again!
iMac G5 Mac OS X (10.4.3)

Yes it did work. It was a million times easier than I expected and I got a response a million times faster than I would have ever expected. Thank you soo soo much. This is amazing, a miracle... not to get to crazy now, but I truly thank you with so much thanks. Ok, I guess if you do not need any web hosting, I must repay you some how. So, if you need any help with a website, or any questions at all I would be more than willing to help.
Once again thank you! I called Apple twice and they went beyond support in trying to help me, but they said nope, we can't. So I came to the discussion forum this afternoon and in less than 2 hours I signed up, posted my question, got a response, and had my issue solved! Thank you so much. And please, please take me up on the offer to help, it is the least I can do.

Converting Debian 7 ESXi 4.1 to 2012R2 host :

Hi,
I'm trying to convert Debian 7 VM to hyper-v using MVMC 2.1. In GUI wizard on Virtual Machine section, under Operating System there is shown Other Linux (x64) instead of Debian 7. Debian version 5 is show correct (for olders dis. VM), as Debian GNU/Linux
5 (x64). I suppose that is reason for Warning on Summary screen in Wizard :
Warning (s):
1. The operating system of the VMWare VM is NOT SUPPORTED. This does not prevent conversion, but no support is provided for this conversion.
The tool is running on target Hyper-V 2012R2 host with .NET 4,5 installed along with Visual C++ Redist 2012 update.
After continuing conversion (ignorring the warning above), conversion stops after sucessfuly snapshot creation on ESXi host with following error :
"One or more errors occurred. ---> System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.Accelerators.Mvmc.ScxSshWrapper_x86.dll' or one of its dependencies. The specified module could not be found."
I also reboot Hyper-V host but same error appears every time .
Thnx.
Update#1: I have to install both x64 and x86 Visual Studio Redist 2012 Update 4 to avoid stop error on .dll. The main warning (VM not supported stays).
Now I have new problem, during Uninstall Tools step conversion stops with message: Host does not Exist. When open error log: there is :
VERBOSE:   Attempting to establish an SSH connection.
07/23/2014 17:06:56 +02:00 [3] VERBOSE:   Finished creating snapshot of the source virtual machine
07/23/2014 17:06:59 +02:00 [3] DEBUG:   Caught ManagedSshFacadeException trying to open SSH connection: ErrorCode=0xC0040202, Message=Host does not exist
07/23/2014 17:07:04 +02:00 [3] VERBOSE:   System.AggregateException: One or more errors occurred. ---> Microsoft.Accelerators.Mvmc.ScxSshCommon.ManagedSshFacadeException: Host does not exist
Update#2: Host unknown error was because Debian wasn't in internal DNS of Hyper-V host, after adding Linux to DNS error went away (it seems to use DNS name to establish SSH connection). However after that I received errors in same "Uninstall Tools"
step about connection rejected because of too many failures for root account... I saw that in the "Connection Step" of wizard I was unable to enter Password for Root account for selected VM, (I don't know is that by design for Linux VM's). So I beleive
that error is reffering to that stage of setup. Anyhow I decided to manually remove VM Tools , shutdown VM and convert VM in offline mode. Now VM is working on Hyper-V, and I hope that this few hours of troubleshooting will help someone. After all there
are still some questions :
1. Why Warning : 1. The operating system of the VMWare VM is NOT SUPPORTED - is displayed for Debian 7 which is on supported list of guest OS
2. Why online conversion didn't work, and why password for root account in VM (under Connection portion of wizard) could not be entered.
If anyone have answers to above question please share your knowledge.
Regards,

MVMC 3.0 did not include any new features for Linux so I doubt the results will be different. We did add support for RHEL 7, CentOS 7 and Oracle 7.
For your questions:
1 - Since VMWare does not have a specific choice for Deb 7, newer versions may by now, we throw the warning as we cannot determine what version of Linux you are trying to convert when you select [Other Linux X64]. Deb 7 is supported by MVMC as
we've tested it and know it works. Other Linux distros may work as well that are not supported but they have not been tested.
2 - Most likely you did not have the VMWare VM running when trying to do the online conversion or it could not be resolved in DNS by the vSphere server. When running the MVMC tool did you notice if it had a DNS name associated with it when you selected
it in VMWare?
The MVMC requires the VMWare VM to be in a running state and resolvable in DNS by both the MVMC system and the VMWare vSphere server to verify the root password and remove the VMWare tools. As you have stated, you can remove the VMWare tools manually
and run the MVMC and it will work as well. If you leave the VMWare tools installed and do the conversion we disable the VMWare tools on the Hyper-V VM once booted. They are still there but should not be in a running state and you can remove them if desired
at this point.
Regards,
-Steve

Unknown Host sidhost (see /etc/hosts)

Hi experts,
    I'm facing a problem in maxdb please help us the issue
Error:
starting database instance ...
Error! Connection failed to node devhost for database DEV:
unknown host devhost (see /etc/hosts)
Opening Database...
Error! Connection failed to node devhost for database DEV:
unknown host devhost (see /etc/hosts)
connect to the database to verify the database is now open
dbmcli check finished with return code: 0
database start failed

Hi Deepak,
                   This is the DBM.PRT log file.
'db_warm' is being executed.
2014-02-28 09:50:00       4993 INF          1 DBMKnl   Sending an administrative statement to the database DEV on computer localhost
                          4993 INF          8 DBMKnl   Statement: RESTART
2014-02-28 09:50:50       4993 INF          3 DBMKnl   Received the result of an administrative statement from the database DEV on computer localhost
                          4993 INF          9 DBMKnl   Statement: RESTART
                          4993 INF         10 DBMKnl   Returncode: 0
2014-02-28 09:50:59       4993 INF        419 DBMSrv   Command 'db_warm' has ended with return code 0.
2014-02-28 09:50:59       4993 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 4991 on computer transids.transaltus.com).
2014-02-28 09:59:35       7407 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-02-28 09:59:35 (client process has process ID 7194 on computer transids.transaltus.com).
2014-02-28 09:59:36       7407 INF        283 DBMSrv   Command 'dban_start ...' is being executed.
2014-02-28 10:00:41       7407 INF        419 DBMSrv   Command 'dban_start' has ended with return code 0.
2014-02-28 10:16:57       7407 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 7194 on computer transids.transaltus.com).
2014-02-28 17:55:12      14698 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-02-28 17:55:12 (client process has process ID 14696 on computer transids.transaltus.com).
2014-02-28 17:55:12      14698 INF        283 DBMSrv   Command 'dban_stop' is being executed.
2014-02-28 17:55:14      14698 INF        419 DBMSrv   Command 'dban_stop' has ended with return code 0.
2014-02-28 17:55:14      14698 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14696 on computer transids.transaltus.com).
2014-02-28 17:55:15      14724 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-02-28 17:55:14 (client process has process ID 14722 on computer transids.transaltus.com).
2014-02-28 17:55:15      14724 INF        283 DBMSrv   Command 'db_cold' is being executed.
2014-02-28 17:55:15      14724 INF          1 DBMKnl   Sending an administrative statement to the database DEV on computer localhost
                         14724 INF          8 DBMKnl   Statement: SHUTDOWN
2014-02-28 17:55:15      14724 INF          3 DBMKnl   Received the result of an administrative statement from the database DEV on computer localhost
                         14724 INF          9 DBMKnl   Statement: SHUTDOWN
                         14724 INF         10 DBMKnl   Returncode: 0
2014-02-28 17:55:30      14724 INF        419 DBMSrv   Command 'db_cold' has ended with return code 0.
2014-02-28 17:55:30      14724 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14722 on computer transids.transaltus.com).
2014-02-28 17:55:30      14769 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-02-28 17:55:30 (client process has process ID 14767 on computer transids.transaltus.com).
2014-02-28 17:55:30      14769 INF        283 DBMSrv   Command 'db_offline' is being executed.
2014-02-28 17:55:32      14769 INF        419 DBMSrv   Command 'db_offline' has ended with return code 0.
2014-02-28 17:55:32      14769 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14767 on computer transids.transaltus.com).
2014-03-03 09:19:32       4829 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 09:19:32 (client process has process ID 4827 on computer transids.transaltus.com).
2014-03-03 09:19:32       4829 INF        283 DBMSrv   Command 'db_clear' is being executed.
2014-03-03 09:19:32       4829 INF        419 DBMSrv   Command 'db_clear' has ended with return code 0.
2014-03-03 09:19:32       4829 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 4827 on computer transids.transaltus.com).
2014-03-03 09:19:32       4834 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 09:19:32 (client process has process ID 4832 on computer transids.transaltus.com).
2014-03-03 09:19:32       4834 INF        283 DBMSrv   Command 'db_start' is being executed.
2014-03-03 09:19:47       4834 INF        419 DBMSrv   Command 'db_start' has ended with return code 0.
2014-03-03 09:19:47       4834 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 4832 on computer transids.transaltus.com).
2014-03-03 09:19:47       4879 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 09:19:47 (client process has process ID 4877 on computer transids.transaltus.com).
2014-03-03 09:19:47       4879 INF        283 DBMSrv   Command 'db_warm' is being executed.
2014-03-03 09:19:47       4879 INF          1 DBMKnl   Sending an administrative statement to the database DEV on computer localhost
                          4879 INF          8 DBMKnl   Statement: RESTART
2014-03-03 09:20:41       4879 INF          3 DBMKnl   Received the result of an administrative statement from the database DEV on computer localhost
                          4879 INF          9 DBMKnl   Statement: RESTART
                          4879 INF         10 DBMKnl   Returncode: 0
2014-03-03 09:20:50       4879 INF        419 DBMSrv   Command 'db_warm' has ended with return code 0.
2014-03-03 09:20:50       4879 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 4877 on computer transids.transaltus.com).
2014-03-03 09:39:11       7414 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 09:39:10 (client process has process ID 7098 on computer transids.transaltus.com).
2014-03-03 09:39:11       7414 INF        283 DBMSrv   Command 'dban_start ...' is being executed.
2014-03-03 09:40:01       7414 INF        419 DBMSrv   Command 'dban_start' has ended with return code 0.
2014-03-03 09:41:13       7414 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 7098 on computer transids.transaltus.com).
2014-03-03 17:44:38      14827 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 17:44:38 (client process has process ID 14825 on computer transids.transaltus.com).
2014-03-03 17:44:38      14827 INF        283 DBMSrv   Command 'dban_stop' is being executed.
2014-03-03 17:44:40      14827 INF        419 DBMSrv   Command 'dban_stop' has ended with return code 0.
2014-03-03 17:44:40      14827 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14825 on computer transids.transaltus.com).
2014-03-03 17:44:40      14853 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 17:44:40 (client process has process ID 14851 on computer transids.transaltus.com).
2014-03-03 17:44:40      14853 INF        283 DBMSrv   Command 'db_cold' is being executed.
2014-03-03 17:44:40      14853 INF          1 DBMKnl   Sending an administrative statement to the database DEV on computer localhost
                         14853 INF          8 DBMKnl   Statement: SHUTDOWN
2014-03-03 17:44:44      14853 INF          3 DBMKnl   Received the result of an administrative statement from the database DEV on computer localhost
                         14853 INF          9 DBMKnl   Statement: SHUTDOWN
                         14853 INF         10 DBMKnl   Returncode: 0
2014-03-03 17:45:00      14853 INF        419 DBMSrv   Command 'db_cold' has ended with return code 0.
2014-03-03 17:45:00      14853 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14851 on computer transids.transaltus.com).
2014-03-03 17:45:00      14902 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 17:45:00 (client process has process ID 14900 on computer transids.transaltus.com).
2014-03-03 17:45:00      14902 INF        283 DBMSrv   Command 'db_offline' is being executed.
2014-03-03 17:45:01      14902 INF        419 DBMSrv   Command 'db_offline' has ended with return code 0.
2014-03-03 17:45:01      14902 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14900 on computer transids.transaltus.com).

Sshd ignores /etc/hosts.allow and /etc/hosts.deny

Hello everyone,
I've just found out that sshd ignores /etc/hosts.allow and /etc/hosts.deny completely on my machine. It doesn't make use of tcp_wrappers. I am using the standard Arch package. Either my settings are wrong, or this is a severe security problem. It was a terrible surprise to find out that my server is under severe dictionary attacks all the time, despite the denyhosts script I am using.
These are my settings:
/etc/hosts.deny:
ALL: ALL
/etc/hosts.allow:
# some nfs daemons: 192.168.1.0/255.255.255.0
sshd sshd1 sshd2: ALL EXCEPT /etc/hosts.evil
mysqld: 192.168.1.0/255.255.255.0
/etc/hosts.evil:
195.113.21.131
60.10.6.53
A simple experiment to verify the settings:
[root@charon etc]# tcpdmatch -d -i /etc/xinetd.conf sshd 195.113.21.131
warning: sshd: no such process name in /etc/xinetd.conf
client: address 195.113.21.131
server: process sshd
matched: hosts.deny line 5
access: denied
[root@charon etc]# tcpdmatch -d -i /etc/xinetd.conf sshd 195.113.21.130
warning: sshd: no such process name in /etc/xinetd.conf
client: address 195.113.21.130
server: process sshd
matched: hosts.allow line 10
access: granted
This seems to be fine. But when I go to the machine 195.113.21.131, I can simply log in with no trouble at all.
This is really strange. Does it have something to do with the xinetd warning? I am not using xinetd... Maybe I'm doing something wrong. If you have experienced such a trouble, please give me a hint.

elasticdog wrote:So should our package not have the ListenAddress 0.0.0.0 line uncommented by default? My guess would be that since it listens on all local addresses by default, we're just overwriting that when specifying 0.0.0.0, which isn't valid. That was users don't have to specify their local IP address. Unless I'm wrong, shouldn't this be a bug/feature request for the packager?
This doesn't seem to be a package bug... IMHO, sshd must respect all the settings in hosts.deny and hosts.allow, regardless the IP address it listens on. The behaviour I noticed seems to be much more complicated. Basic settings (daemon name mentioned in hosts.*) worked, as far as I didn't want a "per IP" configuration. For example, including the daemon in hosts.allow really enabled remote connections, but any closer specifications (subdomains, EXCEPT operator...) were ignored. Access was simply granted without further evaluation. Excluding sshd from hosts.allow worked as one would assume. When I specified ListenAddress, everything started to work properly. This is mysterious. There are millions of computers using tcp wrappers and ssh, so it's hard to believe there could be a bug.

Communication from the Oracle Mngt service host to the agent host failed

Hi There,
I have installed Oracle 10.2.0.1 Grid software on a Solaris Zone. I plan to upgrade it to 10.2.0.5 very soon but would like to test the agent connection from a remote server first. I installed agent version 10.2.0.5 on the remote server. When I log into the oracle grid GUI I can see the host called "localhost" (this is not the correct name. It should be the server name) and the database instances on that server. However, when I select the localhost and press the configure button I get the following message:
Communication from the Oracle Mngt service host to the agent host failed. Refer to help for details localhost:cn=servername
The system administrators changed the /etc/hosts file to make sure the server was listed first fully qualified. For example: servername.domain.com instead of servername. However, this did no make a difference.
Could the issue be any of the following:
- Oracle 10.2.0.1 GRID does not work with 10.2.0.5 agents ?
- Oracle GRID in general don't work on SOLARIS Zones?
Please help.
Thanks.

OMS - -> Agent communication is not upward compatible
Downward, so Agent 10.2.0.1 --> OMS 10.2.0.5, should not be a problem.
In the last case however, you would not have access to any 10.2.0.5 Agent features.
So you can choose from 2 working options:
1 - Install the 10.2.0.1 Agent
2 - Upgrade your OMS to 10.2.0.5 (preferable)
Regards
Rob
For more info, tips and tricks on OEM GC, check http://oemgc.wordpress.com

Webutil equivalent of host(cmd,no_screen) and host(cmd,screen) builtins

Hi,
What's the webutil command equivalent to host(cmd,no_screen) & host(cmd,screen)? Host builtin can be used only in windows platform, but to make it common across all platforms, webutil_host is needed. So, if no_screen parameter is used, what can be used in webutil to make it work as the host command with no_screen option.
Thanks in advance,
Natraj.

I know this thread is old, but I figured I would contribute this in case anyone is still looking for an answer:
http://www.commandline.co.uk/cmdow/
It is third-party code, but it appears to do just what it claims to.

How to get the "host printer" and "destination host" as part of spad output

Hi ..
If i run the spad tcode and then i choose one printer, i see 4 folders: Device Attributes, Access Method, Output Attributes and Tray Info.
if i go to Devicess attributes i see: Device Type, Spool Server, Host, Device Class, Model, location , Message, lock printer in sap system.
If i go to Access Method i see the fields: Host Spool Access Method, Host Printer and Destination Host.
I am creating a report that needs the information mixed between the folder Device Type and Access Method folder
If i run spad tcode and enter "*" in Output devices i see only some of the fields i need but i need to see other fields that are contained into Access Method folder, this means, i need the complete report of all printers i have in my system with this fields:
Device Attribute - Output device (spad - entering "*")
Device Attribute - Spool Server (spad - entering "*")
Device Attribute - Location or message (spad - entering "*")
Device Attribute - Lock printer in SAP system (i do not see it if i run spad and choose all "*")
Access Method - Host Printer (i do not see it if i run spad and choose all "*")
Access Method - Destination Host (i do not see it if i run spad and choose all "*")
Access Method - Do not Query Host Spooler for Output Status. (i do not see it if i run spad and choose all "*")
Could you please le tme know how can i get the output of all the devices (printers) i have in my system with the above fields showed?
Thanks in advance.
Sapskystars.

As far as I can read you can find all that info in table TSP03D
Regards
Juan

/etc/hosts and /etc/inet/hosts

we're running Sol10x86 11-06 and notice that there's no link between /etc/hosts and /etc/inet/hosts as there has been on some previous versions. /etc/hosts is the only file that contains all of the info for our IPMP configuration, and that seems to be enough during reboot.
what looks at /etc/inet/hosts? any danger in making /etc/inet/hosts a link to /etc/hosts?

I don't have a copy of 11/06, but I've never seen a default installation of Solaris without that link.
It's certainly there in 08/07. Is there any chance that whatever process is populating /etc/hosts on your machines is breaking that link?
Darren

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible

NLB Cluster problem

I'm trying to implement Network Load Balancing for my VPN Servers. I have 2 Window Server 2008 R2 running as VPN Server integrated TMG2010 Firewall. Both nodes can ping from one node to another node. On the first node, I tried to connect to the second
node many time through External Interface but failed. When I click connect, it always appear the error "The RPC Server is unavailable on the specified computer". I also tried to disable RPC Restrict from TMG Firewall Policy but it doesn't help. How
can I resolve this problem?

Hi,
Could you clarify “I tried to connect to the second node many time through External Interface but failed.” How did you do that.
Please disable the Windows built-in firewall first. Which type of the NLB mode you are using? If all interface are set to run NLB in “unicast” mode, NLB Manager will fail to connect to hosts.
The similar thread:
Strange warning message while opening NLB Manager
http://social.technet.microsoft.com/forums/windowsserver/en-US/f9a8330a-d114-4f02-8fbe-5d0c36bb3e49/strange-warning-message-while-opening-nlb-manager
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with DNS - ping/Safari cannot resolve, but host/dig work OK

Hi All,
Have a weird problem with DNS which is a bit similar to the following ones:
http://discussions.info.apple.com/thread.jspa?threadID=2190208
http://forums.macrumors.com/showthread.php?t=337942
I connect with remote internal network via OpenVPN and from time to time (yes, intermittent problem :)) internal DNS names cannot be resolved.
When it happens I can still resolve names using host or dig utilities, but applications (like Safari) and ping cannot resolve them.
resolv.conf has proper DNS server set:
*$ cat /etc/resolv.conf*
*# Mac OS X Notice*
*# This file is not used by the host name and address resolution*
*# or the DNS query routing mechanisms used by most processes on*
*# this Mac OS X system.*
*# This file is automatically generated.*
*domain openvpn*
*search openvpn*
*nameserver 10.0.0.1*
More than that - it can resolve those internal names when queried directly, for example using host:
*$ host YYY.XXX.ru 10.0.0.1*
*Using domain server:*
*Name: 10.0.0.1*
*Address: 10.0.0.1#53*
Aliases:
*YYY.XXX.ru has address 192.168.x.y*
but at the same time ping reports "*Unknown host*":
*$ ping YYY.XXX.ru*
*ping: cannot resolve YYY.XXX.ru: Unknown host*
I tried "*dscacheutil -flushcache*" and it did not help. Also tried to comment out domain and search directives in resolv.conf and it did not help as well (and actually it should not matter).
Any ideas why this can happen and what else can I check when it happens again?
Thanks!

I have the same issue. It cropped up after I installed updates to MS Office 2008 and Firefox in which I also saw issues with the icons disappearing in the dock of the applications that were open when I started the Office update. I rebooted to try to get them back, but ended up deleting them and restoring from the Applications folder. I don't know if that's a red herring or not, but I generally try to figure out what has recently changed that may cause something to suddenly start failing.
I'd been working successfully all morning before it started acting up. Switching from wifi to cat5 had no effect.
@realaaa, were you able to resolve without a major undertaking, like reinstalling your OS?
pnmbp:~ pn$ dig goo.gl
; <<>> DiG 9.6.0-APPLE-P2 <<>> goo.gl
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40996
;; flags: qr rd ra; QUERY: 1, ANSWER: 6, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;goo.gl. IN A
;; ANSWER SECTION:
goo.gl. 140 IN A 74.125.45.139
goo.gl. 140 IN A 74.125.45.102
goo.gl. 140 IN A 74.125.45.113
goo.gl. 140 IN A 74.125.45.138
goo.gl. 140 IN A 74.125.45.101
goo.gl. 140 IN A 74.125.45.100
;; Query time: 27 msec
;; SERVER: 192.168.2.1#53(192.168.2.1)
;; WHEN: Mon Dec 13 16:59:34 2010
;; MSG SIZE rcvd: 120
pnmbp:~ pn$ ping goo.gl
ping: cannot resolve goo.gl: Unknown host
pnmbp:~ pn$ curl <a class="jive-link-external-small" href="http://">http://goo.gl
curl: (6) Couldn't resolve host 'goo.gl'
pnmbp:~ pn$ host goo.gl
goo.gl has address 74.125.45.100
goo.gl has address 74.125.45.101
goo.gl has address 74.125.45.138
goo.gl has address 74.125.45.113
goo.gl has address 74.125.45.102
goo.gl has address 74.125.45.139
pnmbp:~ pn$

Problem updating 10.6.8 SWUpdate server to host Lion updates

Anyone else having problems following the directions in KB article "Mac OS X Server v10.6: Hosting Software Updates for OS X Lion or Lion Server" <http://support.apple.com/kb/HT4771?viewlocale=en_US>?
It's basically modifying a plist and a conf file, but when I look at MY .conf file I don't find the specified text to change? I've even checked the previous version of the file, and don't find the text.
TFA says:
In step 5, you will need root access to update the file /etc/swupd/swupd.conf. To be safe, make a backup copy of the file before editing it. Locate the following line near the end of the file:
RewriteCond %{HTTP_USER_AGENT} Darwin/11
Edit the following line to read:
RewriteRule ^/index\.sucatalog$ /index-lion-snowleopard-leopard.merged-1.sucatalog
But I'm not finding either of these lines in my own file.
Anyone have luck with this? Anyone run into the same issue?
TIA for any help!
-Nick

Hmm, I'm having more of a problem now. Having re-started SUS, /etc/swupd/swupd.conf contains the required lines, so I stopped SUS again, edited swupd.conf as indicated and restarted SUS. All seems good, except when I checked back, swupd.conf has reverted back to how it was prior to my edit. IOW, the rewrite rules etc are there, but Darwin/10 and Darwin/11 are identical again with no mention of lion.
I've repeatedly edited the file, but every time SUS starts, it reverts the file. The swupd.conf.previous file actually contains the correct line, so looks like every time SUS starts it copies swupd.conf to swupd.conf.previous, but then creates a new swupd.conf based on something else.
I also edited /System/Library/PrivateFrameworks/SUServer.framework/Versions/A/Resources/swupd . conf to contain the correct line, but although it does seem to be retained, it doesn't help and /etc/swupd/swupd.conf ALWAYS reverts to the old incorrect line.
So, how worrying is this that Apple's own technical article on this subject is now wrong on 2 counts. First of all, swupd.conf is likely to initially not contain the line they are instructing us to modify and then if it does (because SUS has been restarted since they issued some update) editing the file is UTTERLY USELESS since starting SUS again just reverts the file. Sometimes I despair.
Anyway, SUS is obviously obtaining the file from somewhere else and writing /etc/swupd/swupd.conf on every start. So where is it getting it from? I cannot find any other instance of swupd.conf, so it's extracting it from something else. Anyone any idea where?

NLB converging problem VM1 on 2008R2-host VM2 on 2012R2-host

Similar Messages

Maybe you are looking for