NLE Equipment suggestions *post house guy's, please*

Hello folks,
Over the past 3 years or so, I've seen a few posts here that dealt with, '...if you could put together the best Apple-FCP system what would be included?' I've found these threads fascinating and enlighening... As a 35+ year editor, I'm amazed at the level of sharing that goes on these day's in this artform -- that's not 35 years old, that's as a editor, and I don't use that term likely. As an editor in the 70's-80's distinguishing between editor and technical director was pardon the pun, a "blurring thing to do"...
Well, here's that question again, this time, from me....
Take into consideration these final delivery products, WITHOUT owning a digiBeta deck. AND, audio layback done by pro's ELSEWHERE, i.e., outsourced [I've been around long enough to know; have the audio guy take care of THAT] not on the concerned system I'm looking to build...
I've built 2 complete component analog post production suites (in an other lifetime), taking on something like that at this time of my life would be utter foolishness (for all intents and purpose; their gone -- a simple NLE editing work station (hence no need for a server, yet), although it presents its on set of unique problems, I can handle...
This sytem will not be used for outside clients - purely in-house.
Delivery formats: DV, DVCAM, HDV DVD and eventually HD
ALL work will be broadcast spec, does that mean it will air? The client does not towards external distribution, other than the internet which includes streaming video.
Most source material will be generated in-house, initially DV/HDV
Graphics app's: Illustrator, PS, PainterIX
Compression app's: ?????
The best G5: (A serious eye on the quad - any nightmares out there?)
Monitor[s] for G5: ???????
External RAID: FW800 Array ???????
RAM load (consider extensive use AAE - Motion usage)
Digitizing card/rachmount [if necessary] device, something simple to use (I'm getting older) actually, I'm to instruct 2 tech savey college age art students in the use of the system...
Computer Monitor: ??????
Output Monitor: NTSC 16:9 & (cheapest HD[V] monitor)
VTR: Sony UVW 1800 component BetaSP [on hand], DSR-11[on hand, and ???????
Audio: Simple 8x2 stereo board w/phantom power (voice overs, scratch track and VideoTape footage audio.
anything else ???? I won't be using a systems guy - I'm THAT guy -- I want the system to work right out of the box, well, after FCP Studio app's are loaded....
Nomenclature for suggested equipment would be helpful -
I'd sure appreciate post house editors to comment as well as those long-in-tooth...
Thanks a lot for your time folks, appreciate it!
Graeme you out there?
David Healy
Las Vegas, Nv.

Thanks for the info and of course the understanding, althought I am sure someone official browses it now & again my main aim was to get this out there. I had an issue a while ago with EA sports regarding their FIFA 15 game, to cut along story short I was incorrectly banned from their servers for apparently botting so I couldn't play online. Their customer service was diabolical, pretty much on par with this. After some research I found out they were the voted the worse company in the states so that said it all. After being passed from advisor to supervisor to manager and back again everything fell on death ears. So through Google I found as many sites & email addresses as possible and posted/sent my argument. It got as far as the EA president where it was all sorted and I was heavily compensated. If I hadn't of done that though I'd still be banned from their servers.  Will do exactly the same with this case, as everthing goes throught to someone as SKY in the UK it should be a dam sight easier than getting a reply from EA Canada etc.

Similar Messages

  • I bought an ipad from some one and i can't activate it and it keeps on showing that i should type the apple id and password link to that ipad which i dont know and i can't even locate thi guy. Please help if there is a chance to activate the ipad. Thanks.

    I bought an ipad from some one and i can't activate it and it keeps on showing that i should type the apple id and password link to that ipad which i dont know and i can't even locate thi guy. Please help if there is a chance to activate the ipad. Thanks

    There is no chance at all that you can activate the iPad without the previous user's Apple ID and password. That is the feature of iOS 7 Activation Lock.
    Every time I read one of these post, I can't help but think that the user asking about this (in this case - you) was duped into purchasing a stolen device. If the seller was legit, they would have erased the device completely before they sold it.

  • Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

    Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

    Nevermind, I got it working.
    I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed.

  • Problem in BDC for posting an amount feild, please help

    I am doing one batch upload problem. Where I have to upload data from transparent table to amount field into Tcode FPE1. My problem is that when I tried to post this field I get the message 'Field is two big for screen field'. I debugged and found out that when I post amount field (type CURR Length 13 Decimal 2) into Internal table for type BDCDATA, the field get left aligned in Fval-bdcdata field which is of 132 character long. I also tried to change the type of amount field into Char type, but then I get the error 'Enter numeric value'. If you got any idea how to post this amount filed please to pass me.
    Thanks and Regards,
    Shekhar

    Hi Shekhar,
    Use the following:
    DATA:                                 
    zz_menge(16) TYPE c.
    WRITE bseg-menge                
       TO zz_menge UNIT bseg-meins. 
    PERFORM bdc_field                           
           USING 'VBAP-ZMENG(01)' zz_menge.
    (in the example the quantity field BSEG-MENGE is posted to the quantity field in the orderposition).
    Regards,
    John.

  • Hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode

    hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys

    - See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Next try letting the battery fully drain. The try again.

  • GL Account : Cannot be posted to cost object, please check your entry

    Dear All,
    I've problem in general posting or in FBCJ (cash journal) ....
    When I try to make journal  : Debit Expense  and Credit Cash in F-02 or in FBCJ then I chose Post an error appear " Cannot be posted to cost object, please check your entry " ..
    Because GL account "Expense" assigned to cost element, I need to fill cost object ... when I filled it with Internal order or WBS, the error appeared , but there was no error when I filled with Cost center ....
    For your info there was no problem with Field Status Group ( I thought ) cause I ticked with Optional entry for WBS and IO ...
    Beside it, I've assigned the company code in Controlling Area and Operating Concern ...
    Network in WBS was in optional
    Please give me solutions
    BR,
    David Sindhu
    Edited by: david_sindhu on Jan 26, 2011 12:06 PM

    Hi Alex,
    The posting key was 40 and there was no problem as I choose Optional ..
    My WBS was not statistical ...
    Any idea ?
    Edited by: david_sindhu on Jan 27, 2011 3:18 AM

  • Post house in PDX for Audio Sweetening?

    I've never been good at the audio end of things and now I have a project that I want to send out to a Post House to sweeten up a bit. Can anyone recommend a Post House in the Portland, OR area that they think highly of?
    I have the video and audio done, but I need help pushing it to the next level.
    Any help is appreciated.

    I am not in PDX but work with clients all over the country for film/tv. I specialize in all areas of audio post and original music scoring. If you want just give me a call or email and can talk about what you are looking for. If I can't help for some reason maybe I can give you some direction.
    Mike Hupfer
    Millennium Media Productions, Inc.
    303 458 1337
    [email protected]

  • Hey guys i please i need a help on my ipad. i have received an ipad from anonymous person but she has already logged in to iclouds, since i dont know her password how do i sign out without using password on ios 8?

    Hey guys i please i need a help on my ipad. i have received an ipad from anonymous person but she has already logged in to iclouds, since i dont know her password how do i sign out without using her password on ios 8?

    You can't. Your mysterious benefactor must remove the device from her (I guess you know it's a her?) iCloud account by logging into icloud.com, going to Find my iPhone and removing from there.
    Matt

  • My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

    My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

    If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
    http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
    Also make sure you clear your browser cache before viewing you published files.

  • Hello guys! Please help me to deauthorize all my computers. It is necessary because I need to authorize other computer, and four of five computers don't exist anymore. It's totally unacceptable for me to wait a year. Thanks for understanding and support!

    Hello guys! Please help me to deauthorize all my computers. It is necessary because I need to authorize other computer, and four of five computers don't exist anymore. It's totally unacceptable for me to wait a year. Thanks for understanding and support!

    Contact iTunes support.
    Contact iTunes support.

  • AVID guy about to turn FCP- Equipment Suggestions

    OK-I have waited, and watched for the last 3 years at NAB in Vegas and have seen the writing on the wall for some time now. I have had it with my ten year old AVID, and have decided to "purchase" a FCP system.
    Assuming that I have to start from scratch with equipment, what would you suggest I purchase to get all the benefits I have had with my AVID. I do like the idea of reducing my office full of drives and monitors, for a more lean setup. I also intend to work on hi-def projects in FCP.
    I plan on doing most projects at home, which would support a MacPro tower, but I also have seen the demos at NAB, all on the MacPro laptop and like the idea of carting projects around, when I travel.
    I went to the Apple store, and saw that a tricked out tower, with everything in it would be over $13,000. Overkill? What config would get the job done, without breaking the bank.
    I will need to input from BetaSP, mini-DV, and mini-HDV, so I will need an AJA box, right?
    What drives do you suggest for HD? Can you try and work off of HD with the internal drives configured in the tower (I think 3 - 750gigs can be installed), or would you do SCSI? What about a laptop with external firewires doing HD?
    What about monitors? I am used to the two AVID monitors and a client monitor, all spread across my desk. Have you had good luck with using just one large 30"?
    What about HD cards to run in the Mac?
    Of course I am trying to accomplish these as economically as possible, as well as taking up as little space in my office. Please let me know what has worked for you, and what I might be forgetting.
    Many thanks for the help.

    Get the fastest Mac Pro with as much RAM as you can get and an X1900 card. Get an AJA box-- if you can afford it, the I/O HD looks amazing, and it's made for you HD people. Using the tower's internal bays is the fastest drive solution, but of course has it's disadvantages. If you feel the need to go external, buy an eSATA card for the tower and get eSATA drives. They will support more HD streams than anything else. Get a RAID setup if you can.
    I've always been fine with one monitor (and an broadcast monitor, of course).

  • Large Post House needs help. OMF -AAF NOT working in PP 8.1 beta or 8.0 Please anyone experiencing this same issue recently?

    We are getting ready to start our dev into PP CC. We know that there are real issues trading audio with the audio post teams, working in Pro Tools. Since PP CC is new to us, I (the Audio Post Manager) is trying to get a handle on what the issues are and how the overall community is coping...advise anyone?
    Video Software: PP CC 8.1 beta (and 8.0 public)
    Audio: Pro Tools 11.2.1
    All NLE's running on Mac Platform,
    Video suites are currently running 10.6.8
    Audio is running 10.8.5
    Thanks,
    Brucema12

    We are getting ready to start our dev into PP CC. We know that there are real issues trading audio with the audio post teams, working in Pro Tools. Since PP CC is new to us, I (the Audio Post Manager) is trying to get a handle on what the issues are and how the overall community is coping...advise anyone?
    Video Software: PP CC 8.1 beta (and 8.0 public)
    Audio: Pro Tools 11.2.1
    All NLE's running on Mac Platform,
    Video suites are currently running 10.6.8
    Audio is running 10.8.5
    Thanks,
    Brucema12

  • Equipment suggestions for FC-HD

    I'd appreciate your suggestions... I'm about to get involved in editing a lot of footage and I'll need to cut down on my turn around time. You can see below what kind of equipment I'm using. I've gone back and forth with iMovie and Final Cut, though my partner will also be using Final Cut so I'll be committed to FC. I know from experience how slow this is, and I'll definitely be looking to speed things up. : My question to you pro's is this: Can I speed things up by just adding another ext. drive, or is upgrading to a dual G5 really the answer? In the dream world, I spend the money picked off the tree out back. It's the rendering that kills my time, so I'm not sure if a dedicated external drive is the answer or not.
    Thanks.
    Extra info: I already have 1-160 gig & 1-250 gig Lacie drives.
    iMac 17" PowerPC G4   Mac OS X (10.4.5)   1GHz, 768 MB DDR...
    iMac 17" PowerPC G4   Mac OS X (10.4.5)  

    Sorry I didnt' see these posts... usually get an email...
    Anyway: I just extended this question to a new post because my scenario may change a bit. I may be doing the editing while traveling and looking at the macbook pro, but after hours of reading, i'm concerned. All the "universal" upgrade issues and "noise" stories worry me if I'm on a plane editing. I don't know which to purchase, Macbook or PPC.
    To finish your questions (X), it'll be 8-15 minute segments, small to mid effects, raw and imported footage, and I have yet discussed the delivery medium with my tech guy. So hopefully you can continue sharing your wisdom with the addition to my question. So much thanks.

  • Flash question...not sure which section to post in...please help the n00b...

    Background: I am a designer (Illustrator/Photoshop) being thrust into the position of creating e-learning materials. I have managed to teach myself the infinitely irritating P.O.S. (piece of software) called Captivate, but am still pretty much useless in Flash.
    I have a project that a former designer created a year or two back. It appears to have been done wholly in Flash, though Captivate may have been involved (not sure why it would have, but I don't know enough about what I'm looking at to be sure). She is no longer with the company, so I can't ask her directly, but I am hoping someone can help me here. The project is essentially Jeopardy, as in the game show. The design is such that it is a static screen (identical to the Jeopardy screen), wherein a user mouse-clicks a value in a category (e.g. Forms for 200), and a window (not an actual browser window, but a flash element) opens over top of the main screen, displaying the question and giving a list of selectable answers (typically multiple choice). Correct and incorrect answers are added or subtracted from the score at bottom. It seems relatively straight-forward (and I'd be happy to post all materials here if that would help anyone answer my question). What I need to do is change these categories/questions to update this material to make it concurrent with a new training course. I am hoping I can do this with the materials I have at hand from the previous designer- ideally, update the text file (I think I can follow the formatting to understand how to update questions/answers/correct answers/etc) and then "plug it in" to this framework...but I don't know. I'm at a loss.
    The outputted Flash file (of no functional use to me, I believe) (.swf)
    The Flash file that contains the framework (this has all "0000" for scores, "Heading" for headings...aka nothing is populated in this framework) (.fla)
    The outputted html file
    A .txt file containing all questions, headings, and values that would populate the framework (example below)
    "&heading1=Banner Forms&
    &heading2=Tricks of the Trade&
    &heading3=Banner Speak&
    &heading4=Surprise!&
    &points1=1000&
    &points2=2000&
    &points3=3000&
    &points4=4000&
    &points5=5000&
    &question1_1=What form do you use to view a Registrar hold?&
    &answer1_1A=TSIAUTH&
    &answer1_1B=SOAHOLD&
    &answer1_1C=SGASTDN&
    &answer1_1D=SHADEGR&
    &correctAnswer1_1=B&"
    It seems that this text file would be imported into the open framework in Flash, but I do not know the first thing about doing any of this. I will eventually be taking some Flash courses, but this project has a much tighter deadline than that.
    Can anyone give me any insight into how to proceed? Please let me know if I should upload these files to link here, if it will help anyone to figure out how this works.
    I apologize for what I imagine is a horribly simple question, but I am truly blind with regards to this material.
    Admins, I apologize if this is not posted in the correct area.
    Thanks ahead of time for any possible help.

    NEAT!
    Hey guy, I got your answer for you. Or should I say hey "IDIOTA".
    You see, that text file is read by the HTML when you access it. As in, there is no "importing" to be done. Simply update the text file as necessary to reflect the categories/questions/answers/correct answers, save changes, and that is that! Provided that you keep the text file in the same directory as the .fla and the html (which you obviously MUST do, or else the Jeopardy screen will show all blanks), you will be good to go! All eagles! All aces! Whatever the phrase is.
    Anyway, hope this helps, chump. Any other dumb questions?

  • Suggestions Posted Sept 23, 2004

    This message is mainly directed to Oracle support team...
    I understand you have a great deal of inquiries and other matters to attend to. And that is very much appreciated. However, if I am not mistaken, you are in a customer support/customer service group. As such, maybe, customer relationship management (CRM) would beg for you to try to give attention to any inquiry, suggestions, or feedback sent to you.
    My company is one of Oracle's clients--possibly one of the biggest, and we are betting kind high on O HTML DB.
    Is there anyway you can give attention to the aforementioned posting?
    Best regards to all!
    J-P

    J-P,
    I searched and believe I found the post you are referring to. A link to it would have been useful. I read the post and it looks and I'm struggling to find a direct question.
    I'd like to point out that you are not addressing the Oracle support team, but rather a collection of enthusiasts and users of Oracle HTML DB.
    In any event, if you did have a question related to HTML DB, please ask it again and we'll try to do our best to answer it.
    Sergio

Maybe you are looking for