NLS Language patch for Oracle12.1.1

Hi
I Did Oracle12.1.1 Fresh Installation
Now I am going to apply NLS Patch.
My Question here After Applying NLS Patch is any need to apply Translation Synchronization Patch ?
Thanks
With Regards
Abu Omair Hafeez

Hi Abu;
>
Now I am going to apply NLS Patch.
My Question here After Applying NLS Patch is any need to apply Translation Synchronization Patch ?In additon to Taher please check below and see its helpful
need help for installing R12 on Solaris 10 SPARC 64-bit
Re: NLS patch for EBS 12.0.6
Hope it helps
Regard
Helios

Similar Messages

German language patch fot 11.5.10.2 EBS

Hi All,
Can you please let me know the German language patch for 11.5.10.2 EBS version.
Thanks,
Venkat.

I want to get german language in my Instance. What patch i need apply for German language. At present in my instance i have English and Arabic.Hi,
The best method to add language in existing instance is using the translation sync patch.
Please follow the Note 252422.1:Requesting Translation Synchronization Patches for steps to follow and also you need to check the DB characterset ( it always recommend UTF8 to support multi-language)
-Rk

Procedure for NLS Language Installation

Hi
I installed oracle12(12.0.4) on windows 2003 server,while installation i selected arabic as nls language and character ser as ARISO888996 after that i i applied HR global patch english,Now i want to install arabic language(enable) for that what steps i need to follow?
Thanks
With Regards
Umair

Umair,
Please refer to the this thread.
Installing Arabic in R12
Re: Installing Arabic in R12.
Regards,
Hussein

NLS patch for EBS 12.0.6

Hi ,
I have a EBS 12.0.6 fresh install. Now I wanted to install japanese language and i am looking for the NLS patch number. I am able to find the 6394500 for 12.0.4. Should I use the same for 12.0.6 also. Please help.
thanks in advance
Kala

Hi,
Can you help where can I find NLS patch for Japanese Language for R12.0.4 Check Oracle e-Delivery website and/or MOS. If you could not locate the files then log a SR.
Thanks,
Hussein

How to enable NLS languages after installation in R12 and 11i

Hi,
We were having a R12.1.3 with NLS supplement media with us. We have installed it on on one of our development server.
We have selected 14 languages at the time of installation.And after installation when the login page appeared , we were able to see all the languages but only English is enabled.Rest other languages were disabled.
Question 1: Steps to enable rest of the languages in R12 and 11i environments.Is there any relation with localisations?
Question 2: How patches(one off , mini packs, family packs and maintainence packs) are applied for this type of environments.
Detailed Steps required.
Question 3: If only India localisation is in use do we require to apply patches for other languages as well at this point of time.
Question 4. How CPU patches are applied for this type of enviroments.
Regards

We were having a R12.1.3 with NLS supplement media with us. We have installed it on on one of our development server.
We have selected 14 languages at the time of installation.And after installation when the login page appeared , we were able to see all the languages but only English is enabled.Rest other languages were disabled.12.1.3 does not come as a fresh installation media pack (12.1.1 does!).
Question 1: Steps to enable rest of the languages in R12 and 11i environments.Is there any relation with localisations?You need to add those languages via OAM -- Please see old threads for similar discussion http://forums.oracle.com/forums/search.jspa?threadID=&q=NLS+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Question 2: How patches(one off , mini packs, family packs and maintainence packs) are applied for this type of environments.
Detailed Steps required.You will have to apply the US patches as well as NLS patches (for all installed languages).
Question 3: If only India localisation is in use do we require to apply patches for other languages as well at this point of time.If other languages are installed, then yes. Otherwise, you can just go with the US patches.
Question 4. How CPU patches are applied for this type of enviroments.Same as any other installation except you have to consider applying the NLS patches for the application patches (Database and Developer/OracleAS 10g patches remain the same).
Thanks,
Hussein

Problem in applying the 6078836 OS Library Patch for Oracle HTTP Server

Hi ,
While installing Oracle ebusiness suite R12on a RHEL5 linux box (2.6.32-300.10.1.el5uek)
After running the installation, the post-installation System checks revealed that the HTTP, Virtual Directory, Login Page, Help Page & JSP services were failing. All the errors have the same error code RW-50015. ! Require Installing an OS Library patch for HTTP server according to Note ID
Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (32-bit) [ID 402310.1]
I am unable to stop the Database after stopping the Apps tier services. while trying to login into sqlplus hitting up this Error ! Please Advise
sqlplus: error while loading shared libraries: /oracle/VIS/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
[Oracle@OracleLinuxServer 11.1.0]$ cd
sqlplus / as sysdba
sqlplus: error while loading shared libraries: /oracle/VIS/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
Following is the Output of some commands which may help in understanding the Issue !
*[Oracle@OracleLinuxServer ~]$ cd /oracle/VIS/db/tech_st/11.1.0*
*[Oracle@OracleLinuxServer 11.1.0]$ find / -name libclntsh\* -ls 2>/dev/null*
*142017047 13416 -rwxr-xr-x 1 applmgr oinstall 13712482 Dec 19 01:27 /oracle/VIS/apps/tech_st/10.1.3/lib/libclntsh.so.10.1*
*142016603 0 lrwxrwxrwx 1 applmgr oinstall 17 Dec 19 01:27 /oracle/VIS/apps/tech_st/10.1.3/lib/libclntsh.so -> libclntsh.so.10.1*
*142443526 13400 -rwxr-xr-x 1 applmgr oinstall 13696149 Dec 19 01:28 /oracle/VIS/apps/tech_st/10.1.2/lib/libclntsh.so.10.1*
*142443190 0 lrwxrwxrwx 1 applmgr oinstall 17 Dec 19 01:28 /oracle/VIS/apps/tech_st/10.1.2/lib/libclntsh.so -> libclntsh.so.10.1*
*89850399 36348 -rwxrwx--- 1 Oracle oinstall 37174788 Sep 12 2008 /oracle/VIS/db/tech_st/11.1.0/inventory/prereqs/bin/linux/libclntsh.so.11.1*
*89719502 0 lrwxrwxrwx 1 Oracle oinstall 17 Dec 18 23:33 /oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so -> libclntsh.so.11.1*
*89719501 36276 -rwxr-xr-x 1 Oracle oinstall 37100033 Dec 18 23:33 /oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1*
id
uid=2000(Oracle) gid=2000(oinstall) groups=2000(oinstall) context=root:system_r:unconfined_t:SystemLow-SystemHigh
*[Oracle@OracleLinuxServer 11.1.0]$ env|egrep 'ORA|PATH' | sort*
LD_LIBRARY_PATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/oracle/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib
LIBPATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/oracle/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib
ORACLE_HOME=/oracle/VIS/db/tech_st/11.1.0
ORACLE_SID=VIS
ORA_NLS10=/oracle/VIS/db/tech_st/11.1.0/nls/data/9idata
ORA_TZFILE=/oracle/VIS/db/tech_st/11.1.0/oracore/zoneinfo/timezlrg.dat
PATH=/oracle/VIS/db/tech_st/11.1.0/perl/bin:/oracle/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/oracle/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/Oracle/bin:.
SHLIB_PATH=/oracle/VIS/db/tech_st/11.1.0/lib:/usr/lib:/oracle/VIS/db/tech_st/11.1.0/ctx/lib

Also I 've checked the /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/ opatch_history.txt
Find that the Patch version is same for every Patch: Please suggest..... Thanks!
Following is the all contents of the file:
*[Oracle@OracleLinuxServer opatch]$ vi opatch_history.txt*
Command     : apply -verbose -silent /nfs/bld/d26/PRDXBLD9/apps/apps_st/comn/autobuild/patch/patch/7639602/7639602
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-25_23-17-01PM.log
Date & Time : Wed Mar 25 23:18:41 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : apply -verbose -silent /nfs/bld/d26/PRDXBLD9/apps/apps_st/comn/autobuild/patch/patch/7627743/7627743
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-25_23-18-41PM.log
Date & Time : Thu Mar 26 01:23:19 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
Command     : lsinventory
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-26_01-23-19AM.log
Date & Time : Tue Mar 31 03:13:12 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : lsinventory -invPtrLoc /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/oraInst.loc
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-31_03-13-12AM.log
Date & Time : Tue Mar 31 03:13:18 PDT 2009
Oracle Home : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /nfs/bld/d22/AB/autobuild/passwd
Command     : lsinventory -invPtrLoc /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/oraInst.loc
Log File    : /nfs/bld/d26/PRDXBLD9/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2009-03-31_03-13-18AM.log
Date & Time : Wed Dec 19 19:59:52 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /oracle/VIS/db/tech_st/11.1.0/OPatch
Command     : lsinventory
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-19_19-59-52PM.log
Date & Time : Thu Dec 20 00:03:59 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /home/Oracle/6078836
Command     : apply
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-20_00-03-59AM.log
Date & Time : Thu Dec 20 01:28:42 GMT+05:30 2012
Oracle Home : /oracle/VIS/db/tech_st/11.1.0
OPatch Ver. : 11.1.0.6.2
Current Dir : /home/Oracle
Command     : lsinventory -detail
Log File    : /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2012-12-20_01-28-42AM.log

Multiple Templates Selection When No languages patches are applied

Hi All,
I am looking for the best approach to translate the .rtf templates into different languages when no languages patches are applied.
Regards,
Nagesh Manda.

there are both "Upload to Flickr" and "BlackMug" apps in App World, for both of those services, they should work.
In your screenshots, the middle one, if you select one image, and then tap the second image, does it DE-select the first selection?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to download language pack for Oracle E-Business Suite 12.1

Hi,
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?
Please guide.
Thanks,
Rohit

Hi rohit;
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?What is your OS? I checked for linux, In e-delivery if you choose :
Oracle E-Business Suite Release 12.1.1 (with NLS Supplement) Media Pack for Linux x86
You will see:
Oracle E-Business Suite NLS Release 12.1.1 - Portuguese V16178-01 681M
Its avaliable there
Hope it helps
Regard
Helios

Is it necessary to purchase a shellshock bash bug patch for Mac OS X users?

Is it necessary to purchase a shellshock bash bug patch for Mac OS X users?

claytonfromwa wrote:
Is it necessary to purchase a shellshock bash bug patch for Mac OS X users?
I'm not aware of any being for sale and if there are it's a scam. bash is free software provided to Apple and many other computer software developers.
If you are still running Snow Leopard and you feel the need to patch bash, you will have to compile it for yourself.
Note that Apple is on record as saying:
The vast majority of OS X users are not at risk to recently reported bash vulnerabilities," an Apple spokesperson told iMore. "Bash, a UNIX command shell and language included in OS X, has a weakness that could allow unauthorized users to remotely gain control of vulnerable systems. With OS X, systems are safe by default and not exposed to remote exploits of bash unless users configure advanced UNIX services.

Workflow NLS language ZHT

In order for the process flow in OWB to function, I had installed Workflow 2.6 from Oracle 9i as instructed and the installation was successful. But when I tried to deploy my process, I got the following message 'RPE-02072: Oracle Workflow NLS language ZHT has not been enabled in the Oracle Workflow repository. Please enable using the Oracle Workflow wfnlena.sql server-side script.' I found the wfnlena.sql, but how do I enable it? I tried to execute wfnlena.sql, but I didn't know what parameters should I enter. Please advise.
Thanks

I figured it out and executed wfnlena in owf_mgr. But I don't remember that I have changed to ZHT language during installation, why would it ask for enabling it?

12.1.3 NLS Help Patches

Hi,
After upgrading from 11.5.9.2 to 12.1.3, we are applying 12.1.3 online help patch 9239095.
Where can we find the NLS help patches? Can we merge the nls help patch with generic help patch?
Thanks,
Kavitha

kkrm333 wrote:
Hi,
After upgrading from 11.5.9.2 to 12.1.3, we are applying 12.1.3 online help patch 9239095.
Where can we find the NLS help patches? Please see these docs.
Request For Translated Patch 9239095 [ID 1504876.1]
Oracle Applications NLS Release Notes, Release 12.1 [ID 788053.1] -- Install Online Help
Can we merge the nls help patch with generic help patch?Yes (if they were available).
Thanks,
Hussein

Asian language support for Nokia E7

Hi,
I cant view any web pages in other languages except english in E7.I cant even install anyother fonts in E7. Can anybody help me to view and type in other languages, and to install other fonts?
Solved!
Go to Solution.

dear nokia,
i live in greece and baught the e7 on a journey in Essen, Germany. At the time i had Anna and i asked to have the greek language and so i had.
yesterday i downloaded Belle and while everything is ok and the phone seems nice and fast with good shortcuts, i noticed that the greek language is no longer available either as writing neither as phone language.
the most weird thing is that all my contacs are in greek and so does the messages!
since the phone understands greek why is it that i cannot load a greek writing language patch?
at the local Nokia Care Point in athens kifisia they asked me for 16euro to load the Greek language witch is a huge disappointment for me since there is not a single warning for this problem when you load Belle via the computer.....
the least you could do is first warn for the problem and while working on new language packs
make the operetion FREE of charge from every nokia center!
you made this happen so you are the one to blame and ultimately you are the one that has to pay for this! or you are just going to lose clients who are dedicated nokia "fans" like me....
and something else... we are not talking about a nokia 100 here but for the top of the line E7, THE communicator phone, with an asking price of over 400 euro when new....
thanks for your time and i hope you anwser.
Nikolakopoulos Spiros
athens greece

NLS language of repsository

Hi list,
I have installed a database as a repository for EMGC installation , my enviroment is German ,ie i will support databases with german languages, so the
nls_language is German and nls_charachterset is WE8MSWIN1252 of the repository database.
My question does this make any problem because the nls_language of the repository expected to be American and nls_characterset AL32UTF8 ?
what made me confused is that on our old system with EMGC 10g we have the nls_language of the repository is American and nls_characterset AL32UTF8 so i want to know which langauge and characterset to chose.
DV version 11.2
Windows 2008
Best wishes
Edited by: welo on Jan 10, 2011 1:34 AM

Duplicate thread. NLS language of repsository
I have not seen any recommendation on db char set for OMS repository database. Refer to MOS for relevant support notes (e.g. as mentioned the install guides).
Please close this and continue in the proper forum, where you first posted.

How to provide language bindings for Oracle?

What would be the way someone should proceed
if they wish to create FREE binary distribution of language bindings between oracle client libraries and a language like perl, python, tcl, etc.? Are there developer
sdk's available for download from Oracle for
various platforms?

Hi rohit;
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?What is your OS? I checked for linux, In e-delivery if you choose :
Oracle E-Business Suite Release 12.1.1 (with NLS Supplement) Media Pack for Linux x86
You will see:
Oracle E-Business Suite NLS Release 12.1.1 - Portuguese V16178-01 681M
Its avaliable there
Hope it helps
Regard
Helios

AAC/MPEG-4 support patch for abcde

I got bored to day and made up this patch for abcde that adds support for AAC using the M4A extension.
It uses FAAC as the encoder and also patches abcde to version 2.2.3
I have not tested it yet so bear with me...i'll post my test results later.
You'll have to manually add the "M4AENCOPTS=" variable to the config
usage is: abcde -o m4a
UPDATED: fixed a plethora of typos
another side note is the fact FAAC must be compiled with mpeg-4 support, the Archlinux package for FAAC isn't, so therefore this could be a problem unless you compile FAAC yourself. I submitted a feature request to get mp4 support added.
the following is the 2.2.0 to 2.2.3 update+AAC patch. I will submit a AAC patch for the newest release to the developers of abcde later on.
--- abcde-old-2.2.0 2005-03-08 12:42:14.000000000 -0500
+++ abcde2 2005-03-08 12:11:07.000000000 -0500
@@ -11,7 +11,7 @@
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
-VERSION="2.2.0"
+VERSION="2.2.3"
usage ()
@@ -21,7 +21,7 @@
echo "-1 Encode the whole CD in a single file"
echo "-a <action1[,action2]...>"
echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
-echo "-A Experimental actions (retag, transcode)"
+#echo "-A Experimental actions (retag, transcode)"
echo "-b Batch mode: enable album normalization and nogap encoding"
echo "-c <file>"
echo " Specify a configuration file (overrides system and user config files)"
@@ -366,6 +366,9 @@
mpc)
run_command tagtrack-$1 true
+ m4a)
+ run_command tagtrack-$1 true
+ ;;
esac
done
@@ -489,6 +492,10 @@
## FIXME ## to the encoder ends up empty.
run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ m4a)
+ # AAC/MPEG-4 format (.m4a) is done locally, with inline tagging.
+ run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $M4AENCODER $M4AENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -w "$IN" -o "$OUT"
+ ;;
esac
done
# Only remove .wav if the encoding succeeded
@@ -737,6 +744,9 @@
if [ "$INTERACTIVE" = "y" ]; then
while [ "$DONE" != "y" ]; do
read ERASEPLAYLIST
+ if [ "$ERASEPLAYLIST" = "" ]; then
+ ERASEPLAYLIST=e
+ fi
case $ERASEPLAYLIST in
e|E|a|A|k|K) DONE=y ;;
@@ -764,7 +774,7 @@
ARTISTFILE=$(mungefilename "$TRACKARTIST")
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- if [ -n $STARTTRACKNUMBER ] ; then
+ if [ -n "$STARTTRACKNUMBER" ] ; then
# Get the trackpadding from the current track
CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
@@ -843,7 +853,7 @@
cdparanoia|debug)
if [ "$WEHAVEACD" = "y" ]; then
vecho "Querying the CD for audio tracks..."
- TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
+ TRACKS=$( $CDROMREADER -d $CDROM -Q --verbose 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
@@ -1354,7 +1364,7 @@
EDITCDDB=n
fi
if [ "$EDITCDDB" = "y" ]; then
- CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
+ CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d" " -f1);
# Use the debian sensible-editor wrapper to pick the editor that the
# user has requested via their $EDITOR environment variable
@@ -1387,7 +1397,7 @@
# Some heuristics first. Look at Disc Title, and if it starts with
# "Various", then we'll assume Various Artists
- if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
+ if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
echo "Looks like a Multi-Artist CD" >&2
VARIOUSARTISTS=y
else
@@ -1470,7 +1480,7 @@
echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
- if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
+ if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d" " -f1) ]; then
# This works but does not have the necessary error checking
# yet. If you are familiar with the CDDB spec
# (see http://www.freedb.org/src/latest/DBFORMAT)
@@ -1577,7 +1587,7 @@
WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
if [ -r "$CDDBDATA" ]; then
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d [:cntrl:])
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d [:cntrl:])
echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
else
echo "Grabbing track $UTRACKNUM..." >&2
@@ -1692,6 +1702,7 @@
SPEEXENCODERSYNTAX=default
MPPENCODERSYNTAX=default
NORMALIZERSYNTAX=default
+M4AENCODERSYNTAX=default
OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
@@ -1738,6 +1749,7 @@
SPEEXENC=speexenc
# mpp (Musepack)
MPPENC=mppenc
+M4AENC=faac
ID3=id3
ID3V2=id3v2
@@ -1773,6 +1785,7 @@
SPEEXENCOPTS=
# mpc
MPPENCOPTS=
+M4AENCOPTS=
ID3OPTS=
ID3V2OPTS=
@@ -2039,6 +2052,7 @@
spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
+ m4a) [ "$M4AENCODERSYNTAX" = "default" ] && M4AENCODERSYNTAX=faac ;;
*) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
exit 1
@@ -2100,6 +2114,12 @@
MPPENCODER="$MPPENC"
esac
+case "$M4AENCODERSYNTAX" in
+ faac)
+ M4AENCODEROPTS="$M4AENCOPTS"
+ M4AENCODER="$M4AENC"
+ ;;
+esac
# and which tagger
@@ -2144,7 +2164,7 @@
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC}
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT}
${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED}
- ${NEEDVORBISGAIN+$VORBISGAIN}
+ ${NEEDVORBISGAIN+$VORBISGAIN} $M4AENCODER
do
# Cut off the command-line options we just added in
X=$(echo $X | cut -d' ' -f2)
@@ -2207,37 +2227,6 @@
esac
fi
-if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
- case "$CDROMREADERSYNTAX" in
- cdparanoia|debug)
- # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
- if checkstatus cdparanoia-audio-tracks; then
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
- ## FIXME ##
- vecho "Querying the CD to obtain a list of valid audio tracks..."
- $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
- # Obtain a list of valid audio tracks from the results of the query
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-query | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
- fi
- # Obtain the track padding value from the before-processing list and pad the CD list
- TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " n" | wc -c )
- for TRACK in $CDTRACKQUEUE ; do
- TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
- PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
- done
- CDTRACKQUEUE=$PADNEWTRACKQUEUE
- # Now, compare if the values in the list are valid tracks in the CD
- for TRACK in $TRACKQUEUE; do
- if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
- NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
- fi
- done
- TRACKQUEUE="$NEWTRACKQUEUE"
- esac
-fi
# Create playlist if needed (backgroundable) and start reading in tracks
@@ -2446,7 +2435,7 @@
# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d [:cntrl:] | sed 's/ +$//')
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d [:cntrl:] | sed 's/ +$//')
splitvarious
fi
fi
the patches can also be found here http://www2.rudefyet.com:8080/patch
please post any other issues you have

not yet, i'm going to work all the kinks out before i submit it
as of right now I noticed some major typos, on my part, that cause it to fail...i'm working on that right now

NLS Language patch for Oracle12.1.1

Similar Messages

Maybe you are looking for