NLS support to break reports

Hello,
Following Damir's thread - Break formatting and number format of SUM value - it seems like not only we can't disable the final report sum, in a report with breaks, we don't have any kind of control over the text of this final row, and what is more disturbing for me, its language.
As Damir pointed out, sometimes this final row has no real meaning, but sometimes it is the real reason for the whole report. If this is the case, and the report is not in English (or one of the other native supported languages) the situation becomes very problematic – the entire report, including the break rows, is using the "local" language, but the most important line – report total - is in a "foreign" language.
Any ideas on how to deal with it?
Thanks,
Arie.

Hello,
It seems I spoke to soon, and there is a way to control the text, language and style of this final report sum row, as can be seen here -
Re: Break formatting and number format of SUM value
Thanks,
Arie.

Similar Messages

Error Message: "The formula syntax is not supported by the report"

We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
But when I tried to Add FormulaField, it succeeds
Please help me in knowing how to add SQlExpressionFields to ReportDocument.
Regards,
-atul

Thanx Don & Ludek for the reply.
CR provides support for addition/modification of SQLExpressions.
CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
innerReport .SQLExpressionFields.Add(name, strSQLExpression)
CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
Thanx
-atul
Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

Creating support message field reported by doesn't fill

Hi colleagues,
When I create a support message field reported by doesn't fill automatically.
I think that I've completed all required steps in order these fields were filled automatically. Fields sold-to party and support team are filled automatically, they work ok.
The steps that I've checked:
- The support message is created successfully from satellite message(SID=DES_01). The user which creates this message is zprueba5 exists with profiles: SAP_ALL, SAP_NEW at the satellite system.
-In the solution manager system(SID=SMG), transaction ib52 for the satellite system is filled with partners: employee responsible, sold-to party and system administrator.
- In the solution manager system(SID=SMG), zprueba5 exists with profiles: SAP_ALL, SAP_NEW.
- Transaction bp, zprueba5 user contains BP roles: Business Partner, Employee, Bill-To Party, Financial Services and at the tab "Identification":
External BP Number: SMG 010 ZPRUEBA5
ID Type     Description                         Identification number
CRM001    External System Identifier   DES_01 0020281686 100 ZPRUEBA5
CRM001    External System Identifier   SMG 0020276689 010 ZPRUEBA5
So, In the solution manager system(SID=SMG), crm_dno_monitor transaction when I open the support message just created from satellite system, I have an error because reported by field isn't filled.
Please could you help me?
Thanks and Regards
Raul Aguilar

Hi Nikhil,
At this message I'm going to reply your last two replies.
1.- You typed me "In ib52 select both the system simultaneously and then go to->parner and assign proper bp no for the respective partner function. You need to do it for every system may be users are same.
I hope you have maintained proper access sequence i.e. via ibase."
For each SAP System that I've defined at SAP Solution Manager, at ib52 transaction I've defined the three roles that IMG activity documentation types:
        Assign business partners with the following functions to the new iBase component systems:
            Administrator
            Key User
            Sold-to Party
SAP Solution Manager Implementation Guide->SAP Solution Manager(SP 17)->Configuration->Basic Settings->Standard Configuration of Basic Settings->Solution Manager->iBase->Assign Business Partners to iBase Components ->transaction Change iBase (IB52), enter in field Installed Base '1' and I select the SAP System->Goto -> Partner
      Function                                        Partner
    00000014 Employee Responsible     298
    00000001 Sold-To Party                  295
    SLFN0001 System Administrator      295
2.- You typed me "Select you partner determination procedure and double click on "User interface setting" here select appropriate partner functions and assign all of them in ibase as I said in above reply.
You must not be getting reported by partner function. Take out System administrator. Motivate by assigning points."
My Partner Determ. Proc. is SLFN0001, so I double click on User interface setting like you explained me, adn now appears:
Header Screen:
Sequence and Functions for (main) Partner Displayed
Partner Function1 00000001 Sold-To Party (CRM)
Partner Function2 SLFN0002 Reported by (CRM)
Partner Function3 SLFN0003 Support Team (CRM)
Partner Function4 SLFN0004 Message Processor (CRM)
But now I don't understand if at ib52 transaction I've to add any role or if from "User interface setting" I've to delete any Partner Function. Could you detail me when you type "You must not be getting reported by partner function. Take out System administrator", please?
Regards,
Raul .

NLS SUPPORT FOR ORACLE 8I

I am trying to use the NLS support of Oracle 8i on windows
Nt/2000 platforms. I have tried configuring the database
characterset and the national character set as 'IN8ISCII' - the
one prescribed in the NLS documentation for India territory and
Hindi as NLS Language and territory parameters. I have also
tried configuring them as 'UTF8' a character set prescribed for
unicode /universal 8 bits ASCII character sets but i am not able
to insert any rows with these charactersets in NCHAR or NVARCHAR
columns. if i try to insert them in regualr char pr varchar
columns i can insert in the ascii formats and I have to retreive
them on front end through different mask format fonts.
If any one have tried the NLS support pls let me know how to
insert the records and retreive thenm in the national language..
Thanks in advance..
Manoj Mehta

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Glen Fafara ([email protected]):
Will Oracle 8i run on an Alpha based machine? I am running Redhat Linux 6.2.
Thanks
Glen<HR></BLOCKQUOTE>
hi:
I am coming from Taiwan,
There's a problem,I installed O8iee(linux)
on Redhat Linux 6.2,when($svrmgrl)...
error occure:
Oracle Server Manager Release 3.1.6.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-03113: end-of-file on communication channel
would you help me
my e-mail:[email protected]
thanks a lot.

Windows 7, 64 bit support to Crystal Reports XI R2 SP5

Will the Windows 7, 64 bit support to Crystal Reports XI R2 SP5 be added?
Moving to CR 12 is the only solutions?
What are the options?
regards,
Srini

Hi Srini,
No, XI R2 is getting close to legacy mode so no new OS platforms will be added unless some large Partner requests it. Cr 12 is the only option, R2 will likely anyways. It wont be officially supported but it should work.
Thank you
Don

Multi language support by crystal reports..

Hi Experts,
Please throw some info or links about multi language support by Crystal Reports. How many languages it supports at present and what are they?
Should we create indivitual universes for every language which are required? if yes, is there any shortcut for the same.
Need to know about single sign on faclity also.
Please help.
Regards
BaaRaa.

Just check these links. Hope it might help you.
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/e0dedc7d-89a4-2b10-5385-909205c9b99f
Crystal Report 2008 support the following languages:
u2022 Chinese Simplified
u2022 Chinese Traditional
u2022 Dutch
u2022 English
u2022 French
u2022 German
u2022 Italian
u2022 Japanese
u2022 Korean
u2022 Portuguese (Brazil)
u2022 Spanish
u2022 Swedish

Getting error : This operation is not supported on a report server that runs in native mode

Hi,
I have installed SQLServer2008 Standard Edition in my system.
Using SSRS 2008.
I have added
http://<serverName>/ReportServer/ReportService2006.asmx as web reference in my project.
If i consume any method in ReportingService2006 am getting below error .
This operation is not supported on a report server that runs in native mode. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: This operation is not supported on a report server that runs in native
mode.
How to solve this problem?
Thanks,
Thangakumar

Hi Thangakumar,
In Reporting Services Web service, there are two endpoints available for managing objects on a report server, ReportServer2005 and ReportServer2006. The
ReportService2005 endpoint is used for managing objects on a report server that is configured for native mode. The ReportService2006 endpoint is used for managing objects on a report server that is configured for SharePoint integrated mode. From you description,
your Reporting Services runs in native mode, but ReportService2006.asmx is used for SharePoint integrated mode. If you need to call Reporting Services Web service in native mode, please change the address to:
http://<serverName>/ReportServer/ReportService2005.asmx
If you need to call Reporting Services Web service in SharePoint integrated mode, please change the address to:
http://<Server Name>/<Site Name>/_vti_bin/ReportServer/ReportService2006.asmx
For more information, you can refer to:
http://msdn.microsoft.com/en-us/library/ms155398(v=SQL.100).aspx
Thanks,
Albert Ye

Bidirectional NLS support in web-enabled forms.

Is it possible to have bidirectional NLS support in web-enabled forms? That is, can a local user make any settings changes on their workstation that will make (e.g.) Hebrew right-justified for text fields? If this all depends on the environment varible NLS_LANG, then it is set on the AS server and not user-changeable. I know you can change direction programmatically, but it seems odd that it doesn't work automatically. P.S. We are running forms 6i with Application Server 6i on an 8i database. Thanks in advance.

Frank,
I am using calendar.pll sent to me by my friend. I will search on OTN if this utility is avaiable on it. If it is there also, then I will download it and test it again.
Thanks,
Kiran.
Vadivelan,
I am sending simple form and calendar.pll to your mail address. But, remember this works only in windows environment so far. I am finding the solution for Linux/Web.
Kiran.

NLS support in 1.1

Does the NLS support in 1.1 require special configuration?
If iFS is installed with English as the language, can we still use extended character sets for checkin comments, descriptions, etc.? We get an exception if the object name uses extended characters.

Does unicode work with Apache/Jserv?
We set up iFS and the database with unicode
support and it worked fine with JWS. But when we switched to Apache/Jserv, it is not correctly showing object names with non isolatin1 characters.
Is there a way to configure Apache/Jserv for UNICODE?

Where is the Tech Support for Crystal Reports

Where is the technical support for Crystal Reports? I have just been through one of the worst technical supports circles in my entire career - this phone# to that phone# and only to be told you cannot talk to a Tech Support person. My dilema for anyone that can help - I am using Crystal Report 2008. I have mapped to a database in MS Access 2002. I copied the database to my desktop and created a test report. I can see the fields in the Field Explorer. I have dragged the fields onto the report and they are visible in Design View. I can see the data in the fields when I browse the fields. In the Preview View I do not see any data what-so-ever. I have not changed any defaults and have not suppressed or hidden information. The $1M question: Why can't I see the data on my report? I never had the problem when I used Crystal Reports v8.

The datasource shows my database. I believe that is what you meant. No data. IT has asked me to ask ? if in the Control Panel DSN if we need some information there. I don't have a clue - I am just a report writer and not an IT person.

VS2010 will support Seagate crystal report 6.0?

Hi All,
This is to inform you that we are currently using the VC++ 6.0 and Seagate Crystal Reports 6.0 in our application and we are successfully upgraded vc++ 6.0 to VS 2010.
but We tried Seagate Crystal report 6.0 to lastest version ,but rewrite application in our side , so we won't possible to rewrite application.
My question is, VS2010 will support Seagate crystal report 6.0?
Thanks & Regards,
Esha Abdullah M
Edited by: Esha Abdullah on Jun 27, 2011 8:41 PM

Hi Esha,
VS supports Managed Code now, using unmanaged C++ code may or may not work. As we've all told you, CR 6 is 12 years old now and it had no concept of Visual Studio 2010 or managed C+. It's still c+ so if you get it working then great, if not there is absolutely nothing we can do for you. There should be no reason it won't work as long as the C++ dependencies included with VS 2010 still supports 1997 VS 5/6 C++ runtime. If those dependencies are not available then Cr likely won't work.
For the last time, upgrade to CR for VS 2010 and move to CR Assemblies, you can still write and use CR in Managed C+, lots of people do, we don't have any samples for you though. Lot's of C# samples which is MS's replacement for unmanaged C+.
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Bottom line is we can't Confirm if it will work, you are mixing 1998 and 2011 technologies so there is absolutely no guarantee from SAP this will ever work and you will never get one from SAP. You are on your own....
There are so many reasons why it likely won't work to list, OS's, DB clients, Windows Dependencies, SECURITY, to name a few that even if it did work does your Company want to sell and support something that if your users have issues there is no way of ever getting it fixed?
Seriously, It's time to talk to your Product team and catch up with current technologies and Crystal Reports.
Don
Senior Support Engineer
AGS Primary Support
Global Support Center Canada
SAP Canada, Inc.

Regular Expression functions not supported in Interactive report filters ??

I'm using APEX 4.0.2 and I'm trying to create a row filter in an interactive report which uses regexp_instr and regexp_replace functions and I'm getting the message:
Invalid filter expression. regexp_instr
The code runs fine in SQL Workshop
select cytogenetics from z_patient
where regexp_instr(regexp_replace(cytogenetics,'(\,+|\"+|\s)',''),'(^46XX$|^46XY$|^46XX\[..\]$|^46XY\[..\]$)')=1
CYTOGENETICS
"46,XX [20]"
"46,XY[20]"
"46,XX"
"46,XY[20]"
"46,XY[30]"
"46,XY[26]"
"46,XY [33]"
"46,XX[32]
etc...
my filter is just the where clause above i.e.
regexp_instr(regexp_replace(cytogenetics,'(\,+|\"+|\s)',''),'(^46XX$|^46XY$|^46XX\[..\]$|^46XY\[..\]$)')=1
*Are regular expression functions just not supported in interactive report filters?*
thanks in advance
Paul P

Hi Paul,
regular expression functions are supported in interactive report filters, but it looks like that REGEXP_INSTR hasn't been added as valid command. Only REGEXP_SUBSTR and REGEXP_REPLACE are valid commands for computation expressions and REGEXP_SUBSTR, REGEXP_REPLACE and REGEXP_LIKE for row level filters.
I have filed bug# 12926266 to fix this issue. Sorry for the inconvenience.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Need a multi-level control break report displaying a cross-tab for each ...

I need a multi-level control break report that displays a cross-tab report for each
detail and subtotal. The individual cross-tabs are no problem. There are two issues:
1) How to get many cross-tabs (thousands) to appear in one report.
2) How to provide cross-tabs in-line on the multi-level subtotal lines.
Here is a concrete example.
Suppose the data base contains this table:
road (
id_number number, -- this is an artificial PK
city varchar2,
county varchar2,
state varchar2,
length number,
owner varchar2, -- roads may be owned by cities, counties, states, and others
surface_type varchar2 -- the surface type may be gravel, asphalt, concrete, and others
The table is populated with several million records that include every
length of road in a US city.
It is OK to suppose that all the attributes in all the records are not null.
Without the PK, there would be millions of duplicates,
which should all contribute to the summed lengths.
The report I need is like a control break report with a detail line for each
city together with subtotals for each county and state and
a grand total for the US at the end.
However, each detail and total line needs to be a cross-tab report
summing the length over the city, county, state or US
(whichever is called for at that location)
for each combination of owner and surface_type.
so the report would have the following structure:
a city cross-tab for the first city in county 1/state 1
a city cross tab for the last city in county 1/state 1
a cross-tab for count 1
a city cross tab for the first city in county 2/state 1
a city cross tab for the last city in county 2/state 1
a cross tab for state 1
a cross-tab for the US
Any suggestions will be appreciated.
This problem comes up because my client's legacy system,
which is being replaced,
already has such a report (in COBOL).
Thanks!!!
Steve
PS, I know one ugly way to do it. Namely, make a variable for each
possible combination of owner and surface. Then code an ordinary control
break report. However, I am looking for something better.

Hi Jenna_Fire,
According to your description, you have a matrix contains total for each group on each level. Now your requirement is, when you click on any number (data field or total), it will go to the detail report which returns all the detail information of the people
within the group scope. For example, if you click on the total of Active users in United States, it will return the detail information of Active users in New York and Texas. Right?
In this scenario, we should set the parameter (@Country, @State, @City) allow multiple values in both main and detail report. And in Default Value (@Country, @State, @City), query out all distinct values. In the textbox which contains
those total values, when set use these parameters to run the report, we only need to pass the parameters of parent groups. For example, if we click on the total of Active users in New York, we only need to pass Country, State, Status to detail report, and
in the detail report, the City parameter will use all distinct values (Default Values) because we don't pass the City parameter. We have tested this case with sample data in our local environment. Here are steps and screenshots for your reference:
1. Create parameter Country, State, City and Status in both main report and detail report. Set both Available Value and Default Value get values from query (Create a dataset for each parameter, use "select distinct [column] from [table]" as query). Set allow
multiple values for parameter Country, State and City in both reports.
2. In corresponding textbox, pass appropriate parameters in go to report Action.
4. Filter data in detail report (in where clause or using filters).
5. Save and preview. It looks like below:
Reference:
Using Parameters to Connect to Other Reports
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Does itunes u descriptions no longer support line breaks?

Hi. I've got a faculty member that wants all of his course recordings available on itunes u. Previously, he would write a description for each session which I would post in the description field. Now, it appears that the description field no longer supports line breaks. Content generated prior to June is fine but all new content just runs on in one long paragraph. Anyone else seeing this problem?

The collection is in the iTunes U directory. I'll have to breadcrumb you there since I don't know how to direct link. So, go to the University of Washington, Social Science, T536 Taxation of Trans-Pacific Transactions. In the description, you will see it is one giant paragraph, no formatting. Before we were converted to the new template (apple template, not our own) in April, this was formatted properly. I've created new collections and they also suffer from this same issue so it isn't simply a matter of the conversion. Thanks you for your help!

Any documents on Oracle J2EE/EJB NLS support

Hi,
Do you know where I might find more information about the NLS supporting Oracle EJB/BC4J areas?
Michael

Michael,
Try the Oracle Application Server documentation on OTN at:
http://otn.oracle.com/documentation/appserver10g.html
There is a globalization guide for the Oracle Application Server that may have the information you are looking for.

NLS support to break reports

Similar Messages

Maybe you are looking for