"NMAS Launch Failed" proxy error after patching server
Just applied NW65 sp2 server patch and the Border Manager 3.8 field patch
3c and now the server constantly beeps with the error message:
NMAS LAUNCH FAILED - PROXY AUTHENTICATION SERVICES DOWN
I have seen this on other servers recently patched but it generally goes
away after a couple of minutes. In this particular case, doesn't matter
what we do - reboot server, unload and reload proxy we still get this error
message every 20 seconds or so. Very annoying. If we unload proxy, the
error goes away but then of course we don't have a proxy server. Surely
there must be some simple solution for this? Thank you.
Don
You should post this to the BorderManager Proxy group.
(novell.support.bordermanager.proxies)
>>> <[email protected]> 1/28/2005 9:16:56 AM >>>
Just applied NW65 sp2 server patch and the Border Manager 3.8 field patch
3c and now the server constantly beeps with the error message:
NMAS LAUNCH FAILED - PROXY AUTHENTICATION SERVICES DOWN
I have seen this on other servers recently patched but it generally goes
away after a couple of minutes. In this particular case, doesn't matter
what we do - reboot server, unload and reload proxy we still get this error
message every 20 seconds or so. Very annoying. If we unload proxy, the
error goes away but then of course we don't have a proxy server. Surely
there must be some simple solution for this? Thank you.
Don
Similar Messages
-
Hello NG
Sorry I posted this question also in the
novell.support.modular-authentication-services forum. I think this place is
the better place to post this question
In Our environment we have the following OS and components installed
Netware 6.5 SP4
Edir 8.7.3.7
Border Manager 3.8 SP4
Nmas.nlm 2.60.18
Proxy.nlm 5.00.14
When Proxy is startet through startbrd, on the console the following error
is displayed.
Proxy-5.0-107
NMAS Launch Failed, Proxy Authentication Services down
When I unload the proxy.nlm the error message is not more present.
I checked the timesync and it seam to be ok. I reinstalled nmas only the
server installation from the BM3.8 CD but this didn't also solve the problem
How can I solve this problem? Some ideas?
Ramon LustratiHello Craig
Thank you for the TID. It was helpful. IN our LPO we had a CIFS Policy that
caused the problem. Now the problem is solved.
Ramon Lustrati
"Craig Johnson" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
> In article <5Bmjf.232$[email protected]>, Ramon Lustrati
> wrote:
>> A valic Login Policy? How should I configure this policy? Which setting
>> should be set?
>>
> I'm not sure you have an LPO issue, but have a look at this tid. See if
> any of those things that are mentioned are there - if so, the LPO is
> probably fine.
>
> http://support.novell.com/cgi-bin/se...i?10091495.htm
>
> Do you have a replica on the server?
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
> -
Launch failed with error code -2857
I've been running an app (EPSON Scan) for awhile without any significant problems. Today I check the Epson web site and they had an update for the app. So, I downloaded it, installed it, and tried to run it. Unfortunately, all I got was a couple of bounces in the Dock and nothing. I then went to the console and found the "launch failed with error code -2857" message. I've researched that as best I could and found that it is probably a problem with the application bundle. So, I opened the package, drilled down to the Mac OS folder, and double clicked on the EPSON Scan terminal command located there. Bing, a terminal window opened and the application launched and runs fine. So, the questions is, how do I resolve the CFM not finding the application correctly? I've run a pre-bind on everything but that didn't work. Seems to me like there is some config file that is not set up properly. I looked at the Info.plist file and I don't see any glaring problems. Any ideas? Epson also go a copy of this note...
First I want to say thanks for the feedback. I appreciate the support and helpful suggestions.
Second, Epson sent me an answer of sorts...they provided detailed instructions on uninstalling the application and then told me to reinstall using the disk image from their web site (in other words, don't use their web package to "update" and existing installation). I did this and things seem to be running fine now. It's unfortunate that their update instructions don't say to do this in the first place (maybe I missed it ).
So at one level this issue is solved. Unfortunately I'm too curious and wanted to know why the error happend in the first place. As a software developer myself (mainframe and midrange server based) I hate the "delete and reinstall" answer as it does nothing to really identify and solve the real problem. But I do also appreciate the idea of "just get it fixed fast" so that's what I did.
Anyway, I will now spend some time learning about Launch Services to see if I can get a more specific understanding of what happened.
Thanks again for the help.
24" iMac, 2GB Memory, etc Mac OS X (10.4.8) 20" iMac, two MacBooks, one Dual Core Mac Mini -
Proxy Error ( The ISA Server denied the specified Uniform Resource Locator
Dear All,
I am getting one error in ABAP proxy configuration,
following is the error.
~response_line HTTP/1.1 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). )
~server_protocol HTTP/1.1
~status_code 502
~status_reason Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). )
via 1.1 BLRSPRX10001
connection close
proxy-connection close
pragma no-cache
cache-control no-cache
content-type text/html
content-length 4070
suddenly one day this error occured. proxy configuration was working earlier fine. SLDCHECK also working without any problem now also. but in SPROXY it is saying no connection to ESR. only local objects.
Please help me.
Regards
Pradeep P NHi Pradeep,
What is this BLRSPRX10001?
IF it is rfc destination, then check the user.
This problem is related to user rights. The user used there might not have sufficient authorizations to invoke the proxy. (may be the authorization is expired)
Regards
Suraj -
Error after patch EP6.0 SP3- EP6.0 SP4(patch4)- WAS6.40SP6
We have WAS 6.40 SP 6.0 and EP 6.0 SP3 on HP-Unix 11i 64-bit.
I have tried to patch the portal twice to SP4 and after patching I got
twice the same problem.
The patch application - the exact patch is EP 6.0 SP4 Patch4 is
successful. There are no errors in the installation logs, etc.
But when I try to login to the portal url I get this error message:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.portal.ivs.api_iview.
Exception id: 02:21_05/08/04_0001_1516650
See the details for the exception ID in the log file
The error part of the portal log file is attached. The WAS is running
perfectly, no other errors or issues. The heap memory is set as per the
OSS 723909. I wonder if I have to add the 32-bit compatible UNIX shared
memory parameter settings as per OSS 497427, but I do not think it is
related the issue.
Please, advise.
Vladimir
Portal Log:
Aug 5, 2004 2:18:19 PM # SAPEngine_Applica... Info Loading
application com.sap.portal.yahoo #
Aug 5, 2004 2:18:19 PM # SAPEngine_Applica... Fatal Operation
failed - application: com.sap.portal.ivs.iviewservice
com.sapportals.portal.prt.runtime.PortalRuntimeException:
[PortalApplicationItem.__prepareClassLoaderAndDependencies]:
com.sap.portal.ivs.iviewservice
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.__prepareCla
ssLoaderAndDependencies(PortalApplicationItem.java:361)
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare
(PortalApplicationItem.java:207)
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoade
r(PortalApplicationItem.java:276)
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.__initJNDISu
pport(PortalApplicationItem.java:1780)
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.__initJNDISu
pport(PortalApplicationItem.java:1746)
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.initJNDISupp
ort(PortalApplicationItem.java:1730)
at
com.sapportals.portal.prt.core.broker.PortalAppBroker.preparePortalAppli
cations(PortalAppBroker.java:1306)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start
(PortalAppBroker.java:1429)
at
com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplic
ations(PortalAppBroker.java:1389)
at com.sapportals.portal.prt.runtime.Portal.init
(Portal.java:359)
at
com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit
(PortalCoreInitializer.java:54)
at
com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>
(PortalInitializer.java:129)
at
com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer
.run(Dispatcher.java:156)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher
(Dispatcher.java:354)
at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000
(Dispatcher.java:40)
at
com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run
(Dispatcher.java:109)
at com.sapportals.portal.prt.dispatcher.Dispatcher.init
(Dispatcher.java:387)
at
com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponent
s.addServlet(WebComponents.java:130)
at
com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadI
nitializer.loadServlets(ApplicationThreadInitializer.java:376)
at
com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadI
nitializer.run(ApplicationThreadInitializer.java:110)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:144)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException:
[PortalApplicationItem.__prepareClassLoaderAndDependencies]:
com.sap.portal.ivs.api_iview
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.__prepareCla
ssLoaderAndDependencies(PortalApplicationItem.java:361)
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare
(PortalApplicationItem.java:207)
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.__prepareCla
ssLoaderAndDependencies(PortalApplicationItem.java:352)
... 24 more
Caused by:
com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException
: Could not find portal application com.sap.portal.ivs.api_iview
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.refresh
(PortalApplicationItem.java:1093)
at
com.sapportals.portal.prt.core.broker.PortalApplicationItem.__prepareCla
ssLoaderAndDependencies(PortalApplicationItem.java:326)
... 26 more
Follow errors of other applications like
com.sap.portal.ivs.systemlandscapeservice, which are probably dependent
on the com.sap.portal.ivs.iviewservice.We needed exactly the SP Stack 3 specification - WAS 6.40 SP6 and EP 6.0 SP4, so I could not go to higher SP on both WAS and EP.
I resolved the issue by applying all EP6.0 SP4 patches sequentially. SAP claims that these patches are cumulative and you can directly install the latest available patch, but it did not work in our case.
I was suspicious at the beginning, because the files size of the first patch is much bigger that patch 4, but the installation did not complained:
08/03/2004 06:13p 32,672,495 EP6PORTAL04P_4-20000394.SAR
08/03/2004 06:03p 50,455,982 EP6PORTAL04_0-20000394.SAR
Regards,
Vladimir -
WEB and WIKI Error after Feb2012 server update
Anyone else having server WEB, Wiki and certificate problems after the last update?
I got this from the log file. Maybe it will help finding the problem.
Feb 27 00:19:54 xxvxx servermgrd[6491]: servermgr_web: XSWebConfig read failed; detail:Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
undefined method `downcase' for nil:NilClass
." UserInfo=0x7fc533d6ad50 {NSLocalizedDescription=Failed to read settings: Exception:
undefined method `downcase' for nil:NilClass -
Re-trigger failed proxy message after certain time automatically in CRM
Hi experts,
Can anyone tell me if we can automate the process of re-triggering failed proxy messages in SAP CRM sxmb_moni, say after a certain period of time.
Thanks
Swapna .Hi Gigi,
As stated in one of the blog (/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically):
For automatic qRfc failure recovery, Schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues.
Also, refer the following threads for more information on this topic:
Re-Process failed XI Messages Automatically
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm -
Hello,
We have reports that we have built that are causing a Proxy error, but really its a timeout error. I have installed a stand alone OC4J and it runs fine there, thus I know its not the OC4J causing the error. In the log files I find this:
- java.sql.SQLException: Io exception: Socket read timed out
I have increased the Client Request Handling setting, but that does not help. Consistently any report taking longer than 5 minutes throws back the 502 Proxy Error.
This did not occur until after an upgrade from 9.0.4 to 10.1.2. Does anyone know of a setting that I'm overlooking that is causing this timeout.
Thanks for your time.Hello,
We have reports that we have built that are causing a Proxy error, but really its a timeout error. I have installed a stand alone OC4J and it runs fine there, thus I know its not the OC4J causing the error. In the log files I find this:
- java.sql.SQLException: Io exception: Socket read timed out
I have increased the Client Request Handling setting, but that does not help. Consistently any report taking longer than 5 minutes throws back the 502 Proxy Error.
This did not occur until after an upgrade from 9.0.4 to 10.1.2. Does anyone know of a setting that I'm overlooking that is causing this timeout.
Thanks for your time. -
Exchange proxy error after exchange reboot from Outlook
I hope the title isn't too confusing. I have a situation where a client has about 40 computers. The machines are left on most of the time. Outlook is open most of the time. If the Exchange (2010) server is rebooted when a client
goes to look at e-mail they get a proxy error message and are asked to log in again. This did not happen in the past (perhaps 7 months ago) but does now. This is not a big problem but users are accustomed to things being easy.
Is this a security feature that worked its way in or is this a fixable problem?Hi,
Was the user using Outlook in Online Mode? If so, the user might get the notice that the connection to Exchange was lost. Switch to Cached Exchange Mode, this should enable the users to work "offline".
To switch to Cached Exchange mode: File -> Account Settings -> Account Settings -> Double click on the Exchange Account name -> Tick "Use Cached Exchange Mode" -> Next -> Finish. Then exit and restart Outlook to check the result.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
EHP4 Apprasisal error after patching
Hi Folks,
We have applied hr support patches from 20 to 28 in our system . After this we are facing issue related to ehp4 appraisal application - the error we are getting in sicf while accessing the service -hap_start_page_powl_ui_ess
The following error text was processed in the system SRD : Access via 'NULL' object reference not possible.
The error occurred on the application server xxx_SRD_xxx and in the work process 0 .
The termination type was: RABAX_STATE
When we have checked the same in portal facing the below issues -
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
I have checked all the threads related to this issue found some replies :
Checking in tcode -lpd_cust - did not solve our problem
Applying the note - 1386141 , not sure about this..
Can any one please share their experices on this could be a great help.
Thanks
Kumar>
kumar Rag wrote:
> Hi Folks,
>
> We have applied hr support patches from 20 to 28 in our system . After this we are facing issue related to ehp4 appraisal application - the error we are getting in sicf while accessing the service -hap_start_page_powl_ui_ess
>
> The following error text was processed in the system SRD : Access via 'NULL' object reference not possible.
> The error occurred on the application server xxx_SRD_xxx and in the work process 0 .
> The termination type was: RABAX_STATE
>
> When we have checked the same in portal facing the below issues -
>
> There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
>
> I have checked all the threads related to this issue found some replies :
>
> Checking in tcode -lpd_cust - did not solve our problem
>
> Applying the note - 1386141 , not sure about this..
>
> Can any one please share their experices on this could be a great help.
>
>
> Thanks
> Kumar
Hi,
I am not sure how this hap_start_page_powl_ui_ess is accessed. Looks to me that the application is being called with out the Configuration HAP_START_PG_POW_MSS_AC
Try to start this application using the url parameter &sap-wd-configId = HAP_START_PG_POW_MSS_AC
or
open this application and application parameter WDCONFIGURATIONID = HAP_START_PG_POW_MSS_AC
or
if you use portal iView then use this HAP_START_PG_POW_MSS_AC in the iView property. -
ORA-12560: TNS:protocol adapter error after patch 9.2.0.7 on Windows2K
I just install the patch 9.2.0.7 for client Oracle machine on windows 2000 server.
Since then I'm constantly getting "ORA-12560: TNS:protocol adapter error" and I cannot connect via SQL plus.
Any help is appreciated, mjI'm trying to connect to databases that are running on a separate machines - aix5.2, and I can connect from every other machine in the office but not from this one.
There's no database on this machine - only Oracle client tools installed with 9.2.0.1 and then updated to 9.2.0.7. Before the update the sqlplus was working just fine. After the patch run, I'm not able to connect viw sqlplus.
There were no errors when running the patch.
Thanks a lot,mj -
Collaboration Launch Pad Configuration Error with Patch 27.
Hi all,
After applying Patch 27 for EP6 SP2 (both platform and
KMC), I can't launch Collaboration Launch Pad Configuration
iview, the following error retrieved:
Nov 24, 2004 2:03:13 PM # PRT-Async 3 Fatal Exception ID:02:03_24/11/04_0004
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/
com.sap.netweaver.coll.colcontent/com.sap.netweaver.coll.clp/com.sap.netweaver.coll.config.clp
Component class : com.sapportals.portal.prt.component.config.ConfigComponent
User : epadmin
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:853)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:311)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:479)
Caused by: java.lang.NullPointerException
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:63)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:135)
at com.sapportals.portal.prt.component.config.ConfigComponent.doContent(ConfigComponent.java:49)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:479)
Any suggestions?
Thanks,
YMHi Yuri,
the problem with the ConfigComponent also should be fixed with Hotfix 1 (also worked for me).
See note 792995: Major problems fixed with this Patch 27 Hotfix 1: [...] Config : After upgrading to Portal SP2 Patch 27 the configuration iView did not work.
Hope it helps
Detlev -
ABAP Consumer Proxy error after upgraded from 7.0 SP14 to 7.01 SP3
The ABAP consumer proxy was created in ECC6 with Netweaver 7.0 SP14. After the system was upgraded to Netweaver 7.01 SP3 the proxy call started to get error back.
The first error message from the service provider said "SoapException: Server did not recognize the value of HTTP Header SOAPAction". This error was resolved by manually putting the correct action in the SOAManager configuration.
Ran the same test again and then the service provider complained about the To field in the SOAP Header. The error message said "SoapHeaderException: SOAP header To was not understood".
Below is the To field in the Requesting XML message from the 7.0 SP14 system that worked fine:
<n3:To soap-env:mustUnderstand="1" xmlns:n3="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope">
http://localhost:50081/AddSix.asmx
</n3:To>
Below is the To field in the Requesting XML message from the 7.01 SP3 system that did not work:
<wsa:To soap-env:mustUnderstand="1" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope">
http://localhost:50081/AddSix.asmx
</wsa:To>
It looks like the issue is with the xmlns:soap-env element that has different values in these two systems. Searched in SDN but could not find any related information. Please help if anyone has experienced similar issue or knows how to fix it.
Thanks,
JiannanGot solution from SAP through an OSS message. Below is SAP's solution:
Either the Message ID protocol should be switched off on the SAP
consumer side or turn on this protocol support on the .NET provider.
To switch off the Message ID protocol:
1. start the soa manager
2. find the consumer proxy
3. find the corresponding logical port
4. jump to the 'Messaging' tab
5. choose the 'Suppress ID Transfer' from the dropdown list of the Message ID Protocol field
Besides this setting I also have to specify the operation in the Operation specific tab of the logical port configuration. -
After installing .NET PDK 1.0 Patch 3 and deploying a newly created Hello World application with VS .NET (SAP Portal Add-in), I run the application from the Component Inspector in the Porta. I receive the following error upon the loading of the new component:
Line 8: <add assembly="SAP.Portal.Web.UI, Version=1.2.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23" />
Line 9: <add assembly="SAP.Web, Version=1.2.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23" />
Line 10: <add assembly="SAP.Connector, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23" />
Line 11: <add assembly="SAP.Connector.Rfc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23" />
Line 12: </assemblies>
Source File: C:\Program Files\SAP\Portal Runtime for Microsoft .NET\Server00\PortalApps\web.config Line: 10
Assembly Load Trace: The following information can be helpful to determine why the assembly 'SAP.Connector' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = SAP.Connector, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23
(Fully-specified)
LOG: Appbase = C:\Program Files\SAP\Portal Runtime for Microsoft .NET\Server00\
LOG: Initial PrivatePath = NULL
Calling assembly : System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a.
===
LOG: Publisher policy file is not found.
LOG: Host configuration file not found.
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: SAP.Connector, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23
LOG: Attempting download of new URL file:///C:/Program Files/SAP/Portal Runtime for Microsoft .NET/Server00/SAP.Connector.DLL.
LOG: Attempting download of new URL file:///C:/Program Files/SAP/Portal Runtime for Microsoft .NET/Server00/SAP.Connector/SAP.Connector.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/epapp1400/bd0b9ac2/6d57f054/SAP.Connector.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/epapp1400/bd0b9ac2/6d57f054/SAP.Connector/SAP.Connector.DLL.
LOG: Attempting download of new URL file:///C:/Program Files/SAP/Portal Runtime for Microsoft .NET/Server00/SAP.Connector.EXE.
LOG: Attempting download of new URL file:///C:/Program Files/SAP/Portal Runtime for Microsoft .NET/Server00/SAP.Connector/SAP.Connector.EXE.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/epapp1400/bd0b9ac2/6d57f054/SAP.Connector.EXE.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/epapp1400/bd0b9ac2/6d57f054/SAP.Connector/SAP.Connector.EXE.Hi,
Can you give some more info?
- Did you install a fresh run-time and dev add in or was it an "upgrade" installation?
- Are you running it in "debug" (F5) or have you deployed the project and are running it from the portal... or something else?
- By "newly created application" did you create a completly new project or cleared an old file?
- are you using a SAP Connector in this "hello World"?
- If yes - What connector version have you installed on your dev machine?
Please, in the mean time, also try to do a "repair" on both msi installations (run-time machine and Dev machine).
Regards,
Ofer -
Export errors after patch Database9i 9.2.0.1 to 9.2.0.5
Dear OTN,
I have problems with exports after appliying the patch 9.2.0.5 to 9.2.0.1. The database was created new under the new release.
Solaris 8
For example:
$ exp seguridad/seguridad@silim owner=seguridad file=prueba2.dmp
Export: Release 9.2.0.5.0 - Production on Wed Aug 11 14:17:16 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SEGURIDAD
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SEGURIDAD
About to export SEGURIDAD's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
If I execute a full the error terminate with:
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
EXP-00008: ORACLE error 1041 encountered
ORA-01041: internal error. hostdef extension doesn't exist
EXP-00000: Export terminated unsuccessfully
But if I execute table by table the export work fine!!!
Please any help with this are welcome!!
Best regards,
Alfredo.Normally the export error on EMIT_SCHEMA can happen if the catpatch.sql script was not run successfully after a patchset install.
See Note:232120.1 on MetaLink
Login as SYSDBA and run catpatch.sql (without other users logged in).
Maybe you are looking for
-
Someone please help me out, this is for a project and i'm clueless on what i should do.
-
How to create Infotype entry in table T777D
Hi All, We have undergone Upgrade from 4.6C to ECC 6.0. Now we get an error while maintaining certain data infotype 0122 does not exists. I looked at the entries in table T777D in both the system. In older system the entry is there but not in the new
-
Recording for a LSMW: item pricing conditions
Hi Experts, I need your help! I am trying to do a recording for modifying sales orders conditions (for items): VA02, item 10, GO TO PRICING CONDITION ZXXX, change value to Z, go to item 20, GO TO PRICING CONDITION ZXXX, change value to Z,.... My ques
-
I have purchased Adobe Reader but when I try to open a document sent in pdf form I cannot open it up at all. Where am I going wrong? Chris
-
How do I set font default in aperture?
how do I set font default in aperture?