NMAS Launch Failed

Hello NG
Sorry I posted this question also in the
novell.support.modular-authentication-services forum. I think this place is
the better place to post this question
In Our environment we have the following OS and components installed
Netware 6.5 SP4
Edir 8.7.3.7
Border Manager 3.8 SP4
Nmas.nlm 2.60.18
Proxy.nlm 5.00.14
When Proxy is startet through startbrd, on the console the following error
is displayed.
Proxy-5.0-107
NMAS Launch Failed, Proxy Authentication Services down
When I unload the proxy.nlm the error message is not more present.
I checked the timesync and it seam to be ok. I reinstalled nmas only the
server installation from the BM3.8 CD but this didn't also solve the problem
How can I solve this problem? Some ideas?
Ramon Lustrati

Hello Craig
Thank you for the TID. It was helpful. IN our LPO we had a CIFS Policy that
caused the problem. Now the problem is solved.
Ramon Lustrati
"Craig Johnson" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
> In article <5Bmjf.232$[email protected]>, Ramon Lustrati
> wrote:
>> A valic Login Policy? How should I configure this policy? Which setting
>> should be set?
>>
> I'm not sure you have an LPO issue, but have a look at this tid. See if
> any of those things that are mentioned are there - if so, the LPO is
> probably fine.
>
> http://support.novell.com/cgi-bin/se...i?10091495.htm
>
> Do you have a replica on the server?
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
>

Similar Messages

"NMAS Launch Failed" proxy error after patching server

Just applied NW65 sp2 server patch and the Border Manager 3.8 field patch
3c and now the server constantly beeps with the error message:
NMAS LAUNCH FAILED - PROXY AUTHENTICATION SERVICES DOWN
I have seen this on other servers recently patched but it generally goes
away after a couple of minutes. In this particular case, doesn't matter
what we do - reboot server, unload and reload proxy we still get this error
message every 20 seconds or so. Very annoying. If we unload proxy, the
error goes away but then of course we don't have a proxy server. Surely
there must be some simple solution for this? Thank you.
Don

You should post this to the BorderManager Proxy group.
(novell.support.bordermanager.proxies)
>>> <[email protected]> 1/28/2005 9:16:56 AM >>>
Just applied NW65 sp2 server patch and the Border Manager 3.8 field patch
3c and now the server constantly beeps with the error message:
NMAS LAUNCH FAILED - PROXY AUTHENTICATION SERVICES DOWN
I have seen this on other servers recently patched but it generally goes
away after a couple of minutes. In this particular case, doesn't matter
what we do - reboot server, unload and reload proxy we still get this error
message every 20 seconds or so. Very annoying. If we unload proxy, the
error goes away but then of course we don't have a proxy server. Surely
there must be some simple solution for this? Thank you.
Don

CS5 Master Collection - launcher failed??

Anyone have an idea why the trial launcher for CS5 MC fails to initialize? File not found? The log file shows this...
5/1/2010 22:20:35 [INFO] Setup - Start Adobe Setup
5/1/2010 22:20:35 [INFO] Setup - TimeLog: Bootstrapper Start
5/1/2010 22:20:35 [INFO] Setup - TimeLog: Start initial checks
5/1/2010 22:20:35 [INFO] Setup - Dictionary Path: C:\Adobe CS5\resources\Dictionary\en_US\stringTable.zdct
5/1/2010 22:20:35 [INFO] PIM - Trying to access xml at path:C:\Adobe CS5\resources\setup.xml
5/1/2010 22:20:35 [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154
5/1/2010 22:20:35 [FATAL] Setup - Could not initialize ADXML object
5/1/2010 22:20:35 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
5/1/2010 22:20:36 [INFO] Setup - End Adobe Setup. Exit code: 0
I don't get it - anyone can help?
Thanks.

Hi David - tried a reply to your email but it came back as undeliverable to the reply email address.
Thanks for taking the time to try and help. I didn't find a lot on the web with regards to this product. I don't think it's a corrupt file as the same trial files installed on other systems just fine. More on that below.
I did find a support article on Adobe discussing bootstrapper failed launches but it didn't provide any specific info. Just said bootstrapper looked for certain conditions/files on the system when launching but not what conditions etc. It said to run the CS5 cleaner but it doesn't find anything on the system because CS5 hasn't even been installed. Doesn't get that far. Install/launcher fails right after running setup. The Adobe Support Advisor app doesn't find anything either when I ran it even though the error message instructs me to run it to see what is wrong. I'm running a WinXP Pro SP3 32bit system, 4gb mem, and 500gb HD, 9800GT Nvidia etc etc.
I tried installing the CS5 trial on two different systems though at a friend's place. One was a Win7 x64 and the other a WinXP 32bit Home Edition. It lauched and installed fine on both those systems. I had another friend install this same windows trial CS5 version on his MAC even and that went fine. In all cases this is the same CS5 trial files I can't seem to initiate on my system.
I tried turning off the firewall, antivirus and any other malware app/protection running. Nothing. Tried an install in safe mode - nothing. I even ran CS3 and CS4 cleaners just to see what they turned up which was nothing. I also tried turning off all background services using the msconfig method described on the forum here.
Honestly I have no clue what to do at this point. I figure I'm going to have to do a clean install of the OS on a hard drive and try installing the trial CS5 then and see what happens.
Thanks again for helping!

Launch Failed !ApolloLaunchDelegate.fileDoesNotExist! in Flash Builder when debugging AIR apps

Hi Everyone,
I've been using flash/flex builder for years, but have never tried to create an AIR application before. I tried to create a 'hello' world app before porting some of my stuff over by following the instructions here:
http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118676a28bd-8000. html
but when I try to debug the code I get the a 'Launch Failed' dialog with the unhelpful comment '!ApolloLaunchDelegate.fileDoesNotExist!'.
I'm running win7x64, SDK 4.1
I've tried all sorts of different AIR files, including the default when you just create an empty project, and converting copies of some of my existing flex projects to desktop, but they all give the same message.
Google doesn't help. Any ideas would be gratefully recieved.
kenneth
EDIT: just tried the same thing on my same version of flash builder on my laptop and it works... The laptop runs Vistax64. The only other different is that when I selected SDK 4.1 in the new project dialog it said it needed AIR 2.0, whereas on this machine is said it needed AIR 1.5
Message was edited by: kennethGilpin

Hi Anirudh,
Thank you for your reply.
My flash builder says that it is version 4.0 (build 272416). When I checked for updates it said my program was up to date.
There is a copy of the *-app.xml and .swf in the bin-debug folder
There are no errors reported in the 'problems' view.
kenneth
EDIT: just checked the version on my laptop, says version 4.0.1 (build 277662)
EDIT: I manually upgraded to version 4.0.1 and this fixed the problem.

Can you solve the error ? FlashBuilder 4 :launch failed : Illegal character in path at index 41

Hi
when I am going to run an application (even a simple blank mxml one) , the flashbulider is saying the follows:
Launch failed
Illegal character in path at index 41
file:///......bin-debug/Main.html

cant access your stuff maybe paste it in pastie.org

ITunes Launch Failed When trying to authorize Disney Digital Copy

I recently bought two older Disney Movies Tangled and Up that used the old disc based method for authorizing a digital copy. On both movies, after selecting the itunes option, i recieve the error below:
iTunes Launch Failed.
Your iTunes software is either out
of date, not currently installed in your computer, or does not meet the minimum
system requirements. Click
here to download the latest version of iTunes. If you experience problems
with the iTunes software, please contact Apple support at http://www.apple.com/support/itunes.
This seems to be related to the new iTunes version 12.1.1 since this disc based authentication worked on ver 11 and 10 for me on the same computer. I have tried on multiple machines all running the 12.1.1 version with the same results (dont have any with the old version )
The are all running windows 7 64 bit. I attempted to redeem using the option in itunes directly and digitalcopyplus but it states i must authenticate with the disc.

I tried extracting the DVD contents and editing the xml to remove the version number but to no avail. I am in the right place to get an answer for this issue?

Launch failed with error code -2857

I've been running an app (EPSON Scan) for awhile without any significant problems. Today I check the Epson web site and they had an update for the app. So, I downloaded it, installed it, and tried to run it. Unfortunately, all I got was a couple of bounces in the Dock and nothing. I then went to the console and found the "launch failed with error code -2857" message. I've researched that as best I could and found that it is probably a problem with the application bundle. So, I opened the package, drilled down to the Mac OS folder, and double clicked on the EPSON Scan terminal command located there. Bing, a terminal window opened and the application launched and runs fine. So, the questions is, how do I resolve the CFM not finding the application correctly? I've run a pre-bind on everything but that didn't work. Seems to me like there is some config file that is not set up properly. I looked at the Info.plist file and I don't see any glaring problems. Any ideas? Epson also go a copy of this note...

First I want to say thanks for the feedback. I appreciate the support and helpful suggestions.
Second, Epson sent me an answer of sorts...they provided detailed instructions on uninstalling the application and then told me to reinstall using the disk image from their web site (in other words, don't use their web package to "update" and existing installation). I did this and things seem to be running fine now. It's unfortunate that their update instructions don't say to do this in the first place (maybe I missed it ).
So at one level this issue is solved. Unfortunately I'm too curious and wanted to know why the error happend in the first place. As a software developer myself (mainframe and midrange server based) I hate the "delete and reinstall" answer as it does nothing to really identify and solve the real problem. But I do also appreciate the idea of "just get it fixed fast" so that's what I did.
Anyway, I will now spend some time learning about Launch Services to see if I can get a more specific understanding of what happened.
Thanks again for the help.
24" iMac, 2GB Memory, etc Mac OS X (10.4.8) 20" iMac, two MacBooks, one Dual Core Mac Mini

Application launch failed. Ensure that the device screen is unlocked - after the phone update

I have the following error "
Error 1 Application launch failed. Ensure that the device screen is unlocked and device is developer unlocked. For details on developer unlock, visit http://go.microsoft.com/fwlink/?LinkId=195284. 0 0
I'm pretty sure it happened after the last update. I was able to use my phone as a dev one before
and my account shows it as a registered device.
The OS version is 7.10.8107.79.
The steps that I tired
-Registered again my phone with the registration tool
-Check the issue with Zune auto-launcher (zune isn't syncing and the phone is connected)
-Close and start everything again
Other possible issues
- Do I have to have sdk 7.1 to deploy?
- Do I have to wait 24h for registration?

You should be using SDK 7.1 anyway, so install that.
After the update, the phone may have locked itself. This may not be reflected in your AppHub account though. Using the Developer Registration Tool, register the device, unregister it, then register it again.

Launch Failed and Problem on bin-Debug folder

I have downloaded flex_sdk_4.0.0.14159 and configure it up in Flex 3 via Windows>Preferences>Flex>Installed Flex Sdks.
The project was done in Flex Builder 3, so I have changed the settings in Project>Properties>Flex Complier>Use a specific SDK:Flex 4
The bin-debug and html-template folders are created, but the bin-debug folder does not seem to create all the necessary files. There are no .swf or .html files.
Hence, when I try launch the application, I get a Launch failed, file not found error message as follows:
File not found: file:/C:/Documents%20and%20Settings/Administrator/My%20Documents/Flex%20Builder%203/test2 /bin-debug/test2.html
I have tried the following:
Project->Properties->Run/Debug Settings->APP_NAME->Edit...
where Url path is correct. But still facing problem
Project>Properties>flex compiler>use a spacific sdk and I have select Flex 4 there
I'm obviously missing something simple....but I cant figure out what.
Any help greatly appreciated.

How did you fix your problem? I'm facing the same
Thanks

"Catalog launch failed" using PSE 5 on Windows 7

I loaded PSE 5 on a new Windows 7 computer and was in process of transferring catalog from old computer to new one using external hard drive with backedup files. I was able to restore the files successfully to the new hard drive on the new computer (using the Restore Catagog function in the organizer). But now the Organizer will not open in PSE 5 - I get a pop-up window "Catalog launch failed". I also reinstalled PSE 5 to see if that would help, but same behavior continued. Anyone have suggestions to help? Thanks.

Thanks for the suggestions. Tried the first option - didn't work. Was planning to also upgrade to PSE 8 - so installed that and was able to convert the catalog to PSE 8 so now things are working well on PSE 8.

[SOLVED] Xorg launch fails due to synaptics protocol issue

Hey gang!
So this is an issue which first appeared after a recent pacman -Syu. I had gone too long without one and so many many packages were upgraded.
I first tried rolling back the kernel but when that didn't help I resolved to get it working with the newest packages. I am on a macbook pro. I tried installing the xf86-input-mtrack-git package from the AUR but this just caused xorg errors in addition to the others. I am using the fx86-input-synaptics package from the standard repos which, as I said, worked for me in the past.
Here are some files I think are relevent:
Xorg.0.log (contains output from one failed Xorg launch):
[ 2522.432]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 2522.433] X Protocol Version 11, Revision 0
[ 2522.433] Build Operating System: Linux 3.1.1-1-ARCH x86_64
[ 2522.433] Current Operating System: Linux myhost 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011 x86_64
[ 2522.433] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sda4 ro nomodeset
[ 2522.433] Build Date: 16 November 2011 11:24:04AM
[ 2522.433]
[ 2522.433] Current version of pixman: 0.24.0
[ 2522.433] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2522.433] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2522.433] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 13 23:14:33 2011
[ 2522.433] (==) Using config file: "/etc/X11/xorg.conf"
[ 2522.433] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2522.434] (==) ServerLayout "Layout0"
[ 2522.434] (**) |-->Screen "Screen0" (0)
[ 2522.434] (**) | |-->Monitor "Monitor0"
[ 2522.434] (**) | |-->Device "Device0"
[ 2522.434] (**) |-->Input Device "Mouse0"
[ 2522.434] (**) |-->Input Device "Keyboard0"
[ 2522.434] (**) |-->Input Device "SynapticsTouchpad"
[ 2522.434] (**) Option "Xinerama" "on"
[ 2522.434] (==) Automatically adding devices
[ 2522.434] (==) Automatically enabling devices
[ 2522.434] (**) Xinerama: enabled
[ 2522.434] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2522.434] Entry deleted from font path.
[ 2522.434] (**) FontPath set to:
/usr/share/fonts/local,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2522.434] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2522.434] (**) Extension "Composite" is disabled
[ 2522.434] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2522.434] (WW) Disabling Mouse0
[ 2522.434] (WW) Disabling Keyboard0
[ 2522.434] (II) Loader magic: 0x7ccae0
[ 2522.434] (II) Module ABI versions:
[ 2522.434] X.Org ANSI C Emulation: 0.4
[ 2522.434] X.Org Video Driver: 11.0
[ 2522.434] X.Org XInput driver : 13.0
[ 2522.434] X.Org Server Extension : 6.0
[ 2522.435] (--) PCI:*(0:2:0:0) 10de:0647:106b:00bc rev 161, Mem @ 0xe4000000/16777216, 0xc0000000/268435456, 0xe2000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 2522.435] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2522.435] (II) "extmod" will be loaded by default.
[ 2522.435] (II) "dbe" will be loaded by default.
[ 2522.435] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 2522.435] (II) "record" will be loaded by default.
[ 2522.435] (II) "dri" will be loaded by default.
[ 2522.435] (II) "dri2" will be loaded by default.
[ 2522.435] (II) LoadModule: "synaptics"
[ 2522.435] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2522.436] (II) Module synaptics: vendor="X.Org Foundation"
[ 2522.436] compiled for 1.11.0, module version = 1.5.0
[ 2522.436] Module class: X.Org XInput Driver
[ 2522.436] ABI class: X.Org XInput driver, version 13.0
[ 2522.436] (II) LoadModule: "glx"
[ 2522.436] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2522.448] (II) Module glx: vendor="NVIDIA Corporation"
[ 2522.448] compiled for 4.0.2, module version = 1.0.0
[ 2522.448] Module class: X.Org Server Extension
[ 2522.448] (II) NVIDIA GLX Module 290.10 Wed Nov 16 18:01:24 PST 2011
[ 2522.448] (II) Loading extension GLX
[ 2522.448] (II) LoadModule: "extmod"
[ 2522.448] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2522.448] (II) Module extmod: vendor="X.Org Foundation"
[ 2522.448] compiled for 1.11.2, module version = 1.0.0
[ 2522.448] Module class: X.Org Server Extension
[ 2522.448] ABI class: X.Org Server Extension, version 6.0
[ 2522.448] (II) Loading extension MIT-SCREEN-SAVER
[ 2522.448] (II) Loading extension XFree86-VidModeExtension
[ 2522.448] (II) Loading extension XFree86-DGA
[ 2522.448] (II) Loading extension DPMS
[ 2522.448] (II) Loading extension XVideo
[ 2522.448] (II) Loading extension XVideo-MotionCompensation
[ 2522.448] (II) Loading extension X-Resource
[ 2522.448] (II) LoadModule: "dbe"
[ 2522.449] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2522.449] (II) Module dbe: vendor="X.Org Foundation"
[ 2522.449] compiled for 1.11.2, module version = 1.0.0
[ 2522.449] Module class: X.Org Server Extension
[ 2522.449] ABI class: X.Org Server Extension, version 6.0
[ 2522.449] (II) Loading extension DOUBLE-BUFFER
[ 2522.449] (II) LoadModule: "record"
[ 2522.449] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2522.449] (II) Module record: vendor="X.Org Foundation"
[ 2522.449] compiled for 1.11.2, module version = 1.13.0
[ 2522.449] Module class: X.Org Server Extension
[ 2522.449] ABI class: X.Org Server Extension, version 6.0
[ 2522.449] (II) Loading extension RECORD
[ 2522.449] (II) LoadModule: "dri"
[ 2522.449] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2522.449] (II) Module dri: vendor="X.Org Foundation"
[ 2522.449] compiled for 1.11.2, module version = 1.0.0
[ 2522.449] ABI class: X.Org Server Extension, version 6.0
[ 2522.449] (II) Loading extension XFree86-DRI
[ 2522.449] (II) LoadModule: "dri2"
[ 2522.449] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2522.449] (II) Module dri2: vendor="X.Org Foundation"
[ 2522.449] compiled for 1.11.2, module version = 1.2.0
[ 2522.449] ABI class: X.Org Server Extension, version 6.0
[ 2522.449] (II) Loading extension DRI2
[ 2522.449] (II) LoadModule: "nvidia"
[ 2522.449] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2522.450] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2522.450] compiled for 4.0.2, module version = 1.0.0
[ 2522.450] Module class: X.Org Video Driver
[ 2522.450] (II) LoadModule: "synaptics"
[ 2522.450] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2522.450] (II) Module synaptics: vendor="X.Org Foundation"
[ 2522.450] compiled for 1.11.0, module version = 1.5.0
[ 2522.450] Module class: X.Org XInput Driver
[ 2522.450] ABI class: X.Org XInput driver, version 13.0
[ 2522.450] (II) NVIDIA dlloader X Driver 290.10 Wed Nov 16 17:41:10 PST 2011
[ 2522.450] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2522.450] (--) using VT number 7
[ 2522.453] (II) Loading sub module "fb"
[ 2522.453] (II) LoadModule: "fb"
[ 2522.453] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2522.453] (II) Module fb: vendor="X.Org Foundation"
[ 2522.453] compiled for 1.11.2, module version = 1.0.0
[ 2522.453] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2522.453] (II) Loading sub module "wfb"
[ 2522.453] (II) LoadModule: "wfb"
[ 2522.453] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2522.453] (II) Module wfb: vendor="X.Org Foundation"
[ 2522.453] compiled for 1.11.2, module version = 1.0.0
[ 2522.453] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2522.453] (II) Loading sub module "ramdac"
[ 2522.453] (II) LoadModule: "ramdac"
[ 2522.453] (II) Module "ramdac" already built-in
[ 2522.453] (WW) NVIDIA: Xinerama is enabled, so RandR has likely been disabled by the
[ 2522.453] (WW) NVIDIA: X server.
[ 2522.453] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2522.453] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2522.453] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2522.453] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2522.453] (==) NVIDIA(0): RGB weight 888
[ 2522.453] (==) NVIDIA(0): Default visual is TrueColor
[ 2522.453] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2522.453] (**) NVIDIA(0): Enabling 2D acceleration
[ 2523.806] (II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
[ 2523.806] (II) NVIDIA(GPU-0): Vision stereo.
[ 2523.808] (II) NVIDIA(0): NVIDIA GPU GeForce 9600M GT (G96) at PCI:2:0:0 (GPU-0)
[ 2523.809] (--) NVIDIA(0): Memory: 262144 kBytes
[ 2523.809] (--) NVIDIA(0): VideoBIOS: 62.94.58.00.17
[ 2523.809] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2523.809] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 2523.809] (--) NVIDIA(0): Connected display device(s) on GeForce 9600M GT at PCI:2:0:0
[ 2523.809] (--) NVIDIA(0): Apple Color LCD (DFP-0)
[ 2523.809] (--) NVIDIA(0): Apple Color LCD (DFP-0): 330.0 MHz maximum pixel clock
[ 2523.809] (--) NVIDIA(0): Apple Color LCD (DFP-0): Internal Dual Link LVDS
[ 2523.811] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[ 2523.811] (**) NVIDIA(0): enabled on all display devices.
[ 2523.849] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 2523.849] (==) NVIDIA(0):
[ 2523.849] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 2523.849] (==) NVIDIA(0): will be used as the requested mode.
[ 2523.849] (==) NVIDIA(0):
[ 2523.849] (II) NVIDIA(0): Validated modes:
[ 2523.849] (II) NVIDIA(0): "nvidia-auto-select"
[ 2523.849] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 2524.909] (--) NVIDIA(0): DPI set to (110, 108); computed from "UseEdidDpi" X config
[ 2524.909] (--) NVIDIA(0): option
[ 2524.909] (--) Depth 24 pixmap format is 32 bpp
[ 2524.909] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 2524.916] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2524.916] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2524.916] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2524.916] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2524.916] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2524.916] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2524.916] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2524.916] (II) NVIDIA(0): Config Options in the README.
[ 2524.918] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 2525.208] (II) Loading extension NV-GLX
[ 2525.246] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2525.246] (==) NVIDIA(0): Backing store disabled
[ 2525.246] (==) NVIDIA(0): Silken mouse enabled
[ 2525.247] (**) NVIDIA(0): DPMS enabled
[ 2525.247] (II) Loading extension NV-CONTROL
[ 2525.247] (II) Loading sub module "dri2"
[ 2525.248] (II) LoadModule: "dri2"
[ 2525.248] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2525.248] (II) Module dri2: vendor="X.Org Foundation"
[ 2525.248] compiled for 1.11.2, module version = 1.2.0
[ 2525.248] ABI class: X.Org Server Extension, version 6.0
[ 2525.248] (II) NVIDIA(0): [DRI2] Setup complete
[ 2525.248] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2525.248] (==) RandR enabled
[ 2525.248] (II) Initializing built-in extension Generic Event Extension
[ 2525.248] (II) Initializing built-in extension SHAPE
[ 2525.248] (II) Initializing built-in extension MIT-SHM
[ 2525.248] (II) Initializing built-in extension XInputExtension
[ 2525.248] (II) Initializing built-in extension XTEST
[ 2525.248] (II) Initializing built-in extension BIG-REQUESTS
[ 2525.248] (II) Initializing built-in extension SYNC
[ 2525.248] (II) Initializing built-in extension XKEYBOARD
[ 2525.248] (II) Initializing built-in extension XC-MISC
[ 2525.248] (II) Initializing built-in extension SECURITY
[ 2525.248] (II) Initializing built-in extension XINERAMA
[ 2525.248] (II) Initializing built-in extension XFIXES
[ 2525.248] (II) Initializing built-in extension RENDER
[ 2525.248] (II) Initializing built-in extension RANDR
[ 2525.248] (II) Initializing built-in extension COMPOSITE
[ 2525.248] (II) Initializing built-in extension DAMAGE
[ 2525.248] (II) Initializing extension GLX
[ 2525.341] (II) Using input driver 'synaptics' for 'SynapticsTouchpad'
[ 2525.341] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2525.341] (**) Option "AlwaysCore" "true"
[ 2525.341] (**) Option "SendCoreEvents"
[ 2525.341] (**) SynapticsTouchpad: always reports core events
[ 2525.696] (--) synaptics: SynapticsTouchpad: auto-dev sets device to /dev/input/event6
[ 2525.803] (**) Option "Device" "/dev/input/event6"
[ 2525.909] (--) synaptics: SynapticsTouchpad: x-axis range 0 - 1280
[ 2525.909] (--) synaptics: SynapticsTouchpad: y-axis range 0 - 800
[ 2525.909] (--) synaptics: SynapticsTouchpad: pressure range 0 - 256
[ 2525.909] (--) synaptics: SynapticsTouchpad: finger width range 0 - 0
[ 2525.909] (--) synaptics: SynapticsTouchpad: buttons: left double triple
[ 2525.909] (--) synaptics: SynapticsTouchpad: Vendor 0x5ac Product 0x236
[ 2525.909] (**) Option "SHMConfig" "true"
[ 2525.909] (**) Option "VertTwoFingerScroll" "true"
[ 2525.909] (**) Option "HorizTwoFingerScroll" "true"
[ 2525.909] (**) Option "TapButton1" "1"
[ 2525.909] (**) Option "TapButton2" "3"
[ 2525.910] (**) Option "TapButton3" "2"
[ 2525.910] (**) Option "ClickFinger1" "1"
[ 2525.910] (**) Option "ClickFinger2" "3"
[ 2525.910] (**) Option "ClickFinger3" "2"
[ 2525.999] (--) synaptics: SynapticsTouchpad: touchpad found
[ 2525.999] (**) SynapticsTouchpad: always reports core events
[ 2526.106] (II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD, id 6)
[ 2526.106] (**) synaptics: SynapticsTouchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 2526.106] (**) synaptics: SynapticsTouchpad: MaxSpeed is now 1.75
[ 2526.106] (**) synaptics: SynapticsTouchpad: AccelFactor is now 0.133
[ 2526.106] (**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
[ 2526.106] (**) SynapticsTouchpad: (accel) acceleration profile 1
[ 2526.106] (**) SynapticsTouchpad: (accel) acceleration factor: 2.000
[ 2526.106] (**) SynapticsTouchpad: (accel) acceleration threshold: 4
[ 2526.111] (--) synaptics: SynapticsTouchpad: touchpad found
[ 2526.113] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2526.113] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2526.113] (II) LoadModule: "evdev"
[ 2526.113] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2526.113] (II) Module evdev: vendor="X.Org Foundation"
[ 2526.113] compiled for 1.10.99.902, module version = 2.6.0
[ 2526.113] Module class: X.Org XInput Driver
[ 2526.113] ABI class: X.Org XInput driver, version 13.0
[ 2526.113] (II) Using input driver 'evdev' for 'Power Button'
[ 2526.113] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2526.113] (**) Power Button: always reports core events
[ 2526.113] (**) Power Button: Device: "/dev/input/event3"
[ 2526.113] (--) Power Button: Found keys
[ 2526.113] (II) Power Button: Configuring as keyboard
[ 2526.113] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2526.113] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2526.113] (**) Option "xkb_rules" "evdev"
[ 2526.113] (**) Option "xkb_model" "evdev"
[ 2526.113] (**) Option "xkb_layout" "us"
[ 2526.135] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2526.135] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2526.135] (II) Using input driver 'evdev' for 'Power Button'
[ 2526.135] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2526.135] (**) Power Button: always reports core events
[ 2526.135] (**) Power Button: Device: "/dev/input/event1"
[ 2526.135] (--) Power Button: Found keys
[ 2526.135] (II) Power Button: Configuring as keyboard
[ 2526.135] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 2526.135] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 2526.135] (**) Option "xkb_rules" "evdev"
[ 2526.135] (**) Option "xkb_model" "evdev"
[ 2526.135] (**) Option "xkb_layout" "us"
[ 2526.135] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 2526.135] (II) No input driver/identifier specified (ignoring)
[ 2526.135] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 2526.135] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2526.135] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2526.135] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2526.135] (**) Sleep Button: always reports core events
[ 2526.135] (**) Sleep Button: Device: "/dev/input/event2"
[ 2526.135] (--) Sleep Button: Found keys
[ 2526.135] (II) Sleep Button: Configuring as keyboard
[ 2526.135] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 2526.135] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 2526.135] (**) Option "xkb_rules" "evdev"
[ 2526.135] (**) Option "xkb_model" "evdev"
[ 2526.135] (**) Option "xkb_layout" "us"
[ 2526.136] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event8)
[ 2526.136] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 2526.136] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 2526.136] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2526.136] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 2526.136] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event8"
[ 2526.136] (--) Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[ 2526.136] (II) Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[ 2526.136] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input8/event8"
[ 2526.136] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 10)
[ 2526.136] (**) Option "xkb_rules" "evdev"
[ 2526.136] (**) Option "xkb_model" "evdev"
[ 2526.136] (**) Option "xkb_layout" "us"
[ 2526.136] (II) config/udev: Adding input device bcm5974 (/dev/input/event6)
[ 2526.136] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 2526.136] (**) bcm5974: Applying InputClass "touchpad catchall"
[ 2526.136] (II) Using input driver 'synaptics' for 'bcm5974'
[ 2526.136] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2526.136] (**) bcm5974: always reports core events
[ 2526.137] (**) Option "Device" "/dev/input/event6"
[ 2526.149] (EE) synaptics: bcm5974: Synaptics driver unable to detect protocol
[ 2526.149] (EE) PreInit returned 11 for "bcm5974"
[ 2526.149] (II) UnloadModule: "synaptics"
[ 2526.149] (II) Unloading synaptics
[ 2526.150] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
[ 2526.150] (II) No input driver/identifier specified (ignoring)
[ 2526.150] (II) config/udev: Adding input device Built-in iSight (/dev/input/event7)
[ 2526.150] (**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
[ 2526.150] (II) Using input driver 'evdev' for 'Built-in iSight'
[ 2526.150] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2526.150] (**) Built-in iSight: always reports core events
[ 2526.150] (**) Built-in iSight: Device: "/dev/input/event7"
[ 2526.150] (--) Built-in iSight: Found keys
[ 2526.150] (II) Built-in iSight: Configuring as keyboard
[ 2526.150] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input7/event7"
[ 2526.150] (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 11)
[ 2526.150] (**) Option "xkb_rules" "evdev"
[ 2526.150] (**) Option "xkb_model" "evdev"
[ 2526.150] (**) Option "xkb_layout" "us"
[ 2526.150] (II) config/udev: Adding input device applesmc (/dev/input/event5)
[ 2526.150] (II) No input driver/identifier specified (ignoring)
[ 2526.151] (II) config/udev: Adding input device applesmc (/dev/input/js0)
[ 2526.151] (II) No input driver/identifier specified (ignoring)
[ 2526.151] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2526.151] (II) No input driver/identifier specified (ignoring)
[ 2526.356] (II) UnloadModule: "synaptics"
[ 2526.356] (II) Unloading synaptics
[ 2526.463] (II) Power Button: Close
[ 2526.463] (II) UnloadModule: "evdev"
[ 2526.463] (II) Unloading evdev
[ 2526.569] (II) Power Button: Close
[ 2526.569] (II) UnloadModule: "evdev"
[ 2526.569] (II) Unloading evdev
[ 2526.676] (II) Sleep Button: Close
[ 2526.676] (II) UnloadModule: "evdev"
[ 2526.676] (II) Unloading evdev
[ 2526.729] (II) Apple Inc. Apple Internal Keyboard / Trackpad: Close
[ 2526.729] (II) UnloadModule: "evdev"
[ 2526.729] (II) Unloading evdev
[ 2526.836] (II) Built-in iSight: Close
[ 2526.836] (II) UnloadModule: "evdev"
[ 2526.836] (II) Unloading evdev
[ 2528.554] Server terminated successfully (0). Closing log file.
xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.21 (buildmeister@builder101) Thu Nov 4 21:47:28 PDT 2010
#Section "InputDevice"
# generated from default
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5"
#EndSection
Section "ServerLayout"
# InputDevice "Mouse0" "CorePointer"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "SynapticsTouchpad" "SendCoreEvents"
Option "Xinerama" "on"
EndSection
Section "Files"
FontPath "/usr/share/fonts/local"
EndSection
Section "Module"
Load "synaptics"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "AlwaysCore" "true"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "auto-dev"
Option "SHMConfig" "true"
Option "VertTwoFingerScroll" "true"
Option "HorizTwoFingerScroll" "true"
Option "TapButton1" "1"
Option "TapButton2" "3"
Option "TapButton3" "2"
Option "ClickFinger1" "1"
Option "ClickFinger2" "3"
Option "ClickFinger3" "2"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
xorg.conf.d/10-synaptics.conf:
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
I realize that there are a few lines commented out in xorg.conf referring to the synaptics protocol which would seem relevant to this issue. I have tried uncommenting each of them separately and together but still the problem continues.
I have searched the wiki and forums and came up empty handed. Any help would be most appreciated. Thanks for your time!
Last edited by ennui (2011-12-15 13:25:58)

Well found all the modules but now I get errors which seem to be because I have KMS disabled. I guess nouveau needs KMS but I seem to remember having it on prevented me from being able to boot up into linux on this macbook in the past.... Here is the error
[ 426.178]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 426.178] X Protocol Version 11, Revision 0
[ 426.178] Build Operating System: Linux 3.1.1-1-ARCH x86_64
[ 426.178] Current Operating System: Linux myhost 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011 x86_64
[ 426.178] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sda4 ro nomodeset
[ 426.178] Build Date: 16 November 2011 11:24:04AM
[ 426.178]
[ 426.178] Current version of pixman: 0.24.0
[ 426.178] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 426.178] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 426.178] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 14 08:21:45 2011
[ 426.178] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 426.179] (==) No Layout section. Using the first Screen section.
[ 426.179] (==) No screen section available. Using defaults.
[ 426.179] (**) |-->Screen "Default Screen Section" (0)
[ 426.179] (**) | |-->Monitor "<default monitor>"
[ 426.179] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 426.179] (==) Automatically adding devices
[ 426.179] (==) Automatically enabling devices
[ 426.179] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 426.179] Entry deleted from font path.
[ 426.179] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 426.179] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 426.179] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 426.179] (II) Loader magic: 0x7ccae0
[ 426.179] (II) Module ABI versions:
[ 426.179] X.Org ANSI C Emulation: 0.4
[ 426.179] X.Org Video Driver: 11.0
[ 426.179] X.Org XInput driver : 13.0
[ 426.179] X.Org Server Extension : 6.0
[ 426.180] (--) PCI:*(0:2:0:0) 10de:0647:106b:00bc rev 161, Mem @ 0xe4000000/16777216, 0xc0000000/268435456, 0xe2000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 426.180] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 426.180] (II) LoadModule: "extmod"
[ 426.180] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 426.180] (II) Module extmod: vendor="X.Org Foundation"
[ 426.180] compiled for 1.11.2, module version = 1.0.0
[ 426.180] Module class: X.Org Server Extension
[ 426.180] ABI class: X.Org Server Extension, version 6.0
[ 426.180] (II) Loading extension MIT-SCREEN-SAVER
[ 426.180] (II) Loading extension XFree86-VidModeExtension
[ 426.180] (II) Loading extension XFree86-DGA
[ 426.180] (II) Loading extension DPMS
[ 426.180] (II) Loading extension XVideo
[ 426.180] (II) Loading extension XVideo-MotionCompensation
[ 426.180] (II) Loading extension X-Resource
[ 426.180] (II) LoadModule: "dbe"
[ 426.181] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 426.181] (II) Module dbe: vendor="X.Org Foundation"
[ 426.181] compiled for 1.11.2, module version = 1.0.0
[ 426.181] Module class: X.Org Server Extension
[ 426.181] ABI class: X.Org Server Extension, version 6.0
[ 426.181] (II) Loading extension DOUBLE-BUFFER
[ 426.181] (II) LoadModule: "glx"
[ 426.181] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 426.193] (II) Module glx: vendor="NVIDIA Corporation"
[ 426.193] compiled for 4.0.2, module version = 1.0.0
[ 426.193] Module class: X.Org Server Extension
[ 426.193] (II) NVIDIA GLX Module 290.10 Wed Nov 16 18:01:24 PST 2011
[ 426.193] (II) Loading extension GLX
[ 426.193] (II) LoadModule: "record"
[ 426.193] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 426.193] (II) Module record: vendor="X.Org Foundation"
[ 426.193] compiled for 1.11.2, module version = 1.13.0
[ 426.194] Module class: X.Org Server Extension
[ 426.194] ABI class: X.Org Server Extension, version 6.0
[ 426.194] (II) Loading extension RECORD
[ 426.194] (II) LoadModule: "dri"
[ 426.194] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 426.194] (II) Module dri: vendor="X.Org Foundation"
[ 426.194] compiled for 1.11.2, module version = 1.0.0
[ 426.194] ABI class: X.Org Server Extension, version 6.0
[ 426.194] (II) Loading extension XFree86-DRI
[ 426.194] (II) LoadModule: "dri2"
[ 426.194] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 426.194] (II) Module dri2: vendor="X.Org Foundation"
[ 426.194] compiled for 1.11.2, module version = 1.2.0
[ 426.194] ABI class: X.Org Server Extension, version 6.0
[ 426.194] (II) Loading extension DRI2
[ 426.194] (==) Matched nouveau as autoconfigured driver 0
[ 426.194] (==) Matched nv as autoconfigured driver 1
[ 426.194] (==) Matched nvidia as autoconfigured driver 2
[ 426.194] (==) Matched vesa as autoconfigured driver 3
[ 426.194] (==) Matched fbdev as autoconfigured driver 4
[ 426.194] (==) Assigned the driver to the xf86ConfigLayout
[ 426.194] (II) LoadModule: "nouveau"
[ 426.194] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 426.194] (II) Module nouveau: vendor="X.Org Foundation"
[ 426.194] compiled for 1.11.0, module version = 0.0.16
[ 426.194] Module class: X.Org Video Driver
[ 426.194] ABI class: X.Org Video Driver, version 11.0
[ 426.194] (II) LoadModule: "nv"
[ 426.194] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 426.194] (II) Module nv: vendor="X.Org Foundation"
[ 426.194] compiled for 1.11.0, module version = 2.1.18
[ 426.194] Module class: X.Org Video Driver
[ 426.194] ABI class: X.Org Video Driver, version 11.0
[ 426.194] (II) LoadModule: "nvidia"
[ 426.194] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 426.195] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 426.195] compiled for 4.0.2, module version = 1.0.0
[ 426.195] Module class: X.Org Video Driver
[ 426.195] (II) LoadModule: "vesa"
[ 426.195] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 426.195] (II) Module vesa: vendor="X.Org Foundation"
[ 426.195] compiled for 1.11.1, module version = 2.3.0
[ 426.195] Module class: X.Org Video Driver
[ 426.195] ABI class: X.Org Video Driver, version 11.0
[ 426.195] (II) LoadModule: "fbdev"
[ 426.195] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 426.195] (II) Module fbdev: vendor="X.Org Foundation"
[ 426.195] compiled for 1.10.99.902, module version = 0.4.2
[ 426.195] ABI class: X.Org Video Driver, version 11.0
[ 426.195] (II) NOUVEAU driver
[ 426.195] (II) NOUVEAU driver for NVIDIA chipset families :
[ 426.195] RIVA TNT (NV04)
[ 426.195] RIVA TNT2 (NV05)
[ 426.195] GeForce 256 (NV10)
[ 426.195] GeForce 2 (NV11, NV15)
[ 426.196] GeForce 4MX (NV17, NV18)
[ 426.196] GeForce 3 (NV20)
[ 426.196] GeForce 4Ti (NV25, NV28)
[ 426.196] GeForce FX (NV3x)
[ 426.196] GeForce 6 (NV4x)
[ 426.196] GeForce 7 (G7x)
[ 426.196] GeForce 8 (G8x)
[ 426.196] GeForce GTX 200 (NVA0)
[ 426.196] GeForce GTX 400 (NVC0)
[ 426.196] (II) NOUVEAU driver
[ 426.196] (II) NOUVEAU driver for NVIDIA chipset families :
[ 426.196] RIVA TNT (NV04)
[ 426.196] RIVA TNT2 (NV05)
[ 426.196] GeForce 256 (NV10)
[ 426.196] GeForce 2 (NV11, NV15)
[ 426.196] GeForce 4MX (NV17, NV18)
[ 426.196] GeForce 3 (NV20)
[ 426.196] GeForce 4Ti (NV25, NV28)
[ 426.196] GeForce FX (NV3x)
[ 426.196] GeForce 6 (NV4x)
[ 426.196] GeForce 7 (G7x)
[ 426.196] GeForce 8 (G8x)
[ 426.196] GeForce GTX 200 (NVA0)
[ 426.196] GeForce GTX 400 (NVC0)
[ 426.196] (II) NVIDIA dlloader X Driver 290.10 Wed Nov 16 17:41:10 PST 2011
[ 426.196] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 426.196] (II) VESA: driver for VESA chipsets: vesa
[ 426.196] (II) FBDEV: driver for framebuffer: fbdev
[ 426.196] (--) using VT number 7
[ 426.199] drmOpenDevice: node name is /dev/dri/card0
[ 426.205] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 426.205] drmOpenDevice: node name is /dev/dri/card0
[ 426.210] drmOpenByBusid: drmOpenMinor returns -1
[ 426.210] drmOpenDevice: node name is /dev/dri/card1
[ 426.215] drmOpenByBusid: drmOpenMinor returns -1
[ 426.215] drmOpenDevice: node name is /dev/dri/card2
[ 426.220] drmOpenByBusid: drmOpenMinor returns -1
[ 426.220] drmOpenDevice: node name is /dev/dri/card3
[ 426.225] drmOpenByBusid: drmOpenMinor returns -1
[ 426.225] drmOpenDevice: node name is /dev/dri/card4
[ 426.230] drmOpenByBusid: drmOpenMinor returns -1
[ 426.230] drmOpenDevice: node name is /dev/dri/card5
[ 426.235] drmOpenByBusid: drmOpenMinor returns -1
[ 426.235] drmOpenDevice: node name is /dev/dri/card6
[ 426.240] drmOpenByBusid: drmOpenMinor returns -1
[ 426.240] drmOpenDevice: node name is /dev/dri/card7
[ 426.245] drmOpenByBusid: drmOpenMinor returns -1
[ 426.245] drmOpenDevice: node name is /dev/dri/card8
[ 426.250] drmOpenByBusid: drmOpenMinor returns -1
[ 426.250] drmOpenDevice: node name is /dev/dri/card9
[ 426.255] drmOpenByBusid: drmOpenMinor returns -1
[ 426.255] drmOpenDevice: node name is /dev/dri/card10
[ 426.260] drmOpenByBusid: drmOpenMinor returns -1
[ 426.260] drmOpenDevice: node name is /dev/dri/card11
[ 426.265] drmOpenByBusid: drmOpenMinor returns -1
[ 426.265] drmOpenDevice: node name is /dev/dri/card12
[ 426.270] drmOpenByBusid: drmOpenMinor returns -1
[ 426.270] drmOpenDevice: node name is /dev/dri/card13
[ 426.275] drmOpenByBusid: drmOpenMinor returns -1
[ 426.275] drmOpenDevice: node name is /dev/dri/card14
[ 426.280] drmOpenByBusid: drmOpenMinor returns -1
[ 426.280] drmOpenDevice: node name is /dev/dri/card15
[ 426.285] drmOpenByBusid: drmOpenMinor returns -1
[ 426.285] drmOpenDevice: node name is /dev/dri/card0
[ 426.291] drmOpenDevice: node name is /dev/dri/card0
[ 426.296] drmOpenDevice: node name is /dev/dri/card1
[ 426.301] drmOpenDevice: node name is /dev/dri/card2
[ 426.305] drmOpenDevice: node name is /dev/dri/card3
[ 426.309] drmOpenDevice: node name is /dev/dri/card4
[ 426.313] drmOpenDevice: node name is /dev/dri/card5
[ 426.318] drmOpenDevice: node name is /dev/dri/card6
[ 426.323] drmOpenDevice: node name is /dev/dri/card7
[ 426.328] drmOpenDevice: node name is /dev/dri/card8
[ 426.333] drmOpenDevice: node name is /dev/dri/card9
[ 426.338] drmOpenDevice: node name is /dev/dri/card10
[ 426.343] drmOpenDevice: node name is /dev/dri/card11
[ 426.348] drmOpenDevice: node name is /dev/dri/card12
[ 426.352] drmOpenDevice: node name is /dev/dri/card13
[ 426.357] drmOpenDevice: node name is /dev/dri/card14
[ 426.362] drmOpenDevice: node name is /dev/dri/card15
[ 426.367] (EE) [drm] failed to open device
[ 426.367] (II) Loading sub module "fb"
[ 426.367] (II) LoadModule: "fb"
[ 426.368] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 426.368] (II) Module fb: vendor="X.Org Foundation"
[ 426.368] compiled for 1.11.2, module version = 1.0.0
[ 426.368] ABI class: X.Org ANSI C Emulation, version 0.4
[ 426.368] (II) Loading sub module "wfb"
[ 426.368] (II) LoadModule: "wfb"
[ 426.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 426.368] (II) Module wfb: vendor="X.Org Foundation"
[ 426.368] compiled for 1.11.2, module version = 1.0.0
[ 426.368] ABI class: X.Org ANSI C Emulation, version 0.4
[ 426.368] (II) Loading sub module "ramdac"
[ 426.368] (II) LoadModule: "ramdac"
[ 426.368] (II) Module "ramdac" already built-in
[ 426.368] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 426.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 426.368] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 426.368] (WW) Falling back to old probe method for vesa
[ 426.368] (WW) Falling back to old probe method for fbdev
[ 426.368] (II) Loading sub module "fbdevhw"
[ 426.368] (II) LoadModule: "fbdevhw"
[ 426.368] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 426.368] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 426.368] compiled for 1.11.2, module version = 0.0.2
[ 426.368] ABI class: X.Org Video Driver, version 11.0
[ 426.368] (EE) open /dev/fb0: No such file or directory
[ 426.369] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 426.369] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 426.369] (==) NVIDIA(0): RGB weight 888
[ 426.369] (==) NVIDIA(0): Default visual is TrueColor
[ 426.369] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 426.369] (**) NVIDIA(0): Enabling 2D acceleration
[ 427.694] (II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
[ 427.694] (II) NVIDIA(GPU-0): Vision stereo.
[ 427.696] (II) NVIDIA(0): NVIDIA GPU GeForce 9600M GT (G96) at PCI:2:0:0 (GPU-0)
[ 427.696] (--) NVIDIA(0): Memory: 262144 kBytes
[ 427.696] (--) NVIDIA(0): VideoBIOS: 62.94.58.00.17
[ 427.696] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 427.696] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 427.696] (--) NVIDIA(0): Connected display device(s) on GeForce 9600M GT at PCI:2:0:0
[ 427.696] (--) NVIDIA(0): Apple Color LCD (DFP-0)
[ 427.696] (--) NVIDIA(0): Apple Color LCD (DFP-0): 330.0 MHz maximum pixel clock
[ 427.696] (--) NVIDIA(0): Apple Color LCD (DFP-0): Internal Dual Link LVDS
[ 427.698] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[ 427.698] (**) NVIDIA(0): enabled on all display devices.
[ 427.736] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 427.736] (==) NVIDIA(0):
[ 427.736] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 427.736] (==) NVIDIA(0): will be used as the requested mode.
[ 427.736] (==) NVIDIA(0):
[ 427.736] (II) NVIDIA(0): Validated modes:
[ 427.736] (II) NVIDIA(0): "nvidia-auto-select"
[ 427.736] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 428.784] (--) NVIDIA(0): DPI set to (110, 108); computed from "UseEdidDpi" X config
[ 428.784] (--) NVIDIA(0): option
[ 428.784] (II) UnloadModule: "nv"
[ 428.784] (II) Unloading nv
[ 428.784] (II) UnloadModule: "vesa"
[ 428.784] (II) Unloading vesa
[ 428.784] (II) UnloadModule: "fbdev"
[ 428.784] (II) Unloading fbdev
[ 428.784] (II) UnloadModule: "fbdevhw"
[ 428.784] (II) Unloading fbdevhw
[ 428.784] (--) Depth 24 pixmap format is 32 bpp
[ 428.784] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 428.790] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 428.790] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 428.790] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 428.790] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 428.791] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 428.791] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 428.791] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 428.791] (II) NVIDIA(0): Config Options in the README.
[ 428.793] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 429.088] (II) Loading extension NV-GLX
[ 429.126] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 429.126] (==) NVIDIA(0): Backing store disabled
[ 429.126] (==) NVIDIA(0): Silken mouse enabled
[ 429.127] (==) NVIDIA(0): DPMS enabled
[ 429.127] (II) Loading extension NV-CONTROL
[ 429.128] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "CRT", but no
[ 429.128] (WW) NVIDIA(0): such display device could be found, or all display devices
[ 429.128] (WW) NVIDIA(0): by that name are currently unavailable.
[ 429.128] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "TV", but no such
[ 429.128] (WW) NVIDIA(0): display device could be found, or all display devices by
[ 429.128] (WW) NVIDIA(0): that name are currently unavailable.
[ 429.128] (II) Loading extension XINERAMA
[ 429.128] (II) Loading sub module "dri2"
[ 429.128] (II) LoadModule: "dri2"
[ 429.128] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 429.128] (II) Module dri2: vendor="X.Org Foundation"
[ 429.128] compiled for 1.11.2, module version = 1.2.0
[ 429.128] ABI class: X.Org Server Extension, version 6.0
[ 429.128] (II) NVIDIA(0): [DRI2] Setup complete
[ 429.128] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 429.128] (==) RandR enabled
[ 429.128] (II) Initializing built-in extension Generic Event Extension
[ 429.128] (II) Initializing built-in extension SHAPE
[ 429.128] (II) Initializing built-in extension MIT-SHM
[ 429.128] (II) Initializing built-in extension XInputExtension
[ 429.128] (II) Initializing built-in extension XTEST
[ 429.128] (II) Initializing built-in extension BIG-REQUESTS
[ 429.128] (II) Initializing built-in extension SYNC
[ 429.128] (II) Initializing built-in extension XKEYBOARD
[ 429.128] (II) Initializing built-in extension XC-MISC
[ 429.128] (II) Initializing built-in extension SECURITY
[ 429.128] (II) Initializing built-in extension XINERAMA
[ 429.128] (II) Initializing built-in extension XFIXES
[ 429.128] (II) Initializing built-in extension RENDER
[ 429.128] (II) Initializing built-in extension RANDR
[ 429.128] (II) Initializing built-in extension COMPOSITE
[ 429.128] (II) Initializing built-in extension DAMAGE
[ 429.129] (II) Initializing extension GLX
[ 429.223] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 429.223] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 429.223] (II) LoadModule: "evdev"
[ 429.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 429.223] (II) Module evdev: vendor="X.Org Foundation"
[ 429.223] compiled for 1.10.99.902, module version = 2.6.0
[ 429.223] Module class: X.Org XInput Driver
[ 429.223] ABI class: X.Org XInput driver, version 13.0
[ 429.223] (II) Using input driver 'evdev' for 'Power Button'
[ 429.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 429.223] (**) Power Button: always reports core events
[ 429.223] (**) Power Button: Device: "/dev/input/event3"
[ 429.223] (--) Power Button: Found keys
[ 429.223] (II) Power Button: Configuring as keyboard
[ 429.223] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 429.223] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 429.223] (**) Option "xkb_rules" "evdev"
[ 429.223] (**) Option "xkb_model" "evdev"
[ 429.223] (**) Option "xkb_layout" "us"
[ 429.245] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 429.245] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 429.245] (II) Using input driver 'evdev' for 'Power Button'
[ 429.245] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 429.245] (**) Power Button: always reports core events
[ 429.245] (**) Power Button: Device: "/dev/input/event1"
[ 429.245] (--) Power Button: Found keys
[ 429.245] (II) Power Button: Configuring as keyboard
[ 429.245] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 429.245] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 429.245] (**) Option "xkb_rules" "evdev"
[ 429.245] (**) Option "xkb_model" "evdev"
[ 429.245] (**) Option "xkb_layout" "us"
[ 429.245] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 429.245] (II) No input driver/identifier specified (ignoring)
[ 429.245] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 429.245] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 429.245] (II) Using input driver 'evdev' for 'Sleep Button'
[ 429.245] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 429.245] (**) Sleep Button: always reports core events
[ 429.245] (**) Sleep Button: Device: "/dev/input/event2"
[ 429.245] (--) Sleep Button: Found keys
[ 429.245] (II) Sleep Button: Configuring as keyboard
[ 429.245] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 429.245] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 429.245] (**) Option "xkb_rules" "evdev"
[ 429.245] (**) Option "xkb_model" "evdev"
[ 429.245] (**) Option "xkb_layout" "us"
[ 429.246] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event8)
[ 429.246] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 429.246] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 429.246] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 429.246] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 429.246] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event8"
[ 429.246] (--) Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[ 429.246] (II) Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[ 429.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input8/event8"
[ 429.246] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 9)
[ 429.246] (**) Option "xkb_rules" "evdev"
[ 429.246] (**) Option "xkb_model" "evdev"
[ 429.246] (**) Option "xkb_layout" "us"
[ 429.246] (II) config/udev: Adding input device bcm5974 (/dev/input/event7)
[ 429.246] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 429.246] (**) bcm5974: Applying InputClass "touchpad catchall"
[ 429.246] (II) LoadModule: "synaptics"
[ 429.247] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 429.247] (II) Module synaptics: vendor="X.Org Foundation"
[ 429.247] compiled for 1.11.0, module version = 1.5.0
[ 429.247] Module class: X.Org XInput Driver
[ 429.247] ABI class: X.Org XInput driver, version 13.0
[ 429.247] (II) Using input driver 'synaptics' for 'bcm5974'
[ 429.247] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 429.247] (**) bcm5974: always reports core events
[ 429.247] (**) Option "Device" "/dev/input/event7"
[ 429.360] (--) synaptics: bcm5974: x-axis range 0 - 1280
[ 429.360] (--) synaptics: bcm5974: y-axis range 0 - 800
[ 429.360] (--) synaptics: bcm5974: pressure range 0 - 256
[ 429.360] (--) synaptics: bcm5974: finger width range 0 - 0
[ 429.360] (--) synaptics: bcm5974: buttons: left double triple
[ 429.360] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x236
[ 429.360] (**) Option "TapButton1" "1"
[ 429.360] (**) Option "TapButton2" "2"
[ 429.360] (**) Option "TapButton3" "3"
[ 429.443] (--) synaptics: bcm5974: touchpad found
[ 429.443] (**) bcm5974: always reports core events
[ 429.530] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.2/input/input7/event7"
[ 429.530] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 10)
[ 429.530] (**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
[ 429.530] (**) synaptics: bcm5974: MaxSpeed is now 1.75
[ 429.530] (**) synaptics: bcm5974: AccelFactor is now 0.133
[ 429.530] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 429.530] (**) bcm5974: (accel) acceleration profile 1
[ 429.530] (**) bcm5974: (accel) acceleration factor: 2.000
[ 429.530] (**) bcm5974: (accel) acceleration threshold: 4
[ 429.534] (--) synaptics: bcm5974: touchpad found
[ 429.535] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
[ 429.535] (II) No input driver/identifier specified (ignoring)
[ 429.535] (II) config/udev: Adding input device Built-in iSight (/dev/input/event6)
[ 429.535] (**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
[ 429.535] (II) Using input driver 'evdev' for 'Built-in iSight'
[ 429.535] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 429.535] (**) Built-in iSight: always reports core events
[ 429.535] (**) Built-in iSight: Device: "/dev/input/event6"
[ 429.535] (--) Built-in iSight: Found keys
[ 429.535] (II) Built-in iSight: Configuring as keyboard
[ 429.535] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input6/event6"
[ 429.535] (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 11)
[ 429.535] (**) Option "xkb_rules" "evdev"
[ 429.535] (**) Option "xkb_model" "evdev"
[ 429.535] (**) Option "xkb_layout" "us"
[ 429.535] (II) config/udev: Adding input device applesmc (/dev/input/event5)
[ 429.535] (II) No input driver/identifier specified (ignoring)
[ 429.536] (II) config/udev: Adding input device applesmc (/dev/input/js0)
[ 429.536] (II) No input driver/identifier specified (ignoring)
[ 429.536] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 429.536] (II) No input driver/identifier specified (ignoring)
[ 429.566] (II) Power Button: Close
[ 429.566] (II) UnloadModule: "evdev"
[ 429.566] (II) Unloading evdev
[ 429.630] (II) Power Button: Close
[ 429.630] (II) UnloadModule: "evdev"
[ 429.630] (II) Unloading evdev
[ 429.736] (II) Sleep Button: Close
[ 429.736] (II) UnloadModule: "evdev"
[ 429.736] (II) Unloading evdev
[ 429.790] (II) Apple Inc. Apple Internal Keyboard / Trackpad: Close
[ 429.790] (II) UnloadModule: "evdev"
[ 429.790] (II) Unloading evdev
[ 429.986] (II) UnloadModule: "synaptics"
[ 429.986] (II) Unloading synaptics
[ 430.093] (II) Built-in iSight: Close
[ 430.093] (II) UnloadModule: "evdev"
[ 430.093] (II) Unloading evdev
[ 431.814] Server terminated successfully (0). Closing log file.
Now if I'm not mistaken I can use nvidia drivers rather than nouvea correct? It must me something in one of my /xorg.conf.d configs that is asking xorg to use nouvea yes? I suppose it back to digging

SCCM console launch fails , SQL connectivity issue with SCCM machine account

Hi ,
As part of resolving the corrupt SCCM 2012 R2 environment, we have uninstalled the site from the Standalone primary site and restored it from the last backup. The database is on remote server on SQL 2012 SP1. Only Site recovery is run.
Post the restoration on unable to launch the SCCM console, Error Could not connect to the site.
When I checked the logs in the log file SmsProv.log in the program filles\Microsoft Configuration manager\logs, the error is as below
*~*~e:\nts_sccm_release\sms\siteserver\sdk_provider\smsprov\sspobjectquery.cpp(6260) : SQL Connection attempt timed out~ SQL Error: [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
*~*~SQL Connection attempt timed out [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
<*><*> CANT CONNECT TO SQL, RETURNING ERROR <*><*>
Regards
Leela

Hi Grath,
We ran a Site recovery, I checked the permissions on SQL server. Could not find the SCCM machine account in the SQL logins. Adding the SCCM machine account to the SQL logins solved the issue. As part of the recovery we only recovered the Site using the Site
backup. Have not touched the SQL server which is on a remote machine??
Anyways the login issue is resolved now.
Regards
Leela

Launch failed Flash Builder 4.7

I install Flash Builder 4.7 beta and I have some trouble. I'll try launch debugger, but he's stop on 57% and later shows me this message:
The Flash Builder debugger failed to connect to the running application.
Ensure that:
1. For in-browser applications, you are running the debugger version of Flash Player.
2. For network debugging on a mobile device, you have a reliable network connection to the device, and port 7935 is open on your machine's firewall.
I follow instuctions, and install flash player Flash Player 11.4 content debugger and put into /Applications/Adobe Flash Builder 4.7/player/mac/11.4. Also downloaded playerglobal.swc and replaced /Applications/Adobe Flash Builder 4.7/sdks/4.6.0/frameworks/libs/player/11.1. In Preferences/FlashBuilder/Debug/Standalone Adobe Flash Player I choose path /Applications/Adobe Flash Builder 4.7/player/mac/11.4/Flash Player Debugger.app
Also I write into -swf-version=17 and choose Use a specific version 11.4.0 but it did't help me
Configuration:
OS: OSX 10.8.2
FlashBuilder: 4.7 beta
FlashPlayer: 11.4.402.265
This problem was also in FlashBuilder 4.6.
How to fix it?

Yes, but I forgot how I did it. Here said that you must right click on flash content and choose debugger, but in OSX debugger can't enabled.

Hamachi not launching, failed to connect to engine, error 1053, tried EVERYTHING

Please read before suggesting doing things I've already tried. So here's what's happening with my Hamachi, When I try to get it booted up, I get an error that says, "failed to connect to engine".So I went into services, made sure the "Allow services to interact with Desktop" option under the Logon tab in the Properties was unchecked.After that I tried to start the tunneling engine manually from there.I recieved an error 1053 message, "the service did respond to the start or control request in a timely fashion" After reading this I checked the registry, under HKEY_LOCAL_MACHINE/SOFTWARE/Wow6432Node/LogMeIn Hamachi and made sure the EngineConfigDir folder was there, and had to add it in as it was missing. After having done all of this I tried to start Hamachi once again, and kept getting the same errors all over again. What do I do??? I'm seriously desperate to get this up and running, but I cannot for the life of me figure out what is wrong.

The run solution was the only one that worked for me! :) If it does this again I might just try to un-install and install again. Catasstrophy wrote:
you can fix this problem easily:1.hold the windows button and press the "r" key or go to start menu and type "run" and launch "Run"2.type in the run window "services.msc" and press enter3.scroll to "LogMeIn Hamatchi Tunneling Engine" and click it4.press "start the service"5.launch LogMeIn

Flash builder 4.5 launch failed

I have a project I built using most of the code from the employee directory tutorial and when i made the changes to run it using DAO and the sqllite database it does not launch and sends me a lauch failed error
Process terminated unexpectedly
initial content not found
Any help to get this so I can atleast run it and debug it would be great

On a related note that might be the cause of some people's problem:
I just had a similar problem (how/why I found this post) and I was getting a similar error. The problem started when I deleted the .swf from the bin-release folder. I kept getting:
Process terminated unexpectedly.
initial content not found
Launch command details: "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\bin\adl.exe" -runtime "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\runtimes\air\win" C:\wamp\www\Imaginus.org\projects\xxx\xxx\xxx-app.xml C:\wamp\www\Imaginus.org\projects\xxx\xxx
(xxx is/was the name of my project)
I fixed the problem when I was looking at the properties and under "Properties>Builders" there is a checkbox for "Missing Builder (com.powerflasher.fdt.core.FlashBuilder)" that I'm guessing was added when I installed FDT PowerFlasher to play with a few days ago. I unchecked the box and approved the "This is an advanced operation..." warning. The compiler reconfigured itself and I tried to launch again. This time FB DID rebuild the .swf and launched as expected.
Thought I'd add this comment just in case other people find this thread and just happen to have the same problem.
=)
Todd

NMAS Launch Failed

Similar Messages

Maybe you are looking for