NME-IPS K9 running in 3845 not accessible
I am not able to ping or ssh into my IPS module. I am not able to access it via the router either. When I try to create a session via the router I get the following : Trying xx.xxx.xxx.xxxx, 2114 Open..... and it just sits there. Is there another way to access it and/or reboot the module, without restarting the router.
Hello,
1. You can reset the NME-IPS module from the Router CLI.
This will only reset the NME-IPS not the Router.
router# service-module ids-sensor 1/0 reset
Use reset only to recover from shutdown or failed state
Warning: May lose data on the hard disc!
Do you want to reset?[confirm]
http://tools.cisco.com/squish/b63A4
2. After it comes back up, check if the module is responsive.
You can also issue: 'show inventory' and check if the module is even detected by the router.
If the module is not even detected by the router, it may be an hardware issue.
3. Check if the module is correctly configured.
Check my configuration document for this.
https://supportforums.cisco.com/docs/DOC-12364
Sid Chandrachud
TAC Security Solutions
Similar Messages
-
Why site database server for Central Admin site not accessible?
Hello everyone,
I've this issue where; when connecting a primary site to existing central administration site; setup prerequisite checker
continue to notify it cannot establish connection to SQL server having central administration site database. The SQL server
having central site database is installed locally on the server central administration site is hosted on. Both servers
(central administration site server, the new server to host child primary site required to join that central administration
site) having following configuration:
A. Central Administration site server, with site database server installed locally:
Name: HQCAS
OS: WS 2008 R2 SP1, fully patched.
SQL Server: SQL Server 2008 R2 with SP2. Correct required SQL server collation set supported by CM2012.
SQL Server named instance: CASDB
Local firewall ports opened: 1433, 4022 (via inbound rules created in group policy, same GPO applies to primary site
server)
SQL Server broker service Enabled: True.
TCP/IP: All dynamic ports left blank to support static port 1433.Static port 1433 configured for all IPs.
IP Address: 10.1.1.250/8
Local SAM: Both server computer accounts added to local 'Administrators' group on both servers.
Domain service account: svcCASDB
SPNs registered: 2x, one for HQCAS hostname on instance CASDB on port 1433, second for FQDN for HQCAS on instance
CASDB on port 1433.
SQL Server Logins: Security group containing both computer accounts for HQCAS & STPRS. Both account having sysadmin SQL
server role assigned.
SQL Server browser service running.
B. Primary site server, with SQL server installed locally: to join HQCAS CM2012 hierarchy:
Name: STPRS
OS: WS 2008 R2 SP1, fully patched.
SQL Server: SQL Server 2008 R2 with SP2. Correct required SQL server collation set supported by CM2012.
SQL Server named instance: CM12PRIMARY
Local firewall ports opened: 1433, 4022 (via inbound rules created in group policy, same GPO applies to central
administration site server)
SQL Server broker service Enabled: True.
TCP/IP: All dynamic ports left blank to support static port 1433.Static port 1433 configured for all IPs.
IP Address: 172.168.1.250/16
Local SAM: Both server computer accounts added to local 'Administrators' group on both servers.
Domain service account: svcCASDB
SPNs registered: 2x, one for STPRS hostname on instance CM12PRIMARY on port 1433, second for FQDN for STPRS on
instance CM12PRIMARY on port 1433.
SQL Server Logins: Security group containing both computer accounts for HQCAS & STPRS. Both account having sysadmin SQL
server role assigned.
SQL Server browser service running.
Tests performed:
Telnet to/from both HQCAS/STPRS on ports 1433, 4022 establishes connection. Please help
Hello friends,
My finding it finally is....there wasn't any configuration issue as I mentioned above.
I'm using an evaluation edition of SQL Server 2008 R2; it just allows default instance (MSSQLSERVER) to be used, not a named instance.
The confirming test for this was...I re-installed SQL Server with all the same settings except changing from a named instance to default; once I finished applying service pack 3. I could initiate WSUS 3.0 SP2 x64 setup and point it to use this SQL server.
WSUS setup completed without any errors. This was not happening when named instance was all configured properly. It was just not accessible from outside.
Well this is what my finding is. For lab environment of CM2012 it suffices the need.
Regards,
Shahzad. -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
The Secure Store Service application Secure Store Service Proxy is not accessible
I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{<br />
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help. -
The selected remote nodes 'node3' are not accessible
Hello,
I removed node3 from 2 node RAC Cluster.
After this I have re-add this node to my RAC. I added without any problem to CRS but I have a problem with script addNode.sh (/u01/app/oracle/product/crs/oui/bin).
I have to separate homes for ORACLE_HOME and ASM_HOME, so I need to run this script twice for each ORACLE_HOME.
I run addNode.sh from one of the cluster nodes (node1), if I run:
export ORACLE_HOME=/u01/app/oracle/product/11.1.0/asm
cd $ORACLE_HOME/oui/bin
./addNode.sh -silent CLUSTER_NEW_NODES={node3} CLUSTER_NEW_PRIVATE_NODE_NAMES={node3-priv} CLUSTER_NEW_VIRTUAL_HOSTNAMES={node3-vip}
I got the following error:
Performing tests to see whether nodes node2,node3 are available
............................................................SEVERE:The selected remote nodes 'node3' are not accessible.
... 100% Done.
I reviewed logs located in /u01/app/oraInventory/logs I found
Status of node 'node3':
null
The virtual host name 'node3-vip' for node 'node3' is already in use.
I checked crs_stat from $ORA_CRS_HOME, but all applications (ons, gsd, vip) and targets are ONLINE. I tried to run vipca -nodelist node1,node2,node3 and updated a configuration. I checked /etc/hosts, connection via SSH between all hosts belonging to RAC: node1, node1-vip, node1-priv etc. Everything looks like fine, so I have no idea what caused this problem.
Software which I used:
Linux: UNL 5.4 x86_64
11g Release 11.1.0.7.0 - 64bit, Oracle Clusterware
Thank you for your answer,
Best Regards,
Edited by: user4924714 on 2010-02-15 07:50Hi,
Thanks for your reply.
I am running addNode.sh from node which already exist in the Rac Cluster. I tried on node1, node2 but the resulat are the same.
Best regards, -
The server was not found or was not accessible.
I've upgraded to a Windows 8.1 machine, and installed SQL Server 2012 (version 11.0.3128.0), and SQL Server Express 2008 R2 (v 10.0.5500.0).
I've created a database in the 11.0.3128.0 instance, and populated it by restoring it from a .BAK from another server.
I've opened Visual Studio 2012, and accessed the database via the Server Explorer, with no problem.
I've copied a running web app to this same machine, and opened it in Visual Studio 2012. But when I attempt to run in debug mode, my first attempt to access the database gives me this error:
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
Here's my connection string, as defined in the <connectionStrings> section of my App.Config:
<add name="EMSDataModelContainer"
connectionString="metadata=res://*/EMSDataModel.csdl|res://*/EMSDataModel.ssdl|res://*/EMSDataModel.msl;provider=System.Data.SqlClient;provider connection string="Data Source=xps-8500;Initial Catalog=EMS;Integrated Security=True;multipleactiveresultsets=True;App=EntityFramework""
providerName="System.Data.EntityClient" />
Thanks in advance.Hello,
Please read the following resources:
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/20d8edf8-f36d-48ac-8623-c06e485448a3/i-have-a-problem-with-a-connection-to-database-sqlserver-2012?forum=sqlexpress
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hi All,
I have started receiving this error in the logs for the last 10 days and the Schedules Jobs for the database have stopped running. My MS CRM application is working fine.
Can anyone guide me what could be the problem.
Date 17/4/2014 2:04:20 PM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
Date 17/4/2014 2:11:55 PM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]
Date 7/4/2014 11:00:31 AM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]Check this link
http://social.msdn.microsoft.com/Forums/en-US/906da9b5-2482-468c-a424-ae099da2d96b/sql-server-agent-service-account-error?forum=sqlsetupandupgrade
Regards, RSingh -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
HD Not Accessible to Repair Permissions
Hello. I hope you can help me isolate the error that is keeping my Intel iMac G5 from booting properly. I’m running 10.4.
It froze after I’d been backing up onto DVD/dumping old data (about 20GB worth). Whenever I tried restarting the screen would freeze on the grey apple logo, sometimes with the swirly icon.
When I ran Disk Utility off the install disk at first it indicated “error detected” on mass storage, but later said it was fine. But I could not run Repair successfully (I kept getting "repair failed" messages), and the Repair Disk Permissions button was not accessible (greyed out).
I could not startup in safe mode. And if I tried to restart in DU the only option was a Network (which I'm not hooked up to).
Once I got a Kernal panic screen but most of the time it was just a grey apple with the fan hitting 900 rpm.
Finally I ran DiskWarrior and in 15 minutes it had cleaned out and rebuilt my HD. I thought I was home clear.
However, even though Disk Utility now says my HD is fine, it still does not allow me to Repair Disk Permissions - the option is greyed out. And if I boot up pressing Option to select a Startup Disk, the rebuilt drive is not one of them.
It appears my /Library/Receipts folder is empty.
What’s more, if I try to run an admin command in Terminal, like
sudo diskutil repairPermissions /
I get the message:
-bash: sudo: command not found
In fact, any way I try typing sudo I get a “command not found” message, even if I try to run other command like chmod.
When I type:
Users
I get
Users: command not found.
So I typed:
Echo $PATH
And get
/bin:/sbin:/usr/bn:/usr/sbin:/usr/libexec:/System/Library/CoreServices
I’m not sure at this point whether the fact that the DiskWarrior-rebuilt drive doesn’t show up among Startup options (when I boot with option key) is because of missing/broken permissions; an empty /Library/Receipts folder; missing users; or a missing path.
Any and all help is appreciated. Thank you.Oy. I purchased an external drive and began installing Mac OSX onto it, so that I could then migrate all files from the unbootable hard drive before running an Archive & Install. That part seemed to go smoothly. But a few problems have emerged:
1. Though I was prompted to keep Disk 2 of the install ready, it never asked me for it, even though I ran the installation 2 or 3 times. Consequently while I can select the external drive when booting up command-S, I can only see Install window, Disk Utility or Terminal windows - never a desktop, preferences drop down, help menu, finder, all the things I'd typically see when launching my machine. Is this normal? Is there a way to force it to install only disk 2 if it has things it needs for full bootable GUI / access?
2. Booting up with the install disk, in disk utility I can see both drives but still cannot repair permissions on my affected HD. I tried via Terminal (repairPermissions, chmod or chown) commands; I keep getting error messages (command not found).
3. Switching cd / to my new drive in Terminal, I was able, I think, to change permissions (755) but when I open Disk Utility the drive is still not writable and "Repair Disk Permissions" is still grayed out.
4. I could not open Migration Assistant on the new drive via Disk Utility, so I copied it from the HD into its own folder on the new one, but am really confused about the whole Disk Image thing. If I create a new disk image and try to open it, convert or checksum it, it still is grayed out, I can never just open it. I tried running commands in Terminal to run that application on the external drive, pointing to the new folder, to the .app, to the contents, .dmg, and no commands seem to work, I keep getting the command not found message.
If I just run the A&I, I fear I'll lose my data which is why I wanted to migrate everything over before I did so. But if the user / owner permissions are screwed up and the only way to fix them is A&I, I don't know what else to do.
Is there ANY way to boot from the install, run Migration Assistant from the external drive (either through Disk Utility or Terminal) and copy all files from HD? If not, I guess I'll have to cross fingers and A&I.
Gee, I used to love my Mac ... -
Can;t write to CD/DVD; Drive not accessible/ incorrect function
When I try to copy files and select the D drive, the error message says the drive is not accessible, incorrect function. I have a Satellite P105-S6084. This is an old laptop still running Windows XP. I don't burn CDs very often but I need to back up some files before switching to a new computer. I had this problem years ago (when I first acquired it) and someone told me how to fix it by changing a setting. My recollection from years ago is that I had to find the correct tab and check or uncheck a certain box. But I've tried hunting all over the control panel, using the help dialogs, etc. and I just can't find anything that looks familiar. After I originally fixed the problem and for years thereafter, whenever I powered on the laptop, I received a window asking me if I wanted to enable (or maybe disable) a certain function...sorry, I just can't remember the exact details...and I always answered a certain way. My sister used my laptop awhile back and I think she may have answered the question the other (i.e., wrong) way and essentially "undid" whatever the original fix was (because I no longer get that message). Any ideas would be appreciated. I had a little problem today and although my laptop seems fine right now, I feel like I'm on borrowed time and really need to back up some files.
Satellite P105-S6084
Try Microsoft's fix here.
Also, it's likely your drive has failed. the optical drive is the most likely mechanical component to fail. -
Pulseaudio Error, Home Directory Not Accessible: Permission Denied
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 3.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013
D: [pulseaudio] main.c: Found 2 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 6aee4708a200492ea6f54ed069a7da94.
I: [pulseaudio] main.c: Session ID is 1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
E: [pulseaudio] core-util.c: Home directory not accessible: Permission deniedIt seems to be fine in windows, I have logged a bug for Linux.
Thanks
Sue -
Shared Variable Deployment not accessible in Build Specification
Hi everyone,
I have a large project developed in LV 8.6.1 from which I executed numerous applications. I converted the project in LV 11 sp1f1, everything works well in code, everything is saved.
I wanted to build executable without cod change for LV 11 here is what I found:
Build the executable with Build Specifications inherited from LV 8.6 for which I checked on Use Labview 8.x file layout in Advanced. My application programmatically deploys all internal shared variables and when I wanted to access the Shared Variable Deployment in project in Build Specification then labview locked and I have to kill LV. Other time I did not access the Shared Variable Deployment and I start building executable when it looks the build progressing similar as in LV8.6 and last step before popping the attached error all the saved files in the build location were deleted.
I set up a build specification just for this LV 11. Again I wanted to access the Shared Variable Deployment and again labview is looping something from which I had to kill labview. I opened it again, I skipped the shared variable deployment line and I build the application. Because my application programmatically deploys shared variables I included in builder the lvlib where shared variables belong. The build files does not includes this time as output the file *.lvlib for which my inherited LV8.6 code programmatic deploys shared variables.
My question is should I change the code (very large code) taking out the programmatic variables deployment and to relay on the build executable to do deploy them then what should I do with Shared Variable Deployment line in Build Specification which for my large application is not accessible or is any way to still use the shared variable as in LV8.6 but for which I need *.lvlib in build location.
Another important issue: when I launched my application built as I showed in previous second case, first thing that I see is that my application is not able to save errors (I have a log file where I save different drivers or communication errors). Any idea why application even without shared variable deployed is not able to write a text file? I am administrator of my computer with all rights.
Thank you,
VirginiaNo, I am not able to close Labview because of the windows error with only one button to close application. The application is correct executed. Next time when I start this project it is asking me if I want o recover even if I accept to recover it looks what I had last time it does not save.
For my application also I am building a VI without diagram built as source distribution for which I set in my builder this top vi and I excluded everything from the project because my application copies instances at the run time of this vi as many times as hardware modules I have in the system and also I have this vi included in my application (for the content of this vi). My vi contains interfaces for hardware configuration as well as drivers functions call for each hardware module I have to control in my application. Everything is good building this vi, but in less then one minute after the build is executed and build interface closes again I have the windows error which force me to close project. Next time when I open project I did not see the option to recover the project.
In the mean time I received second message and I wonder if you refer to files names or to folder names or all together. I checked and the maximum size is 122 characters in the vi paths.
Thank you,
Virginia -
Statement not accessible error
Hi, we have upgraded the project from 46c to ecc version.
In one standard include MV45AFZZ , one statement is added IMPORT itab1chk FROM MEMORY.
In MV45AFZB , the value for itab1chk is getting exported.
In 46c , we r not getting any error when we run the VA01 transaction.
But in ECC, this transaction going for Dump giving error 'The statement is not accessible ' referring to the statement IMPORT itab1chk FROM MEMORY which is in MV45AFZZ include.
I tried by adding ID <KEY> to the IMPORT AND EXPORT statement. But still getting same error.
Can any one please suggest the solution.
Thanks,
laks.Hi,
You get this Error normally when you are doing a syntax check on the Includes in which the code lines are not between FORM and ENDFORM.
I dont think this is a serious error atleast till 4.7 as the system will allow you to activate the Include. May be the ECC is a bit more stringent on this issue.
I think your problem will be solved if you try to include all the code lines only in the FORM and ENDFORM.
regards,
Mahesh -
Connector problem : root not accessible
I'm running a midlet and i try to get a file text from the computer i'm using with the wireless toolkit.
But these lines don't work :
String uri = "file:///c:/testinput.txt";
InputConnection conn = (InputConnection) Connector.open( uri, Connector.READ );
When I run it i get the message "is it OK to read your files?", i select yes and then i get an IOException : "Root is not accessible". Do I have to set permissions or something else?
I am also suspecting MIDlets only being able to get data via http... I hope it's not that.
I would be sooo happy if you helped me, I have no idea what's going on with this unaccessible root.My first guess would be that your mix of Support Package levels is giving you problems.
Maybe you are looking for
-
Mountain Lion Server: Network users Home directory mount problems
I am having several problems with my server after a latest name change of the server via Server.app. (A first name change made problems, after that I have been trying to repair, changing the name a few times more. With latest name change, I also chan
-
Anyone know how to fix it?
-
Some probs. after migration from 4.5 to 6i
Hi, I have converted full application which was in forms4.5, Reports 2.5 to Forms6.0 and Reports 6.0. Conversion was cool and my full application is working fine. but i got some probs. 1. file size of new fmb, fmx, mmb, mmx, pll and rdf are much more
-
Acceleration thru GPU in Photoshop CS4 (Intel GMA X4500HD)
Does Intel GMA 4500MHD support GPU acceleration in Adobe Photoshop CS4? (According to recommendation about OpenGL and Shared Model this GPU should support it, but Intel GPUs are not included in Adobe list of supported GPUs at all and I have found 2 p
-
Stop telemarketing Scams/Harassment
This is a list of calls I have received from a telemarketing/fraud ring. The ID on the call is [No Name]. The numbers are listed along with a note of the area code, time, date and message received when the number is called. It does no good to block