NMEA 2000 / Interfacing to Maretron Devices / Actisense NGT-1 NMEA 2000 USB Interface

Does anyone have any information and examples of interfacing LabView to a NMEA 2000 network? Specifically I would like to interface with a Maretron Marine NMEA 2000 network. Through this interface I wish to read and write data sentances to the various network devices.
I do have a Actisense NGT-1 NMEA 2000 USB Interface, that does bring in and display sentances using associated software, if that provides any help.
Thanks in advance,
David

Hi David ,
I am not aware of any specific examples, but it can be done using the VISA USB RAW commands. Look at the links I provided you. You can search for VISA USB RAW to find more information at ni.com.
How Can I Communicate With a Device Using NI-VISA USB RAW Mode?
How Do I Use VISA To Do An Interrupt Out Transfer For My USB RAW Device?
What is the Difference Between USB Raw Control and USB Raw Bulk?
Thanks and have a great day.
Esmail Hamdan | Applications Engineering | National Instruments

Similar Messages

Usb composite device is an older usb device and might not work in USB 3

I recently bought one Lenovo Yoga 2 11 laptop running Windows 8.1 (64 bit).
When I try to connect my old Brother MFC-3240C printer using USB (2.0), it doesn’t work.
Below are the steps performed:
Connected the printer to USB 2.0 port on laptop (on the right side). Automatically installed the printer driver (no exclamation mark beside printer icon)
When the printer didn’t print, I tried to use troubleshoot as below:
Control Panel->Hardware and Sound->Devices and Printers->Right Click on Printer Icon->Troubleshoot.
It came up with USB composite device is an older usb device and might not work in USB 3.0
Removed the printer and re-installed the driver. It is all the same.
Any help will be greatly appreciated.
FYI – the same printer works fine with my older laptops running Windows 7.

Already checked Brothers website for the printer drivre for Windows 8.1 (64 bit).
It says ... The built-in driver is already included with Windows® Operating System or is available through Windows® update.
So, installed the default driver for the printer that is available with Windows 8.1.
Even connected the printer with USB 3.0 port on the laptop, but it is all the same.

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any su

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)

Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

MacBook Pro Retina USB 2.0 devices not working in right side USB port

4 days ago I bought MacBook Pro Retina 15".
When I plug USB 2.0 device to right side USB port, it does not work. OSX does not recognize it, iPhone does not charge, and so.
When I plug the same USB 2.0 device to left side USB port, it works.
When I plug USB 3.0 device to left or right side USB ports, it works without a problem.
Does anyone have this same issue? How did you resolve it?

I have a similar issue with a 13" Retina. Both my ports work OK for most USB devices but the right one won't work with a USB external HD (Time Machine backup). Very consistant.

Firmware update: "The device is not connected to the USB por

Hi, I have a MuVo TX SE GB and I tried to load the new .22.03e firmware on it with a Windows XP SP2 PC. But when I connected the device, and started the firmware updater, it searched for a minute or so, and then the reset question appeared. I clicked OK and then I heard the USB sounds and the new hardware wizard appeared. I followed the wizard, but when it was installing the drivers, a message: "The device is not connected to the USB port" appeared, and the firmware updater closed. The hardware installed fine. But when I try to load the firmware again, the reset question doesn't appear, but I hear the USB sounds, and i get the same message again. I also tried connecting the player in recovery mode but that doesn't help. The player won't turn on. When I connect it, the player is listed in My computer, but I can't open it. What should I do, and how can I load new firmware properly?

PCkid23 wrote:
Hi, I have a MuVo TX SE GB and I tried to load the new .22.03e firmware on it with a Windows XP SP2 PC. But when I connected the device, and started the firmware updater, it searched for a minute or so, and then the reset question appeared. I clicked OK and then I heard the USB sounds and the new hardware wizard appeared. I followed the wizard, but when it was installing the drivers, a message: "The device is not connected to the USB port" appeared, and the firmware updater closed. The hardware installed fine. But when I try to load the firmware again, the reset question doesn't appear, but I hear the USB sounds, and i get the same message again. I also tried connecting the player in recovery mode but that doesn't help. The player won't turn on. When I connect it, the player is listed in My computer, but I can't open it. What should I do, and how can I load new firmware properly?
I am having the same type of problem trying to upgrade some firmware on my microphoto. I would love to get input from some of the guru's out there , Have you tried emailing customer support and asking them? I am waiting for their repy but just bouncing ideas off the forum in the meantime.

How connect to device that sends Midi-Signals via USB?

Hello,
does anybody know how to communicate with a device that sends Midi-Signals via USB? I am working with Windows XP. I would appreciate any kind of hint.

rothencharl wrote:
Hello,
does anybody know how to communicate with a device that sends Midi-Signals via USB? I am working with Windows XP. I would appreciate any kind of hint.You need a bit of hardware that converts USB to ordinary RS232; you can use RXTX then to get the data in; there you can do with it whatever you want.
kind regards,
Jos

Problems with multiple USB devices. (Possible Low Power on USB Bus)

I believe I'm having an issue with the USB bus or one of my devices that I have installed on my iMac.
I purchased this iMac along with a printer (HP C4280 All-in-One) as part of a promotion deal. I also have wireless logitech USB mouse, and iPhone and an 80gb 5th Gen iPod.
My problem has to do with syncing the iPod and iPhone. Normally I have the printer attached to the iMac along with the USB mouse. Both devices function as expected. However I have problems when I connect the iPhone or iPod.
iPod Symptoms: When I connect the iPod the iPod screen shows the flashing red circle with a line but iTunes never launches and the iPod never syncs.
iPhone Symptoms: When I connect the iPhone the iPhone screen says Sync in Progress and iTunes does show the iPhone in the list of devices but a dialog appears giving me one of two messages (that I've seen so far) - [msg 1] Your iPhone is corrupt please disconnect then reconnect to restore. [msg 2] iPhone device timed out.
I've been dealing with this problem for a couple months and found that if I disconnect the printer (HP C4280) then connected either other device then everything works just fine.
I downloaded XCode 2.5 and launched the USB Prober utility. Then plugged in each device in turn and found some interesting findings.
When connecting the iPhone (1st attempt) the USB Logger reported; (iTunes displayed msg 1 from above)
128.517 [1] USB Device iPhone is violating Section 9.3.5 of the USB Specification -- Error in GetConfigDescriptor( wLength = 4)
128.520 [1] USB Low Power Notice: The device "iPhone" cannot be used because there is not enough power to configure it
128.528 [1] USB Low Power Notice: The device "iPhone" cannot be used because there is not enough power to configure it
128.629 [1] AppleIRController[0x2dc8e00]::RearmInterruptRead immediate error 0xe000404f queueing read, clearing stall and trying again(1)
When connecting the iPod (1st attempt) the USB Logger reported; (iTunes never showed that the iPod devices was connected)
938.797 [1] USB Device IOUSBDevice is violating Section 9.3.5 of the USB Specification -- Error in GetConfigDescriptor( wLength = 4)
938.801 [1] IOUSBCompositeDriver[0x39b9f80](IOUSBDevice) SetConfiguration (1) returned 0xe00002ed
938.900 [1] AppleIRController[0x2dc8e00]::RearmInterruptRead immediate error 0xe000404f queueing read, clearing stall and trying again(1)
When connecting the iPhone (2nd attempt) the USB Logger reported; (iTunes displayed msg 2 from above)
1789.023 [1] AppleIRController[0x2dc8e00]::RearmInterruptRead immediate error 0xe000404f queueing read, clearing stall and trying again(1)
1802.166 [1] AppleUSBEHCI[0x28a7000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
1809.166 [1] AppleUSBEHCI[0x28a7000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
I'm suspicious of the USB Low Power Notice. If this is true then I suspect the my iMac might need some type of repair. However I am also suspicious of USB Device violating the USB Spec Error. Although this is the message that appears when I plug in the iPhone or iPod I don't think I can assume that error relates to the iPod or iPhone. The error doesn't specify which USB Device is in violation.
My current workaround is to unplug the printer every time I sync the iPhone or iPod which is cumbersome. I'm also worried that repeated connecting/disconnecting of USB plug for the printer will over time damage the USB port.
I'm not sure what options I have here. Can anyone provide some suggestions or information that might provide some insight.
Best Regards,
xgnomex

A-Ha! Now I'm feeling like my 1.5 hours of reading this forum are not wasted, since I've found others with similar symptoms.
I've only had my iMac for two weeks today. I've got some new accessories & have experimented with the ones I've had awhile (various USB external drives). My model has 3 USB ports, one of which is taken by the keyboard, of course.
Over the weekend, I picked up an MS Office 2008 Upgrade and also an HP Officejet Pro L7680 all-in-one. I only mention the Office upgrade because I installed it on the same day as the printer, but it's possibly unrelated.
I actually have a Belkin 4-port hub--not the same one suggested in this thread, but externally powered with it's own A/C adapter. (It's a Hi-Speed USB 2.0 r-Port Hub, model F5U234 Rev.3, and I used it with a previous iMac G3 CRT with no problem.)
So with a LaCie 100 GB USB Mobile Drive in one of the iMac's ports, and the HP L7680 in the iMac's third port, or the HP via the Belkin hub in iMacs the third hub, here are some of the symptoms I've seen:
1) while browsing in Firefox, suddenly the mouse-cursor will "freeze" (get stuck) in a pull-down selector...sometimes it unfreezes, but eventually (like on the next pull-down menu) the keyboard & mouse will shut off (and if you wait & the iMac goes to sleep, the keyboard won't let me enter my unlock password when I wake the iMac with the Apple Remote)
2) when trying to open a document from the LaCie in MS Word, Word freezes and the keyboard & mouse go dead--terminal beachball--to restart the computer, I have to hold in the power button
3) when trying to print a message in Mail, Finder freezes (though the print job does finish)
These symptoms seem strange! Hey, it's just supposed to work, right? But everything has limits, so my question becomes, "how much stuff can I hook up at once?"
I wonder if this Apple article is addressing this issue:
http://docs.info.apple.com/article.html?artnum=25243
especially when it says "Two high-bandwidth devices or two isochronous devices cannot be connected to a single Universal Serial Bus (USB)."
So only two hi-speed USB devices can be connected "to the same bus" simultaneously? I'm not entirely sure I understand what "isochronous" means, but I'm thinking I need to peel my printer off the USB somehow, maybe via Airport Express--?
Does anyone know for sure about USB limitations? Thanks.
Also, xgnomex, how/where did you find that "USB Logger"? Is that something iPhone-specific, or is it an OS X log in a Library somewhere?

When ever I use Adobe reader 11 with a USB device, I cannot safe remove the USB device and get the following message (or similar one) in system log: The application \Device\HarddiskVolume1\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe with pr

When ever I use Adobe reader 11 with a USB device, I cannot safe remove the USB device and get the following message (or similar one) in system log: The application \Device\HarddiskVolume1\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe with process id 6620 stopped the removal or ejection for the device USB\VID_05DC&PID_C75C\20131215015821328FC8.
I am running on Windows Server 2012 R2 in Desktop Experience mode.
Any ideas?
Roger

In addition to that symptom, I discovered that even though I had closed all Adobe Reader sessions, the processes kept running and used up 90%+ of my CPU.

IOS devices not recognized in iTunes via USB

I am on a Windows 7 x64 home-built computer and I am pretty technically inclined, but this one problem has been bugging me for quite a while now.
I am pleased that Apple wants its devices to sync wirelessly with iTunes from now on, but there are times when it is necessary to plug in the device via USB, such as when transferring large files.
However, in the last few weeks/months, I have noticed that iTunes will not recognize my iPhone 4 nor my iPad 2 when they are plugged in via USB. The computer recognizes the devices, drivers are installed properly, and I can see the devices in Windows Explorer, getting photos off of them that way. However, iTunes does not show the devices with that "plugged in" icon next to them, only the usual sync/eject icon.
This is also a problem because sometimes iTunes just won't "see" the devices, but sometimes it will. Regardless, I need to be able to tether them sometimes for transferring relatively large files via USB. Wi-Fi just isn't fast enough. I suppose I may have to disable Wireless syncing altogether, but I fear that may not fix the problem, because it was syncing via USB just fine in the early weeks of iOS 5 and with wireless syncing enabled. I do have the latest iTunes, I do have the latest firmware for both devices, and I have rebooted both my computer and the devices several times lately, all without effect.
I've done all the simple solutions and none of them have worked. Can anyone explain what's going on and, more importantly, what I can do about it?

Yeah, I've tried 5 out of the 7 steps shown in their troubleshooter. The sixth step is one that is a major pain and I doubt would fix the problem: Reinstall iTunes. I know enough about PCs to feel about 80% confident that this step would not fix the issue. Plus, it's a major hassle with re-adding music to the collection. Nevertheless, I will look at it as a last ditch effort.
The seventh step is extremely vague and doesn't really help. "There might be a software conflict." Fine, but there's no way to find any such conflict, if one even exists in the first place, without a heavy dose of trial-and-error, several hours of time, dozens of reboots, and the patience of Job.
However, they do list some other steps that I'll try when I get home, such as making sure certain services are installed and running. I'll post my results here. Thanks, wiclee.

USB Device Not Recognized on Windows 7 - USB mouse

I have a 4 week old Inspiron 1545 with Windows 7 Home premium that has developed an error: USB errors while trying to install a Microsoft USB mouse on this Laptop. Interestingly, my Microsoft USB Mouse installed perfectly first time and worked for about 2 weeks, and then failed. In looking at the system restore points, it tells me that there have been two driver updates to the USB environment since the unit was shipped from Dell. I wonder if an automatic update from Microsoft has somehow inadvertently updated or replaced a Dell factory driver.
Two nights ago I spent 45 minutes with Dell tech support doing remote control bug fixing on this laptop. They werent able to fix it (in the time allowed). They downloaded at least one of their newest drivers onto this machine and rebooted it - and they seemed pretty savvy - but still not working. So I went ahead a did a system restore to a point about 10 days back because I could see that a USB driver would be affected (as shown in the system restore menus), and I would like to compliment Microsoft on this very cool functionality!
At this point, I've unplugged the USB mouse , used the Device Manager to delete the 'unknown device', and done a system restore back to what I suspected was a working point. But still getting a 'Device not recognized' warning every few minutes, and still don't have a working mouse. I don't want to have to do system restores back to pprevious dates, although I suspect this is one solution.

Hello,
I just wanted to let u know, I had this same issue for about 2 weeks. Basically what happened was a bad install of my AMD Chipset drivers. When I attempted to upgrade, the install didn't go all the way through.
I then restarted my system, and BAM! No Mouse or Keyboard functionality thru USB.
Even when I went into SAFE MODE the Mouse and Keyboard were not functional. The only time they worked was when the computer first attempted to start, BEFORE windows loaded.
So, this means that your issue is a software problem.
I thought it was some other software that I installed, and ran a restore session, but that wasn't the issue. Still no functionality.
I even tried removing my CMOS battery, to reset it, since some people said that had solved their problems...Still nothing.
I then read other forums around the web using my Android phone to try and find a solution, only those solutions were no help.
I was also advised to run: MSCONFIG and Hide all Windows programs and then stop every other driver, source from loading (of course if my mouse and kb worked, I would have tried that).
I had even read that because I was using USB, that I should try using a PS/2 Mouse and Keyboard connection.
It took me 2 weeks to get the correct PS2 adapter that worked, which would essentially allow me access to my system again...
I Purchased a USB A Female to PS2 (MDIN6) Male Adapter (for Mouse) from http://www.SFCable.com
This my friends, was a lifesaver. I only have one PS2 port on my system, so I used my mouse to try every option I had previously read about. Of course you cannot type because the keyboard doesn't work, so you need to know the location of the folder where
the programs you are trying to run are.
So, a little after I got back into my system, and I closed down all programs, the warning screen came up that ALL of my USB Ports failed and could not be updated. I even Uninstalled every last USB port from the System Properties and restarted, and still
that didn't work.
I had forgotten that during the time when this problem arose, there was a failed install of my AMD chipset drivers, so luckily I had not deleted the source file and I tried to reinstall, and VIOLA! I'm back up and running and my USB ports are restored
and everything is working!
I hope this solution is able to help other people out there.
Thanks,
JE - [email protected]

Unknown USB Device when MuVo TX plugged in USB P

The following message came up when I plugged in my MuVo TX in a USB Port
Using WIndows XP
USB attached has malfunctioned
Windows does not recognize it
Unknown USB Device
Does this mean that I have a faulty player? When I first bought it on January 2 2005
I installed approx 25 songs and it works perfect. Now that I want to change these songs
to new ones, my MuVo TX is not recognized by Windows XP. Tried several other
computers with same results.
Can any one suggest a fix?
Thanks

If other PCs are giving the same error, then I think you can be sure the player is at fault somehow.
Have you tried the recovery process? Download the latest driver (if required) and firmware from http://www.nomadworld.com/downloads/drivers. Install the driver file (if required). After you have installed the driver, press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file and check/tick the 'Format Data Area' check box and click on 'Start'.
If this doesn't help then I think you can be sure the player is faulty.

WiFi device that plugs directly into the USB slot on a printer?

My next door neighbor has a MacBook with Airport installed. She wants to use the portable around the house and send documents to a printer located in the basement. She does not need a router to network additional devices, so what is the most reliable, reasonably priced device that plugs directly into the printer's USB port without the use of a cable (e.g. device with receiving antenna)? Thanks.
Bob

Well, Badunit, it's more convenient and takes up less room if it plugs directly into the USB port, plus you save the cost of a cable unless one ships with the unit. Here are two I found at Amazon:
http://www.amazon.com/Compact-Wireless-802-11n-Newtork-Adapter/dp/B002VVITG8/ref =sr_1_6?ie=UTF8&qid=1311880281&sr=8-6
http://www.amazon.com/802-11g-Wireless-Long-Rang-Network-Adapter/dp/B0035H4164/r ef=pd_cp_e_4
Trouble is, they have too many negative reviews. Besides, just how well do they work with the Airport Extreme card since most of these reviews are not Mac related, and those that are are negative?
I'd like a device that is guaranteed to work well with the 2008 MacBook Airport card as the broadcast device. Perhaps she will have to rely on a separate Linksys router with print server.

Driver Install Failure (Bluetooth Device: Broadcom BCM20702A0/Kinivo 4.0 USB Bluetooth Adapter)

About a week ago I purchased the Kinivo BTD-300 4.0 USB Adapter from Amazon (http://www.amazon.com/Kinivo-BTD-400-Bluetooth-4-0-adapter/dp/B007Q45EF4). When I go into the control panel it shows up as a Broadcom device. I have ran the software available on the disk and installed it multiple times and downloaded drivers straight from the Kinivo and Broadcom website and installed both of those to no avail. I have successfully connected my phone with the device, but since then it has shown up with the troubleshooting symbol. I have also ran the Microsoft Fixit and HP Troubleshooter which both came up as a driver error, but when downloaded it would come up as "Driver install failed". I've tried all of these steps multiple time with the error everytime. Any possible fix or advice would be greatly appreciated!!
Thanks,
JJ H

Hello @leafgreen7,
I understand that you are having issues getting the Kinivo BTD-300 4.0 USB Adapter to work on your HP Pavilion HPE h8-1124 Desktop PC running Windows 7 and having no luck. As it is the driver that will not install I would advise you to contact Kinivo at their Support Site as they will have more specific information on what can interfere with their drivers installing.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

[Solved] Persistent Device Naming for Full Disk Encryption & USB Boot

Using the following boot option does not work while using FDE (dm-crypt plain) due to the filesystem being unreachable until decryption.
cryptdevuce=UUID=xxxx-xxxx:root
sda
└ root /
sdb
└ sdb1 /boot
This forces the use of /dev/sda for booting, but occasionally a USB device is mapped to sda instead.
Is there a way to use Persistent Block Device Naming for this type of FDE?
Last edited by easton741 (2015-02-05 01:42:57)

MSC wrote:What exactly is not working? It shouldn't matter if the USB device maps to /dev/sda because the partition with that UUID still resides on the same disk.
I guess I should be more clear. The entire sda device is encrypted. This meas that during the initialization there is no UUID is read from the disk because the filesystem cannot be read until it is unencrypted.
This leaves me in a catch 22 where I cannot use UUID until the device is unencrypted, but I need UUID to boot & decrypt the device properly. Here is an example of what the computer sees in the Arch Install.
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
sdb iso9660 ARCH_201501 2015-01-01-09-54-22-00
├─sdb1 iso9660 ARCH_201501 2015-01-01-09-54-22-00 /run/archiso/bootmnt
└─sdb2 vfat ARCHISO_EFI 9051-9287
sdc
└─sdc1 vfat 4EC5-5B7D (normally /boot)
As you can see, sda has no uuid.
So I guess what I'm asking is if there is any alternative method because it does not look like I can use anything in the wiki.

Shuffle 2 - device not recognized... USB Driver?

I got the Shuffle 2nd Gen, plugged it into my PC, and it blinks orange with no install box on Windows, and a "device not recognized" error. Nano works fine on my computer, and my Shuffle works fine on a Mac laptop, so customer service told me it must be a problem with an outdated USB driver.
Here's the problem: I don't know where to get the USB driver update, because my PC is custom made, and I don't know who the manufacturer is. The customer service guy says to find the maker of the motherboard, but I'm not 100% sure how. My Device Manager says "VIA USB Enhanced Host Controller" is the only listed Enhanced (2.0) USB Port. I used a program to find the motherboard manufacturer, and I think it's a "Chaintech 7VJL APOGEE."
Can anyone help me find a USB driver? Might something ELSE be the problem?
(I'm reposting this from a reply I wrote to a different thread)
iPod Shuffle 2nd Generation Windows XP Custom PC

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

NMEA 2000 / Interfacing to Maretron Devices / Actisense NGT-1 NMEA 2000 USB Interface

Similar Messages

Maybe you are looking for