NMH300 Issues : Indexing, recent files, web interface ...
Hi,
I am presently having A LOT of problems with my NMH.
I tried to reboot, different drives, different settings with drives (raid, linear ...), different firewalls, different IP settings, different route settings, cat5 and cat6 ethernet cables ... And IT IS NOT WORKING !!!
At first, i just tried to use the NMH as a Media Server for my music and video files.
I was trying to stream content with my playstation3 (videos and music files).
It was working well for videos but the music folder was a complete mess (the web interface shows some unreallistic ID3 information) and some files don't appear int the web interface.
(I formerly was using PS3 Media Server on my laptop to share content mith my PS3 and the music folder was NOT a mess, all my files were ok and playing good).
I have to tell that my ID3 tag are quite allright (except some personal files not tagged).
At that time, the main problem was a really slow and unstable access so streaming music was not really good.
I looked for a solution and about 3 months later, I found something out ...
The problem that poped out from forum searchs was a maximum of files allowed by the NMH.
I had to many music files so the indexing was never ending, the acces was very slow, copying a 100Mb video file could take more than 30 mins ...
So I just made a backup of my datas, formatted my Seagate 500Gb drive and then just copied some files (not a lot) in each music, videos and pictures folders. At that time, it was pretty ok (except that I had some issues trying to connect to the web interface but anyway, the ps3 was accessing files quite good)
I was using around 50 files in each media folder.
Then I plugged in my second drive (Western Digital 640Gb) to use it in linear mode (btw, this is what I would like to have in a final time : about 1Tb in linear mode).
At that time, still working quite good.
I added some videos files (about 100Gb), my pics collection (about 15Gb) and some more music files. (8Gb in less than 7000 files in order to keep indexing working good).
And here I am now, with my MediaHub half loaded (still have more than 65000 music files waiting for a solution !!!), trying to browse with my PS3:
- videos look good, browsing and streaming both ok
- pictures look good too, I can browse the folders and see my pics without a problem
- music ... well, I cannot browse the folder anymore (in ps3 tree menu "folder" does not appear anymore, only "artist", "album", "playlists" ...) which is really annoying for me (I use a a lot of sample libraries and each have their own "artist" and "album")
But anyway, I decided to give a look at the web interface and I noticed that the recent files that were showing up were files that were not present anymore on the disc !!! It seemed like the only recent files showing were files I added 2 months ago.
I was looking at the "recent files" I was using when I first set up my NMH for the first time ...
By now, I've read some threads about this problem but there no solution.
Some helped resolving the "indexing" issue. I tried to reboot several times, formatted the Seagate then the Western Digital drive to see a difference but nothing.
So my questions:
Is there a way to have a full working NMH concerning music and ID3 information ?
Is there a way to completely clear the NMH music information database to have it ready to be re-filled ?
Did someone managed to have a stable installation ?
And finally, can you browse your music folder and see the original tree (as you see it in windows) ?
Thanks a lot for your help and information.
Well ... I tried ... It failed !!!
The TwonkyMedia settings page currently shows :
Content
Music Tracks : 3830
Photos : 251
Videos : 465
Radios stations : 0
My clients are all set up as they should be
(except my isp box which shows "generic media receiver")
I tried different options to see if there were any differences (auto-share media with new clients on/off, ftp enabled/disabled, iTunes library service on/off ...) but there is no way I can see my music thru the web interface.
As a consequence, I cannot reach my music from the outside. (over the web for example).
I even tried to use a blackberry, an iPhone, a HTC Desire and an iPod touch to see if I could access my files thanks to the twonkymedia ( h t t p : / / [ my ip ] : 9000 ) ... The twonkymedia page shows up (I can't access any file (music, video nor photos) because of a gateway timeout.
I just don't get what's wrong with my NMH but I really am fed up with it ...
To sum up, thanks to your links Wilkins377 :
- I now can complete the scanning without any problem.
- My music folder is now browseable by folder (as shown in windows) thru the PS3
- I now can turn off the NMH by pressing the power button during 5 seconds (it used to restart)
But ... (again) ... :
- Hardrives won't stop spinning and both drives are very very hoooooot (can't touch them !!!)
- As a result, the NMH is really noisy and noise isn't stoppipng at all (24/7).
- No recent music files and no music files at all in the NMH web interface.
Please help me !!! Anyone ... I'm desperate ...
PS: I didn't upgrade to 3.8.15 so I still am using the 3.8.14 firmware. Everything was ok at first (I mean when I first installed my NMH) before I tried the 3.8.15 so I'd prefer not to upgrade as I am certain that the NMH CAN work well on my network with the 3.8.14 firmware.
Similar Messages
-
Re-opening most recent files/web sites--how can i disable this?
when I close a window and then reopen it, or when i log out and then log back in, the most recent thing I was looking at from before immediately pops open. That is not necessarily the way I would like it to work--didn't do that with Snow L. How can I disable this?
In System Preferences > General > uncheck Restore windows when quitting and re-opening apps.
Note that this preference affects all apps.
Regards,
Captfred -
"open recent file" menu item - 2 issues / aspects (Mac & Windows)
regarding the "open recent file" menu item in the File menu.
1) should have a way to "clear recent items". Most software solves this by appending an item "Clear Recent Items" to the bottom of the list of aliases that springs forth from the menu.
2) Further, in the preferences it should be able to be set to 0 to prevent the function entirely, not just natural #s 1-99. This is the case in Windows Adobe REader, and on the Mac it was the case the last time I was able to check, but due to the bugs in 9.1.x regarding the ability to handle a case-sensitive file system I haven't been able to even open the preferences on the mac for a while.Michael:
Thanks for your quick reply.
Please note that this issue: "open recent file" menu item that is not clearable, nor is the system preference able to be set to retain 0 files,
has absolutely nothing to do with the file system issue. It is just a design choice (or oversight or bug depending on your point of view).
It is an issue of security/privacy to not have the Reader keep a list of recently viewed files, or to at least allow the user to clear the list.
Thanks again for your time, interest, and speedy reply.
Cheers! -
Range of Variable in Web Interface Builder
Hi,
I have created a Web Interface Builder in BW-BPS. I have created Cost Center as a Variable. However, I am unable to get this range of cost centers say 1001 to 1005 in Web Inteface Builder.
Whereas, in the Planning Folder, this works fine and I am able to select the range of Cost Centers from 1001 to 1005.
The issue is only with WEB INTERFACE BUILDER.
Looking forward for some valueable inputs.
Regards,
RaviHi Mayank,
Thanks for your reply.
I will also look at the different options given.
I also found the following thread is more useful.
BSP Value Help Input Field and Select-Options Ranges
I will let you know on this.
Regards,
Ravi -
Unable to Access CSACS 5.3 Web Interface...
Hi Everyone,
I wanted to note an issue I ran into today with our MS Windows 7 workstations and 2008 servers being unable to access the web management interface on our instance of ACS 5.3 and its solution, which is outlined below:
### The Problem ###
When I tried accessing the web management interface on our ACS 5.3 appliance, the browser was unable to connect. NMS applications showed that the device was up and I was able access it via SSH. I then tried connecting to 443 via telnet on my workstation and was successful in establishing a connection. I proceeded to issue the "show application status acs" command showed all associated processes running. I had a co-worker attempt to access it and he ran into the same issue. I then proceeded to restart the ACS application by stopping and starting the associated processes. After the processes were back up, attempts to connect to the web management interface still failed. I then proceeded to reboot the appliance. Again, after the applicance and processes were back up, attempts to connect continued to fail. As a last ditch effort I used a portable version of Firefox to connect and was then successfully able to connect.
### The Source ###
After additional troubleshooting, it was discovered that the MS Internet Explorer patch associated with MS Security Advisory 2661254 just so happened to be the culprit. This restricts the use of certificates with RSA keys less than 1024 bits in length. The default management certificate just so happens to be 512 bits in length.
### The Fix ###
Using FireFox, I navigated to System Administration > Configuration > Local Server Certificates > Local Certificates. I then proceeded to add a certificate in the following steps:
Select Generate Self Signed Certificate & click next
Populate the Certifcate Subject field with the appropriate DN information of the ACS server.
Change the key length to 1024 or above.
Check "Management Interface: Used to authenticate the web server (GUI).
Check "Replace Certificate".
Click Finish.
The ACS server should then generate the new certifcate, replace the existing management certificate, and restart the ACS processes. After everything is back up, you shouldn't have any issues in accessing the web interface.
Cheers,
DanHello Dan,
Thank you for trying to share the information you have.
Note please if you want to share information you can post a document, not a discussion.
You can convert this discussion into a document from the right pane menu.
Greetings,
Amjad
Rating useful replies is more useful than saying "Thank you" -
Adobe Bridge issue with index.html files
Hi, I have a perplexing problem.... Three weeks ago, I created a web photo gallery in Bridge. I transferred it to my website via FTP and it worked like a charm. Three days later I created another web gallery transferred it to my website using my ftp and the address of what I uploaded takes me to a blank page. I contacted my web hosting support and was told it looks like an issue with my index.html file. Here is a link to the gallery that is working: www.janieblanchard/com/galleries/prettylights/index.html
Here is the link to the site that is not working:
www.janieblanchard.com/galleries/macrogallery/index.html
Any advice would be so helpful, I've spend too many hours trying different galleries and uploading multiple times.
Thanks!What exact camera make and model?
What specific, exact version of Adobe Camera Raw (ACR) plug-in?
What specific, exact versions of Bridge and of Yosemite?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Jsp-file="/WEB-INF/index.jsp" cannot load
Hi,
I am defining a servlet in the web.xml file using the following syntax.
<servlet>
<servlet-name>TestServlet</servlet-name>
<jsp-file>/WEB-INF/index.jsp</jsp-file>
</servlet>
Then when I tried to access this servlet, I get a 404 not found error. The weblogic.log
file complains with the following message:
java.io.FileNotFoundException: no resource '/WEB-INF/index.jsp' in servlet context
root '/home/dev/web/apps/MyApp'
at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:293)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:227)
at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:115)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:922)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:886)
at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:269)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:380)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:268)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
My jsp file in located in /home/dev/web/apps/MyApp/WEB-INF/index.jsp, I know weblogic
doesn't support jsp under WEB-INF, however, according to Sun's Servlet specification,
anything under web-inf should be accessible to getResource and getResourceAsStream
method, and it looks like that's what weblogic implementation is using (from the
error message). So I am not sure whether this is weblogic issue or I am doing
something wrong. By the way, the above config in web.xml is supported in Tomcat.
What version of WebLogic will incorporate Servlet spec 2.4 and allow jsp under
web-inf?
Chris
"Narayan Anand" <[email protected]> wrote:
>Regarding S-12864 - It will not work as stated in the solution in any
>of
>the available releases of WLS.
>Please ignore that. I already informed the concerned person to correct
>the
>solution.
>
>The story behind this is:
>Our engineering team is already aware of the fact that the request
>dispatcher calls (include/forward) for a jsp under the web-inf directory
>works in other app server - Tomcat.
>Our engineering team had a discussion with the servlet/jsp spec experts
>group for clarifying the spec and the tomcat implementation.
>So the servlet expert group has decided to explicitly state in the spec
>that
>RD.forward() and RD.include() should be allowed access to resources in
>/WEB-INF and it will be included in servlet spec 2.4. For now, WLS works
>as
>per the current specification.
>
>So far the story is - WLS will implement this in our next major release
>which will be compliance with servlet spec 2.4.
>In all the currently available WLS releases, accessed to a jsp under
>the
>WEB-INF directory is prohibited.
>
>--
>Best Regards,
>Narayan Anand
>Developer Relations Engineer
>BEA Systems, Inc.
>
>
>
>
>
>
>"Ming Fan" <[email protected]> wrote in message
>news:[email protected]...
>>
>> Thanks for the explanation. So this means weblogic treats such mapped
>servlet request
>> as a direct request to the jsp under WEB-INF, instead of forwarding
>it to
>some
>> JspCompiler servlet and let that compiler servlet use some resource
>loader
>to
>> load the jsp and then compile. I believe that latter implementation
>approach also
>> conforms the Servlet spec (it's a different way of treating the request,
>I
>guess).
>>
>> Now here's another question. According to Web logic Customer Support
>Solution
>> ID S-12864 (WLS 6.x - Cannot access JSP under the WEB-INF directory),
>the
>servlet
>> should be able to get a request dispatcher, and then forward the request
>to the
>> jsp under WEB-INF. I am still using WLS 5.1, so does the above solution
>apply
>> to 5.1 also? It doesn't seem to work with 5.1. So is this a 5.1 problem
>and I
>> should upgrade to 6.1?
>>
>> Thanks.
>>
>> "Narayan Anand" <[email protected]> wrote:
>> >Hi Ming,
>> >
>> >It is legal to put files under WEB-INF directory. But as mentioned
>in
>> >the
>> >spec, it will be available only to servlet code and not directly to
>client
>> >request.
>> >Read the last statement of the same paragraph in section9.5.
>> >"Since requests are matched to resource mappings case-sensitively,
>client
>> >requests for '/WEB-INF/foo', '/WEb-iNf/foo', for example, should not
>> >result
>> >in contents of the web application located under /WEB-INF being returned,
>> >nor any form of directory listing thereof.".
>> >
>> >So in your case, when you access the servlet which gets mapped to
>> >/WEB-INF/your-jspfile, under no condition it should result in display
>> >of jsp
>> >contents.
>> >It is working as per the specification.
>> >
>> >I hope this helps.
>> >
>> >Regards,
>> >Narayan Anand
>> >Developer Relations Engineer
>> >BEA WebLogic Support
>> >
>> >
>> >
>> >"Ming Fan" <[email protected]> wrote in message
>> >news:[email protected]...
>> >>
>> >> Actaully there are other ways to solve my problem. But what I am
>> >interested to
>> >> know is under the Servlet specification 2.3, is it legal to put
>jsp
>> >under
>> >WEB-INF,
>> >> define it in <jsp-file> xml tag, and should the JSP compiler be
>able
>> >to
>> >see this
>> >> as a resource. Apparently, Tomcat allows this behavior, so does
>this
>> >mean
>> >Tomcat
>> >> conforms better to the Servlet spec, or Tomcat is wrong but Weblogic
>> >conforms
>> >> better? Can anyone let me know what's the correct interpretation
>of
>> >section 9.5
>> >> in servlet spec 2.3?
>> >>
>> >>
>> >> "Jerrie Pineda" <[email protected]> wrote:
>> >> >Try moving it to a different dir. You normally don't place jsp
>file
>> >> >in the
>> >> >WEB-INF dir.
>> >> >
>> >> >
>> >> >"Ming Fan" <[email protected]> wrote in message
>> >> >news:[email protected]...
>> >> >>
>> >> >> Hi,
>> >> >>
>> >> >> I am defining a servlet in the web.xml file using the following
>> >syntax.
>> >> >> <servlet>
>> >> >> <servlet-name>TestServlet</servlet-name>
>> >> >> <jsp-file>/WEB-INF/index.jsp</jsp-file>
>> >> >> </servlet>
>> >> >>
>> >> >> Then when I tried to access this servlet, I get a 404 not found
>> >error.
>> >> >The
>> >> >weblogic.log
>> >> >> file complains with the following message:
>> >> >> java.io.FileNotFoundException: no resource '/WEB-INF/index.jsp'
>> >in
>> >> >servlet
>> >> >context
>> >> >> root '/home/dev/web/apps/MyApp'
>> >> >> at
>weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:293)
>> >> >> at
>> >weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:227)
>> >> >> at
>> >>
>>
>>>weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:
>2
>> >0
>> >> >0)
>> >> >> at
>> >>
>>
>>>weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.ja
>v
>> >a
>> >> >:115)
>> >> >> at
>> >>
>>
>>>weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextI
>m
>> >p
>> >> >l.java:922)
>> >> >> at
>> >>
>>
>>>weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextI
>m
>> >p
>> >> >l.java:886)
>> >> >> at
>> >>
>>
>>>weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletConte
>x
>> >t
>> >> >Manager.java:269)
>> >> >> at
>> >>
>>
>>>weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:380
>)
>> >> >> at
>> >> >weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:268)
>> >> >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
>> >> >>
>> >> >> My jsp file in located in
>/home/dev/web/apps/MyApp/WEB-INF/index.jsp,
>> >> >I
>> >> >know weblogic
>> >> >> doesn't support jsp under WEB-INF, however, according to Sun's
>Servlet
>> >> >specification,
>> >> >> anything under web-inf should be accessible to getResource and
>> >> >getResourceAsStream
>> >> >> method, and it looks like that's what weblogic implementation
>is
>> >using
>> >> >(from the
>> >> >> error message). So I am not sure whether this is weblogic issue
>> >or
>> >> >I am
>> >> >doing
>> >> >> something wrong. By the way, the above config in web.xml is
>supported
>> >> >in
>> >> >Tomcat.
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>
>
-
Content Library / Web Interface - access issue
BPC Microsoft 7.5 SP6
Windows 2008 R2 server
We have puublished an Excel template as an HTML page to allow (web only users) access to a menuing system and have subsequent access to their individual reports in PDF format. The menu page comes up without errors but I encounter the error "You don't have access" when clicking on a menu option (cells within template). The cells contain an Excel Hyperlink function in conjunction with a EVBNV function to launch this report. (No BPC or excel errors exist within template)
We have created a virtual directory for BPC application in addition to Reports and ReportServer for Reporting Services. We have modified the Site Settings and Folder Setttings in Reporting Services configuration to allow web users to correct role access.Users can access Reporting services Report url without a problem but the web interface does not want to launch/retrieve a pdf file. We have the correct BPC task capabilities and task profiles assigned, insuring they can access and use the content library.
Thoughts?
Thanks in advance.It appears there is an issue with EVBNV formula and its ability to dynamically pass parameters in HTML format.
IM 0003554460/20111 -
File Sharing over web interface?
I am trying to figure out a solution.
We are an advertising agency that we need to transfter files between our studio and clients (which are mostly PC based and cannot connect to conventional ftp server) so we are looking at creating something like dropbox.com.
I don't mind to work over afp, smb, ftp or WebDav, but I need an nice enough interface and it's got to support OS X server's user/ permission ACL.
I know for calendars, Mac OS X server has built an web interface out-of-the-box, but how about file sharing over web?
Anyone sharing any thoughts?As I said in my original post, I'm not using Firewire Target Disk mode because it requires a full shutdown of one of the computer (usually my laptop) each time I want to access files from the other computer.
I don't know about you, but usually I've got several things going at the same time on my computers and I'd rather not have to fully shut down the MacBook Pro several times a day.
ps - directing me to a different solution doesn't explain why things aren't working properly in the first place, but thanks anyway -
Ssis issue - load recent added 5 flat files
HI
i have one query like i have 5 flat files in one folder today i loaded into sql server table,tomorrow again added 5 flat files in same folder.i want to load recent added 5 flat files,
can any one give me answer?You need to have a loop and inside it have a step to check for file modified date for getting the recent files. Much better is if filename has timestamp part use that to determine the latest files
see example here
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
N1SM 1.3.3 Web Interface Issues
Hi
I have installed N1SM 1.3.3 , Linux version on a RHEL 4 U4 AS.
The installation process is completed and the web interface has started.
The issue right now is : I do not see either the Service provisioning system
or the N1 System Manager in the web interface.
All I get is the error "You Do Not Have Access to Any Application
No application is registered with this Sun Java(TM) Web Console, or you have no rights to use any applications that are registered".
I tried adding the application using wcadmin command and enabled it as well with no luck.
Please guide me with this last step of installation process.
Thanks in Advance
Balaji.kHi Tarzanek
Thank you so much. It really helped to get me the N1SM integrated into the web interface and i was able to login.
Can I get your help on couple of things I have as issues now.
1) When I click on the "SUN N1 system manager" link in the web console, it throws the error saying
"Access Denied.
Unknown User.
This user is not registered with the N1 System Manager. Contact your Security Administrator to request addition of the user to the N1 System Manager."
In the /var/log/messages, I see the message
"Sun Java(TM) Web Console[13336]: User root successfully authenticated to the console"
"pam_access[13935]: access denied for user `root' from `(null)'
2) If I use n1sh, I get the error "Lost connection to command line service"
I have restarted n1sminit with no luck.
If you are familiar with the solution for these two issues, could you please let me know .
Thanks
Balaji.k -
BPS Document in Web Interface - Issue
Hi,
I am in BW 3.5 BPS.
1. I've switched on doc. property for 0costcenter, 0costelmnt, 0version
2. In the planning level, 0costcenter/0version are header characteristics limited to
one value and 0costelmnt in at row of layout
3. I've switched on "Read documents" in layout
4. Web component for doc. is setup in web interface and i can able to write comments into the text window
My problem is, when the comment is saved, i expect to save for combination of costcenter/version/costelement and KF.But what happens is, the comment is stored across version..meaning, i can see the comments even if i switch the version.. Is there anywhere i am missing..??
Regards,
KTHi,
I solved the issue. In my layout, i got 0version to display additional version like budget and the layout selection is set as "line". So basically, the system cant identify which version the combination can create..I thought it is smart enough to pick the version that is changeable...
Instead of line selection, if i set cell selection, then the document is getting created for particular version.
Regards,
KT -
Web Interface - "Execute function before displaying the layout" issue
Hi Experts,
In my project we have converted some BPS planning folder to Web interface. The steps are as below:
1) Open the BPS planning folder using upspm. Copy the web interface as Web Enabled folder.
2) Generate the web interface by clicking on go to --> Generate web interface
3) Run transaction bps_wb. Open the web interface. Then generate web interface again
4) Run the web interface by clicking on 'Display perview'
5) In the web interface there are some some functions which get executed before displaying the layout.
6) For such functions, push button gets created.
7) I have set the visible property of such push button as false.
8) Most of the time, when I am running the web interface, it
is getting executed successfully.
9) Some times, the web interface is not displaying the layouts successfully.In such cases I have observed that "Execute function before displaying the layout" is not working. Due to this some values like Fiscal Year is not getting set. So, the layout is not getting displayed.
10) I understand that it may be due to compilation error.
For example, I might have made some changes in the web interface. It must be saved and web interface must be regenerated before I diplay the interface again. Can you please help me in understanding the reason of this problem.
11) Can you please help me understand the cause of point no 9. Is it a non-issue? What may be the reason that "Execute function before displaying the layout" does not work every time.
ThanksWill a function that runs, before the data gets saved, work for you? You can configure such a function to run before the save command behind the save button you create in the planning application.
-
"Invalid file" icon in web interface
Hi everybody,
I'm developing a java class that connects to the iFS and upload a file. My code is based on the OTN examples (http://download-uk.oracle.com/docs/html/A96698_01/creatdoc.htm).
I've followed the steps in the tutorial to create a file in the iFS. The file is uploaded correctly, but when I use the web interface to look for the uploaded file, I see a invalid file icon aside the name of the file, instead of a normal file icon.
Am I missing anything? The only attributes I set are the name and the content of the file. Is this the problem? Do I have to set the contentType or similar?
If I use the web interface to upload the same file, the icon that appears is the "normal file" icon, not the "invalid file" icon. What are the differences?
Thank U in advance.You probably didn't set the Format for the Document you created. The web interface displays icons based on the Document Format. (Look at the javadoc for the oracle.ifs.beans.Format class.)
-
Since installing CS3 about 2 weeks ago, have had the problem of using Save As to a network path that is not persistent. When starting CS3, it fails to open until network paths in recent files are restored.
It seems to lookup all recent file locations while starting up.
Is there any way to override that lookup?>Is there any way to override that lookup?
set the recent file list size to 0.
Maybe you are looking for
-
Hi Is there some way to re-name entity objects, view objects and their packages after creating them? I think one option can be to rename the various folders on my PC where I am storing all the source code, but I am not sure whether this is the way to
-
Smart Form Language Print Problem
Hi , i want to ask that in PO smart form if i am taking print preview. then vendor & Shipping Address are not coming in print preview...another fields are coming like tele & Fax No these are store in numeric value but these name1 and street store in
-
Yesterday I decided to install Windows on my MacBook. I had both a Windows XP installation disk and a Vista Upgrade disk. I successfully did both according to the Boot Camp instructions. After tweaking Vista and downloading software and upgrades that
-
No option to select black and white photo printing on d110a
anyone know of a patch or fix.I can only select grayscale or color.I would like to be able to print some photos in black and white.
-
Cant use Canon LBP5050 under Mavericks
Hello, Using a MacBookPro 17 with Mavericks and dont get to a result installing and using canon lbp5050 network. I tried uninstalling all the old drivers and stuff and restarted and reinstalled but I always get the message when trying to print "print