No 1080/50P support.. WHY?!

As good as FCPX is, why after over a year since release can it still not support 1080/50P?

I can confirm that FCP X 10.0.5 and some earlier versions can import 1080/50p from my Panasonic SD800 perfectly.
HOWEVER, there is one proviso  .  .  .  you must not mix normal AVCHD footage with 1080/50p on the same card.
1080/50p must be the only footage on that card.

Similar Messages

  • Import 1080/50p from Panasonic TM900

    I saw, that there have already been some discussions about importing 50p footage with FCP X in this forum.
    In particluar I found one thread
    No 1080/50P support.. WHY?!
    where I understood, that import should work from a Panasonic camera, at least when there in only 50p movies stored on the card.
    Though:
    I am still not able to import the 1080/50p from my Panasonic TM900. When I plug the camera to my MAC, open the import window in FCP and go to CAM_MEM (the internal memory of the TM900), it shows some files in the file list. In particular one file named AVCHD (which, according to the size seems to be the file where the 50p footage is stored). But all these files are displayed in grey and can't be imported by FCP (I use latest release 10.0.7).
    Does anyone have same experiences or (even better) a solution ?
    Seems strange to me that it works with some Panasonic 50p footage (according to thread mentioned above) but not with my TM900.

    Thanks a lot, Tom, Alchroma and AppleMan for the quick answers.
    At the end, all your responses plus some further testing gave the solution:
    The problem was, that I used the built-in memory of the TM900 camera rather than an SD card.
    I now tested with an SD card and situation is as follows:
    - 50p footage on the camera built-in memory is NOT recognized by FCP X - the import window shows the folder
      structure instead of clips
    - 50p footage on SD card & Camera with SD card plugged into MAC via USB:
      again the 50p clips are NOT shown in the import window
    But finally there is a solution:
    - 50p footage on SD card and SD card directly plugged into card slot of the MAC:
      in this case ALL clips (50p as well as AVCHD 25i) are shown in the import window as expected and can be
      imported without any problem
    Again, thanks a lot, your answers somehow guided me to the solution ;-)
    One more point, where probably one of you can help me:
    It seems that with the 50p footage I now definitely have to use optimized or proxy media (which I never did before), as my MAC is not able to play the 50p clips in the preview without lost frames.
    As I'm a bit struggeling with disk space, I would prefer to use proxy media rather than optimized, but of course I don't want to have any quality loss in my final movie.
    Did I get the following right ?
    If I switch back to "use optimized or original media" just before exporting my movie, FCP will use the original media for the export, even if all the cutting workflow was done with the proxy files ?
    Or will the us of proxy media in any way influence my final movie.
    Happy to receive any confirmation on that topic and/or probably a recommendation, what is best workflow to deal with the 50p footage that brings my MAC to its limits.

  • FCS 1080 50p incompatibility question

    I was seconds away from clicking the add to cart button on a Panasonic HDC-HS900 camcorder when its manual finished downloading from their website - so I took a look...
    For as long as I remember, I have always prefered shooting in 25p at 1/25 or 1/50 - it's just so much easier on the eye - but that is aesthetic and subjective. Sometimes I like to use slow motion effects for various reason and found in the past that using a 50% speed on 25p SD gave an acceptable slow motion effect. But I want to move on from SD and I am checking out various HD camcorders. I figured that using 50p footage would allow me to slow down to 25p to produce a much improved slow motion effect - and maybe I could still push it a little further if I wanted.
    It was at this point that I accidentally read in the manual that 50p footage was incompatible with Mac software. It only named iMovie but that was enough to stop me in my tracks and start searching for more information. I found nothing but bad news insofar as my slo-mo plan - but the short story is that 50p is not compatible with FCS.
    But before I give up on this camcorder, I thought I would ask if there is a way to import 50p HD and slow it down to 25p for use in FCS.
    Any thoughts?

    Well, after several days of consideration, I finally ordered the Panasonic HDC-HS900 but it was not without a great deal of bewilderment - wondering why what had become a virtual industry standard video editing application does not support the top end of consumer HD video.
    After having migrated from Premiere to Final Cut almost ten years ago, I already had reservations about the way FCS was going with the release of FCX which, when I tried it out, felt like a retrograde step to try to pick up ambitious iMovie users. I somehow got the impression that FCX was a totally different product and that FCS would still be developed but it seems that I was wrong.
    Having then discovered that Premiere does a number of things which FCS does not and now that it imports 1080 50p video without any third party messing around, it seems that I will be migrating back.
    I'm sure it will not be without a lot of catching up and I may find at some point that either the migration to Premiere is too problematic or that Apple update FCS.
    Salt and vinegar?

  • 50p support

    Sony HDR-CX130E
    AVCHD / MPEG-2
    HDD / Memory
    PAL
    iMovie does not support footage recorded in 1080-50p from this Camcorder
    Video stabilization limitations more...
    Requires Mac OS X v10.6.7 more...
    When or will you solve this problem??? This is reduculis - Why it is not supported? Yes - it's my fault that i did not check before buying a new CAM - but we are living in fast growing world, with a lot of opportuinities - and Apple must be the leader of both.
    Do something=) Please=)

    Send them a report anyway at
    http://www.apple.com/feedback/macosx.html
    and let them know.

  • How can i read my 1080 50p files from my panasonic camera

    Hi all newbie here can someone give me the name of software that can read my panosonic HDC-HS700 1080-50p files from my camera i can read the HA 1920 files okay but just cant read the 1080 file, people tell me that the imac doesnt support the 1080-50p files but surely there must be some software that can read from my camera.
                 Regards to all Pete.

    Hi  EZ  Jim, 
    After reading and following the info you sent through, i realised that the question i asked was totally wrong.
    my question is that my mac cant read or even see the 1080/50p on the hard drive of my cam, because apparently the Panasonic HDC-HS700 is not compatible with Apple can you beleive that, so now i have got to go out and by the software from Panasonic install on a crappy windows machine and then onto a portable hard drive and then back into my Mac.what a load of c--p.
    So thanks EZ for your help it was in any event usefull info that you gave me,
    My very Best regards Pete.
    EZ Jim wrote:
    You're welcome.
    We will watch for your status update.
    (Hope you and Fido have a nice walk! )
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • 1080/50p to mp4 playback issue

    Original camera capture from JVC HM600 1080/50p H.264 converted to Apple Pro Res 422 and imported into FCP7. (iMac OSX 10.7.5) Movie exported as default MOV. MOV then converted to mp4 using Mpeg Streamclip.
    Problem is mp4 file not playing back when connected to tv or monitor using usb pen drive. TV plays audio only and monitor says file not supported.
    Conversion never been a problem before when using other camera formats such as 1080/50i or 1080/25.

    I think this was the issue. I used MPEG Streamclip to compress to mp4 again but at 25fps this time - and now plays back ok.
    Thanks for your help

  • Problems using 1080/50p video files in Premiere CS5 to Encore onto Blu-ray

    Firstly apologies if this has been covered, I've searched various forums but not found anything on 1080/50p.
    I have a Panasonic HDC-TM700 video camera which I only had for a week or so before I went on a weeks holiday in Egypt, so I thought I'd record my memories in the superb 1080/50p mode.
    Upon returning I am now editing my work in Premiere CS5, the resulting video is very jerky (it plays back OK on the camera), rendering a sample in Encore I discover Blu-ray doesn't support 1080/50p so I tried the HDTV 1080i 25 setting, on the resulting Blu-ray the panning scenes are not smooth viewing and the video is still rather jerky.
    Should I have recorded the footage in 1080 interlaced instead?
    Does anybody know if I can salvage my memories?
    Hoping you can help
    Regards
    Kevin

    I have the same camera, only it's NTSC so 1080p60. What I do for now, until there is wider acceptance for this format, is that I export to 720p60. I know I may sound like a party pooper but I prefer progressive before interlaced...  I am sure there will be support for 1080p50 or 1080p60 in the near future, so your memories will not be lost!
    Some Bluray players do support 1080p60/50, but not from a disc but an SD card instead. If that's an option for you, go with that!
    Here's the player I use which plays back 1080p60 beautifully from SD, I'm sure there is an equivalent player for PAL:
    https://panasonic.ca/english/audiovideo/bluray/players/DMPBDT100.asp

  • Converting 1080/50p video for import into Premiere Elements

    Hi there,
    I'm currently looking into buying an HD camcorder, and editing software to go with it.  I'm considering getting a camcorder which can record in 1080/50p for future-proofing, however I see that Premiere Elements doesn't currently support 1080/50p editing.  I was wondering whether I could sensibly shoot video in 1080/50p for archiving, but convert it down to either 1080/50i or 720/50p prior to importing into Premiere?  Is there a suitable intermediate input format which Premiere supports and which wouldn't result in a significant loss of quality due to the extra transcoding step?
    Also, what is the recommended system requirement for 1080/50i and 720/50p editing?  I have a 2007 Macbook (2.2 GHz Core2 Duo, 4GB RAM), would that be sufficient?
    Thank you.

    Thanks a lot for the very quick response Steve.
    I suspect shooting 1080/50i is likely to be the way to go, I'll obviously have a play once I get the camera.  I just wanted to check whether it's feasible to shoot in 1080/50p, but convert to 720/50p prior to importing into Premiere Elements.  That way I can keep a copy of the 1080/50p clip to use in a few years time when the consumer editing software has caught up.
    If I were to do that, what's the recommended file format to convert to prior to import?  Is there something similar to AIC (Apple Intermediate Codec) which is fast to convert to and edit from - ideally I'd rather not convert to 720/50p H.264.  Is there a list of Premiere Elements' supproted input formats somewhere?

  • 1080 50p live with sound - have no sound in PP 5.5

    Hello
    Filmed a clips with Pany AG - AF101 - 1080 50p live with sound (not a slow motion) ..... when i put clip on time line i dont get sound - i dont even get a separate sound line like if there is no sound at all.
    but when video is played inside camcorder - there is sound.
    also i tried that file in my other soft - Corel Video Studio X4 pro - and there is sound - plays it no problem
    so why no sound in PP 5.5? what i do wrong ? plz help!
    Regards

    What are you editing, and does your project match your video?
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Videoschnitt HD 1080/50p

    Hallo,
    kann mit dem Mac 2,8Ghz, Intel Core i5 das Video raw material 1080/50p bearbeitet werden? Imovie 11 kann glaube ich nur 1080/25p

    Sie könnten Final Cut Pro X versuchen:
    http://www.apple.com/finalcutpro/specs/#supported-formats-and-io
    Also, check out "more like this" on the right of this page.

  • 1080/50P Blues

    I bought a Panasonic HDC SD700 camcorder and shot some video in 1080/50P. iMovie, it seems, does not support this which seems a bit odd for Apple! I can only download those clips that I shot in a lower format to my MacBook Pro 2.66. I have searched this site for some solution but with no real success. I really would appreciate any help in finding a solution so that I can edit my clips and save myself money by not having to buy more SD cards.

    Motion Image*1 (AVCHD*2 : PAL area)
    [Full HD] 1920x1080, 50i (sensor output is 50p, 17Mbps) / [Full HD] 1920x1080, 50i (sensor output is 25p, 24Mbps) / [Full HD] 1920x1080, 24p (sensor output is 24p, 24Mbps) / [HD] 1280 x 720, 50p (sensor output is 50p, 17Mbps)
    Motion Image*1 (MP4*2 : PAL area)
    [Full HD] 1920×1080, 50fps (sensor output is 50p, 28Mbps) / [Full HD]1920x1080, 25fps (sensor output is 25p, 20Mbps) / [HD] 1280x720, 25fps (sensor output is 25p, 10Mbps) / [VGA] 640x480, 25fps (sensor output is 25p, 4Mbps)
    http://www.panasonic.nl/html/nl_NL/Panasonic+producten/Lumix+Digitale+Fotocamera %27s/G+Micro+System/DMC-GX7EG/specifications/12911411/index.html?trackInfo=true
    I believe the AVCHD only does 50i where the MP4 does 50p

  • Panasonic HDC-SD707 1080/50p & Premiere CS5?

    Hey there i really need some help!
    I got me a new Panasonic HDC-SD707 and till yesterday i always shot at 1080i/25...
    but finally i wanted to shot in 1080/50p since this is the future and the reason you need this cam^^ (says panasonic) and progressiv got these nice details!
    OK!
    so i went out and filmed some stuff at 1080/50p... put the files on my mac (via clipwrap)... and then i saw the problem!
    quicktime play the files but not really smooth. sometimes the picture moves way to fast, then it slows down, then it plays at normal speed, fast,normal,slow.... and so on.
    so i started premiere cs5...
    and here are my questions!
    1. first of all there is no such preset for 1080/50p... am i blind? or isn't it there? and if it's not there... why?
    2. i tried a lot but premiere also doesn't play the files right... i also tried to use the ".mts" files straight from my cam but it's the same problem... is there anything special i have to do?
    3. is it possible that it is impossible to use the files recorded at 1080/50p and i need to stick with 1080i/25?
    I hope someone can help and my english is good enough to get the problem...
    I would really love some help because i'm just getting into video and don't know how to fix this problem on my own!
    Thanks in advance :-)

    1. It is not standard. Use the New Item icon in the project panel to get the correct sequence settings.
    2. See #1.
    3. No, you can edit them OK, but you can't export them, since the only allowable export format is 1080i/25.

  • How can 1080/50p edited videos be delivered?

    Having spent the last couple of years slating the 1080/50p (or 1080/60p) format for general film-making I am now prepared to give it another chance!
    It appears that 1080/50p can now be edited in a 1080/50p project in FCP X.
    I imagine the problem arises when you come to export.
    Can it be exported to H.264 for playback on the web at 50fps?
    If exported to DVD will its frame rate be reduced to 25fps?
    Pros and cons of using this format would be appreciated.

    The web doesn't care what you put on it. The person who has to download will though. Standard DVD only supports 25p. Blu-ray only supports 50fps in 720p not in 1080.

  • After installing itunes 11.1.5, i get a message that says no apple support why?

    AFTER INSTALLING ITUNES 11.1.5, I THEN GET A MESSAGE THAT SAYS
    NO APPLE APPILACATION SUPPORT WHY ??????????????

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • 1080 50p importing problem.

    I have imported 1080 50p avchd into fcpx but it plays back at practically 25p with missing every other frames (like a freeze-frame of the previous frame) but some of it has imported correctly from the same card and camera. It says it has imported it all at 50fps, but it clearly hasnt. Same problem with 720 50p files, some fine, some wrong. Does anyone know what has happened?

    Motion Image*1 (AVCHD*2 : PAL area)
    [Full HD] 1920x1080, 50i (sensor output is 50p, 17Mbps) / [Full HD] 1920x1080, 50i (sensor output is 25p, 24Mbps) / [Full HD] 1920x1080, 24p (sensor output is 24p, 24Mbps) / [HD] 1280 x 720, 50p (sensor output is 50p, 17Mbps)
    Motion Image*1 (MP4*2 : PAL area)
    [Full HD] 1920×1080, 50fps (sensor output is 50p, 28Mbps) / [Full HD]1920x1080, 25fps (sensor output is 25p, 20Mbps) / [HD] 1280x720, 25fps (sensor output is 25p, 10Mbps) / [VGA] 640x480, 25fps (sensor output is 25p, 4Mbps)
    http://www.panasonic.nl/html/nl_NL/Panasonic+producten/Lumix+Digitale+Fotocamera %27s/G+Micro+System/DMC-GX7EG/specifications/12911411/index.html?trackInfo=true
    I believe the AVCHD only does 50i where the MP4 does 50p

Maybe you are looking for