No 2 way connection between printer and computer HELP HELP going nuts!!!

On the hp website in downloads for hp officejet 6500 series for windows 7 is "additional information' for installing that particular printer for that windows 7, now under "printer setup not complete" it says how to bypass the problem I have though those comands obviously don't work with my windows xp so can someone translate those commands for windows xp so i could try and fix my problem (hope that all makes sense) Also a few questions, the network is setup and passed so should i need to change any ports or does the network setup do it itself? Do you have to have a separate printer icon for usb and wireless,(though i won't need usb when i get this sorted). And why does the hp solution centre no open it comes up with a file that cannot run how do i fix this? HELP

The sync is one way - computer to ipod.

Similar Messages

No connection between iPhone and computer

I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
Please help me.
Sorry for the bad english.

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

520 - Connection between mobile and computer

I would like to upload music and videos to my Lumia 520. The OS on my computer (Windows XP SP3) always needs a support app., starts every kind of programs and doesn't recognize the mobile phone. Is it any opportunity to connect the phone to the notebook (PC)?

Also need Windows Media Player 11 or higher ..
Next you may try is after connecting the phone to PC, open device Manager on the PC and under Portable Devices..Right Click on the Lumia device listed .. and select Uninstall-->OK. Then at the top ...Action-->Scan for Hardware changes and wait till the Drivers get reinstalled ..
Now check ..

Does syncing using the music tab a 2 way street between device and computer?

So i went through my music and added ratings to it on my comjputer. i synced my ipod with auto sync and everything transfered over fine. then i accidently added a folder to my itunes library i didnt want and rather then sift through the library and remove the songs added from that folder (since it wasnt my music) i decided to erase the entire library and just re add the folder withonly my music. i thought the ratings would still be there, but they wre all gone. all that work. even my playlists were gone. i mean, they were still there, but no music was in them. even after i re added the same music that once was once there, the playlist didnt auto populate themselves. lets just say i messed everything up, and since my ipod was on auto sync, i knew the next time i plugged it in it would erae all the ratings and playlists. so i used a program called iexplorer and it let me copy all my music back to itunes and i got most of my ratings back (not the playlist though because my computer crashed while the playlists were being populated and totally forgot about itunes and auto sync, so when i opened ituens, my ipod started syncing and basically it synced the new un orginized library with no playlist and most of the star ratings. For some reason not all the songs had the ratings, but most did. so i cant complain cuz i at least got lucky. ok, now onto the question. i dont want to go through my library again and re do everything, so im going to do it slowly through the ipod while im in transit. my question is, when i update playlist and rate music on the ipod, wheni plug it into ituens, will the ratings and playlist i made on the ipod transfer over? i know this was quite the long post for such a simple question, but i just wanted to share my bumble headed story of how i nuked my library.

The sync is one way - computer to ipod.

Slow image data transmission between printer and computer

My work computer was recently updated with Windows 7 from Windows XP. During the migration Adobe Acrobat XI Standard had to be reinstalled. After the reinstallation of Adobe Acrobat XI Standard the data transmission of the scanned image from the printer (HP LaserJet 3030) has been extremely slow. The original installation of Adobe Acrobat pre: migration worked fine - normal data transmission speeds. It should also be noted that a new 64 bit HP print driver had to be installed before Adobe was able to do its basic scanning functions.
Any assistance would be greatly appreciated.

Hey whkling,
Could you please let me know what exact dot version of Acrobat XI Standard are you using.
Also, try printing some other PDF file and check if the same problem persists.
Let me know.
Regards,
Anubha

Connection between iPhone and computer.

Hi, perhaps somebody can help me. When I connect via USB the iPhone 4 with my laptop, the laptop doesn't recognise the iPhone, resp. the USB connection.

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Solution for connection between BODS and WCF web service ?

Hi,
we have a unique requirement of connecting BODS to WCF webservice. This web service acts as a layer for connection between proprietary databases (secured) and other external systems. Queries are to be sent to this web service in order to fetch data from proprietary databases.
In order to connect to these web services, we should also provide Address, Binding and contract whose details are already present with us.
Example of web service address: net.tcp://op12345:10101/sd
I heard Adapters are the best way of connecting to the above web service, could you please provide some guidance on connecting through adapters if it is the best solution.
Could someone suggest the best possible approach(ASAP) to bring connection between BODS and web services and to execute the above requirement.
Please let me know in case of any more information.
Regards
Surya

Hello Nir,
I tried to import the my VS2008 + .net 3.5 as Wsdl local file to the Xcelsius 2008 but there is message unable to load url.
I tried to import your Wsdl developed by .net:
http://www.webservicex.net/airport.asmx?WSDL
and it works ok.
Can you send me or print here the service class definition and the configuration file for http://www.webservicex.net/airport.asmx?WSDL?
Thanks in advance,
Sergey Osmachkin

Internet sharing between cellphone and computer us...

I have watched some videos in youtube about internet sharing between cellphones and computer using "BLUETOOTH"... How do they do that? How can we do this? Anybody here can share to us how to do this??

24-Aug-2008 12:28 PM
monkeyboy85 wrote:
I personally would not of thaught this is possible as bluetooth is essentially just a radio signal, obviously it can transmit data but i dont think it has the ability to stream a broadband connection. Could be completely wrong but thats what i think.
You are wrong
Most Nokia phones with a bluetooth interface can let you connect your computer to the Internet using your phone as a modem connected by bluetooth. So, BT definitely can support the data stream.
Enabling a computer to use the phone's Internet connection over BT or via USB cable is possible with no additional software on the phone. Doing the opposite, allowing the phone to use the computer's Internet connection via BT, requires additional software. GNUBox does just that.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Novice trying to connect between office and home MACs

Advice for system novice
trying to connect between office and home MACs
Office MAC OSX 10.2.8 (also runs classic mode)
G4 Computer in the office (only mac in office all others are PC)
I need to connect home computer
IMAC OSX 10.4 Tiger. Connecting via cable modem and have router
I do not have good networking skills, i this something that is doable myself or should I call in a pro?

It's doable.
But at home you need to find the "outside" IP that the Internet sees, not the one you see on that machine.
what's my ip...
http://www.whatsmyip.org/
Then you'll need to "Forward Ports" on the home router so incoming stuff knows where to go.
Then you'll need to enable the Services you wish to use on both machines.

How to establish an Oracle connection between server1 and server2

I am trying to establish an Oracle connection between server1 and server2 specifically, while logged into server2 launch OEM on server1. Can anyone help me out here on establishing this connections between the 2 servers. thank you inadvance

I am assuming this is 10g.
Same way you connect from your desktop to the server using the URL (e.g http://server1:1158/em).
But you have to ensure that server2 can see server1. They cannot see each other, then it is not OEM problem.
if it is not 10g, then let me know

Connection between O and BP is missing

Hi,
When i check inconsistency for a user, i am getting " Connection between "O" and "BP" is missing. When i check the Org.unit in PPOSA_BBP, i could see no BP exists for that Org.unit where user is assigned. I have replicated the org.unit from HR system but yet the BP hasnt been generated. Can you please share your idea on this.
Regards,
Prasath J

Hi Prasath,
This might be because you need to assign the user to a Purchasing Organisation or a Purchasing Group. If the user do not have BP created then you can do this by using tcode USERS_GEN.
Go to USERS_GEN and follow below steps :
1. Select Create User From Existing SU01 user
2. Enter the org id of the POrg or Pgroup under which you want to assign the user
3. Select country and execute
4. In next window one popup will occur, select Area Of User
5. In next popup enter the user id
6. Next select the user and click Ok.
7. This will create a BP and CP for the user and assigns the BP to the Org id of the POrg or Pgroup.
8. Now check the consistency of the user it will show all green.
It might give you error like eMail id for BP XXXXX is missing if the SU01 profile of the user does not contain any user id but it is not critical.
You can open the BP in BP tcode and enter the email id of the user.
Let us know if it solves your issue.
Regards,
Mayur

I had to upgrade from ios7 to ios8 but it needed more storage than i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?

i had to upgrade from ios7 to ios8 but it needed more storage i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?

Restore the backup from your computer

Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

I live in Japan,
I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

No 2 way connection between printer and computer HELP HELP going nuts!!!

Similar Messages

Maybe you are looking for