No 2g out going calls in my BlackBerry z10

Hii,
In 2g networks, my phone doesn't support outgoing calls. But i can message and the Internet is also working in 2G network. (incoming calls are also working in 2G).
Please help me to resolve it..
I got troubled more times witout the 3g network..
Have anyone this problem..??!

alifsha wrote:
Hii,
In 2g networks, my phone doesn't support outgoing calls. But i can message and the Internet is also working in 2G network. (incoming calls are also working in 2G).
Please help me to resolve it..
I got troubled more times witout the 3g network..
Have anyone this problem..??!
Hello, 
is it only 2G nrtwork reception you have? Have you tried to put your phone in "Automatic" mode?  

Similar Messages

  • After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

    after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
    It is not practicale to do this always any one faces the same problem

    There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
    If no change with a new SIM card, the standard troubleshooting steps in order are:
    Power your iPhone off and on.
    An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPhone with iTunes from your iPhone's backup.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, your iPhone has a hardware problem.

  • Iphone 5 problem with in & out going call with iOS 8.1

    I have a iphone 5 and i had updated it to ios8.1 recently.
    After doing so, i started having problem in both in and out going calls. It work only for a brief period after i restart the phone but after a while it gives me the same trouble.
    I already tried to reset the phone to factory settings,  but it still doesnt effect.
    Please help me to get rid of this problem..
    Warm Regards
    Smaran

    Hello there, Smaran89.
    Great job troubleshooting on your own to resolve your issue. The following Knowledge Base article offers up some great and thorough recommendations for troubleshooting issues with making or receiving calls on your iPhone:
    iPhone: Troubleshooting issues making or receiving calls - Apple Support
    Follow the steps below to resolve this issue. Please test after each step.
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Check your phone settings:
    Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
    Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
    See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update. 
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap  Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Out going call problem

    i have iphone 5
    i am not able to make out going call
    i restore twice but no use
    other functions is working properly like incoming etc

    Hi kittupatsa,
    If you are having issues making calls on your iPhone, you may find the following article helpful:
    iPhone: Troubleshooting issues making or receiving calls
    https://support.apple.com/kb/TS3406
    Regards,
    - Brenden

  • Out going caller I.D still not changed

    how can i change my out going caller I.D, i have called and emailed, i was even assured that it would be changed,  still waiting,  mean while my freinds and family are ignoring my calls, the name in question is foreign to them

    We've called Verizon at least 7 times and asked them to correct this problem.  Everyone has a different answer.  Today, they said we needed to take the batteries out of all of our landline phones to "clear the memory" and that would fix it.  Still not fixed.  I don't think anybody at Verizon knows how to change the caller ID banner !

  • Why do out going call take so long to connect?

    Sometime it can take up to 3 minutes for an out going call to connect.  It does not seem to matter how many bars I have or where I am.

    Thanks for you reply.  I would love it if my outgoing calls would connect faster.  Yesterday it took 5 minutes to connect.
    I have am LG spectrum running VS93022A firmware, Android version 4.1.2. I did have a lot of recent calls stored, so I deleted all of them and them I removed my battery and reinstalled it.  Finally, I ran a software update check.  All these activities seem to have fixed the problem.  I now takes only seconds for a call to connect.thanks!Susan
    >> Personal information/e-mail reply/headers removed to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • My out going call failed

    my out going call failed

    please let me know which service provider you are using if it is vodafone then follow this simple procedure type
    *#31# and press the call button your problem is solved

  • Call blocker for BlackBerry Z10

    Anybody can guide me how can I block unwanted calls.
    My handset BlackBerry Z10 OS 10.3

    if you received a call from unknown no, the app will state the no is from spam list. U may list any no to the list. So, next time if u receive any call frm the list, u may ignore it.

  • How can I find out the incoming call and out going call from my orher chine

    How will I know if my friend knows who I call

    It is not you who have blocked them. The caller has opted to block their number from displaying on caller id displays. You can find out who it is by answering the phone. In the future, if the caller dials (I believe) *82 before your phone number (in the us anyway) the number should appear. Ask them to do this in the future. Some medical facilities and women's shelters have caller Id blocked for privacy reasons.

  • Cisco SX 20 Out going Call Dialing issue

    Hello Team,
    Hello Team,
    We are using Cisco SX20 and configured the Public Ip address,
    We can able receive the call from outside but not able call dial out,i have tried several Public IP address for the testing but none of them not working.
    There is no gatekeeper ,Public Ip address configured directly to the system.
    Please suggest the same 
    Thanks in advance

    Looks like there could be an issue with the test addresses on http://vtctest.pointsofdata.com/ - however, 140.242.250.204 and 140.242.250.205 both works - these are Polycom hosted test facilities. Would be an idea to try either or both of those.
    If you can't connect to those addresses, SSH into the system, use the following commands;
    systemtools network ping 140.242.250.204
    systemtools network traceroute 140.242.250.204
    This should give you an idea where the call fails.
    (You can also get xstatus and xconfiguration by loggin in remotely using SSH.)
    /jens
    Please rate replies and mark question(s) as "answered" if applicable.

  • CME - can not dail PSTN (out going calls )

    hello ,
    i have CME installed on 2900 router , incomming calls are working fine but i can dial PSTN calls.
    below error is comming in Debug:
    Outgoing call from gateway: gives diconnect cause value = 34 no circuit

    Hi Aslam,
    1.Could you please explain the complete network topology and please upload the debugs that you collected with the called and the calling number.Also attach the relevant controller config, serial interface config, dial-peer etc to analyze.
    2.Cause value 34 implies that there is a mismatch in channel mapping either on your end or the provider's end.
    3.So we need to check if we are sending this error message or if we are receiving this error message.
    If we are receiving this error message, then provider needs to correct the channel mapping on their end.
    4.If we are using H323 then try to change the isdn channel order using this command on gateway
    "isdn bchan-number-order" as well as try changing the channel order from under the gateway on CUCM, if we have a CUCM in the network topology.
    5.Make sure we have configured only those channels that we are allowed to inside a Controller for pri group command.
    Thanks & Regards,
    Mudit Mathur

  • Problems w/ out going calls hearing me

    I have had my Droid X for 5 weeks now and suddenly having problems with people hearing me. I have no problems hearing them but they can't hear me.People claim that I sound like I'm 10 feet away.I also noticed that I do not have the 3G signal. I received another droid because they couldn't fix the problem and now I'm faced w/the same problem. Any help would be greatly appreciated. 

    You dont have a 3G signal when you are on a call. Have you rebooted your phone. Its like a PC and needs to be rebooted every now and. The reccomendation is to turn your phone off and on everyday .

  • CISCO SPA232d Out going call "NO CALLER ID"

    i have device cisco spa232d, i have two sip accounts one for incoming (number IN) one is outgoing calls.
    i did configured incoming and outgoing but when I'm calling from my phone it is showing Unknown number or No Caller ID. this device first time I'm using i maybe I'm missing something.
    Number IN Server Name :  IPCOMMS
    OUTGOING Service Name : voipwise

    Press phone 'offhook icon', drag down, settings, show my number = On.

  • Cannot connect out going calls - only able to recieve

    I am having an issue across all platforms (ipad, pc and xbox) I can recieve calls but I when I try to make video or vocie calls it rings my end but not for my contact (who was just in the kitchen). This is only on my log in and it works for everyone else in my household! Help!

    Not me, and you must be referring to iMessages, not SMS/MMS which is exchanged over a carrier's cellular network only.

  • How can we get the web cam to work with sykpe or any out going calls

    can get the web cam to work with skype

    Hey there,
    What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • Sender and receiver on the same server

    Good morning! We plan a TDTIM for 2 different SIDs but with their Oracle DBs on the same server (NOT MCOD). If we use them as the sender and receiver respectively, any concern about the performance? Any other concerns? We know that TDMS within the sa

  • Validation Of  selection screen in Module pool

    Hi Guru, I am giving Plant as input at selection screen. Below that I am creating one table control at selection screen. I have to do validation of the Plant at the selection screen. I am doing that IN PAI module. But when i give wrong plant at selec

  • 7.5 breaks playback of QT files

    Ever since upgrading to leopard I've had trouble with QT -- mostly with fullscreen playback of files. Now with 7.5 out I decided to see how things were going: they've gotten worse. Fullscreen playback appears to be working just fine with divx files (

  • Photoshop Elements + :30 mins kills Keyboard entries

    Head scratcher d'Jour: When I am using Photoshop Elements 10, after twenty minutes, the wired USB apple keyboard (A-1242) stops entering alphabetic keyboard characters into any word fields. This applies to any fields in P/S such as file names or typo

  • Product Inclusion/Exclusion for customers on sales orders

    I work in a regulated industry.  To export product outside of US, many international distributors needs to register each material with their goverments, depending on the country.  We currently control this using the inclusion lists for the applicable