No 3G toggle on iOS4?

i dont seem to have the 3G toggle that used to have on my 3GS. Does iOS4have a 3G toggle swith?
I bought a new iphone 4 and restored 3GS settings. Has something gone wrong here?

Something has gotten garbled in your initial setup. Your only choice now, to insure your problem is software & not hardware, is to restore your phone as "new" and not from backup. When finished, disconnect from itunes, verify that all is working properly, that you have the 3G setting, etc. If so, sync your content back to your phone.

Similar Messages

  • Backbeat 903 Bluetooth Headphones and iOS4

    I have a pair of Backbeat 903 headphones (originally from Altec Lansing, now Plantronics) that I love, and they've worked great with my iPhone 3Gs for 6 months.
    I just upgraded to iOS4 on the iPhone, and I found that the Play/Pause toggle button on the headphones no longer works correctly. If the music is already paused, it does nothing. If the music is playing, the button makes the audio cut out for a few seconds while the track keeps playing, then the audio comes back in after a few seconds.
    I wondered if something had happened to the Backbeat's button, so I looked into exchanging it under warranty. Before sending it, though, I purchased a new pair. I just got the new pair and they are doing the same thing, which means this is probably an iPhone software issue or Bluetooth issue.
    Anyone else having this problem? Any suggestions?

    I'm relieved -- I thought I had done a reset before, but I guess I didn't follow all the way through.
    My bluetooth issue was fixed by holding down the Sleep/Wake and Home buttons at the same time, waiting through the power down screen, blackout, and finally the silver Apple logo.
    When I repaired with the bluetooth headphones, the play/pause toggle switch worked as expected.

  • IOS4.1 introduced problem with accessory connection Nissan

    My 2010 Nissan Versa has a factory radio with an iPod port. The iOS4.0-4.02 versions worked fine with this port. I'd get a single popup on the phone when I plugged it in, warning about 3g interference, and then I'd have full control of the "ipod" app via the car's audio controls and iphone audio was routed to the car audio system. The iPhone would display "accessory connected" when switching to the ipod app.
    Now, with iOS4.1, the popup pops up endlessly, and the car audio keeps trying and failing to link up to the ipod app on the iPhone. You broke my car iPod connection in iOS4.1
    Bummer. Just FYI, I suppose, but it would be nifty if this regression could be fixed in a future version.
    Message was edited by: johninsj

    iOS 4.1 has caused problems with my iPhone 3G's ability to communicate to my 2010 Nissan Cube as well. Navigating through the music menus ends up being very sluggish. Then I can play a track, but partway through it will sound like it's a CD that skips due to going over a big bump. Then it will just stop playing and then only way to get back to music from the iPhone is to toggle the car stereo to FM or CD and then back to iPod. Then it will start messing up again within a few moments. It's so bad that it's not even worth trying to play music from the iPhone.
    To be honest, I've never been very happy with how the iPhone interfaces with my Cube. It works great with my iPod Touch, but the iPhone and the Cube don't always play well together.
    I was at the Nissan dealer today and they hadn't heard about this issue and checked to see if there were any software updates on their end, but there aren't any.
    Please Apple... fix this!

  • Bluetooth toggle needed

    Hi,
    this is an improvement request for non jailbroken iPhones!!!
    I am using Bluetooth with the Handsfree in my car. Very good... However I don't have Bluetooth activated all the time to save battery life. Therefore I am switching it on when I get into the car and switching it off when I go off the car. For jailbroken devices there are tools to easily switch from the Homescreen of the iPhone. For non jailbroken devices - which I use - I have to go to Settings - General - Bluetooth and switch it there. This is not convenient. With iOS4 there have been so many enhancements but I really miss these tiny little things like this BT toggle.
    Please don't send answers like 'why are you not jailbreaking...'
    Maybe Apple can comment.
    Thanks

    Maybe Apple can comment.
    Not here. This is a user-to-user forum.
    Submit feedback, including feature requests here: http://www.apple.com/feedback/iphone.html

  • IPhone 3GS & iOS4 Issue

    Since updating to iOS4, I've noticed that when listening to the iPod app I'm unable to load new updates into other apps, they just time out. Examples:
    - Mail & Messages apps cannot send/receive messages
    - Safari cannot open any web page
    - 3rd party apps (Weather Channel, for instance) time out or I receive "Cannot connect to server" message
    Once I stop the iPod app everything loads quickly. This happens on WiFi or 3G. I've already done a clean restore (not from backup), but I still have the same problem.
    Another related issue is that occasionally when using the iPod app, if another app interrupts (a phone call, say) the iPod pauses (as it should) but then doesn't restart once the other process is completed (ending of phone call). I have to restart the iPod app to return to what I was listening to before.

    Here's the issue I am having, along with a "solution" or at least what I've figured out. The main issue is that iPhone 4 is not getting mail appropriately from the GMAIL Exchange server.
    - iPhone 3GS running iOS4 works fine.
    - iPhone 4 has a problem reading mail from GMAIL Exchange server
    Settings for both are exactly the same:
    EMAIL: myemail
    SERVER: m.google.com
    DOMAIN:
    USERNAME: [email protected]
    PASSWORD: mypassword
    USE SSL: on
    With this setup, my iPhone 4 seems to get Push notifications OK, but fails when trying to get mail via normal sync (i.e. when you go browse the inbox). It will sit there "Checking for Mail" until it comes up with an error contacting server. Having tried all the other listed solutions (i.e. drop and re-add acct, reboot phone, toggle SSL, use 3G only, etc.) I had no results, so I played with it until I got a solution.
    THIS IS WHAT I FOUND:
    I can get the mail sync to work perfectly if I change my username from [email protected] to just myusername (delete the '@gmail.com'), but then I can't send email out. Switching back to the full [email protected] fixes sending emails but breaks the normal email fetching, so I suspect there is a bug in the iOS mail software that's appending an '@gmail.com' or stripping it depending on what you're trying to do, but these two should be consistent to avoid this problem... we need a FIX!

  • Mobile Me CONTACTS not coming down to iOS4 and lost visual voicemail

    I updated my 3GS to iOS4 and everything seems to be working, howver my contacts haen't repopulated the phone form Mobile Me. they are all still there on Mobile Me, but when I go to contacts on the iPhone, there are none and unlike previously, opening contacts on the phone does not force a sync (no spinning clock-wheel)...
    I have tried turning off the Mobile Me setting on the iphone and then restarting it, but still no contacts...
    I also lost my visual voicemail.... when I go to voicemail, it wants me to physically dial up voicemail...
    Any ideas here?

    dmbono wrote:
    Try turning off push and instead fetch every 15 minutes. There seems to be a bug that prevents data from getting through on push. Hope they remedy this soon!
    Huh? A "bug" would affect all devices using the OS. I have no idea what you are talking about as push worked just fine here after allowing a little time for my phone to be re-provisioned by the network. That took longer than normal due, I'm sure, to the large number of folks trying to do the same thing I was. And we've all hear AT&T whine that we evil iPhone users are breaking their network.

  • Accordion-Toggle Open and Close

    I apologize if this has been covered before, but I checked
    and couldn't find a solution. I'd like the accordion to toggle
    between open and close the same panel. Right now, when I click on
    it, it opens, but it doesn't close when I click on the same panel
    again. Is there any way that can be achieved?

    Don't you just want the :
    http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/collapsible_panel_sample. htm
    http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/collapsible_panel_sample. htm

  • My iPod Touch can no longer download Podcast Videos after upgrading to iOS4

    After upgrading OS 3.1.3 to iOS4, My iPod Touch (2nd Generation) can no longer download such video podcasts as NBC News, CBS News, ABC News and Cranky Geeks from iTunes store. The moment the download starts, there is always an annoying prompt "this video cannot be played on this iPod".
    It's really frustrating!!!

    Same thing happening to mine also, still cant find a reason.
    Message was edited by: glynn1019

  • All of a sudden I can no longer toggle or clip angles in multiclip sequence

    Hi,
    I've got a project with a number of sequences, videos, angles, etc and all of a sudden I can no longer toggle between angles in the sequence timeline. It was working last night and then stopped and it's still unresponsive. Every time I click to switch an angle or cut to an angle I get the alert beep.
    I am not out of disk space and haven't changed any settings as far as I am aware of.
    Thanks

    Not sure what the deal is...have you added any new software or upgraded/updated anything since this started?
    Have you tried opening an autosave version, to see if it works there?
    Trashed prefs, run disk utility?
    I'm not sure I've ever heard an 'alert beep', so would wonder if the drive is failing.
    Can you be a little more explicit about exactly how it 'stopped working'...were you right in the middle of working on it, or had you stepped away for a bit?
    Have you tried shutting down, then rebooting after 15-20 minutes?

  • The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?)  If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my doc

    The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?)  If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my dock has resided at the right margin so all my slider manipulation over countless editing sessions in Aperture has been ingrained to work at the left margin -- but, the vast majority of the time, the HUD overlaps the image I am editing in this 'unlocked' mode. 
    Every occasionally I enter Full Screen View and it positions on the left margin *without* superimposition...(!) My great joy is modulated into aggravation, however, should my tracking cursor drift all the way 'out of bounds' -- to call in the hidden pane of adjacent images sequenced in the library... This dramatically shrinks the Full Screen display and re-locks the HUD; if I toggle the switch to re-xpand the image it re-positions at the right margin!!!!  I SOOoooooo wish I knew how to control the default 'locked' margin of the HUD in Full Screen View...

    Drag it over to the Left. Then lock it there.

  • No VM, No Edge/3G, random shut-downs since iOS4 Update after restores

    I have followed all of the fixes I could find and I still do not have a notification that I have a vm, I do not get any internet service via 3G or Edge, and the phone shuts down and cannot be turned back on for for several minutes (happens randomly). This is so frustrating. I now have a phone that has had the iOS 4 reinstalled twice, it has been restored twice, I have a new vm PW, I have a new greeting, I have turned the airplane mode on and off, I have made all sorts of other setting changes per the forum. The only place my phone has data functionality is in my house and that is negligible. But I can't make phone calls in the house because the reception is so poor. Any other brilliant fix ideas from anyone (please help!)? I am so frustrated I could cry. This 3GS is useless to me now and I won;t be able to get a new phone until the next shipments come in. Those seem to be having their own issues too (which apple is blaming the user for or telling them to ride it out).
    Message was edited by: hippieRN

    This fix worked for me - THANK YOU!!!!!
    New! Re: Got Edge and 3G data working in iOS4 - Temp workaround!
    Posted: Jun 25, 2010 11:31 AM in response to: Silvefox
    I have figured out a fix for the Cellular Data, MMS, and VVM not working after upgrading to iOS 4. All of your data will still work with your phone but you will lose your camera roll so please back that up to your computer 1st. Also, initial reports are that this fix does work for iPhone 4 and will restore Face Time functionality.
    Originally Posted Here: http://forums.macrumors.com/showthread.php?t=944733
    "Ok guys, here it is another new fix that covers it all while maintaining your data. (CAUTION: Photos from the camera roll will not work after this method is complete so please back them up to the computer first. I'm not responsible if you lose your pictures.
    This method is based off of dankirsh's SMS Restore method (Only fixes Cellular Data), loveturtle's Non-Corrupted APN Restore method (Only fixes Cellular Data), and my own unique concepts which seem to fix everything and keep data intact minus the photo roll.
    Step 1:
    Windows Users: Navigate to "X:\Users\User Name\AppData\Roaming\Apple Computer\MobileSync\Backup"
    Mac Users: Navigate to "~/Library/Application\ Support/MobileSync/Backup/"
    NOTE: "X:" is the drive you installed Windows on and "User Name" is the name of your account on Windows.
    Step 2:
    Move all Backup files to another location to make sure the entire folder is empty.
    Step 3:
    Plug in your iPhone and perform a full backup.
    Step 4:
    After backup completes, disconnect the iPhone and copy the new folder under the backup directory to a separate location perferably named "Old" for ease of use.
    Step 5:
    After folder completes the copying delete it from the backup directory, NOT THE NEW LOCATION.
    Step 6:
    Plug in your iPhone and perform a full restore.
    Step 7:
    Upon completion of restore if iTunes asks to restore from a backup that you select a new configuration. While configuring the iPhone for new settings uncheck all sync boxes including Applications and Data. <-- (IMPORTANT)
    Step 8:
    Right click the iPhone and backup the iPhone.
    Step 9:
    Upon backup completion copy the new backup folder out of the previously mentioned location and copy it to a folder called "New".
    Step 10:
    Delete the backup that was recently created in the Backup folder.
    Step 11:
    Copy the backup located in the previously created "Old" folder to the Backup folder.
    Step 12:
    Upon completion of the copy go into the randomly named folder and delete a file named "8218978e4ab0a48035bb92653145a6be872ea858", then right click the iPhone in iTunes and select "Restore from Backup" and select "Ok" since this is the only backup in the folder.
    Step 13:
    Upon backup restoration completion let your iPhone sync itself with the computer and restore all of your applications. (At this point all is back to what it was like at the beginning of Step 1.)
    Step 14:
    After all of your Applications are synced navigate into the "New" folder and into the backup folder located inside of it, it will be named as a random string of numbers and letters.
    Step 15:
    Copy and overwrite the following files from the randomly named backup in the "New" folder to the "MobileSync\Backup\Randomly Named Backup" folder; "Manifest.mbdb", "Manifest.mbdx", and "Manifest.plist", they are located near the very bottom if sorted by name.
    Step 16:
    In iTunes right click the iPhone and "Restore Backup" once again since this is the only backup available, click ok.
    Step 17:
    iTunes will display an error and reboot the iPhone, this is normal.
    Step 18:
    Upon boot of the iPhone, check your Cellular Data, MMS, and VVM to verify all is working fine.
    Step 19:
    If all is working, delete any backup located in the "MobileSync" folder and perform a full backup again. As stated before, your camera roll will not work anymore for your old files. The files appear to be present on the iPhone but are corrupt and will be overwritten when a new photo is taken.
    Enjoy your fully functioning iPhone once again and please keep your OLD backup files as I am not sure if the App Data will backup now. I will have to continue more testing with this.
    FINAL NOTE: Resetting network settings did not break my iPhone after completing this method.
    Update #1: Reports from a few users are indicating this method does work for the iPhone 4 and does fix Face Time. See post #68, #69, and #71 for more information."
    Message was edited by: pilot76103

  • IOS4 large Voice Memos won't sync

    Hi,
    I just upgraded my iPhone 3G(s) to iOS 4 yesterday and today I'm having problems with large Voice Memos. I use this heavily in my work with memos over 1 hour in length and never had a problem with syncing with my iTunes 9.2 (61) on my iMac/10.6.4.
    Using iOS4 for the first time today I made 2 long recordings. One appears to have been corrupted on the iPhone (never happened before) and the other won't sync. I was able to pull both off using iPhone Explorer and the second can be added manually to iTunes and it plays fine.
    Is there a bug in iOS4 Voice Memos for 3G(s) in this regard? Any suggestions?
    Thanks.
    Bob

    I have this problem as well on a iPhone 3GS with OS4. Seems that OS4 broke some things. I had a 2 hour recording that wouldn't play on the iPhone. iTunes would sync the recording, but when I tried to play it on the PC, the PC kept saying it was not a recognized format. Short recordings worked just fine, just not long ones. Even ones that were just 15 minutes wouldn't work.
    Try this program for either the MAC or Windows. It works great. Iphone Explorer
    http://www.macroplant.com/iphoneexplorer/
    (taken from a previous post on similiar subject)
    Downloaded and installed iPhone Explorer. Looked in the recording directory on the iPhone and sure enough, there was a MOV version of the recording still on my iPhone that was 2 weeks old. Copied it to my desktop and it plays just fine. Thanks guys for pointing out iPhone Explorer. Also found other MOV versions of recordings in that directory that I thought were gone because they were lengthly recordings. Your right, APPLE needs to fix this issue. At some point, all of the left over MOV versions of the recordings will eventually fill up the data space on the iPhone.

  • IPhone 3GS with iOS4 - voice control does not work any more

    Hi - I updated the OS of my iPhone 3GS to iOS4 and everything went well. But ever since I did the update the voice control comes back with strange results when I try to use it. It was working well enough with OS3. Has anybody the same problems and is there a solution?
    Thanks,
    Klaus

    I'm experiencing basically the same as teardrop3d. I'm Australian (with voice settings on English (Australian)) and my 3Gs had at least 90% accuracy with both calls and music requests.
    On iOS4 I've had a single correct result out of at least 30 attempts at using it.
    Requesting "play playlist <name>" will often either start calling a seemingly random person from my phone book (different each time anyway) or sometimes a seemingly random number (I don't know where the number comes from, it's not in my phone book). Sometimes it'll actually offer to play music, usually a specific artist (not a playlist) and occasionally a playlist (but so far never the right one).
    Requesting "call <name> <number type>" has worked once correctly, but usually just tries to call a seemingly random number from my phone book (or a number I don't know, not in my phonebook...).
    As teardrop3d notes, the voice control screen stays up for about 2-4 seconds after I finish talking. It doesn't seem to be recording during this time, as the waveform stops responding to my voice but the screen sits there (with words moving past in the background still) as if its waiting for me to keep talking.
    I've tried talking in different accents to no avail, and didn't get any better results with a different English language setting on the Voice Control (I'm not sure if that's actually listening for different accents or just responding in a different accent?)
    This feature which I used to use multiple times a day to avoid having to take my phone out of my pocket while walking/riding is now useless. I continue to test it each day to see if it ever works, or if there are any behaviours that change it (e.g. locked vs unlocked or with music playing/not playing when I press/hold the mic-button, etc) but so far haven't found any workarounds.

  • IPhone iOS4 Exchange emails continue to re-download.

    We have several iPhone iOS4 users whose emails download, disappear and re-download. Seems to be a continuous loop. Tried the following solutions:
    1. Delete and re-create Exchange account on iPhone.
    2. Reset Network settings.
    3. Installed network config profile.
    Any ideas?

    Something like this came up a year or more ago and the conclusion was that it was to do with the way Exchange handles users who are barred from the server - a setting in which users are seen by Exchange to be no longer on the authorised access list and so all the company content is deleted. And then it comes back .... but I don;t think anyone found a solution as it was an intermittent issue.

  • I have updated my iphone software from ios4.1 to 5.0.1(9A405) through itunes and i want to find the file which i download but i can`t find it in itunes where can i find it

    I have updated my iphone softwarefrom ios4.1 to 5.0.1(9A405) and i want to jailbreak my iphone to download cydiaafter i do that i download programe named sn0wbreeze2.8b11 but when i startedto jailbrake the programe ask me to drag&drop or browse for ipsw while ialready downloaded but through itunes i try to search on itunes store to get itand drag on this programe but i didn`t found it so, Kindly please tell me howcan i find this file to continue jailbreak my iphone if u have an answer to myproblem please e-mail me at *****[email protected]  or just reply in zis discussion

    See this
    If you can't update or restore your iOS device

Maybe you are looking for

  • Variable in User Decision Description

    I am displaying the 4 variables with their Names & values in the User Decision description. ( Copied the stnd task and played around ). Now if the variable has value then only we need to display its corresponding decription. For this i have done like

  • How do I find my serial number for the product I downloaded?

    How do I find my serial number if the product was downloaded.  I had to re set the operating system and now Adobe is asking for the serial number.

  • How to install iCloud on my Mac Pro.

    I want to install iCloud on my Mac Pro. I updated the software as requested and opened systems preference but I cant seem to find the iCloud icon. How do I add my Mac Pro to my iCloud devices? Thank you in advance for your help... V

  • BI A processing.

    Hi folks, Iam on assignment on implement the BIA indexing for the cubes. i need the fallwing info to work on that. i red the documents avilable, and got some knowledge, but bit cinfusingwhere to start. what changes i have to do in process chain, what

  • No surround sound on DTT2500 with X-FI music card

    Hi, I have new x-fi music soundcard and my old Cambridge Soundworks DTT2500 System. When I set the speakermode of the x-fi to 5.1 speakers it doesn't work correctly. The speaker test for the rear speakers is only audible on the left and right speaker