No 4G enable option
I have the 3rd generation ipad with retina display I live in the UK I use a 3 network sim in my ipad When I go into mobile data and try to enable 4G the 4G option is not there Can you please help
Hello, Dave.
Thank you for visiting Apple Support Communities.
If you are experiencing issues with cellular data connections on your iPad, see the article below.
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Cheers,
Jason H.
Similar Messages
-
RDA enable option in Generic Delta
Hi,
Where do you see RDA enable option in Generic Delta in both the cases R/3 4.7 and ECC6.0? I didn't find the enabling option. Could anyone tell me any settings need to be done before it enables. Whether RDA enables for Generic Delta? If yes what method SAP recommended to use among table/view, FM, or InfoSet Query?
Thanks & Regards,Hi Lathika
to enable RDA option go with WEB Service data sources in the data source-Extraction tab you can see the option Realtime where you can find RDA suppoted
but wen creting the infopackage you need to assign the daemon to that and assign your DTP which loads further targets from that data source also to the same daemon and mention request losing settings in the info package
for example if you mention the request closing time is 1 hour that particular request will be opened for 1 hour the deltas that are posted in that 1 hour will fall in this request
after the request automatically will set to closed
Thank you -
MM02 - Enable options change number, change overview and change documents
I am with the following problem: I enter the transaction MM02, I enter the material 1000765, I select the view "Classification". Later I access the environment option from the menu bar and options for change number, change overwiew and change documents are disabled.
How do I enable these options change number, change overview and change documents?
Regards,
Sérgio SalomãHi Sergio,
If we activate the change documents for classification data, then we will be able to see the CHANGE DOCUMENTS for characteristic values through CL20N transaction (CL20N via menu ENVIRONMENT --> Change Documents) or MM02.
For reference please check SAP Note 65124.
For enabling change documents for classification data in SPRO --> Cross-Application Components --> Classification System --> Classes --> Maintain Object Types and Class Types.
In this enter into MARA table entry. Inside that corresponding to the respective CLASS TYPE (say 001) enable the CHANGE DOCS check box in Classifications part (For enabling this please check SAP Note 65124). Then for this CLASS TYPE (say 001) inside the OBJECTS folder, enable the CHANGE DOCS CLASS checkbox also.
Now in MM02 and in CL20N under menu Environment --> Change Documents you can view all the changes done to that characteristic values.
Once the change documents is activated, then we can get the change documents details in CDHDR and CDPOS tables. The OBJECTCLAS may be "CLASSIFY". We can also use the "CLLA_CHANGE_DOC_CLASSIFICATION" function module to fetch the data from these tables.
Hope this helps in solving your issue.
Thanks and Regards,
Harish kumar. -
Significance of async-enabled option of jms-messaging-bridge
Hi Folks !!
I have a question regarding JMS-MESSAGING-BRIDGES:
What difference will async-enabled = true | false will make to the bridge? Which option will be good from performance point of view ?
Thanks in advance.
Edited by: 994778 on Mar 19, 2013 7:05 AMAs you know, the bridge acts as a receiver from the source destination and a sender to the target destination. When async-enabled is set to true, the bridge works as an asynchronous listener to the source destination, while otherwise it acts as a synchronous receiver. In other words, the former is a push mode and the latter is a poll mode. The sync mode does batching while async mode does not. There are a couple of things that you need to consider while determining which mode is better, such as the desired QOS of the bridge, and whether you are bridging between wls destinations or a WLS destination to/from a 3rd party destination. For example, if you requires exactly-once QOS and your source destination is not a WLS JMS destination, you have to use sync mode; actually the bridge internally will switch to sync mode even if you set it to async mode.
You can find the tuning guide for the messaging bridge at
http://docs.oracle.com/cd/E17904_01/web.1111/e13814/bridgetuning.htm#g1153237
Regards,
Dongbo -
I just installed 2 XFX 8600GT w/ 1GB of mem video cards with bridge. I do not have the option in the NVIDIA CONTROL PANEL to enable SLI; however, it sees both cards. I have updated BIOS and vid card drivers and still can't enable sli.
Any help would be appreciated.
My rig
K9N2 PLATINUM
AMD 920
4GB OCZ
CORSAIR TX650WPull the 2nd card out but leave the 1st or primary card plugged in.
Boot to BIOS and Select Hybrid SLI.
This should then give you the option to set primary video adapter.
Set the Primary Adapter to PCI-E.
Reboot and XP should find the new hardware.
If XP can't find the drivers try the MSI software install disc.
Once the drivers are installed you can power down, install the 2nd video card with bridge.
Once both cards are installed reinstall the latest Nvidia drivers for your video card that Support SLI.
GL -
How do I re-enable option to check for updates in Acrobat 11?
I had this till the time I was using Acrobat 10.xx until couple weeks back - recently purchased a license for version XI and the deployment was streamed to my computer by my company's IT department through Microsoft Software Centre. After the upgrade I don't see the option to check for upgrades under any menu. I have tried a re-install and a repair as well, but to no avail. How can I re-enable the option to check for updates?
Thanks
SatyaThanks so much @LeoAdobeX - that indeed was the problem. I changed it to 1 in registry and see the option in the Help menu now. Thanks again.
Satya -
No speaker enable option on Skype 4.4 for Android ...
Sound only works with the headset/earphone output on Skype 4.4 for Android tabets on the Nook HD+. There is no option to enable speaker sound. Moreover, Nook won't allow reinstallation of v. 3.2.x which did have speaker audio. Thank you for any suggestions.
The best place to get non probblem free Skype for Android device is Google play store. uninstalled the formal app before reinstalling the new one...
-
How to enable option Run - Event profile
Hi,
I want to use option Run -> Event profile, but it's disable. What should I do, to enable it?
I use JDev version: 10.1.3.2.0.4066 on Windows XP.
thxHi,
I found the solution. I change the project properties in Run/Debug configuration. I change the Virtual Machine to ojvm. -
How to enable optional classes
Hello!
I wrote a program with JDK 1.1.8 which uses java.awt.MenuBar. It compiles fine but gives me an UnsupportedOperationException at MenuBar at execution. I learned from the documentation that the menu-components are optional in PersonalJava. My goal is to run the application on Jeode for iPaq which supports the menu-components. How can I notify my PersonalJava-emulator, that I whish to support this components?
Thanks!
RichardInteresting. I am getting my menu's using Sun's Personal Java JVM.
Try on iPAQ itself. -
Hope enable option to change iphone lock sound for next update
It is better to enable for changing the lock sound
your title seem to be advide / request for apple
your post body seems to be a question I don't understand
for the apple request then it would cost millions for apple to monitor these forums to root out spam and tech questions to find feedback from customers so they made a feedback chennel where you can request stuff like being able to change sounds
http://www.apple.com/feedback/iphone.html -
IPod Shuffle "Disk Enabled" option
I have a first generation iPod Shuffle. It has been updated to 1.1.5 which is the latest version for 1st gen Shuffle. This Shuffle has "Disk Enabled". I also am using a Mac. I notice when I "Get Info" on the Shuffle that the Shuffle is formatted as MS-DOS FAT 32. Is this correct? I'm on a Mac. Shouldn't it be formmatted as HFS+?
Thanks!I have a first generation iPod Shuffle. It has been
updated to 1.1.5 which is the latest version for 1st
gen Shuffle. This Shuffle has "Disk Enabled". I also
am using a Mac. I notice when I "Get Info" on the
Shuffle that the Shuffle is formatted as MS-DOS FAT
32. Is this correct?
YES.
I'm on a Mac. Shouldn't it be
formmatted as HFS+?
NO.
Thanks!
You're welcome... -
Cannot enable option to print double sides
When given the printing options in Apple Pages before pressing "print," the option to print 2-sided is set as off and I cannot change the option to print 2-sides.
To be more exact, in Pages, I go to file-print-layout-and the two-sided option is grey and unclickable.
I had to manually print one side and print the other side seperately but I would rather do it all at once.Hi,
Do you see the option to perform manual duplexing but not being prompted to reload the printed sheets or may you do't see any such option anymore?
If you found the option but the device attention light bliks without showing any prompt on your Mac, reload the printed sheets faced down, then open and close the top cartridge access door to resume the 2nd side printing.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Remote Enabled Module option for FI_ITEMS_DISPLAY
Hi,
We need to Enable the Remote Enable option for function module
FI_ITEMS_DISPLAY to access the third party system.
Please suggest wheather we can enable the remote enable option but in
this function module refernce parameters are used.
please suggest.Hi,
purpose of this FM is to display ALV with some data which are passed to this function module and therefore it is meaningless to make this FM remote enabled. It is not clear what exactly is your issue. Can You explain it in more detail?
If you want to get items data from third party system and than to display them in SAP, you do not need to change this FM to remote enabled. You just need to get data from external system before calling this FM for displaying data and pass these data to FM FI_ITEMS_DISPLAY.
If you want do display ALV in third party system, it is not possible.
In general, it is possible to make a customer function module which will be remote enabled and will be used as a "wrapper" and call this FM instead of the original one.
Regards,
Adrian -
Unable to enable option “Mail, Contacts, Calendars, and Tasks with Outlook” under iCloud 3.0 Control Panel.
Get following error when clicking checkbox to enable it under iCloud 3.0 Control Panel.
"Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
Have tried the following:
Uninstalled / reinstalled iCloud 3.0 control panel
Removed all mail accounts from Outlook 2013 except MS account
Confirmed Outlook was chosen for “Always uses this profile” under Control Panel – Mail (MicroSoft Outlook 2013) – show profiles
Still get the same error when trying to enable the option under iCloud 3.0 Control Panel
PC is running Windows 8.1 (64 bit)
Outlook 2013 was just installed on the PC as part of new Office 2013 installationTwo more things:
First, sorry for the bad spelling, grammar, and all of that. English isn't my first language and I'm so frustrated at this point I'm not paying any attention to it. Sorry!
Second, after trying to repair again the icloud 3.0 through the Control Panel of Windows, guess what? It made Offce to crash again! Now I will have to install it again.
=( -
Savage4: DRI installed and enabled, still not working!
My box has Savage4-based ProSavage 8 onboard video hardware, which I am attempting to enable acceleration for. XOrg comes with 2D drivers for this hardware; however, 3D drivers are not included in XOrg or the Arch default kernel (though the kernel is compiled with DRM), so I had to install Mesa. Bingo, there's my 3D driver.
My xorg.conf seems to be configured right (it bloody well should be since I used hwd!)... But still no DRI according to glxinfo, still lame FPS from glxgears (113-144 FPS for normal-sized window), and still bloody hideous FPS from TuxRacer (~2 FPS).
Any help? I'm pretty sure I'm doing this right... Do I need to compile something into the kernel or something?
My xorg.conf:
# Auto-generated by KNOPPIX mkxf86config
Section "ServerLayout"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
### Uncomment if you don't want to default to DDC:
### Uncomment if you don't want to default to DDC:
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 120.0
Identifier "Monitor0"
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
# The following line is auto-generated by KNOPPIX mkxf86config
# BusID "PCI:1:0:0"
Identifier "Card0"
Driver "savage"
VendorName "All"
BoardName "All"
ChipSet "Savage4"
Card "savage Savage4"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group "users"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
What glxinfo says:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x3f 32 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
What glxgears gives me:
622 frames in 5.0 seconds = 124.400 FPS
565 frames in 5.0 seconds = 113.000 FPS
565 frames in 5.0 seconds = 113.000 FPS
678 frames in 5.0 seconds = 135.600 FPS
565 frames in 5.0 seconds = 113.000 FPS
Any help?
Edit: changed "Mode 0660" to back to "0666". Doesn't help a damn thing.
BTW, I'm using the stock Arch kernel (linux-2.6.10-ARCH).Hi guys, it doesn't work here either, even if I followed the instructions (tried March 15th snapshot). Dmesg gives me these errors when trying to load the DRM module:
kobject_register failed for drm (-17)
[<c031f85b>] kobject_register+0x5b/0x70
[<c01397c1>] mod_sysfs_setup+0x51/0xc0
[<c013adb0>] load_module+0xbc0/0xce0
[<c0152add>] vma_link+0xad/0xf0
[<c013af27>] sys_init_module+0x57/0x240
[<c0103279>] sysenter_past_esp+0x52/0x75
savage: disagrees about version of symbol drm_open
savage: Unknown symbol drm_open
savage: disagrees about version of symbol drm_fasync
savage: Unknown symbol drm_fasync
savage: disagrees about version of symbol drm_poll
savage: Unknown symbol drm_poll
savage: Unknown symbol drm_get_resource_len
savage: disagrees about version of symbol drm_core_get_reg_ofs
savage: Unknown symbol drm_core_get_reg_ofs
savage: Unknown symbol drm_get_dev
savage: disagrees about version of symbol drm_ioctl
savage: Unknown symbol drm_ioctl
savage: disagrees about version of symbol drm_exit
savage: Unknown symbol drm_exit
savage: disagrees about version of symbol drm_core_get_map_ofs
savage: Unknown symbol drm_core_get_map_ofs
savage: disagrees about version of symbol drm_init
savage: Unknown symbol drm_init
savage: Unknown symbol drm_get_resource_start
savage: Unknown symbol drm_cleanup_pci
savage: disagrees about version of symbol drm_mmap
savage: Unknown symbol drm_mmap
savage: Unknown symbol drm_initmap
savage: disagrees about version of symbol drm_core_reclaim_buffers
savage: Unknown symbol drm_core_reclaim_buffers
savage: disagrees about version of symbol drm_release
savage: Unknown symbol drm_release
Any ideas?
Maybe you are looking for
-
How to create a simple spot the difference game
Hi everyone. I'm new to the forums and relatively new to flash, so bear with me I'm looking to do a very simple spot the difference game using flash CS3 and actionscript 2 for a school project. As it stands, I have 2 images on separate layers on a ti
-
Can you link a pdf form to a live database (access) (act)
Can Designer create a form that can access a database live to get data and then relay the filled in information back to the database ie job number xxxxx (from database) Client xxxxxxx (from database) time on job xxxxx (input on form and uploaded bac
-
My Iphone was bricked when i woke up one day . It was showing restore screen so i restored it but while restoration it showed (-1) error. Is There any method to resolve this problem.
-
Function modules calling Application server
I am working on a SAP Migration for windows to unix. Right now I am patching up all custom programs which call the Application server using physical filenames and paths (platform specific) and replacing them with logical paths and names (platform ind
-
firefox 3 was working perfectly. with 4.o loaded, the dmg reappears on the desktop everytime, along with the message that it was downloaded from the internet and do I want to open it?