No 5.1 or 7.1 on Fatal1ty Champ

It seems like every single driver I try only likes to output as 2. or headphones. Even when I have all the correct cables plugged in if I change it to 5. or 7. on speaker configuration it works for a split second then reverts back to 2.. Anyone know why it does this?
http://i277.photobucket.com/albums/kk73/calitoxs/Untitled-4.png
Thanks

If anything, the external decoder is your best bet, as it doesn't require drivers/updates/more money
A product to consider is...
http://www.roxio.com/enu/products/toast/titanium/overview.html
As it authors blurays, excellent interface, options with the software, audio editing. Great for creating movies and such.
Does this answer your question?
Ron

Similar Messages

Audio Console/Creative Console Launcher for X-FI Fatal1ty Champi

Hey all, I was just wondering if any of you had the same problem out there. For some reasons all of the sudden, both Audio Console and Creative Console Launcher aren't showing any speaker settings or CMSS-3D at all, as if they were removed from them completely. When i run THX Console it crashes... Is there a way to fix this issue? This is all in Windows Vista 32bit. I'm Using:
P4P800
Pentium 4 2.8 Ghz
2.5 GB of ram
500 GB Sata2 Hard Dri've (Vista installed)
250 GB Sata, 00 GB IDE, & 60 GB IDE Hard Dri'ves (storage)
28 MB ATI Radeon 9800
Creative X-FI Fatalty Champion (similar to Platinum)Message Edited by Unk_chaos on 0-03-200807:55 AM

X-Fi Titanium Fatal1ty Champ series I/O drive

-X-Fi Titanium Fatalty Champ series I/O dri've? Hi guys, new guy here. Hoping someone can help me out because I'm on the verge of throwing myself off the tallest building around here any moment...
I tried emailing for support before but did not receive any response at all.
I recently purchased the X-Fi Titanium Fatalty Champion Series with front panel included for my new computer that I bought. I installed the card and the front I/O panel that came with it, plugged it all in according to the directions and installed the drivers off the cd. However, when plugging my headset to the front X-fi I/O panel, I don't get any sound whatsoever.
Everything is seated as tight as it can and nothing disconnected inside the case. The front panel is lit up as well which means it should be running, and when I turn the volume knob on it, I see its adjusting the volume on the computer itself, so it should be working...but again... I don't hear any sound when plugging my headset (3.5mm Fatalty Gaming Headset) into the headset jacks.
Please help.
My stats are the following:
Motherboard:? Asrock X58 Supercomputer
Ram:? 6GB OCZ OCZ3P333LV3GK 333MHz DDR3-333/PC3-0600
Video:? Sapphire Vapor-X Radeon 4870 (2GB)
OS:? Vista Ultimate x64 SP
Case: Thermaltake Armor+ VH6000BWS
I even tried disabling the Realtek onboard sound and uninstalling its driver, and the front still wont work when I plug my headset in.
So if you can, please help me. I want to get this thing working. Thank you.
Kind Regards,
John
[EDIT] OOPS! Forgot to say that I bought the PCIE version. I think mine only came with two black wires/cords to plug from the card the to X-fi I/O panel.
Message Edited by Yokhanan on 06-24-2009 02:07 [email protected]

Wow and I thought the tech support directly was slow... angry:73.3.99.30

SB Titanium Fatal1ty Champ - Frontpanel does not work correctly

?SB Titanium Fatalty Champ - Frontpanel does not work correctly? good morning,
i use the fatalty with the - champ - frontpanel. Unfortunately this panel does not work correctly. that means is have sound at the headphones and can use the mic but i cannot change the volume (HP and Mic)and cannot change?game mode, cmss-3d and crystalizer.
i?tested this card on two operating systems (one of the totally new) but the frontpanel does not work.
I try the driver from CD, the newest which will be found by creatives autoupdate driver search and i check youp pak but none of them will help.
Internal Soundcard of my mainboard is deactivated.
The hardware is not damaged - i try two different titanium cards with two frontpanels...
here my system:
[color="#0000ff" face="Book Antiqua">MSI DKA790GX Platinum , Cooler Master CM 690
AMD Phenom X4 9950BE @ 3,2GHZ, Logitech Z-4e
4GB Kingston HyperX DIMM 2 GB DDR2-800 Kit
MSI N260GTX-T2D896-OC @707MHZ
Xilence RedWing Gaming Edition Modular - 750 Watt
Creative X-Fi Titanium Fatalty Champion Series
Windows Vista Ultimate 32-Bit; Samsung T260
so...what can i do now? i have no idea what to test now?
brgds
stefan

So nobody actually has any idea what the problem is? I'm not the thread-bumping type, but this is a very annoying issue and if anyone has any useful information I would greatly apprecaite it.

Whats the difference between Fatal1ty and Fatal1ty USB heads

Whats the difference between Fatal1ty and Fatal1ty USB headset? What is the $30 price difference for other than a USB connection?
Also, what is the advantage to using the USB port?
Still trying to decide on which headset to buy. I will be using these mainly for gaming and some music. Although i'm not real picky when it comes to music quality. Even considered the HS-1200 wireless. Which headset of these 3 has the best sound quality and better quality?
Message Edited by iowabucks on 10-20-2008 07:54 AM
Message Edited by iowabucks on 10-20-2008 08:10 AM

Any USB sound related item is going to use system resources instead of the non usb version. The non usb version uses the resources of the sound card and not system resources. So you should get cleaner sound with the non usb version.
But, be aware creatives tech support is not the best in the world. Keep that in mind when buying a product from them.

Can't install recon 3d fatal1ty pro on win 8.1 (stuck at installshield wizard 0%)

Hi, I haven't been able to install the drivers or the panel software for my creative recon 3d, I tried every solution in the forums:
removing video card (as it has audio drivers), disable onboard audio (bios and windows), tried with both disable, and nothing, the setup stays in the installshield wizard at 0%.
I run it from cd, and downloaded several times from the webpage, as an administrator, and nothing.
my setup
i7 4770k water cooled, asrock fatal1ty z87 killer, 16gb ddr3 pc14600 ram, gforce gtx770 GPU, sdd 256gb as main hdd with win 8,.1 64bit,pioneer bd-r206 unit, sata card controller (which i removed while triying to install the recon 3d, 850w psu GOLD.
I also tried deleting the creative temp folder and nothing, it always stays on installshield wizard or as a background process even when closed (after a first run after resetting) please advice.

Originally Posted by juanmiglesias
Hi, I haven't been able to install the drivers or the panel software for my creative recon 3d, I tried every solution in the forums:
removing video card (as it has audio drivers), disable onboard audio (bios and windows), tried with both disable, and nothing, the setup stays in the installshield wizard at 0%.
I run it from cd, and downloaded several times from the webpage, as an administrator, and nothing.
my setup
i7 4770k water cooled, asrock fatal1ty z87 killer, 16gb ddr3 pc14600 ram, gforce gtx770 GPU, sdd 256gb as main hdd with win 8,.1 64bit,pioneer bd-r206 unit, sata card controller (which i removed while triying to install the recon 3d, 850w psu GOLD.
I also tried deleting the creative temp folder and nothing, it always stays on installshield wizard or as a background process even when closed (after a first run after resetting) please advice.
Man I am going to be honest with you, I had the same issue tried everything to fix it. The last resort was doing a clean install of OS, its a pain but if you do it wipe your SSD drive clean make sure of that man. After doing this my sound blaster z worked, I also had the recon 3d and it worked as well after doing this. Hope this helps man.

Fatal1ty headest mk II problems

i finnaly got to get my new headest to work without static in the backround by plugging the headest into the green jack labeled "front" in the back of my computer. i want to change some of the settings in the creative control panel but when ever i open it it says " the audio device supported by this application is not deceted. the application will now exit". it also does this with the console launcher saying " there are no supported audio device avalible. you need to close the application. click OK to close now. can someone please help? i have a X-Fi XtremeGamer Fatal1ty Pro Series sound card.

ok i got the control panel to work by reinstalling the sound drivers. but whenever i change anything in the control panel it has no effect on anything. why couldn't creative just make a usb version? all of these problems probably wouldn't of happened. even the old fatal1ty usb headest is sounding better than this one and i never had problems with it like whatever change i made in the control panel made a difference. i'm thinking about getting my money back.

Problems with mic (fatal1ty gaming headset)

hi,
i used to have a mic but the problem was that i could hear myself, but my computer didnt recognize the mic, so i bought the creative fatal1ty gaming headset but i'm still having the same problem so i think its my computer... i'm using the plug-in in the back cuz the one in front doesnt work...
so if anyone could help me i would be VERY gratefull
grtz, alex

OK now ivé had it with Creative and the crappy products they sell. I´ve been buying ALOT of electronic stuff over the years and all creative products have been a total disaster. mp3 players that breaks down in 6 weeks,YEA ALL 3 of THEM DID!!!, soundcards that dosnt support half of the functions stated in the manual, Crappy drivers that actually gets WORSE when updated, and now a headset with no working mic!!! Cmon a mic is pretty basic stuff but still Creative manage to screw it up. Im breaking my X-Fi soundcard in half and throwing it in the garbage along with my Fatal1ty headset and my creative 5.1 speaker system.

Crackling in Fatal1ty HS-1000, Windows 7

Hi,
I have a crackling in my HS-1000s that will occur if my computer has not been restarted for a while (putting it to sleep does not solve problem, but restarting does). It will sometimes take a few days for the crackling to come back, but it will sometimes come back the next day.
If I do not restart my computer, the crackling will increase in intensity until all audio is output crackly. Then everything will sound high pitched, as if played in fast-forward (voices sound like chipmunks. seriously). Exiting out of the game will usually fix the high-pitch issue, but other sound (youtube, itunes) will still be slighly crackly and stuttery.
Usually a restart fixes this temporarily. I've noticed it occurs more frequently in Battlefield: BC2 than in the past, but it HAS happened in a variety of other games. It seems to only start while I'm playing a game, though. If no sound is being output, there is no crackling.
Additionally, the headset will occassionally hum, on in-game as well. There seems to be no specific on-screen action that suggests humming. Whenever I start up Modern Warfare 2 or BC2, the humming will start at the login menu, then randomly stop.
I am currently using the native drivers.
Thanks
EDIT: It seems that with BC2, when I restart the game, I get no game audio at all. I can still listen to sound on youtube or itunes, but it's still a bit crackly.
EDIT 2: I heard the crackling again and left the game running for a bit then quit out. YouTube was running crackly and then I got myself a nice BSOD. Any suggestions?

Hey man, I'm also experiencing this sh!t...
The crackling just wont stop and it really kills good games, music and movies. :/
I have however come up with a "solution" and that is to un-install ALL drivers and programs for the headsets. The crackling/lagging sure stops but the sound quality goes to hell. The mic volume will also be reaaally low, and that's not really acceptable if you're using VoIP for gaming.
Also found these threads,
http://forums.creative.com/t5/Headphones-Headsets/Fatal1ty-USB-Gaming-Headset-HS-1000-possible-drive...
http://forums.creative.com/t5/Headphones-Headsets/HS-1000-Noise-problem/td-p/537371
WinXP 32bit SP3 ENG
Please Creative fix the f***ing drivers!!!

P35 Platinum stuck with 008D error in boot with newly added OCZ Fatal1ty rams

Hi,
I was using 2x1 GB 800 MHZ OCZ vista performance rams without any problem. I just bought 2x1 OCZ Fatal1ty 1066 MHZ rams. In the specification of my P35 Platinum mainboard it tells that it supports 1066 (OC).
I don't want of course to run all my rams at 1066 MHZ. I just want to run all of them at 800 MHZ.
However, when I placed all 4 rams in every combinotion on the slots, computer boots but it stuck after the boot screen and there is "008D" in the rightdown corner.
Interestingly when I just put Fatality rams (2GB) computer doesn't boot! Only 1xvista perf. Mhz 1xFatal1ty or 1xvista perf. Mhz 1xFatal1ty works but stuck at after the boot screen.
I tried to enter 5-5-5-15 values and tried to adjust memory voltage to 2.1 V as told in the new ram's specification but doesn't affect. What is your solution? Since new rams do not work among themselves, are they broken or my board doesn't support them?

If I'm not wrong, your post sounds to me that you are trying to mix the OCZ Vista and OCZ Fatal1ty RAMs on the same board.
This is highly not recommended as both RAMs are very different in most aspects (Speed, latencies, voltage and made).
I would suggest that you clear CMOS and choose which set you'll want to boot the system with and settle with that.

Windows 7 RC1 not recognising my fatal1ty headset microphone

greetings,
I have got a problem, I recently switched to windows 7 RC1 and now I cannot get the mic to work.
My soundhardware:
x-fi titanium soundcard
fatal1ty gaming headset (not the USB one)
sound output works normal, windows even recognises that my line-in is active BUT I am getting no input from my microphone at all.
Anyone know what this could be? (I am running the newest beta drivers for my soundcard btw)
thanks in advance

Hi Vanilla,
sorry to see that no one has replied to your problem.... I have the same issue here.
I used to have Vista 64bit installed on my Desktop with a Vista that is supposed to be onl;y used for my Dell Laptop......Windows has noticed this and will not let me do updates anymore to my Desktop
So I reinstalled Windows 7 64bit that I had installed a while ago and now I have no mic to use on Teamspeak. My headset (Sennheiser PC350) worked with Vista 64bit. I am just doimng the Auto update from Creative and have also downloaded the beta drivers from Creative for Windows 7. If I have any luck getting my Mic working I will let you know. I would appreciate if you could do the same to me if you get yours working.
Good luck to both of us.....
Cheers

Fatal1ty Pro - Subwoofer outp

Hi to everybody here!
I have a Creative Fatalty Pro, a Yamaha Amplified Subwoofer YST-FSW00, and a pair of amplified desktop speakers Creative HD-50.
I?don't need?a surround system, I need only to use the sub together the speakers.
The first way is to?take one channel from the stereo output and connect it directly to the sub (a really bad solution: only a channel used, and the source signal not crossovered!).
The second way is take the mono crossovered signal (sum of L+R signals) directly from the output jack of the Fatalty.
But obviously, I don't know if this is possible ;(
Can anyone help me please?
Thanks in advice.
Richard aka Minamoto.

OK now ivé had it with Creative and the crappy products they sell. I´ve been buying ALOT of electronic stuff over the years and all creative products have been a total disaster. mp3 players that breaks down in 6 weeks,YEA ALL 3 of THEM DID!!!, soundcards that dosnt support half of the functions stated in the manual, Crappy drivers that actually gets WORSE when updated, and now a headset with no working mic!!! Cmon a mic is pretty basic stuff but still Creative manage to screw it up. Im breaking my X-Fi soundcard in half and throwing it in the garbage along with my Fatal1ty headset and my creative 5.1 speaker system.

Audition 3.0 Sound Blaster Fatal1ty card audio input ASIO issues

I just installed a Sound blaster extreme gamer fatal1ty pro sound card. I've got it working but when I try to open Audition #.0, I get the error about audio input not activated. I can play but I can't record. when I try to, I get a message about the ASIO driver is invalid and change settings in audio hardware. When I go there, the option for input is greyed out. I can record in Audition 1 without any problem so I think I've got the sound card installed properly. Also, I did an upgrade from a Audigy card that worked but had a lot of lag in voice tracking. Any thoughts? Thanks

Download ASIO4ALL, install it and you should be good to go.
Link: http://www.asio4all.com/
Consumer cards like the X-Fi/Audigy series from Creative Labs are not good choices for recording. They're great at gaming (I have an X-Fi on my game machine) and playing movies on your PC but for professional audio applications one needs a professional audio card.

Creative Fatal1ty Pro Soundcard + Fatal1ty Gaming Headset

Doesn't work.
The soundcard is fine, perfect. Crystal clear!
The headset is... fine! Also crystal clear.
The MIC on the headset. Doesn't work..?
I am running Vista Home Prem 32, and i've heard that it is possible to get the mic working, but takes a while. I bought my headset today, spent all day trying to sort out the mic, while i could've been playing the Call of Duty 5 MP PC Beta with my mates, but i couldn't speak to them cause of this.
Is there any fix? I am DESPERATE to get this working. Seriously.
I word from a mod or admin would be nice..
Thanks.

Hi Pottage7,
Are you referring to this Fatal1ty Gaming Headset or the USB one?
If you have not already, please contact Customer Support so that they can help you.

Trouble with my Fatal1ty Gaming Headset

Hello,
i've got a problem with my headset.
After a time i used my headset (around 2 hours) the sound is dull and i have to stick out the headset from my computer to get the normal sound again.
This happens every time (after the around 2 hours).
Product: Fatal1ty USB Gaming Headset HS-1000
OS: Win 7
Can anyone help me ?

I've installed the win 7 beta driver and it doesn't work
After a time around 2 hours i have to stick the headset out and in again beacause of the dull sound.
(please excuse my english

No 5.1 or 7.1 on Fatal1ty Champ

Similar Messages

Maybe you are looking for