No 6.1 channel speakers option with soundblaster x-fi xtreme audio

Here is my problem: I have a 6.1 channel speakers and a yamaha receiver, but my computer doesn't show 6.1 configuration, and neither does the creative software. Both control panel and creative software only have 5.1 and 7.1. When I use my speakers with my dvd player everything works just fine. My soundcard is the soundblast x-fi xtreme audio pci, and I have windows XP. Does anybody know what's going on?

6.1 isn't really a common speaker configuration so I doubt that many sound cards discretely support it. I'm assuming that the only way to get 6.1 audio is from a movie with a Dolby or DTS -encoded track via SPDIF or letting the receiver upmix 5.1 input into the rear mono channel.
How are you connecting the sound card to the receiver? Are you using SPDIF or direct analog connections? If watching DVD movies, I'd recommend SPDIF, provided your DVD software supports it, you should be able to send a 6.1 encoded stream over SPDIF to the receiver, but for everything else I'd recommend the direct 5.1 analog connections, set your sound card to 5.1 and then let the receiver upmix to the rear channel if you so desire to use that feature.

Similar Messages

  • Problem with SoundBlaster X-Fi Xtreme Audio Card Installat

    I just completed installation of my X-Fi Xtreme Audio card for PCI express slot. I followed instructions and cancelled the prompt for audio drivers (by the hardware wizard) and installed via the Creative Labs CD. The installation went well and the card appears to be
    functioning normally. My problem is that whenever I boot up the computer, the hardware wizard keeps discovering my card as new hardware and prompting me for a driver. I have been cancelling each time, but the last time I put in the CD, and had it search for the driver in the Audio/Drivers/driver/WinXP/bin, but it didn't seem to be able to locate the driver to satisfy itself.
    What should I do (besides turning off the hardware wizard) to end this cycle of "new hardware found" episodes every time I boot.
    I hope that someone can help with this.
    ps: I would have liked to speak briefly with a Creative Tech Support person, but they seem to have conveniently left any telephone contact numbers off of their website, so I must depend on your help. Thanks.

    Hi,
    Please check the "Support" folder on your installation CD for Customer Support contact details.

  • Problems with the X-Fi Xtreme Audio Notebook external card..

    I recently updated my drivers for this card on my laptop to find out that updating my drivers meant causing my card to stop working. Before I decided to update through vista (probably a bad idea, but I really was hoping to get my new headset to work with Ventrilo and this seemed like the only route left after working on it for hours), the card was working fine. Music sounded amazing, etc etc. However, upon completion of the downlaod and restarting of my computer, the audio driver just stopped working completely.
    At this point, this is what is going on: <img><span class="Apple-style-span"]http://img75.imageshack.us/my.php?image=helpmeyk3.jpg</img> .
    I've gone to my devices through the control panel and attempted to revert to my old drivers, yet that doesn't work either. Nothing that I do seems to help, so I've just given up until I get someone who actually knows what they are doing. Here's my specs:
    Dell XPS M530 laptop
    Vista ?32-bit
    4gig RAM
    <span class="Apple-style-span">X-Fi Xtreme Audio Notebook
    The headset in question is the Creative Fatality 3.5mm jack.
    If there is anything else I can do, please let me know.
    I just want this to work T_T been at it for around six hours now?

    Here's the text of the e-mail I received:
    <p class="MsoPlainText">Thank you for writing back and letting me assist you further with your concern.
    <p class="MsoPlainText">?
    <p class="MsoPlainText">I understand that you are having difficulties with your X-Fi Xtreme Audio Notebook using with your onboard speakers. I apologize for any inconvenience this may have caused you. I know how something like this can really try your patience. Please allow me to explain this further.
    <p class="MsoPlainText">?
    <p class="MsoPlainText">Please be informed that the sole purpose of your sound blaster is to be used with external speakers and not with the onboard speakers on your laptop. This is also the reason why the effects on the sound card's software have no effect on the onboard speakers.
    <p class="MsoPlainText">?
    <p class="MsoPlainText">Also, you can only control the onboard speakers through the Sound Blaster volume control when the "Enable Audio Playback Through Notebook Speakers" option is enabled in the Entertainment Mode. If this is disabled, you will not be able to control the onboard speakers.
    <p class="MsoPlainText">?
    <p class="MsoPlainText">With regards to the effects (CMSS, Crystalizer, Mixer, and Equalizer), you will need to use an external speaker to enjoy these features. These are not applicable with the onboard speakers.
    <p class="MsoPlainText">?
    <p class="MsoPlainText">Thank you again for visiting Creative Customer Support Services. I hope the information provided was helpful. If you still require assistance, please reply to this email with any previous correspondence to ensure the quickest and most accurate service.

  • Soundblaster X-fi Xtreme Audio and ALch

    I bought a Soundblaster X-fi Xtreme Audio soundcard to go with my new computer as I have always used Creative and have been impressed by them. However, in Vista, my rear speakers do not seem to work. I did some research and found that ALchemy was what I needed, but I cannot get this to install. It gives me the error message that my card isnt supported. Is there any workaround for this? I feel pretty miffed having an X-Fi card and being excluded from proper sound in Vista.

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Creative soundblaster x-fi xtreme audio PROB

    Hello!
    Ive just bought a ceati've soundblaster x-fi xtreme audio some days ago but it dosent work properly.
    I bought a ( http://www.clasohlson.se/Product/Product.aspx?id=383530 ) becouse i wanted to connect my PC to my reci'ver but i cant choose Spdif in the console launcer.
    -It just says unknown or no signal in the Digital I/O menu.
    What am i doing wrong?
    Help!

    The Digital I/O jack on the Xtreme Audio soundcard isn't an optical out jack so you can't use an optical cable directly with the card. If your receiver has coaxial jack, you can get a 3.5mm minijack to coaxial cable to work with the soundcard.
    JasonMessage Edited by Jason-CL on 04-08-2007 02:6 AM

  • Soundblaster X-fi xtreme audio icon used for equalizer.

    I have bout the sound blaster x-fi xtreme audio soundcard and the software is installed but there is no icon in the taskar and i cannot find the graphic equalizer. I am using vista, is this the problem?

    ;Re: Soundblaster X-fi xtreme audio icon used for equalizer.O .Go to the Start Menu on the Windows Desktop
    2.now look for the Creative Sound Blaster X-Fi Folder
    3.look for the Creative Volume Panel and click it on
    4.after you click it on , it should appear in your task tray
    5.form your task tray click on the icon, that will open it up the Enterainment Mode
    6.form there all of your controls are there, like, EQ. Bass, X-FI CMSS, EAX, X-FI Crystarlizer, Mixer, Speakers, imput, output
    Message Edited by denb45 on 0-04-2009 0:28 [email protected]

  • SoundBlaster X-Fi Xtreme Audio PCI-Express and XFX 9800GT graphics c

    Hi
    I have just bought a SoundBlaster X-Fi Xtreme Audio PCI-Express card and looked at the motherboard where I have a XFX 9800GT graphics card installed and noticed the PCI-E slot where it attatches to the motherboard is right next to the graphics card and I am concerned it may cause air flow ventilation problems for the fan on the graphics card. The gap is about 2 mm.
    .Does anyone think think this may cause the graphics card problems?
    2. Is there an adapter/extention?lead that can be?connected to the PCI-E slot so I can attatch?the X-Fi Extreme card so I can move it away from the graphics card ?
    Any ideas on this much appreciated.
    Mack

    The only way your going to know the answer to is by measuring the cards tempds before and after installing the sound card.
    Graphic cards run with certain temp limits, and I guess there must be one for yours.
    No idea on 2...all google throws up is "PCI Express to PCI Adapter".

  • SoundBlaster X-FI Xtreme Audio: short freeze / dropouts

    hi,
    my problem is:
    from time to time my audio playback stops and whatever's coming out of my speakers at that point stopps for half a second or so and then continues as it should. video output and key/mouse input freezes while this happens.
    it happens during regular working and in games.
    it's annoying and I don't know what causes this problem. so I don't know how to fix it.
    specs:
    Soundblaster X-FI Xtreme Audio PCI? driver version 5.2..62
    Windows XP SP3 and latest fixes
    Core2Quad Q6600
    3 GB DDR2-RAM
    GA EP-35 DS3
    GeForce 8800GT PCIe
    TP Link WiFi PCI
    anything that might help would be nice!

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Microphone problems With Soundblaster X-Fi xtreme gam

    As the Commenct says i got problems with my microphone, When i installed the newest drivers it just stopt working after a while, first it workt but after like 2-3 days it stopt working i wounder what i can be if you have some ide? about what i can be please tell me.

    yee i have checkt it didn't work my microphone is new and have test it on another computer it works fine think i got some bug with my new drivers do you or someone who reads this now where i can download the drivers before this newest update for soundblaster X-fi xtreme gamers?Message Edited by Sammen on 06-6-200708:07 AM

  • Soundblaster X-FI Xtreme Audio rear speakers won't wo

    have an XP PS2 64 and the driver is ?5.2..68 dated 5/8/2007
    front L+R and Center work.... the rear speakers just have a faint humm or buzz
    when i did the?driver update it installed this 5.2..620 dated 9/25/2007
    this update made it terrible, no center sound and the 2 front were scratchy,skippy,crackly....still no rear speakers...settings don't do anything
    found this update Creative Sound Blaster X-Fi Xtreme Audio Pack .04.0078 (40.7 MB) [color="#222222">4 Oct 07
    [color="#222222">it wouldn't let me install this update, said a more update driver is already installed
    [color="#222222">after the st install and update i couldn't get the rear speakers to work.....system volume,conf,xfi controls panel etc....nothing worked
    [color="#222222">can someone tell me which driver will get the surround sound to at least work
    [color="#222222">my eyes are starting to bleed from all the reading........follow a thread only to find 5min later that it didn't work or the results weren't posted
    [color="#222222">disappointed with the lack of support from creative,the?video card i installed took 5min and the sound card has 5hrs of reading with no end in site
    [color="#222222">help please,point me in the right direction or a link that would solve my problem

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Help Needed With Creative X-Fi Xtreme Audio 7.1 Soundcard -

    Hi All,
    I need some help I have just installed the Creative X-Fi Xtreme Audio 7. Soundcard - OEM from overclockers uk - http://www.overclockers.co.uk/showproduct.php?prodid=SC-049-CL
    My problem is this my machine is constantly sounding the 'Device Connected' and 'Device Disconnedted' Windows Sound, But there are no new devices my system was working perfectly fine until after installing the card.
    My Mobo Is Abit AI7 with BIOS 9, Onboard sound disabled, VGA BIOS Cachable dis abled and there is not over clocking running.
    I have removed my Dual DVB-T Tunner replaced it with a different one, moved the 2 PCI card around different slots and still that bloomin sound.
    Its got to the point now I have turned my speakers OFF
    Anyone got an answer?
    TIA
    Andy

    You know it helps to post solutions if it's working fine for you. Moreover, unless you have the same hardware as someone else what works for you won't necessarily work for them.
    That said, @ the OP have you tried setting the mic as default under the Sound settings? (Type Sound in the search bar and click on the "Sound" entry to find it.)
    Also this may help
    [Edit I wish these solutions were stickied or in an FAQ somewhere, activating/problems with the mic seem to come up quite a lot. Oh and I dunno if this will help too but when I had garbled mic issues on my X-Fi a complete uninstall and clean down with Driver cleaner seemed to fix it.]
    Gift.Message Edited by Giftmacher on 06-07-200703:25 PM
    Message Edited by Giftmacher on 06-07-200703:28 PM

  • SoundBlaster X-Fi Xtreme Audio Notebook connections to speake

    Was wondering if anyone out there could tell me something? i have the creative S750 Gigaworks 7. surround sound speakers. i have just purchased the X-Fi Xtreme audio notebook card with the surround sound connection piece. on my sub there are four ports: Green, orange, white and black. Now on the other end of that very same cable there are only three, the typical Black, Green and Orange that i have used on my desktop for my 7. surround sound needs. My question is, where do i get this cable with both ends having all four colors to connect into my external speakers dock? if anyone can help me on this I would be greatly appreciati've. Thanks.........

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Do SoundBlaster X-Fi Xtreme Audio support O2ja

    The sound will be weird when playing some songs. Etc song :Identity Part 2 Hard
    Operating system : Windows XP Pro SP2
    Speaker : Altec Lansing Vs42
    Motherboard : Asus P4V800-X
    Soundblaster Driver : .4.78
    P.S : o2jam is a music game, more information visit www.o2jam.com.my
    Message Edited by frey88 on 03-07-2008 04:24 AMMessage Edited by frey88 on 03-07-2008 04:25 AM

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Installation Problem with SB X-Fi Xtreme Audio P

    Hello,
    I bought a X-Fi Xtreme Audio PCIe yesterday and I can't install this card on my WinXP 32bit.
    My Board is an Asus A8N-E with a nforce4 ultra chipset.
    Windows detects a "pci device" at startup.
    In the hardware manager there is a "pci device" listed with a black exclamation mark on yellow ground.
    But I can't install the driver correctly. The driver always says that "no supported hardware" is found.
    I have tried out the driver on the CD and many drivers from the internet.
    Does anybody know a solution?
    Thanks in advantage!

    I see several issues here:?. It's an AMD system.2. Aside from my bias towards preferring Intel systems, the actual issue is related to the ESCD system. In modern day boards, you have a system called Extended System Configuration Data that holds the information from the Plug and Play Identifier that is read from a card when it is plugged into a board. This is what triggers the New Hardware Found information. If this identifier can't be decoded correctly, the .inf file with the PnP coding in it can't identify the card, and the drivers will not load, and with the NT kernal system, they can't be forcibly installed very well either, and in most cases, the board won't initialize correctly anyway. Possible Resolutions:?. Try updating the motherboards BIOS if you haven't done this already. According to Asus, the latest (and most likely final) edition is 03. They have a Windows installer which can update the BIOS, but you need to make sure ALL background programs, Anti-Virus, ect. are closed down to prevent a corruption of the BIOS update.
    PLEASE USE CAUTION UPDATING YOUR BIOS AS IT WILL RENDER YOUR BOARD INOPERABLE
    !!! 2. Remove all other cards if any, and be sure the onboard sound is disabled. You may simply have something preoccupying the memory addresses the card wants to use.
    3. Be sure to go into the BIOS and Enable Reset Configuration Data. This will clear the ESCD. Once cleared it will redetect the board, and unless there is a problem on the board's PnP side, it should pick it up. 4. One big possibility is the RAM and/or the CPU. While it is rare the CPU causes this issue, it unfortunately is not unheard of. However, bad RAM is not unheard of, and will usually manifest itself with the computer also having unusual problems like locking up unexpectantly, poor DVD playback (excessi've artifacts, pausing, ect.), and the famed BSOD or spontaneous reboots. It is also noted that the nForce 4 chipset and the Sound Blaster cards have known compatibility issues. I also have a small issue as it is with my nForce 680i chipset and the Sound Blaster Audigy 2 Platinum. This is also a known problem, and it will not be resolved. The card works, but just has problems when running the Test in 5. and 7. modes. It is my overall guess it is simply a BIOS issue, and if you update the BIOS and the problems continue, then you will want to send the card back for a replacement. If the replacement has the same issue, I'd replace the motherboard. I hope this hel
    ps.
    and Good Luck.

  • Optical Output surround problem with SB X'FI Xtreme Audio Notebook (Gray one)

    Dear All and Creative Gurus,
    I search through the forum and read all sticky thread and didn't find an answer, so I need to post here:
    I just bought this ExpressCard sound card for my laptop, and nearly all work fine. I know pretty well Creative tools and settings for years as I already have an XtremeGamer PCI card for my desktop PC.
    I meet an Optical Output issue with this new Notebook card:
    When I use any software to play DTS or Dolby Digital signal from video or music (E.g. a DVD with PowerDVD or VLC), the Optical Output only send "basic" st?r?o, and my amplifier can't detect any surround. Surround is OK when I use the little dock with the 7. analog output.
    As a comparison, with the other computer, and the X'FI XtremeGamer sound card, and using same settings, same sources and same software (VLC or PowerDVD set to spdif output) the Optical Output send surround sound, and my amplifier detect Dolby or DTS source.
    So I hope it's just a drivers (updated I think) or settings problem, and I hope this optical output is not made only for st?r?o sound!
    Let me know your feelings here Guys, thanks! And keep the good work
    Best regards,
    Loran_69
    Edit few minuts after : All work fine if I use the "Creative MediaSource 5 Player" !
    The optical Output send surround and my amplifier well detect the Dolby or DTS source!
    So what's going on with other software like VLC or PowerDVD, with the same settings than my desktop computer (spdif enabled)?

    Seeing as the desktop version of the Xtreme Audio doesn't support Game Mode or even have the X-Fi chip on it (card is basically nothing more than a renamed SB Li've 24 bit/Audigy SE), I don't see how the notebook version can be any different. That and from looking at the specs for it I don't see anywhere that it even mentions anything about Game Mode, never mind EAX.

Maybe you are looking for