No 64-bit install option

Hello. I'm attempting to practice install Arch on VirtualBox before installing it on my desktop. However, when I run the install iso, I only get the option to boot i686, and when I check for the flag that indicates that the system is 64 bit, it isn't there. I should mention my Windows 7 install, which is my base system, is 64 bit, and I have installed 64 bit operating systems as VMs before on this operating system. I have a 64 bit CentOS right now.
What can I do to get a 64 bit installation on VirtualBox? I want my install on my desktop to be 64 bit.

I made this mistake not too long ago in VirtualBox. When creating your virtual machine you are asked to choose an OS from a drop-down list. If you want a 64-bit system, you must be sure to select the 64-bit version. For example, choose "Windows 64-bit" instead of just "Windows". Otherwise you will end up with a 32-bit virtual machine. This may not apply to you, but it stumped me for a while and I felt really stupid when I went back and found that I forgot to select the 64-bit version of the OS I wanted. Hope that helps.

Similar Messages

Is there a 64 bit install for Adobe Reader?

Hello,
I want to make a note that I did a search on the form, using the following text
"Is there a 64 bit install for adobe reader?"
And I did not find my answer. That is why I'm posting this as a question.
So, with that out of the way....
I am getting ready to build a new computer for myself, and will be running Windows 7 Enterprise 64 bit. Before I begin, I want to make sure I have all of my software that I want installed, and I am doing research on each program to see if there is a 64 bit version that can be installed. What I would like to do is have as many as my programs that I install be 64 bit as possible. I know that not every program will be 64 bit, but I did want to get as many of them as possible to be 64 bit applications.
As I do want a PDF reader on my computer, and I have used Adobe Reader for years, I started looking on the web site to download the current version. However, I did not see any place that I could download a 64 bit version of Adobe Reader.
That is why I'm here asking. Is there a 64 bit version of Adobe Reader that I can download? If so, where is it on the web site?
This does lead me to a follow up question. Is there a 64 bit version of the Flash Player, as well as the Shockwave player? If so, where can I download them from as well.
Thanks in advance,
--Brian Plencner
[signature deleted by host]

Again, I think you need to check the Microsoft web page, as I was able to find 64 bit versions of IE8 for download.
The URL to access the page is
http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8
From that page, I am able to select a 64 bit version of IE 8 for the following Operating Systems
-- Windows XP 64 Bit
-- Windows Vista 64 Bit
-- Windows Server 2003 64 Bit
-- Windows Server 2008 64 Bit
Windows 7 is not listed as an option as it already comes with IE8 installed by default.
Looks to me that Microsoft has already released a 64 bit version of IE8.
In fact, I went ahead and downloaded IE8 for Windows 2003 Server x64 bit, and looked at the details of the file. Each microsoft download has a digital signature associated with them, showing a date and time of when the exe was built.
According to what is shown below, IE8 for Windows Server 2003 has been around since Sunday, March 08, 2009.
So, what has adobe been doing since March of 2009? IE8 has been 64 bit for well over 2 years now (it will be 3 in March of 2012). While I know that it does take time to develop new applications, I don't think it would take 3 years for Adobe to come up with a 64 bit version of Reader that could have been built under the 64 bit platform.
--Brian

C5100 all in one install option missing

I am running Windows 8, 32 bit.
So the printer has been buggy and I decided to uninstall and re-install it. As I was uninstalling it I was also downloading some files. After I reinstalled the c5100 all in one package from the website I ran the installation. However, it said I did not have enough memory to complete the installation. It suggested to delete some files and then eject and close the cd drive again. Well that option was not really there because this was an online download. I was not sure what to do, so I rebooted the computer. Apparently that was a mistake.
After I made plenty of room on the hard drive I tried re-running the installation. Now, however, when the installation window comes up it says "Select Install to begin installing your new HP device." But that option is not there. In fact the only option is to exit.
I have deleted all temp files related to the download of the driver package and re-downloaded it, but I get the same problem. I have also uninstalled all HP software on the computer, but still nothing. I don't really know what else I can do. Any help?
Thanks.
This question was solved.
View Solution.

Well, this time when I extracted the second 7z file it automatically brought up the installation window and the Install option was there. I have no idea why it worked this time and not the others, but I did not have to access the Util folder or anything else. Thanks for your help!
EDIT: So it turns out that I spoke to soon about the install option working that time. While it was installing an error window said there was a missing file. So I finished your instructions and THIS time it seems to be installing correctly. Thanks again!

Legitimate newly purchased Premiere Elements-10 32-bit install files not available

Friends:
I purchased an $1100 Nikon camera and the deal included OEM PS Premiere Elements 10.
Legit purchase with a CD and legit Serial #.
Can't install because what is Adobe's fault, not the camera vendor's and certainly not mine.
Adobe's own published notice:
"The 64-bit version of Adobe Premiere Elements 10 only installs on Windows 7 64 bit. If you have Windows XP 64 bit or Vista 64 bit, it's necessary to install the 32-bit version. Because the Adobe Download Assistant automatically downloads the 64-bit version in error, it's necessary to download the 32-bit version manually through alternate means."
The problem is that the same holds true for installing on XP Pro SP3 and Adobe makes no mention of it in the above admission.
Then, Adobe's own Solutions 1, 2 & 3 for manual download all fail, even after fussing for days over it.
Even Solution 3, the last ditch option, fails perhaps because Elements 11 is out and Adobe has killed the 10 download Ftp sites.
Files I am unable to download from Adobe (without entrapment by so called Free Dowload sites) are:
http://trials2.adobe.com/AdobeProducts/PRE/10/win32/PremiereElements_10_LS15_win32.exe
http://trials2.adobe.com/AdobeProducts/PRE/10/win32/PremiereElements_10_LS15_win32.7z
How can I solve my dilemma, being denied my right to learn Elements from a legally purchased 10 and being
forced to purchase 11 instead on top it. Fair?
I am requesting Adobe politely to make it possible to download the Adobe recommended two files withou hassles.
I must mention in this context my own (and thousands of others') sad experience with Flash updates. Just follow
my own (and others') posts in Adobe forums. Plus, just read the Internet posts along these lines:
"It's impossible to download anything from Adobe. I have given up and I have given up on Adobe products."
Not that I want to, but I am forced into echoing the same sentiment.
Can anyone help, please ?
Thanks,
Pradip A.

Hello Mr. Wright:
The download now works. Appreciate your help.
The ...7z file is 1.37 Gb long. I have super high speed Fibre Optic Internet connection with Bell. I rarely have the ocassion to download files of this size. After downloading more than 1 Gb, the transfer hung - either at the Client end, or at the Server end. Bell is sending tech Thursday to mitigate some line noise they detected. Hopefully, the stars will fall into the right place before long.
Regards,
Pradip Acharya
Date: Tue, 13 Nov 2012 11:54:11 -0700
From: [email protected]
To: [email protected]
Subject: Legitimate newly purchased Premiere Elements-10 32-bit install files not available
Re: Legitimate newly purchased Premiere Elements-10 32-bit install files not available created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
You can find the 32-bit installer at http://prodesigntools.com/photoshop-elements-10-direct-download-links- pse-premiere-pre.html. Please make sure to complete the Very Important Instructions section prior to clicking on the link to download the file.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4844309#4844309
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4844309#4844309
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4844309#4844309. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Check installed options in text mode.

How can I check installed options (of the RDBMS) in an only text environment (no GUI)?

Connect to the database using Sql*Plus.
From a privileged account, enter the following sql statement.
Select * from v$option;

After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

What version of iPhoto do you have?
iPhoto Upgrade under Mavericks see post by Old Toad

What query should I use to find all versions of Office 2013 64-bit installed on client computers?

What query should I use to find all versions of Office 2013 64-bit installed on client computers? Could someone create a custom query? I need all of the client computers names and which ones have any Office 64-bit components. Thank you so much! I really
appreciate it!

Hi,
You could edit the following query to meet your requirement.
SELECT     dbo.v_R_System.Name0, dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System],
                      dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [OS Service Pack], arp.DisplayName0,
                      CASE WHEN arp.version0 LIKE '11.0.6361.0' THEN 'SP1' WHEN arp.version0 LIKE '11.0.7969.0' THEN 'SP2' WHEN arp.version0 LIKE '11.0.8173.0'
THEN 'SP3' WHEN
                       arp.version0 LIKE '12.0.6215.1000' THEN 'SP1' WHEN arp.version0 LIKE '12.0.6425.1000' THEN 'SP2' WHEN arp.version0 LIKE '14.0.6029.1000'
THEN 'SP1' ELSE '' END
                       AS 'Service Pack', arp.Version0
FROM         dbo.v_Add_Remove_Programs AS arp INNER JOIN
                      dbo.v_R_System ON arp.ResourceID = dbo.v_R_System.ResourceID INNER JOIN
                      dbo.v_RA_System_SMSInstalledSites AS ASSG ON dbo.v_R_System.ResourceID = ASSG.ResourceID INNER JOIN
                      dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID
WHERE     (arp.DisplayName0 LIKE '%Microsoft Office%edition%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2010%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office 2000%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office XP%') AND (arp.DisplayName0 NOT LIKE '%update%') AND
                      (arp.DisplayName0 NOT LIKE '%Microsoft Office XP Web Components') AND (dbo.v_R_System.Operating_System_Name_and0 NOT LIKE '%server%')
AND
                      (arp.InstallDate0 NOT LIKE 'NULL')
ORDER BY dbo.v_R_System.Name0, arp.DisplayName0, arp.Version0
Full details:http://social.technet.microsoft.com/Forums/systemcenter/en-US/7baeb348-fb63-4115-8d76-2c884d18f708/sql-query-to-check-ms-office-service-pack-level?forum=configmgrreporting
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Blue screen appears & Information about Archive & Install option.

Hey, i am using Mac 10.5.8
Yesterday it was working perfectly fine.
But after dinner when i tried to open, it dont go beyond blue screen
I have tried disk utility using original MAC OS X DVD, while verifying it says disk appears to be ok, but its says some alterations in disk pernission, i have clicked on repaire disk permission, and after that tried to start, but still it stuck at that blue screen.
Its getting that grey apple screen, then further going to that blue scren, but dont go beyond that.
Now i want to know if anyone have solution to this problem. Please help me
Also want to know, if i go for "Archive & Install " option, will that keep my data or erase my data. As i have arround 2-4 GB important data.
Please respond to this as soon as possible, i need it to be fixed urgently.
Thanks in advance.

Once the system is up and running, you should keep a back up of very important data.
You can burn a DVD.
That is why i am asking, will archieve and install keep my data safe?? All my documents and all??
Normally data should be safe after Archive and Install.
That is my experience. But there is no guarantee.
Best.

OBIEE 11g 64-bit install on Windows 64-bit

I wanted to solicit any experiences that the user forum is having with installing 11g on a 64-bit Windows platform. I understand that the Admintool/Job Manager will not run with the 64-bit installation package but we can install the newly released Client install to circumvent this. I am seeing many forums out there in which the 64-bit OBIEE install is done as Simple or Enterprise. My understanding is that this is useless as the bundled WebLogic utilizes at 32-bit JVM. There is a Doc ID out on Metalink (ID 1220564.1) that states one can only do a Software Install. So we have proceeded with the following steps of downloading first the Java 64-bit JVM, then a WebLogic instance utilizing the 64-bit JVM (java -D64 -jar xxx.jar) and finally the OBIEE Software Only install.
The issue we are running into is that the Install fails when attempting to start the OPMN. So during the install the "Executing:opmnctl start coreapplication_obips1
" fails and references the OPMN not starting. We are unable to start the OPMN service as well. We have a static IP, so this not the known issue with the loopback adapter. The other issue I saw was having to install the VC++ 2005 SP1 libraries per another Metalink Doc ID (1226254.1). This was all done, however, the install continues to fail.
It seems the lack of knowledge from support as well as the vague/lack of documentation is frustrating. I just wanted to ping the OTN community around this scenario.

Thanks Paul, really appreciate the update. Spent this morning rebuilding our environment with 64-bit (Win 2008) and starting from scratch. The install has now succeeded. I tell you one thing you pointed out is something we noticed when we proceeded with the second install. That was the WebLogic version. I had initially used .4 and on the second install we used .3. I am guessing that this may have been the issue.
I will verify with our Oracle resources and I hope this post will assist other when doing the 64-bit install as I think it is very vague in the documentation.
I will update the post with Oracles response as well.
Just as an FYI... the reason this issue came up in the first place was we did an Enteprise Install on 64-bit and found that the Gauge Charts weren't working in the SampleAppLite Subject Area. So I will add that to the Tags for this post.
Hope this post helps others and they don't go through the headaches of a wrong install type.

Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
Thx

I've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence?

How do I get administrative priveleges to install optional plug-ins for cs5

how do I get administrative priveleges to install optional plug-ins for cs5 and or how to install these optional plugins thanks

To add to Mylenium's reply, here's how to do it on Windows and this is what microsoft website says:
Why do I have to be an administrator to install a program?
Only administrators can make changes that will affect everyone who uses the computer, such as installing software and hardware and changing security settings.
If the program you are trying to install or run says you must have administrator rights, but you are already an administrator on the computer, right-click the installation icon for the program, and then click Run as administrator. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
If the program installs but does not run, right-click the program icon, click Properties, click the Compatibility tab, select the Run this program as an administrator check box, and then try to run the program.

Grub install option in Solaris Express 11

I am tryin to install OracleSolaris 11 express 201011 from live cd,but found some critical options missing(which are there in other linux/opensolaris distros)
*Advanced Grub install option( whether to mbr or to the particular solaris install parition)
Since i have a mutiboot of --
Vista(the primary boot loader)(soon be upgrading to win7)
|
|---Neogrub (chainloads)
|
|--Ubuntu,Kubuntu,fedora,(solaris 11 ???)
can i achieve this configuration ?will solaris 11 grub remove the vista boot loader from mbr?
Thanks in advance

I am tryin to install OracleSolaris 11 express 201011 from live cd,but found some critical options missing(which are there in other linux/opensolaris distros)
*Advanced Grub install option( whether to mbr or to the particular solaris install parition)There isn't an option for this with OpenSolaris or Solaris 11 Express. It just overwrites the MBR without asking.
Since i have a mutiboot of --
Vista(the primary boot loader)(soon be upgrading to win7)An entry should be created for you by default.
|---Neogrub (chainloads)No idea.
|--Ubuntu,Kubuntu,fedora,(solaris 11 ???)In order to boot any of the Linux Operating Systems it's boot partition has to be extfs2 otherwise the GRUB that comes with OpenSolaris will not understand it. I learned that one the hard way trying to figure out why it couldn't read an extfs4 partition. It can't.
can i achieve this configuration ?will solaris 11 grub remove the vista boot loader from mbr?yep.
alan

I cannot update software on my iPhone. I am missing the Download and Install option. Could someone please help?

Please help. I cannot update the software on my iPhone c.
I go onto software update but the Download and Install options is not there.
I have tried deleting apps to make space so this doesn't appear to be the issue.

iOS 8.1.3 is the latest version. There's nothing to download.

I have a Mac os x 10.7.4 which has Java 32 and 64 bit installed. Am unable to deposit to bank online getting a message stating I need Java 32 bit for Mac, confused???

I just got a MAC OS X 10.7.4 which has Java 32 and 64 bit installed. Am unable to make deposits on line. I get a msg stating it appears I am using 64 bit java and I need 32 bit java for MAC. I have changed order of java in preferences but it does not make a difference. Suggestions?

MadMAC0 posted at https://discussions.apple.com/message/20107182?ac_cid=tw123456#20107182 that:
Apple has posted (10/22/12) the approved solution for restoring the Java 6 plug-in:
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality.

Wraptor DCP and missing Maximum Bit Depth option

DCPs are made from 12bit JPEG200 frame files wrapped is a MFX container. But there is no Maximum Bit Depth option in Wraptor DCP codec for AME8.
Does it means:
1. Wraptor DCP has by default Maximum Bit Depth checked on, so it correctly produces high depth color renders?
2. OR, Wraptor DCP ignores AME Maximum Bit Depth, so it always renders in 8 bits and than scale up to 12bits (what is a waste of information)?
The following article implies that option 2 is the correct case, what would be a shame for a such quality demand workflow as DCP production.
The Video Road – Understanding Color Processing: 8-bit, 10-bit, 32-bit, and more

Wraptor DCP output is not working for me on a feature length film. Am I missing something?
Symptom: simply hangs at various stages of the job. No message, never crashes... just STOPS on one frame and never resumes.
Hardware:
OSX 10.9.2 on MacPro late 2013
Going to try it with an older machine. Any suggestions?

No 64-bit install option

Similar Messages

Maybe you are looking for