No access to Enterprise Services via Visual Composer

Hi,
I've configured the new landscape of EsWorkplace (HU2/800) in the Visual Administrator.
After I start the Visual Composer and log in I get the list of Enterprise services normally, but when I click on the Enteprise Service to get the Data service to model in the story board, nothing happens and I can't get the Data service.
Can anybody help in this issue?

Hi Ghosh,
I had used fine the EsWorkplace environment until the update of the landscape, when the system id was FU2. I used the Enterprises Services directly in Visual Composer and used in the NetWeaver Developer Studio by CAF Services too.
When SAP changed the landscape (system id HU2) I received another password for my userid.
I changed my WebService Security in the Visual Administrator and when I started the test, I see that I don't get to use the Enterprise Services directly in the Visual Composer.
The applications that I created in the Developer Studio still work fine, but When I select the button "Find Data", select the HU2 system , and select the search button the result is showed at the screen , but when I click on the Enterprise Service nothing happens, and I can't get the Service for model at the Story board.
thanks,
Márcio

Similar Messages

Unable to consume Enterprise services from Visual Composer

Hi,
We have implemented ECC-SE 603 add-on in our ECC 6.0 system.
We configured to set up a connection between our J2EE engine and the ES Workplace, to consume the Enterprise services from Visual Composer.
But, we are unable to see the Enterprise Services in the Visual Composer.
Kindly, let us know how to resolve this issue.

Hi,
please refer the following link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a160392c-0e01-0010-7784-9cc564d871d2
Regards
Manohar

Enterprise service in Visual Composer

When i click on Search Task Panel toolbar and select service registry as the search criterion,I get a pop up stating...
unable to receive classifications from UDDI registry,Please change UDDI server settings.
Have ne one of u come across a similar situation??
solution??

Did you correctly define the services registry in NetWeaver Administrator?
If you correctly configure the services registry and a physical destination for the services registry in NetWeaver Administrator, then you should be able to access it from within Visual Composer.
You can follow the instructions here for the physical destination: http://help.sap.com/saphelp_nwce10/helpdata/en/45/635dd614d73bdbe10000000a1553f7/frameset.htm
And the instructions here for the services registry: http://help.sap.com/saphelp_nwce10/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm

Reading terms and conditions page 3 of new account for iTunes Store before I put in US$ voucher purchased in Zimbabwe. If I'm traveling world wide, willI still be able to access the US services via this same account?

Reading terms and conditions page 3 of new account for iTunes Store before I put in US$ voucher purchased in Zimbabwe. If I'm traveling world wide, willI I still be able to access the US services via this same account?

You can only use the US store if you are in the US with a US billing address on your account - the US store's terms of use (and they will be similar for all countries) :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

Stored Procedure For Web Service in Visual Composer 7.1

Hello,
I want to use stored procedure for Webservice in Visual Composer 7.1
I can find this Web service but not supported. ( ex) prcreleased_test - Not supported )
Log.
Message: Error in connection - Can' t execute Web service.
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.processExecution:
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb
Log2
Message: Stopped further execution since the interpreter is unusable
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.XGLInterpreter
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb '
Help me^^ plz..

Hi Tanna.
Thanks for your reply^^
I create webservice that access my stored procedure.
But not supported.
http://dmp.humaxdigital.com/HumaxCmdwService/Service1.asmx?wsdl
There are two service. (Hello World - Test, prcrelease_test - Stored Procedure )
'Hello World' is supported but prcrelease_test is not supported. I can't drag to storyboard.
Our company's DB is MSSQL2005.
please help me^^

How to access PI/XI Webservice in Visual Composer 7.0 SP14

Hi all,
is there anybody who can describe how to connect to the pi/xi system and access webservices published by the xi, in Visual Composer?
Thank you for your help!
Kind regards, Patrick.

Hi,
There are two ways to get the services into VC.
1St Method.
If you have the Zip file or XML file of your system(which you can get from the portal where these systems configured) then import it in under systemadministration->transport->import ->zip or XML.
then you have to creat a alias for this system and do the usermapping then it will appear in VC
2nd Method.
You have to configure the systems in the portal then you have to creat a alias for this system and do the usermapping then it will appear in VC.
Regards,
Govindu

Consuming Web service in Visual Composer

Hi All,
I have impoerted a z bapi in caf service .I create a web service out of this and try to consume this in Visual Composer .When i do Test data service by right clicking onthe web service and try to execute the web service i get an error saying that , web service could not be executed.
But if i do the same thing for the standard bapi , i get the results .
Could any one help me out.
As well as for some of the webservice (on exposing core services as web services),i try to execute in the wsnavigator ,i get error sayin that ,internal operation not mapped with the external service ,even though i have done the mapping in the caf.

divya,
You have to map your web service to the rfc in your destination systems
goto http://servername:50000/caf
Choose your Web Service from the External Services list,
on the right side choose your remote function calls and select the service then click map.
Regards,
Ahmed Salah

Query regarding calling web services in Visual Composer

Hi Experts,
I am thankful for your help for posting this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e017128
I am following the same steps but I am unable to find the system in visual composer after creating it in portal.
I got another document also related to it...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceea45f3-0c01-0010-049c-c2b001f590fb
But in this document when I am giving the WSDL URL name its not accepting. It is showing as invalid.So I am unable to proceed forward. Please help soon...
Regards
Nutan

Hi Nutan,
Try to define the web service system directly in the portal. Through VC you can encounter problems.
Regards,
Natty

Cannot see created Web Service in Visual Composer Search

I am following the example of chapter 2 of the book"SAP Netweaver Composition Environment". I am trying to search for a web service that has been created, but I cannot find it.
I created a logical destination for the service, named EDMProjectDestination, using nwa->Configuration Management->Infrastructure->Destinations. This was OK, but when I try to search for it in the Visual Composer environment, it does not appear on the list after a refresh or even a system reboot.
Also, when I go back to the Web Services navigator, and try to search by Logical Destination, I am told that there are no logical destinations configured.
Can somebody please inform me what mey be missing here?
BR,
Tony.

Hi,
That did it, thanks!
This is a completely different location to that specified in the book.
BR,
Tony.

Access to Enterprise Services Repository (ESR)

Hello, how can I access an ESR from a simple java console without having to use the Enterprise Services Builder?
- Is there an API available?
- Can somebody point me to a "best practice" for working with the ESR by using Java?
Thx a lot!

Hallo
In the SOA world , there are two components which are critical and they define how one access the services.
They are:
      1. Registry
      2. Repository
Registry is like a yellow pages, it only contains the pointer to the actual service artifact (service artifact can be a WSDL file or service policies, metadata etc). It does not physically hold these service artifacts. It only contains the pointers. Normally all the registries are implemented as UDDI complaint.
Repository is place where you store all the knowledge relevant to a particular service like WSDL, Metadat, policies etc.
The recommended approach is normally access the registry(Using standard UDDI api's) and get a pointer to repository on how to access and execute.
In SAP World, they have registry implemented as UDDI complaint and ESR is an extension of XI Integrattion Repository. ESR is only a design time component, it's not a runtime/execution component.
So accessing a service in the repository has two ways
    - One is Registry way
     or
    - Traditional XI way
Hope it helps
Best Regards
Sreekanth
I

Access data from SqlServer through Visual Composer.....?

Hi Gurus,
I could able to connect SqlServer database from Visual Composer. After that, how can I access table data from sqlserver database?
Thanks in advance....
Ravindra.

Ravindra,
Here is the work around to do this. You will need to create a New System. In the Portal go to System Administration -> System Configuration -> System Landscape. Create a New System from PAR. Select com.sap.portal.systems.BIUDI, click Next. Select SAP_BI_JDBC and enter all the information that you would normally use to connect to a SQL DB using JDBC. You can then in the VC run SQL against the tables. Open VC, and Navigate to the iView level and go to the toolbar and Select BI -> SQL Editor. It is pretty self-explanatory from there.
Regards,
Peter

Consume abap based web Service in Visual composer 7.0

Hi All,
Can any one provide me sample example or PDF on "consume abap based web Service in Visual 7.0 composer" not WSDL based
Help will be appricated by awarding point.
Thanks

Hi,
Try the below link.
Consuming WebService in Visual Composer-1
Hope it helps...
Regards
Basheer

Mobile Alerts via Visual Composer ??

Dear All,
Can we create simple mobile alerts in Visual Composer e.g Goods remaing below certain level etc
Do we need some extra hardware for that. I assume we do need licenses for that
Thanks
Mo

HI Ali,
Chk this doc.......
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5420863c-0a01-0010-c2b8-dd0ececdaffe
Hope this information helps u...........
Assigning Points is the way of saying Thanks in SDN
Regards
Ramakrishna Kmurthy

Web Services in Visual Composer

Hi,
I've created several Web Services in the NWA under SOA Management > Destination Template Configuration.
I added the CurrencyConverter WS with no authentication [http://www.webservicex.net/CurrencyConvertor.asmx?WSDL]
I also added a WS from our ERP system (the URL from SOAMANAGER transaction in R3) with basic HTTP user authentication.
This is giving me the following error in VC when I try to load the services: Could not complete search, Check log for more information.
1) Where do I check this mystical log? If it's the one I can access under tools, I can't retrieve that either due to errors.
2) Without the log, any ideas why I'm not able to call web services?
Regards,
Frederik-Jan

Srinivasan,
Yes, all these settings had previously been checked and so forth. Everything is set up correctly according to whatever guides. SAP hasn't found anything bad with our systems either apparently. However we still get that Internal Server Error 500 each time we try to access the UDDI_DESTINATION ...
Even in Global Settings it's now set to bypass the Proxy at all times when accessing anything on our domain. It still gives the same error ...
New URL for those settings appears to be http://help.sap.com/saphelp_nwce10/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm by the way The one you gave is for the old NWA
Kind regards,
Frederik-jan

Connect to a backend system with the BI connector via Visual Composer

Hi all,
I set up a system landscape on my notebook with the NW2004s ABAP as NSP and with the NW2004s JAVA SP7 as J2E. Both systems are integrated in the SLD, this is set up. Furthermore I installed a BI system alias as NSP_XMLA in the portal with the URL for the backend system: http://localhost:8000/sap/bw/xml/soap/xmla.
I have the same user on portal and backend system NSP. Both have admin previleges.
When I try to logon to the backend system with this URL I get this error:
"No switch to HTTPS occurred, so it is not secure to send a password"
" Choose "Logon" to continue A dialog box appears in which you can enter your user and password"
Then I can logon to the server and get a lot of XML.
But I have to manually logon to the system.
From the portal I cannot logon to the backend system with the test function. I get the error:
Alias is found, but connection failed.
I guess there must be an automatic logon preconfigured.
How can I do this?
Is SSO necessary?
thanks for any help

Hi Gregor,
thanks for your answer, which was intersting but could not solve the problem. In the meantime I discoverd the reason for it.
You have to insert the connection URL to the BW system at 2 points in the system.
1. You have to configure the XMLA connector with the Visual Administrator.
2. You must implement a system in the portal where you configure all necessary information, also the URL to the BW system.
This seems somewhat strange to me because you will then not be able to connect with two or more BW systems to the portal and VC what is centainly necessary in a real world scenario. Anyway I can now see all Infoproviders of the BW system in the VC, and SSO isn't necessary because you configure the information to login to the BW system directly in the configuration of the XMLA connector in Visual Administrator.

No access to Enterprise Services via Visual Composer

Similar Messages

Maybe you are looking for