No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

Hi All,
It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
Is there any way around this if i want to use the 2 at the same time?
How does this work with SharePoint 2013 as i would be doing some migrations?
Cheers in Advance

Hi,
As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
After you choose one of them, you can open the site.
https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
So I think there are some other reasons to cause the issue.
Check these things below:
1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
Settings > SharePoint Designer > ensure Enable SharePoint Designer
is selected).
3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
More references:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
Best regards
Sara Fan
TechNet Community Support

Similar Messages

Why do I get a NI-488 error massage when writing into a file and at the same time copiyng this file with a backup softwarre like Easy2Sync?

I have a small LabVIEW program which writes random numbers very fast into a ASCII-file. I want that file to be copied to a new position every 10 min. Therefor I use a backup/synchronisation software which is doing a copy operation every 10 min. It works fine a certian amount of time and after a while I get either an LabVIEW error (LabVIEW: Fiel already open: NI-488 Comand requieres GPIB Controller to be System controller) or an backup-software error (couldn´t open file...whatever). I´m guessing, it has something to do with file-access but I don´t know why?!? If I run the LabVIEW program and I copy and paste the random-number-file with the windows explorer very fast (pressing ctrl+v rapidly) while LabVIEW is still writing into this file, no error appears. Can sombody help me?
LabVIEW 2011

Hi Serdj,
you don't get a GPIB error, the error number has just 2 different explanations...
Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Please somebody help me lost audio after opened logic 9 and X at the same time helpppp

helppp please lost audio after opened logic9 and X together can't find the solution i only have audio in the main output of my audio interface gott a motu 828 MKII somebody help me please

Hello all looks normal when the problem was presented simultaneously opened LPX LP9 and when you return to open a new project or the same project and I only have audio in my headphones output interface, my interface is a motu 828Mk2 the project exists and the interface looks normal in every normal output comprises all looks normal just never sounds like it had passed but never opened the two programs at the same time not to do, I use a digital mixer yamaha normal surface responds as ccontrolador all seems to work perfect but I only have audio output from the headphones even if I motu channel by channel and I assign output sound headset

[Solved] Sound with ALSA and PulseAudio at the same time?

Hi, I am using arch linux to play Counter Strike on.
While it works fine and all, I just don't get any sound in CS because I am using Mangler, which only seems to work with my microphone if I use PulseAudio.
I hope this is a rather simple issue, basicly, I just want to enable sound in PulseAudio and ALSA at the same time, is this possible?
Last edited by Paaskehare (2010-08-12 15:39:09)

I have read that PulseAudio decreases sound quality, and therefore I would not like to use this as a systemwide driver, but rather only where it is needed.
Please correct me if I am wrong
Edit:
Ok, sound quality isn't noticeably worse, so this will do. HOWEVER, while I am in Counter Strike my sound is delayed by ~1 second, and it is therefore useless, any thoughts on that matter?
Edit again .. Solved this time:
I set my ALSA plugin in winecfg to "Hardware Acceleration: Emulation" - that seemed to do the trick.
Last edited by Paaskehare (2010-08-12 15:38:56)

With my Os X 10.7.5 , I updated outlook for mac, it took a while, kept wanting me to close microsoft database Daemon,finally managed to upgrade to outlook 14.3.2, after new start is EVERTYTHING in outlook Gone. At the same time updated our laptop, with n

with my Os X 10.7.5 , I updated outlook for mac, it took a while, kept wanting me to close microsoft database Daemon,finally managed to upgrade to outlook 14.3.2, after new start is EVERTYTHING in outlook Gone. At the same time updated our laptop, with n

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

When i hold down command and r at the same time after restarting it comes up with a

When i hold down command and r at the same time after restarting it comes up with a black screen and a lock symbol and a field bellow where you would input a password, i have tried ALL of my possible passwords including my password i use for the mac and it stil will not work! all that happens is the text i put in bellow erases itself after hiting enter or clicking the arrow.

I've tried my apple ID password and that doesn't work either . I don't recall seting a password for an encrypted disk either :/ if it was for an encrypted disk, would it be in keychain anywhere? if so how can i find it?
Thanks!

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

Reading and recording at the same time with AudioUnit

Hi,
I am trying to read and record at the same time on the iPhone with AudioUnit. For the reading part I made an AUGraph which works fine, constructed like that:
NewAUGraph(&_graph);
_outputUnitComponentDescription.componentType = kAudioUnitType_Output;
_outputUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
_outputUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_outputUnitComponentDescription.componentFlags = 0;
_outputUnitComponentDescription.componentFlagsMask = 0;
AUGraphAddNode(_graph, &_outputUnitComponentDescription, &_outputNode);
_mixerUnitComponentDescription.componentType = kAudioUnitType_Mixer;
_mixerUnitComponentDescription.componentSubType = kAudioUnitSubType_MultiChannelMixer;
_mixerUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_mixerUnitComponentDescription.componentFlags = 0;
_mixerUnitComponentDescription.componentFlagsMask = 0;
AUGraphAddNode(_graph, &_mixerUnitComponentDescription, &_mixerNode);
AUGraphConnectNodeInput(_graph, _mixerNode, 0, _outputNode, 0);
AUGraphOpen(_graph);
AUGraphNodeInfo(_graph, _outputNode, NULL, &_outputUnit);
AUGraphNodeInfo(_graph, _mixerNode, NULL, &_mixerUnit);
_generatorUnitComponentDescription.componentType = kAudioUnitType_MusicDevice;
_generatorUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
_generatorUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_generatorUnitComponentDescription.componentFlags = 0;
_generatorUnitComponentDescription.componentFlagsMask = 0;
for(int i=0; i< [_urlList count]; i++)
SoundBuffer* soundBufferTemp = [_bufferSoundList objectAtIndex:i];
AURenderCallbackStruct renderCallbackStruct;
renderCallbackStruct.inputProc = MyFileRenderCallback;
renderCallbackStruct.inputProcRefCon = soundBufferTemp;
AudioStreamBasicDescription* inputAsbd = [soundBufferTemp getASBD];
err = AudioUnitSetProperty(_mixerUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
i,
inputAsbd,
sizeof(AudioStreamBasicDescription));
UInt32 zero = 0;
err = AudioUnitSetProperty(_mixerUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Input,
kInputBus,
&zero,
sizeof(zero));
err = AUGraphSetNodeInputCallback(_graph,
_mixerNode,
i,
&renderCallbackStruct);
This works well, for the recording AudioUnit I did the following:
OSStatus err;
AudioComponentDescription audioComponentDescription;
AudioComponent audioComponent;
audioComponentDescription.componentType = kAudioUnitType_Output;
audioComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
audioComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
audioComponentDescription.componentFlags = 0;
audioComponentDescription.componentFlagsMask = 0;
audioComponent = AudioComponentFindNext(NULL, &audioComponentDescription);
err = AudioComponentInstanceNew(audioComponent, &_audioUnit);
UInt32 size;
size = sizeof(AudioStreamBasicDescription);
err = AudioUnitGetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
1,
&_soundFileDataFormat,
&size);
_soundFileDataFormat.mSampleRate = 44100.00;
AudioUnitSetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
kInputBus,
&_soundFileDataFormat,
size);
AudioUnitSetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Output,
kOutputBus,
&_soundFileDataFormat,
size);
AURenderCallbackStruct renderCallbackStruct;
renderCallbackStruct.inputProc = MyRecorderCallback;
renderCallbackStruct.inputProcRefCon = self;
UInt32 one = 1;
UInt32 zero = 0;
err = AudioUnitSetProperty(_audioUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Input,
kInputBus,
&one,
sizeof(one));
err = AudioUnitSetProperty(_audioUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Output,
kOutputBus,
&zero,
sizeof(zero));
err = AudioUnitSetProperty (_audioUnit,
kAudioOutputUnitProperty_SetInputCallback,
kAudioUnitScope_Global,
0,
&renderCallbackStruct,
sizeof(AURenderCallbackStruct));
err = AudioUnitInitialize(_audioUnit);
Then in I setup a file to write in:
- (void) openFile
OSStatus err;
err = ExtAudioFileCreateWithURL((CFURLRef) _soundFileUrl,
kAudioFileCAFType,
&_soundFileDataFormat,
NULL,
kAudioFileFlags_EraseFile,
&_extAudioFileRef);
err = ExtAudioFileSetProperty(_extAudioFileRef,
kExtAudioFileProperty_ClientDataFormat,
sizeof(AudioStreamBasicDescription),
&_soundFileDataFormat);
err = ExtAudioFileWriteAsync(_extAudioFileRef,
0,
NULL);
All this things works well (I check by printing err in the log which I removed here for clarity).
And then in the callback for recording I do the following:
static OSStatus MyRecorderCallback(void *inRefCon,
AudioUnitRenderActionFlags* inActionFlags,
const AudioTimeStamp* inTimeStamp,
UInt32 inBusNumber,
UInt32 inNumFrames,
AudioBufferList* ioData)
OSStatus err= noErr;
AudioUnitRecorder* auRec = (AudioUnitRecorder*) inRefCon;
[auRec allocateAudioBufferList:1 size:inNumFrames*4];
err = AudioUnitRender(auRec.audioUnit,
inActionFlags,
inTimeStamp,
inBusNumber,
inNumFrames,
auRec.audioBufferList);
err = ExtAudioFileWriteAsync(auRec.extAudioFileRef,
inNumFrames,
auRec.audioBufferList);
return err;
(Then I close the file after recording at the same time I close the AudioUnit)
Now the strange thing is that all this works perfectly well in the simulator: I can record and play at the same time but on the device, the callback for recording is not ran (I check by trying to print something in the log in the callback function.) which men no writing in the file and an empty file in the end.
Any one has any idea of what could be causing this?
Thanks
Alexandre

Just in case some one might need it, I solved my problem:
I simply needed to initialize the AudioSession before playing/recording. I did so with the following code:
OSStatus err;
AudioSessionInitialize(NULL, NULL, MyInterruptionListener, self);
UInt32 sessionCategory = kAudioSessionCategory_PlayAndRecord;
err = AudioSessionSetProperty (kAudioSessionProperty_AudioCategory,
sizeof (sessionCategory),
&sessionCategory);
AudioSessionSetActive(TRUE);

Is it possible to change an IDOC and save on the same IDOC number..?

Hi all,
I have an IDOC. When I processed the IDOC, it ended up with error status '51'. There was some problem with the data. So, I changed the data and reprocessed using the T-Code 'WE19' and it was processed successfully. When we reprocess the IDOC using 'WE19', it generates another IDOC number. But, the client is asking that, it should not generate another IDOC number. When we change the IDOC number, it should be saved under the same(ORIGINAL) IDOC number. Is it possible to change an IDOC and save under the same number..? Is there any transaction code to do so. Please give your valuable inputs.
Thanks in advance.
Thanks & regards,
Paddu.

Hi,
You can use the transaction WE09..to edit the IDOC data...
Then use the transaction BD87 to post the IDOC..
Thanks
Naren

My passcode is working to unlock the screen but does not work with restriction passcode. Should they be different?

My passcode is working to unlock the screen but does not work with restriction passcode.
Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
Should restriction passcode be different from what i set?

There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
Do you have a backup which might not have this restriction passcode? If so restore to that backup?

I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

IPhone - how to sync with iPhoto and Aperture at the same time ???

I'm having a really hard time with syncing my photos - I'm using iPhoto and Aperture on my Mac. When I launch iTunes and start managing my iPhone, it seems like I should be able to sync photos from a variety of sources all at once (iPhoto, Aperture, other folders).
However, whichever option I select in the photos drop-down becomes the only libraries that are available to sync. What I mean is that if I select some of the Albums in my iPhoto list and sync those, when I later drill down to Aperture and select albums from there and perform a sync - then the previously synced/loaded albums and photos from iPhoto are automatically removed from the iPhone.
Why can't I sync between multiple photo albums / sources at the same time? This is incredibly annoying.

Here's how I solved this problem:
In Aperture, select File -> Import -> iPhoto Library
Then under the "Store Files" dropdown, be sure "In their Original Location" is select. This will allow Aperture to see your iPhoto library, but it will be managed by reference rather than phyisically imported.
Now, in iTunes, select Aperture as the application from which you want to synch photos, and select the option to synch specific albums.
You should be able to see the names of albums in iPhoto as well as those created in Aperture.

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

Similar Messages

Maybe you are looking for