No accounting effect in quality stock .

Dear Experts ,
I have a scenario where in i donot want to have any accounting effect in in gr done in quality stock .
The accounts will be posted only if the quality check is passed .
How can this be done ?
Regards
Anis

hi,
one more alternative coulf be activate quality managemnt for thr materil.You need to have the quality oarameters created for the same.for more details for this please refer to the below links.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ff/515cf049d811d182b80000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/6334d543a211d189410000e829fbbd/frameset.htm
Regards,

Similar Messages

Mass Transfer Posting From Quality Stock to Return Stock with FI Effect

Dear Gurus,
1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Thanks & Regards
Darvesh

Hi Shoib,
Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Sol: 1 ans is No. You Can not transfer a 1500 material from quality to unrestricted stock, Cause the Transfer of material is based on Either PO or material doument
If you still want to do it Chek with your ABAper to develop a BDC wich can transfer the material and or each PO it should crreate a Accounting Document

How to revert stock in quality stock after qty issued with movemt type 704

Hi Experts,
User issued qty from quality stock to cost centre trough T-Code MI10. Inspection lot against the issue qty has status u201CREL CALC SPCO PRII CROK QLCHu201D This lot has been generated through mov 101 against PO (GR). After doing GR qty posted in quality stock. By mistake user has issued qty from quality stock to cost centre trough T-Code MI10. For same movement type was 704.
Now they want same qty back in quality stock also they want to do UD for the same. How to get back this stock in quality stock?
Awaiting for your expert reply.
Thanks and Regards,
Sandy

hi Sandy,
Quickest and easiest option without lot of configuration and process change for your scneario will be ,
The transaction code is MB0A.
The steps for executing the above trancode is as follows.
Inputs:-
Posting date : UD date.
Movement type : 102
Enter relevant plant, storage location, vendor and the material code
The purchase order/sch.agreement for the given vendor-matl-plant combination will be displayed.
Select the correct PO and click adopt selected.
The material with quantities to be reversed will appear in various line items. Select the correct quantity for which the reversal to be made.
Click adopt + details
Enter storage location
Remove "X" in the stocktype field
Save.
Material document will be generated.
The correct material could be inwarded again and correct usage decision can be taken against this lot.
Get approval from Materials and Finance guys.   As long as your accounting documents nurlifies each other , you should be good to go.
If not you have to use the same proess   witht twiests , with other movement types for which you have activated inspection type.
Hope this helps
Cheers
Rav

Quality stock or not

Hi,
usually at goods receipt (MIGO with code 101) the material is transfered to quality stock,
because in the material quality view the inspection setup is set.
For some GR we don't want a transfer to quality stock, so in MIGO we selected a different stock type (unrestricted use), but this selection does not have any impact.
Is there any way to choose whether the material is transfered to quality stock or not, without changing the settings in material master ?
regards
Iring

Hi,
If you have activated the QM at material master, then the option of stock in PO has no effect on the stock posting at GRN. You have following option -
1) Maintain Quality Info Record for the vendors for which you don't want the stock to be posted to quality inspection & maintain that the Vendor is certified & No quality inspection at GR. For this you will have to maintain appropricate key at material master QM view stating that the delivery relase is required. (Hence you will have to maintain delivery release also in Quality info record)
2) You may remove tick of 'Post to inspection stock' from the respective inspection type in material master QM view, befor posting the GRN.
Regards,
Prashant

Quality stock upload

Hi SAP GURUS,
I want to upload the stock lying in qulaity at the cutoff date. Please guide me on the following issue.
1. What will be the accounting entry,.
2. As stock is in quality we will do miro after this then how grir will be tallied as we are doing only miro.
3. What are the settings need to be done
CHEERS

hi,
the accounting entry should be
Stock a/c DR
To Stock Consumption a/c cr.
The logic is when you move stock for quality you Debit the stock cosumption a/c credit the stock account.

Accounting effect in batch adjustment using MI10 Transaction

Hello
there is a difference between physical stock & actual stock in the SAP system, so i m adjusting the stock using MI10 transaction so can anyone tell me is it right or not? & what is the accounting effect if i m doing this, or i have to use MI01, MI04, MI07. for the same. is there is other way out.
Thanks & Regards
NISHJ.

Nish,
Using MI10 you can perform the Physical Inventory process, basically this transactions combines the functionality of MI01, MI04 & MI07 in one go.
Basically the corresponding Inventory account would get credited or debitted, based on whether Physically Inventory is more or less than system quantity.
Regards,
Prasobh

Third Party Process - Accounting Effects

Hi SAP-SD Gurs,
Can u help me out in Third Party Parocess - Accounting Effects.
Regards,
Sreenivas Peruru

Hi,
Please go through the below thread and your query will be resolved.
Accounting Entries hit in Third party Sales Process
Regards,
Krishna O

Payment block if material is quality stock(MM &QM)

Hi Group,
My client requirement is like
While receiving material against a purchase order to quality stock , the vendor payment should be block(it will not allow for payment or posting invoice). One more thing QM module is not implemented in this client.Is there any such control in MM or any moment type by which we can block payment for the vendor while receiving material.
Thanks
sp sahu

Hi
First let me know, if QM is not implemented, how stock is moving out from QI to Unrestricted?
You can use QM Procurement key in material master Quality View. There may be standard procurment key (0007 - Delivery release and Invoice block). Otherwise you have your own key and assign it in Material master, quality view, Then Invoice will beblocked as long as material is lying in QI.
For this setting, you need not implement whole QM module.
please check and let me know how it goes.
regards
Srinivas

MTS not to consider open PR,PO and quality stock

Dear all,
my client wants for MTS scenario system not to consider Stock of RM for Open Purchase order, Open PR and Quality Stock at the time of MRP run for SFG and FG.
I tried in SPRO settings also in OPJJ( availability check - 02 and checking rule - PP) remove all tick maintain all stock empty and OPJK ( order type PI01 assign to checking rule PP) but system consider stock , how to solve this issue.
pls guide me
sakthi

Hi
Goto OPPQ and slect you plant
Click the Available stock
Check the BOX Indicator: stock in transfer available for planning
In OPJJ check the Incl. PR and Incl. PO for your availability check
try this
Thanks
S.Murali

G/L account ,date, wise material stock display

Hi Experts
My requirement is I need to display G/L accounts(mseg-sakto) material stock(mara) present on a particular date (budat)range.
For this in select-options i am taking sakto as mseg-sakto and datum as bsim-budat.
Now i need to apply select query and fetch data according so that i can show my MATERIAL STOCK as per the G/L A/C choosen on particular date range.
i am displaying material stock in a ALV GRID.
Am i correct in choosing tables and fields for my requirement to fullfill?
should i take some other table or field ?
it is a modification to standared mb5b trnx.

Hi,
Try with tables:
SKA1     G/L Account Master (Chart of Accounts)
SKAT     G/L Account Master Record (Chart of Accounts- Description)
SKB1     G/L account master (company code)
BSIS     Accounting- Secondary Index for G/L Accounts
Regards,
Renjith Michael.

Invoice block for quality stock

Hi
How to block the material for invoice payment i(MIRO) which is laying as the quality stock after did the GR against the purchase order.
for our case, while check the OQB1- the block not happen for the particular material
but for other materils it working fine

Hi
i checked the condrol key . it have the tick mark in blocked invoice and released required.
and more same thing is maintained in another material which is got the invoice block while do the miro.
so it may not be related to material master, q-info record.
so pls tell me anyother posibility which is particular to material and vendor basics .

Remove quality stock

Hi,
we currently have stock in quality inspection, but no inspection lots. I've tried to manually create an inspection lot (QA01) and then in QA11 release this stock to unrestricted. So far, I have not been able to move anything from quality stock. Inspection lot origin is 05.
Are there any specific settings I'm missing?
Thanks in advance!
Br,
Lars

>
Lars H wrote:
> QVM2 could most likely do the trick for me, but now I'm having problems assigning lot quantity to the inspection lot. I guess I need the inspection lot in status SPRQ, but all I get is REL and CALC.
Please understand excisting QI qty you can't assign to manual created insp lot or in other words manual created lot will not get SPRQ status.
If you don't have any lot with status SPRQ that means you can do stock posting with 321 movement tupe with t-code MB1B. During this transaction if you get error message like inventory posting possible in QM only, in this case you can remove qty with cycle/ inventory posting t-code (MI01/ MI04/ MI07).
Hope this helps.
Thanks!!!

From Quality Stock to free stock

Where i can change the kind of stock for a material. I mean, i have 10 units of Material A in quality stock and i want to use this stock in a 201. How can i change it?
Regards

Dear Jorge,
There are following 2 ways to resolve your problem:
1.If 10 units of material were procured and Stock were posted to Quality stock.One Inspection Lot would have generated.Now,You need to first find out inspection Lot and record the results and finally record Usage decision.Steps are as follows-->
a) Search Inspection Lot using T code -QA33 by selecting relevant parameters e.g plant,material,date etc.
b) Record result using T code -QE51N by selecting tab Inspection Lot number and enter the desired Inspecction lot number(searched in first step)
c) Record usage decision using T code-QA11.Allocate Usage decision code from drop down list e.g "Approved" in case of free stock.You may not find "approved" UD as it might be given different name but idea is that you have select the UD code which make the stock free for use.
2.You can post transfer posting using Tcode -MB1B and 321 movement type.
This is how stock could be transferred from Quality Inspection stock to un-restricted stock(free use).
hope it helps..
Regards,
Vineet

Quality stock in planning

dear PP gurus,
In one of the plant, for RM/PM system is not considering quality stock but for SFG/FG it is consider quality stock while planning.
I want system to consider stock for all types of material. Please guide.
Thanks in advance
Kailash T.

Hi
Only following stock can be controlled (this setting is available in OPPQ transaction)
Stock in transit
Blocked stock
Restricted stock
Hence during MRP except the above stock for net calculation all other stock is considered and PR and other receipts are considered for net calculation.
I hope the storage location defined for RM and PM are different from than those of SFG/FG and may be that storage location are excluded from MRP run or check the MRP type for RM/PM
Thses settings in OPPQ are valid for plant specific not material specific.
Plz check and revert back
Regards
Anupam Sharma

Clear Quality Stock

Hello !
Iam having Quality Stock in MMBE for the particular Item.I have to clear the Stcok from the Quality Stock in MMBE. But the Material is not displaying in the QA32 - Inspection screen. Since in Material Master for that Particular Item Quality Status is not in Active it is not displaying in QA32. And since there is stock in the Quality Area I am unable to change the Material Master.I have to clear the stcok from the Quality Area. Is there any Possible way to clear the Stock now. Or any possible way to move the stock to another storage Location from the Current location. Please any body tell me to solve this problem.
-M.Suba

Thanks sir thank you so much.My problem is cleared
-M.Suba

No accounting effect in quality stock .

Similar Messages

Maybe you are looking for