"No active legal regulations found for country US " while trying to create the Customs Import Declaration

Dear Experts,
As part of creating Customs Import Declaration manually, when I selected the FTO and try to use create button I am getting error message .
Can you please help me in this regard .
No active legal regulations found for country US
Ram

Hi Ram,
As the error message straight away tells , you need to activate Legal Regulation for Customs Management ( in standard case, it will be ACE) for US country through the below path:
SPRO-->SAP Global Trade Services-->Customs Management-->Activate Leagl Regulation for Customs Management at Country/Country Group level
In case of any further queries, please let me know it.
Regards,
Aman

Similar Messages

Unable to find any active legal regulations for determination proc. "TEST1"

Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
Carl

Hi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl

No active writeable datasource found for user creation, check your Persiste

HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay Patel

Dear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.

Error message - "Overlapping validity areas were found for country BR"

Hi Experts,
For a certain output type Y953 (e.g. for the shipment 2002355665 related to the DN 3087912658), an error message "Overlapping validity areas were found for country BR" is coming in as error.
The error message is appearing during the idoc processing of the shipment.
This is an incident of Dangerous Goods.
I would like to know if it is technically / functionally possible to find out as to why exactly this mesage is coming and how can we rectify the problem.
From technical point of view we checked that this message was not being called in the SAP system but was dynamically called.
kindly let me know of any breakthrough as this issue is critical as dangerous goods are being transported without needed documents printed.
Thanks in advance.
RIttik

Check whether note 836139 helps you.
thanks
G. Lakshmipathi

TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
Thanks

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

I paid early termination fee two months ago to Verizon and am now out of the country. Am trying to unlock the phone but the local guys say they are not able to. I see from the blog here that iPhone 5 comes unlocked. Is it true?? Do I still have to unlock.

I paid early termination fee two months ago to Verizon and am now out of the country. Am trying to unlock the phone but the local guys say they are not able to. I see from the blog here that iPhone 5 comes unlocked. Is it true?? Do I still have to unlock. How do I go about it?

Thank you for reaching out to us, Texasman. Sad to see that
you have left the VZW family, but it is definitely awesome to be able to
travel! Regarding your iPhone 5, the phone is unlocked for international usage.
Just need an active local SIM card that is compatible with your iPhone. Your local provider
may need to configure some settings under Cellular, but it should pick up signal. Just in
case, make sure that Settings>Cellular>Roaming>Voice & Data are
active.
NicandroN_VZW
Follow us on twitter @VZWSupport

Index for a PSA table is not in the "customer" namespace

Hi,
While loading data through infosource 0CO_OM_WBS_1 to
data target 0IMFA_1 loading failes and the reason given is that the system reads data from PSA table /BIC/B0001060000 of 0IM_FA_IQ_9 and the index generated for this table supplied return code 14.
I found no notes in the subject - with the syntax :
Index for a PSA table is not in the "customer" namespace.
thanks in advance for your help.

Hi,
I think you need to speak to your basis guys / DBA as index created on PSA table is not in your tablespace. He should be able to help you.
Vikash

My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a

My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a way to buy a valid serial number and then 8 stops working again. I’d be happy if the 8 I paid for worked right or I could get 9 for a small cost but I cannot afford $450 or $20/month. I need a permanent solution that I should be already paid for with 8 pro.

After multiple repair procedures with reboot in AA8 I was eventually able to restore the printing to pdf function from various software. However I have again lost my Acrobat tab in Outlook 2007. I need that back, but today an even bigger problem arose. AA8 has stopped printing to fax. It faxes a blank page. The only fax printing option is “Microsoft Shared Fax Driver”. My fax software is “Windows Fax and Scan” and it was working fine just a couple weeks ago. My OS is Windows 7 Professional.
I have tried doing the updates you referred to but I get error messages like these:
“No qualifying products found to apply this update, or update has been already applied”
or
“The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.”

DBD: An error occurred while trying to load the provider for transport odbo

Hello,
I am trying to create universe on top of BPC cube using 'Business Planning and Consolidation' option under SAP Business Objects in Universe Designer ; however when creating connection I am getting following error messgae
"DBD: An error occurred while trying to load the provider for transport odbo. Failed to load library . System error message: The specified module could not be found."
I am using BO 3.1
Is anyone aware of this issue? Kindly assist.
Thanks

We were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike

Error - DBD: An error occurred while trying to load the provider for ...

Error - DBD: An error occurred while trying to load the provider for transport odbo.
Failed to load library. System error message: The specifed module could not be found.
While I am trying to create connection in universe designer to MS Analysis Services 2005.
Thank you - Ashok
Edited by: akojha on Jan 4, 2010 5:27 PM

We were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike

DBD: An error occurred while trying to load the provider for transport sap.

Hi,
I just installed the BO XI 3.1 SP2 & SAP integration KIT 12.0 and could able to import all the roles from SAP client in BO CMC.But when i am trying to create new Universe & creating a connection to SAP it is throwing an error " DBD: An error occurred while trying to load the provider for transport sap.System error message:The specified module could not be found ".
I even applied FIX packs 1.7 & 1.8 for both BOXI 3.1 & SAP Integration KIT,but still throwing the same error.
Could any please help me out in this issue.
Thanks in advance,
Sanjay

Hi,
this looks like a Bug:
Check SAP Note - 1365062
I would recommend installing SP2 for BOXI 3.1
Regards
-Seb.

404 Not Found error was encountered while trying to use an ErrorDocument to handle the request

When I try to go to my website, I get a blank screen and this message:
Method Not Implemented
GET to / not supported.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Can anyone help me fix this bug, please? Thanks!

I did as you said and it worked magic! I didn't even have to restart Mozilla. Thank you so much for your help! :-)

I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file from PDF or to PDF, I get the message "An error occured while trying to access the service. What do I need to do to access the service paid for?

I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file either to PDF or from PDF, I get the error message, "An error occurred while trying to access the service". What do I need to do to get access to the service I have paid for?

Hi DeaconTomColorado,
Please see "Error occurred when trying to access this service" when logging on to Acrobat.com.
Adobe has just released an update to Adobe Reader, so if you're accessing the service via Reader, please let us know whether the update helps resolve the issue.
Best,
Sara

I keep getting the message"an error occurred while trying to access the service". does anyone know what i need to do to resolve this problem. I am trying to convert apdf file for msword?

I keep getting the message"an error occurred while trying to access the service". does anyone know what i need to do to resolve this problem. I am trying to convert a PDF file for ms word?

Adobe Reader is free; but you may have paid for the ExportPDF service.
Contact Adobe Customer Care and click on the Still need help? button to chat with an agent.
[topic moved to ExportPDF forum]

"No active legal regulations found for country US " while trying to create the Customs Import Declaration

Similar Messages

Maybe you are looking for