"no active plan version exists" while adding system in partner profile

Hi,
i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
Can anyone answer me how to do the set active plan version. I asked my functional team and they didnt know how to set it.
Thanks,
Gowthaman.

Thanks Sonia,
in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
Now i am getting different error while creating partner profile in we20..
*Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
    *Message no. E0624*
*Diagnosis*
    *Object CENTRALADMIN of type US is not known in the system.*
*Procedure*
    *Enter a valid object and check the type.*
    *Make sure upper case and lower case are used correctly.*

Similar Messages

HOw to set our Existing Active plan version to The new Created Client.

Hello experts,
I have create two new Clients for idoc processing .
But when i am creating partner profile for my Model View the system gives an "error that no active plan version exist."
is there any way to solve this problem ????
Regards,
Dakshaini.
Moderator message: only one thread per issue, please.
Edited by: Thomas Zloch on Oct 14, 2011 3:43 PM

Please try uncommenting the following line in your method call.
* IS_PRINT = GS_PRINT
Regards,
Rich Heilman

Diff: Version on workflow builder and Maintain Active Plan version on SWU3

Group,
Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
Thanks in advance !
Richard A

Dear Richard Antony,
The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
Like wise there is lots of importance of versioning Workflow.
The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
Hope this will give you a clear picture.
Regards,
Chandrashekhar.

Options to maintain persons in active plan version from a current plan vers

Hi,
We have two plan version currently in use. Plan version 01 in the current status and plan version ZZ in the active status. Few employees are still with the current plan version and are active in the system.
Can anyone guide me how to maintain the Persons that are still with Plan Version 01 and active in the system ?
Because we need to somehow maintain them also with ZZ otherwise our Ugraded system wil not show all reports correctly...This would be considered as Masterdata correction....
I mean how to move the persons from the plan version 01 to active plan version ZZ and how there relationships will be maintained.
Edited by: deepti saxena on Sep 19, 2008 8:49 AM

Hi sikindar,
Thanks for the quick reply. I executed transacn PP01 . I entered the emp id . but when i select the infotype relationship and try to maintain or dispaly it; it takes me to either PA20 or PA30 screen.
Please guide me how to change the plan version of the employees.
Thanks
deepti

How to get active plan version dynamically

Hi all,
I am making some HR reports in which I am pulling up position long text from hrp1001 by giving condition - where plavr = '01' . Now if the active plan version is not 01, my condition becomes vague.
Please let me know how to determine the active plan version dynamically in my sample code below
SELECT APERNR AOTYPE B~STEXT INTO CORRESPONDING FIELDS OF TABLE ITAB_EMP_DEATILS3 FROM PA0001 AS A
INNER JOIN HRP1000 AS B ON BOTYPE = AOTYPE AND BOBJID = APLANS WHERE ( BOTYPE = 'S' AND BPLVAR = '01' AND AENDDA = '99991231' AND BENDDA = '99991231') AND A~PERNR IN PNPPERNR.
SORT ITAB_EMP_DEATILS3 BY PERNR.
DELETE ADJACENT DUPLICATES FROM ITAB_EMP_DEATILS3.

Simply call FM RH_GET_PLVAR

Set active plan versions

Hi,
How to enable new entries(Menu path) in set active plan versions in IMG actvity.
thanks and regards,
naidu.

hey Thanks for the Same ,
yes thats the standard,as i am working on a test client inthe menu path
PM-global settings-plan version maintainance-set active plan version i dont find the standard instead all the fields are hidden ,if i have to make these fields active.
Naidu.

Multiple Logical Systems in Partner Profile for one instance

Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System? If it is possible, can we create Logical System with respect to Plant/Country?

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

Configuring ALE Logical Systems and Partner Profiles

hi,
Trying to build a scenario which deals with two third party systems transfering XML file from one to another. Sender is using a file adapter. Reciever is using an Idoc adapter. However the pre-requisite mentioned for this exercise are that ALE logical systems and partner profiles must be configured (these steps are not outlined in the exercise) . Could i get help on what steps i need to carry out for sender/reciever to configure logical systems and partner profiles.
regards,
Manpreet

Hi Manpreet
At the R/3 system the partner profile should be maintained for both the third parties.
for creating the partner profile go to transaction we20, give the
partner number :your logical system name or customer number or vendor no
partner type:LS(logical system)or ku(customer)OR LI(vendor)
give the message type in the outbound parameters
after this double click on the message type and give the login deatils for the RFC destination define the port and all
if you still have problem please reply back
Thanks
Rinku

Logical system and partner profile configuration

Hi,
I have a SQL server which is defined as a Business system in my landscape. It is sending records to ECC 6.0 which makes it a JDBC to IDOC scenario (inbound IDocs)
First question is do I have to mention a logical system name for the SQL server Business system too ?
Second question is do I create a Logical system in the ECC system (BD54/SALE) for the SQL system or would it be for the client of the ECC system itslef?
Third question is do I maintain partner profile configurations in WE20 for the SQL business system or for the ECC business system?
Thanks in advance.
Cheers,
S

Hi Sam,
> First question is do I have to mention a logical system name for the SQL server Business system too ?
Yes, In SLD You have to specify logical system name of the SQL server business system while creating SQL system.After importing business system into Integration directory,in Adepter-Specific Identifiers you can see logical system name of SQL server business sytem which you defined in SLD.
> Second question is do I create a Logical system in the ECC system (BD54/SALE) for the SQL system or would it be for the client of the ECC system itslef?
Yes,You have to create Logical system in ECC system for SQL system(Logical system name must be with the same name as logical system name you have given in XI SLD in previous question)
> Third question is do I maintain partner profile configurations in WE20 for the SQL business system or for the ECC business system?
In WE20 You have to maintain partner profiles for SQL server Logical system
For example: If SQL server Business system name is SQLDEVBS and logical system name is SQLDEVLS
In ECC you have to create logical system as SQLDEVLS and
Partner profiles for SQLDEVLS in WE20.
Please let me know if you have any issues.
Cheers,
JAG

Wrong logical system for partner profile

Dear gurus,
we have been sending ORDERS Idocs for some time now, using to a logical system called MSC_MM_PRD, a RFC connection called MSC_MM_PRD and a port for Idoc processing called A000000003.
Now, we would like to send ORDERS Idocs to another logical system. We created that new logical system called MES001, a RFC connection (MES) and a Port for IDoc processing using that RFC destination (A00000004).
After that we maintained a partner profile for the new logical system MES001 with outbound parameters for ORDERS Idocs. So far, so good.
But then, I had to create a new message type for purchase orders to use that new connection (called ZEDI) and I guess that is where I made a mistake: I copied the existing message type for the old ALE connection and changed some parameters (like name etc.).
Now, when I create a new purchase order and add a message of the new type and save the order, I get an error message:
EDI: Partner profile outbound process code not available
Message no. E0335
Diagnosis
An outbound partner profile could not be found with the following key:
/MSC_MM_PRD/LS//EF/ZEDI//
[u2026]
Procedure
Please check the outbound partner profiles for the assignment of the process code:
As you can see, SAP tries to find an outbound partner profile using the old logical system (MSC_MM_PRD) and the new message type (ZEDI) as a key and obviously fails.
Can anyone please tell me why SAP uses the old logical system and how I can change that?
Cheers
Alicia

Hi,
problem was, that we had not created a proper distribution model for the message type (BD64). After we did that, it worked fine.
Cheers
Alicia

How system pick partner profile in order/invoice

Hello Experts,
In invoice [VF03], I could see system determine output type RD00 and partner function BP so system is taking Bill to party from invoice and putting there. I checked the output condition record for that invoice [VV33] there there partner number is not assign to partner function BP. I understand this.
BUT my questing is, How system is picking partner profile to create the Idoc for that invoice??
Partner profile and Bill to party both are different.
How Idoc creating process start when we save sales order/ Invoice ???
I want to know the triggering point from where system start idoc creating for sales order/ invoice ???
Thanks

INBOUND processing the IDOCs are transferred to the interface and stored in te SAP system. The document data is generated in the course of workflow.
In this section the SAP system is made known to the upstream system (startrfc program parameters). Conversele, the upstream system is made known to the SAP System via the port definition.
INBOUND Processing - Create Function Module.
This function module is called when a message type, of the ZINVRV, comes into the receiving system. This needs to be configured. The function module is passed the IDOC as a parameter.
Use the T.code WE19 to test inbound function module in debugging mode.
Use the T.code EW05 to view the IDOCs and their statuses.
Rewards if useful.

Activating IS on existing ERP 6 system

Hello
we have a live ERP6 (EHP4) system that is running core ERP functionality. We wish to activate the IS-Media solution on the same instance.
Is it OK to activate a IS on an already live ERP system? - are there any risks we need to consider?
Is it activated via business fucntions?
thanks

it is technically possible to use BW from within an ECC 6.0 instance. You need to install BI_CONT 704 to use SAP contents.
But, I personally do not recommend this scenarios. SAP and Oracle parameters are usually set differently based on its usage. SAP recommends different parameters for BW and R/3. so, it's better to use these usages in different systems.

Error While Adding System Landscape

Hi Experts,
I have requirement for inter company transaction, so i installed B1iServer, B1iEventSender and DI Proxy.
i went Programs->B1i Platform -> Administration.htm. I have created one System Landscape called "Server1" in B12007 type.
I have inserted all data related to System Landscape object "Server1"
For Example :
B1 Server : 10.20.18.8
License Server : 10.20.18.8:30000
DB Name : OEC_Computers
SQL Server : 2005
DBUserName : sa
DBPassword : sa
UserName: B1i
Password: 1234
JCO Path : C:\Program Files\SAP\SAP Business One DI API\JCO\LIB (Where the JCO Installed)
diProxyHost : 10.20.18.8 (DI Proxy Service is running on machine)
diProxyPort : 2099 (default)
When i try to click SAVE Button. In InternetExplorer Status showing "Automation Server cannot create object". It is not saving the information.
Please assist me for go further and how to correct this issue.
Thanks in Advance,
Regards,
G.Suresh

Hi Eddy,
Now i can able to add system landscape. Thanks you very much and love you.
Tell me one thing, Now i have created 2 landscape. I have to do Integrate two landscape. Where i have to go and do it.
I have seen Application Manager-> Manage Application -> under it there is no option to choose Subsidiary Integration Console.
Please assist me for gohead.
Regards,
G.Suresh

Source System Connection - Partner Profile Not Available

Alright guys,
My Basis Team have undertaken a 'copy-back' of PRD data in R3 to QA and this means I have lost my partner profiles in BW QA. I have looked at the other threads with regard to 'Partner Profiles', but one simple question - do I need to recreate the connection of just choose 'Restore'.
Thanks
Scott

Hi Scott,
Try to follow up all these .. hope ur issue wil resolved
http://help.sap.com/saphelp_bw31/helpdata/en/dc/6b808e43d711d1893e0000e8323c4f/content.htm
Very Urgent! Cannot execute RSA1
Partner Profile config?
https://www.sdn.sap.com/irj/sdn/advancedsearch?querystring= partner profile&searchpluginname=sdn_forums&selectedcustomprops=resourcetype(value=sdn_forum)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fbc21369-0601-0010-64bf-83b7b8c1ac92 --- PDF file(u can find here partner pfofile information)
Let m e know the futher inf
-Shreya

General structure & Plan version in OM

Hi everyone,
i am trying to configure OM for 1 general businss case.
now i got a link in the easy access menu named as General structure and Plan version.
Please let m eknow whats the role of these 2 in OM.
Thanks in advance,
Praveen
Edited by: Praveen Kumar Tiwari on Aug 3, 2009 3:28 PM

Hi Praveen,
In OM, you can create all objects and their relationship to create Org Hierarchy.
There are various method available to create all obejcts in OM like Organization and staffing method, General structure through which you can create and their relationship. You can create also evaluation path thorugh general structure. Evaluation path is nothing but chain of relationship between objects.
Plan version:- Plan versions allow you to create several organizational plans in the system at the same time. You can simulate and compare various scenarios using plan versions. A plan version also enables you to carry out various simulations and compare plans in the system in parallel. As a rule, only one plan version depicts your enterprise's current organizational plan
Path:- IMG  Personnel Management  Global Settings in Personnel Management  Plan Version Maintenance  Maintain Plan Versions (Tcode-OOPV). You can set active plan version by using switch PLOGI PLOGI by giving 01(OOAP) under this 01-active paln version, you can create all objects and relationship.
Regards,
Purnima

"no active plan version exists" while adding system in partner profile

Similar Messages

Maybe you are looking for